FCC ID: 2A4IP-JM-RM01 Remote Controller

Areas of application:

Manual Remote control switches,alarm systems, , remote control door locks, remote control electric shutter doors and Windows, water pump control, industrial control products, etc.;

technical parameters:

Working voltage: DC6V Working frequency: 433.92 MHz Standby current: 0MA Working current: > 20MA Encoding Type: fixed code (2264) and learning code (EV1527) Transmission distance: > 30 m (open area sensitivity more than 103 dBm) Output power: 30 m (0 DBM);

Transfer rate: < 10 KBPS Modulation mode: ASK (amplitude modulation) Working temperature: - 10 ~ + 70 Size:30 * 60 * 12 mm

* Tips: 1. This series of remote wireless remote control with 1/2/3/4key optional;

2.With the power switch, remote control can turn off the power save electricity when not in use. Federal Communications Commission Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two co nditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance co uld void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable p rotection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the inst ructions, may cause harmful interference to radio communications. However, there is no guarante e that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of f and on, the user is encouraged to try to correct the interference by one or more of the followin g measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is con nected.

-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in p ortable exposure condition without restriction.

ETE YL eerie AOS A 0 ine St wn

| 22 a a a a oe a oe ae 4 S@ 4G GG8a oe. *S SSL se RRR REST EREEERBEREAEAE MMA MD XMM OS

Shenzhen Jiaomao Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2A4IP-JM-

RM01 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Descriptionl File Name Block.pdf Sch.pdf OPS.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for an initial period of _(ie- 45, 90 or 180) days:

Exhibit Type File Name Sincerely, Clients signature:

Clients name & title: Gleen Xiang / Oversea Sales Director Contact information /address: 502, Building 6, No. 72, Xikeng Road, Xikeng Community, Fucheng Street, Longhua District, Shenzhen Date: 04/17/2018 VCB_F-01: Operating Procedures Form FCC Confidentiality v02 Page 1 of 1

Shenzhen Jiaomao Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2022/06/26 SUBJECT: FCC Application for (FCC ID: 2A4IP-JM-RM01 ) To Whom It May Concern:

We, the undersigned, hereby authorize Jade Yang in Shenzhen DL Testing Technology Co., Ltd.. at 101-201, Building C, Shuanghuan, No.8, Baoqing Road, Baolong Industrial Zone, Baolong Street, Longgang District, Shenzhen, Guangdong, China on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Hyperkin, inc on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Clients signature:

Clients name & title: Gleen Xiang / Oversea Sales Director Contact information /address: 502, Building 6, No. 72, Xikeng Road, Xikeng Community, Fucheng Street, Longhua District, Shenzhen Date: 04/17/2018 VCB_F-01: Operating Procedures Form FCC Authorization v02 Page 1 of 1