submitted | available | document details (if available) | source link |
---|---|---|---|
July 11 2019 | July 11 2019 | TWS 真无线蓝牙耳机说明书0929-EN-V1.3 Adobe PDF library 15.00 |
various | User Manual | Users Manual | 1019.21 KiB | July 11 2019 |
Overview Charging box Charging port Earphones Wearing earphones MT1 User maunal Touch panel Indicator light Charging indicator Charging Charging contact Microphone Battery state button Charging thimble Comforms to ergonomic half-ear design, stable and comfortable to wear. Connect the USB cable to charge both the ea-
rphones and charging case.Under the charging st-
atus or press the battery state button of the charg-
ing box, the power indicator light will flash red. Corresponding to the different power relationship as follows:
Battery percentage Indicator light states Chage 75% to 100% Red light flashes 4 times Chage 50% to 75% Red light flashes 3 times Chage 25% to 50% Red light flashes 2 times Chage 0% to 25% Red light flashes 1 times The earphones indicator states the following:
Earphones Indicator light states Low battery tips Red light flashes 2 times Pairing status Red and blue lights flash alternately Pairing successfully light go off 1 2 3 4 Play/Pause Music When the earphones connected to device, short press the touch panel to pause/play music. Note: The music player shoud be running. short press Switch to previous/Next Song When the music plays, double-click the left earphone to play previous song and double-click the right to play next song. double click Turn on voice assistant When the earphones connected to device, press and hold the touch panel over 2 seconds to activate voice assistant. Note: The device needs to support voice functionality and be on quick activate status. Key features Bluetooth 5.0 Two-in-one storage and charging box Split wireless design (left and right can be used individually) Press and hold 2 seconds L R 4hr 4 hours of listening Truly wireless technology Simultaneous BT Transmission 10 11 12 Product specification Product Name: True Wireless Earbuds Product Model: MT1 Earphones Dimension: 3217.324mm Net weight in one earabout 6g Communication distance: 10 m (barrier-free open space) Battery capacity: 50mAh (single headset) Charging time: about 1.5 hours Talk Time: About 4 hours Standby time: About 150 hours Input : 5V 100mA Battery Type: Lithium-ion Polymer Battery Bluetooth version: Bluetooth 5.0 Charging box Dimension7047.335mm Input5V 360mA Output 5V 110mA Charging timeabout 1.5 hours Battery capacity 400mAh Battery Type: Lithium-ion Polymer Battery 13 WARNING 1. Do not disassemble, repair or modify the headset for any reason, as this may cause fire or even complete damage to the appliance;
2. Do not place the device below 0C or above 45C;
3. Avoid the eyes of children or animals when using the device indicator;
4. Do not use the device in thunderstorms, which can cause abnormal operation of the equipment and increase the risk of electric shock;
5. Do not wipe the appliance with alcohol and other volatile liquids;
6. Avoid contact with liquids. ATTENTION 1. If the product has not been used over two weeks, it is recommended to charge the product before use;
2. It is necessary to select a national certified charger produced by a regular manufacturer;
3. Continuous use the headphones for a long time is detrimental to hearing health, please control the using time and volume reasonably 4. Using headphones reduces the perception of external sound, please do not use them in environments that may pose a threat to safety. 14 Power on When the earphone is in charging box, It will be automatically powered on by taking it out of the charging case. If the earphone is not in the charging case and is turned off, Please press and hold the touch panel until you hear the voice power on, It maybe spends 1.5 seconds. Press and hold about 1.5 seconds. Power off Put it in the charging case and the headset shuts down automatically. On power on state, press and hold the touch panel until you hear the voice power off, It maybe spends 6 seconds. Press and hold about 6 seconds. 5 FCC STATEMENT NOTE: This equipment has been teed and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection again harmful interference in a residential inallation. This equipment generates uses and can radiate radio frequency energy and, if not inalled and used in accordance with the inructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in aparticular inallation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver. Use twins earphones Auto-connect: Pick up both earphones from the charging case at the same time ,They will be auto powered on and on pairing mode , turn on the device's Bluetooth, search "Maxcio-MT1" and tap to connect earphones. If the connection fails, put the earphones back in the charging case and repeat the above.After the first connection, the earphones can be switched on automatically back to the last paired device (Bluetooth needs to be turned on). Press and hold about 1.5 seconds to power on Indicator light Use single earphone Auto-connect: Pick up any earphone from the charging case, turn on devices Bluetooth, search "Maxcio-MT1"
and click to complete the connection.After the first connection, the headset can be switched on automatically back to the last paired device (Bluetooth needs to be turned on). Earphones reset 1.Take the earphones out of charging case and press for 6 seconds to turn off. 2.Under power off state, Press and hold two earphoness touch panel over 10 seconds to clear the paired records between earphone and mobile devices. Feature points The following features are available to the left and right earphones. Answering/hanging up calls Short press touch panel to answer incoming call;
And short press again to end current call . Auto-shutdown Press and hold about 1.5 seconds to power on Indicator light No connection over 5 minutes , Or connected but not any music/voices transfer even no operations over 5 minutes , the earphones will be auto powered o to save battery. Short press Refuse a call Press and hold the touch panel 1 second to refuse the incoming call. 8 Press and hold 1 second 9 Manual connection: When the earphones are turned off, manually turn on the two earphones, the red and blue light alternately flashes into the pairing state,then turn on the devices Bluetooth to connect. 6 Manual connection: When the earphone is turned off, manually turn on the earphone, the red and blue light alternately flashes into the pairing state, then turn on the devices Bluetooth to connect. 7
-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device mu accept any interference received, including interference that may cause undesired operation. 16
This product uses the FCC Data API but is not endorsed or certified by the FCC