4-IN-1 RETRO TURNTABLE 4-IN-1 RETRO TURNTABLE SYSTEM WITHBLUETOOTH SYSTEM WITHBLUETOOTH WIRELESS TECHNOLOGY WIRELESS TECHNOLOGY Owner's Manual PLEASE READ BEFORE OPERATING THIS EQUIPMENT. MODEL:CD695 Size: 148.5(W) x 210(H)mm (A5) IMPORTANT SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT S EMOVE COVER (OR BACK). NO USER-SERVICEABLE ART R I NSIDE UALIFIED ERVICE PERSONNEL. EFER SERVICING T O Q
. R P S The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product`s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance. WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not Installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CALIFORNIA PROP 65 WARNING:
This product contains chemicals known to the State of California to cause birth defects or other reproductive harm. For more information on these regulations and a list of chemicals, log on the following website:
http://www.oehha.ca.gov/prop65.html FCC WARNING:
To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Modifications not authorized by the manufacturer may void user`s authority to operate this device. EXERCISE CAUTION AS UNIT HAS SHARP POINTS. 2 IMPORTANT SAFETY INSTRUCTIONS Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1) Read these instructions. All the safety and operating instructions should be read before the product is operated. 2) Keep these instructions. The safety and operating instructions should be retained for future reference. 3) Heed all warnings. All warnings on the product and in the operating instructions should be adhered to. 4) Follow all instructions. All operating and use instructions should be followed. 5) Do not use this apparatus near water. Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool. 6) Clean only with dry cloth. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11)Only use attachments/accessories specified by the manufacturer. 12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. An appliance and cart combination should be moved with care. Quick stop, excessive force and uneven surfaces may cause the appliance and cart combination to overturn. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped. 15) Power source This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other source, refer to the operation instructions. 16) Power lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 3 IMPORTANT SAFETY INSTRUCTIONS 17) Overloading 18) Object and liquid entry Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. Never push objects of any kind into the product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product. 19) Outdoor antenna grounding If an outside antenna is connected to the product, be sure the antenna system is grounded so as to Provide some protection against voltage surges and built up static charges. Section 810 of the National Electric Code ANSI/NFPA 70 provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge product, size of grounding conductors, location of antenna-discharge product, connection to grounding electrodes and requirements for the grounding electrodes. 20)Service 21)Replacement parts 22)Safety check Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts. Unauthorized substitutions may result in fire or electric shock or other hazards. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 32
)Damage requiring service Unplug this product from the wall outlet and refer service to qualified service personnel under the following conditions. a) When the power-supply cord or plug is damaged. b) c) d) If liquid has been spilled or objects have fallen into the product. If the product has been exposed to rain or water. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an adjustment of other controls may result in damage and will require extensive work by a qualified technician to restore the product to its normal operation. If the product has been dropped or the cabinet has been damaged. When the product exhibits a distinct change in performance-this indicates a need for service. e) f) 2 )Note to CATV system installer 4 This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. NOTE: Refer all servicing to qualified service personnel. Servicing is required when the unit has been damage d n any way such as the following: the power-supply cord or plug has been damaged, liquid has bee i pilled into unit, the unit has been exposed to rain or moisture, the unit has been droppe s ot operate normally. n d o n r the unit doe s 4 Power Source Insert the AC/DC Adapter power plug into a conveniently located AC outlet having AC 120-240V~,50/60Hz. AC outlet AC/DC Adapter To the DC IN jack of the rear of the unit. Open/close the turntable cover 1. Lift the turntable cover. 2. Pull the arms to front to lock it as the figure on left. 1. Lift the cover. 2. Push the arms to backward to release the lock. 3. Close the cover. 5 Location of Controls Turntable B C D E F A Before use, take out the stylus guard ( white plastic cover ) by pull it out. Front View Rear View
/ AON UX FM O HP T B A M VOLUME 1 2 3 4 5 1 ANT L R DC IN AUX LINE OUT 6 7 8 9 6 A turntable B C 45 RPM adapter cue-lever D tone arm holder E speed selector F tone arm 1. Speaker 2. Function Knob 3. Tuning knob 4. Volume Knob 5. Indicator 6. Antenna 7. AUX Jack 8. LINE OUT Jack 9. DC IN Jack Listening through Bluetooth
/ AON UX FM O HP T B A M VOLUME 1. Turn the VOLUME Knob clockwise until a sound "click" is heard to turn on the unit, the indicator will light up. VOLUME 2. Turn the function selector to the "BT" position, the indicator will light up Blue and blink fastly, now it is ready for pairing.
/ AON UX FM O HP T B A M 3. Activate the Bluetooth function in your player(e.g. Mobile phone) and try to sear and pair. 4. The pairing name will appear on pairing list and choose it to make pairing. CD695 5. It will send a sound after successful pairing and connection, the indicator will stay lit. 6. During playing, the indicator will blink slowly, adjust volume level by volume knob. NOTE:
After first time pairing and connection, the unit can be paired and connected with the device connected before. 7 Listening to a Record 45 RPM Adapter
/ AON UX FM O HP T B A M VOLUME NOTE:
Before use, take out the stylus guard(white plastic cover). Before use, make sure there is no 3.5mm audio cable plugged in the AUX jack on rear of the unit. 1. Turn the VOLUME Knob clockwise until a sound "click" is heard to turn on the unit, the indicator will light up. 4. Select the speed. 33 45 78 VOLUME 2. Turn the function selector to the "PHONO/AUX" position.
