Specifications and User Manual TWS EARPHONE T2 Earphone Basic Specifications Sizesingle-earphone23.6x16.3x23.7mm) Weight(single:4.6g) Earphone Charging Port:magnetic type Touch Button: 1 (MFB ) Charge indicator:Flashing blue light (Charging) / light off (Charging completed) Battery :55mAh(One earphone) Earphone Charging Current:55mA Earphone Charging time: 1Hour Working Voltage:3.3V-4.2V Play music current: MAX 18mA Talking current: MAX 18mA Power Off current: 13umA Standby time:40hrs Earphone with Charging case:
Music Time9~10 Hours Talking Time9~10 Hours Earphone(single charge) Music Time3~3.5 Hours Talking Time3~3.5 Hours Working time of main earphone in the state of two earphones3.5Hours Bluetooth VersionBluetooth 5.0 Chipset SolutionBES2000 Support ProfileHSPHFPA2DPAVRCP 1 / 5 The remote control to speaker: MFB (Play/Pause/Stop, Volume+/Volume-, Next song, Previous song) Paring nameT2 Password0000 RF input impedance50ohm RF Receive sensitivity-89dBm Transmission Range (Hz)2.40GHz~2.48GHz Transmission distance: 10m TWS function: after two earphones pair and connect, they can work as true wireless stereo earphone Audio sampling accuracy16bits Audio sampling rate: Up to 96 kHz Audio encoding formatCVSDmSBCSBCAAC SNR>95dB Working temperature-15+60 Working humidity: 10%~85%( in a non-frozen state) Speaker Basic Specifications Speaker specifications / mode: 6mm Impedance: 16/ typ Frequency(Hz): 20Hz20KHz Sensitivity: 933dB Input Power: 2 mW ( normal), 5mW ( maximum) MIC Basic Specifications MIC Typesilicon MIC MIC sensitivity: -423dB SPL130dB Basic Specifications of Charging box Size79x32x32x32mm Weight53g Charging port Micro USB Charging LED indicator/charging completed indicator:Flashing blue light/display 100 Charging box(Full) provide power to earphones: 2 times Battery:400mAh Charging time : 2.5hrs Input Voltage :DC5V Charging current:250mA Output VoltageDC5V Discharge current55mA Working temperature: -15+60 2 / 5 Working humidity: 10%~85%( in a non-frozen state) Operating Instructions Power ON When the earphone is off, remove the earphones from the charging case, power on automatically, The LED indicator will flash for one second in blue. Earphone with Power on prompt tone. Power Off When the earphones is power on, put earphones into the charging case, earphones power off automatically . Pairing with Phone 1Remove R & L earphone from the charging case at same time, after automatically turn on R & L connected automatically in 10 seconds,with power on TWS connected prompt from each earphone, R & L connection is finished;
2After the left connect to the right, Right with pairing prompt tone, the LED indicator flashes blue;
3On your device, go to Bluetooth menu, select for: T2, pair and connect. You will hear Connected when pairing is complete. Notes:
Music & calls function ,R & L is synchronous;
Voice assistant Triple-touch the right earphone(Master) to active voice assistant. Answering calls If a call comes in when listening to music or headset is standing by, touch once time the MFB to answer the incoming call. If the music is playing, it will pause automatically during the call, the music will start playing automatically. Reject Calls If a call comes in, touch and hold the MFB button for 3 seconds to reject the incoming call. End Calls Touch once time the MFB to terminate when you finished your call. Pairing Left&Right earphone Guide:
1. Put both earphones back to the charging case. then Pick out the both earphone from the charging case;
2. Make sure both of earphones didn't connected with any devices;
3. Touch and hold the main button of both earphones for 3 seconds, You'll hear "ding". While the indicator light was flashing blue;
4. Wait until you hear "TWS Connected" from both earphones, Pairing done. If no voice after master & deputy earphone connection ,put earphone R & L into the charging case, then pick up earphone R & L at same time. Earphone R & L reconnect the device after earphone connection. TWS earphone reconnection: earphone R & L connection automatically after earphone paired once time, with TWS connected prompt tone. Music Play Operating Music Play Operate on the phone or touch MFB of the earphone (Music will play automatically on some mobile phones when it connect with Bluetooth device) Pause and Restart Music 3 / 5 When listening to music, touch MFB to pause music and touch MFB again to restart music. Play Previous Song Double touch left earphone to go back one track. Play Next Song Double touch right earphone to go to the next track. Answering the incoming call in music playing:
Touch once time the MFB ( music will pause ) Reject the incoming call in music playing:
Touch and hold the MFB button for 3 seconds Volume Up Touch and hold the MFB of right earphone Volume Down Touch and hold the MFB of left earphone. Play/Pause Previous Song Next Song Volume +
Volume -
Answer/End a call Reject call Voice assistant Left earphone (L) X1 X2 Touch and hold X1 Touch and hold for 3 seconds Right earphone (R) X1 X2 Touch and hold X1 Touch and hold for 3 seconds X3 Earphones LED Indicator Status Charging Flashes blue LED Light Charging Complete Light off Power ON Power Off Pairing Mode Battery Low Blue LED light flashes for one second Blue LED light flashes for one second LED light flashes blue Every 30 seconds with reminding tone battery low Notes:
It will turn off automatically after 5 minutes if without any connection with mobile phone when it turns on. Pairing time: 3 minutes. It will quit the pairing mode automatically after 3 minutes if without any connection with mobile phone when it is in the state of pairing. In addition, display battery state on Apple devices. Charging case operation Charging case LED Indicator Status 1. Charging :Blink blue 2. Charging completed :Display 100 3. Low battery (pull charging case):Display light flashing 4 / 5 FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. 5 / 5