FCC ID: 2AQJJJT20 Walkie Talkie (FRS)

FCC Caution Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. To maintain compliance with the FCCs RF exposure guidelines, hold the transmitter and antenna at least 1 inch (2.5 centimeters) from your face and speaker in a normal voice, with the antenna pointed up and away from the face. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to compliance with the FCCs RF exposure requirements, the antenna installation must comply with following:

Users must be fully aware of the hazards of the exposure and able to exercise control over their RF exposure to quality for the higher exposure limits. Your wireless hand-held portable transceiver contains a low power transmitter. This product sends out radio frequency (RF) signals when the Push-to-Talk (PTT) button is pressed. The device is authorized to operate at a duty factor not to exceed 50%

Specific Absorption Rate (SAR) information SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level,the actual SAR level of the device while operating can be well below the maximum value. Before a new model is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, tests for each product are performed in positions and locations as required by the FCC. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal. ISEDC warning This device contains licence-exempt trans mitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible dencompromettre le fonctionnement. This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme aux limites d'exposition aux rayonnements RF de l'ISEDC dfinies pour un environnement noncontrl. Cet metteur ne doit pas tre situ ou fonctionner conjointement avec une autre antenne ou un autre metteur.

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Shenzhen Jizhida Technology Co., Ltd 1902E., BLDG.C6, HENGFENG IND. CITY, NO.739, ZHOUSHI RD., HEZHOU COMMUNITY, BAOAN DIST., SHENZHEN, China Tel: +86 755 28702786 Fax: +86 755 28702786 Email: jacky_cheung@hunicomtech.com FCC Authorization Date: 2019-12-23 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We Shenzhen Jizhida Technology Co., Ltd, the undersigned, hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: J w cy Crew Jacky Cheung R&D Manager QA-FR-170-B 7/29/2014

Shenzhen Jizhida Technology Co., Ltd 1902E., BLDG.C6, HENGFENG IND. CITY, NO.739, ZHOUSHI RD., HEZHOU COMMUNITY, BAOAN DIST., SHENZHEN, China Tel: +86 755 28702786 Fax: +86 755 28702786 Email: jacky_cheung@hunicomtech.com FCC Confidential Authorization Date: 2019-12-23 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AQJJJT20 In accordance with Sections 0.457 and 0.459 of the Commissions Rules, Shenzhen Jizhida Technology Co., Ltd hereby requests long-term confidential treatment of information accompanying this application as outlined below:

e Block Diagram e Schematics e Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Joucky Chewy Jacky Cheung R&D Manager

Shenzhen Jizhida Technology Co., Ltd 1902E.,BLDG.C6,HENGFENG IND. CITY, NO.739, ZHOUSHI RD., HEZHOU COMMUNITY, BAOAN DIST., SHENZHEN, CHINA Tele: +86 755 28702786 E-mail: jacky_cheung@hunicomtech.com Product Similarity Declaration 2019-11-27 To:

FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, Shenzhen Jizhida Technology Co., Ltd hereby declare that we have a product named as Walkie Talkie (FRS) (model: JT20, FCC ID: 2AQJJJT20) was tested by BACL, Meanwhile, for our marketing purpose, we would like to list a series model (JT20-1, KD10, RB16, RB616, JT20-2, JT20-3, JT20-4, JT20-5, JT20-6) on reports and certificate. The difference among them is model name. No other changes were made to them. We confirm that all information above is true, and well be responsible for all the consequences. Please contact me if you have any question. Sincerely Yours, Signature:

Jacky Cheung R&D Manager