/ AON UX FM O HP T B A M 5. Put the record on the turntable. If playing the small size 45 rpm record, insert the supplied adaptor to the center spindle before placing the record. Step 2 Step 1 45 RPM adaptor 3. Open the cover. 6. Unlock the clip to release the tone arm as the figure below. clip 8 7. Raise the leve to lift the tone arm as the figure below. 10. Turn the volume knob to adjust the volume level. tone arm lever VOLUME 8. Move the tone arm to the top of the record. The turntable will start to run. 11. When finished listening, replace the tone arm to the arest and lock it as previous procedure. Turn the VOLUME Knob counterclockwise until a
"click"sound is heard to power off the unit. 9. Place the tone arm to the desired point on the record by turning the lever as the figure below. lever 9 Listening to the Radio 1. Turn the VOLUME Knob clockwise until a sound "click" is 4. Turn the VOLUME Knob to adjust the volume level. heard to turn on the unit, the indicator will light up. VOLUME VOLUME 2. Turn the function selector to the "FM" or "AM" position.
/ AON UX FM O HP T B A M 5. When finished listening, turn the VOLUME Knob counterclockwise until a sound "click" is heard to power off the unit. 3. Turn the tuning knob to receive the desired radio station. Antenna:
AM
- This unit has a built-in ferrite rod antenna, which provides adequate reception in most areas. If reception is weak, turn the unit to improve reception. FM
- The FM Antenna wire is for FM reception. If reception is weak, unwind and extend the wire or relocate the wire to improve the radio reception. 10 Other Connections AUX IN:
1. Connected the external audio device to the unit by an audio connection cable with 3.5mm stereo mini jacks as:
~ Insert one end to the Phone; Line Out or AUX Out Jack on the external audio device.
~ Insert the other end to the AUX jack on the rear of unit. LINE OUT:
1. Connected the external audio device to the unit by a cable with RCA plugs ( cable not included ) as:
~ Insert one end to the Line IN or AUX IN jacks on the external audio Amplifier.
~ Insert the other end to the LINE OUT jacks on the rear of unit. ANT L R ANT L R DC IN DC IN AUX LINE OUT AUX LINE OUT To AUX jack on the rear of the unit Mobile Phone Connect to the Phones; AUX Out;
Line Out Jack of the external devices
(Such like MP3 Player; cell phones;
iPod/iPad ... etc)
(Connection Cable not included) To the Line In/AUX In To the Line In/AUX In jacks on the external jacks on the external audio Amplifier audio Amplifier
(Audio Connection Cable supplied) 2. Turn the VOLUME Knob clockwise until a sound "click"
2. Turn the VOLUME Knob clockwise until a sound "click"
is heard to turn on the unit, the indicator will light up. is heard to turn on the unit, the indicator will light up. VOLUME VOLUME 3. Turn the function selector to the "PHONO/AUX" position. 3. Turn the function selector to the "PHONO/AUX" position.
/ AON UX FM O HP T B A M
/ AON UX FM O HP T B A M 4. Plays the music on the connected external audio device as usual. 5. When finished listening, turn the VOLUME knob counterclockwise until a "click" sound was heard to power off the unit. Notes:
Make sure the sound output level of the connected device is in high level. If sound is distortion, reduce the sound output level of the external audio Otherwise, sound will weak. device. 4. Plays the music/radio as previous procedures. Sound will be heard from the external audio Amplifier system. Adjust the volume level by the volume control on the Amplifier.
(If do not want to hear the sound from this unit at the same time, turn the VOLUME knob to minimum position). 5. When finished listening, turn the VOLUME knob counterclockwise until a "click" sound was heard to power off the unit. 11 Records Handling How to replace the stylus Replace the stylus 1. Use a screwdriver to push the stylus off then pull it out as the figures below:
2. Install the new stylus as figures below:
12 If you experience any problems with the unit, please take a monent to look through this chart and see if you can solve the Troubleshooting problem yourself before you call your dealer. No power:
Check the connection of AC wall outlet. No sound:
Rising the volume level by turn the VOLUME knob clockwise. Noisy sound:
The unit is too close to a TV set or similar appliances. Relocate the unit. Radio:
Can not listen to any station, or signal is too weak. Tune the station properly. The function selector is in wrong position, turn it to AM or FM position. Relocate the unit. Turntable:
Not playing or sound distortion The Function selector is in wrong position, turn it to PHONO/AUX position. Loosen the screw, and take out the stylus guard. (The stylus guard is a white plastic cover that protects the stylus during transportation.) Select the correct playback speed. Bluetooth:
Bluetooth reception failure The external device is too far from the unit. Have not paired.(Pair the unit as the procedure stated in manual). Maintenance:
Always keep the turntable clean. If the surface of the unit gets dirty, wipe with a soft cloth or use a diluted mild liquid soap. Be sure to remove any excess liquid completely. Do not use thinner, benzine or alcohol as they may damage the surface of the unit. Allow the surface of the unit to dry completely before using. FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 13 Specifications General:
Power requirements..........................................................................................................................AC 120-240V~,50/60Hz Power Consumption......................................................................................................................................................13W Audio:
Impedance of speakers...................................................................................................................................2 X 3W; 4Ohm Radio:
Frequency range (FM)................................................................................................................................. 88MHz~108MHz Frequency range (AM)........................................................................................................................... 530 kHz to 1710 kHz Turntable:
Motor............................................................................................................................................................ Drive System......................................................................................................................................................... Speed........................................................................................................................................ Stylus....................................................................................................................................................................... DC servo motor Belt Drive 33-1/3 rpm, 45 rpm, 78 rpm CSC-015 Design and specifications are subject to change without notice. Accessories:
1 x User's manual 2 x Stylus (one for installation, one for spare) 1 x 45rpm Adaptor 1 x 3.5 mm stereo connection cable 14