JSB200 Wall Mountable 2.0-Channel Bluetooth Soundbar Speaker Users manual

 

BLUETOOTH SOUNDBAR SYSTEM MODEL: JSB-200 INSTRUCTION MANUAL Please read this instruction manual carefully and keep it for future reference. Insert the small plug from supplied AC/DC adaptor to DC IN jack on the rear of the unit and insert the AC/DC adaptor to the wall outlet having AC 100-240V~, 50/60 Hz. NOTE:This AC/DC adapter is intended to be correctly operated in a vented indoor wall outlet. AC/DC adapter To the DC IN jack on the rear of unit. 1. Placing the device on table Ventilation When placing the Sound Bar on an entertainment center, bookshelf, or any type of enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat generated from the Sound Bar could produce a potential heat hazard. 3 MOUNTING 1. Mounting the device on wooden wall We recommend having this speaker professionally mounted. By using the included wall mounting accessories, the sound bar can be mounted onto a wall. 25.9 inches Holes distance:25.9 inches in same horizontal level supplied Metallic Bracket supplied Screws supplied Metallic Bracket supplied Screws 1. Mark the position of the mounting screws on the wall using a pencil. 2. Drill the supplied screws directly into the marks that you have made on the wall with the Metallic Bracket as the figure above. 3. Put the sound bar onto the mounting brackets. Make sure they are firm and stable. 2. Mounting the device on wall l:

Holes distance:25.9 inches in same horizontal level

(1) supplied Plastic Inserts supplied Metallic Bracket supplied Screws

(2) Drill holes by powerful electrical drill. supplied Plastic Inserts supplied Metallic Bracket supplied Screws 1. Mark the position of the mounting screws on the wall using a pencil. 2. Drill holes by a powerful electric drill( Not supplied )( Drill head diameter:6.0 mm ). 3. Insert the supplied plastic inserts into the holes by hammer. 4. Secure the supplied screws into the plastic inserts with the Metallic Bracket. 5. Put the sound bar onto the mounting brackets. Make sure they are firm and stable. 4 2

. 2 M o u n t i n g o n t h e w o o d e n w a l PRODUCT OVERVIEW Front View Back View AUX-IN 1 jacks SUBWOOFER OUT jack DC IN jack Side View VOLUME +

POWER/SOURCE AUX-IN 2 Jack VOLUME -

5 REMOTE CONTROL 1. STANDBY 2. VOL- ( volume down ) 3. SOURCE 4. BASS-

5. TREBLE-

6. 7. ( play/pause ) 8. (mute) 9. VOL+ ( volume up ) 10. BASS +

11. PAIR 12. TREBLE +

13. EQ ( Equalizer ) 14. STANDBY PAIR 1 2 3 4 5 6 7 8 9 10 11 12 13 14 BATTERY INSTALLATION

- Before installation Remove and discard the insulation tab. Out of the box the Remote Control has a battery and will be usable after the tab is removed.

-Replace battery for the remote control 1. Push and slide out the battery holder as Figure 1 below. 2. Replace the battery with a new CR2025 button cell with the polarity (+) side upward. 3. Slide into the battery holder. BATTERY PRECAUSIONS Never recharge the batteries, apply heat to them or take them apart. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. Do not throw the batteries in fire!

Attention should be drawn to the environmental aspects of battery disposal. If the remote control is not going to be used for a long time, remove the battery to avoid damage caused by battery leakage corrosion. POWER CONTROL

- To turn the unit on Connect the supplied AC/DC adapter. Press STANDBY button to turn on the unit.

- To turn the unit off Press STANDBY button on the remote control or hold STANDBY button in the right side of the unit. NOTE:

If the unit is not used for a long period of time, disconnect the AC/DC adapter. 6 AUX-IN 1 CONNECTION

- RCA AUX IN sources may include TV/DVD/VCR

- RCA AUX IN connection 1. Connect the RCA audio cable (supplied) to the audio output jack on DVD player and AUX 1 or AUX 2 jack on the rear of DVD. 2. Press SOURCE button repeatedly until the indictaor turns green. White Red

-During playback Press MUTE button to turn off the sound. Press again to resume the sound. Press VOLUME+/- buttons to adjust the volume level. Press BASS+/- buttons to adjust bass level. Press TREBLE+/-buttons to adjust treble level. Press EQ button to switch between JAZZ/POP/CLAS/ROCK/NORM. 7 AUX-IN 2 CONNECTION

- AUX IN source may include:

Personal audio players Personal computers or laptops

- AUX IN connection:

1. Connect a stereo 3.5mm jack cable (supplied) between the headphone or LINE/Audio output of the personal audio player and the AUX-IN 2 jack on the right side of the unit. 2. Power on the unit and press SOURCE button repeatedly un til the indicator turns orange. Set your personal audio player/computer to play. NOTE: If there is no sound or if the volume is not loud enough, you may increase the setting on the source. Connect to the output socket of external audio devices (Mp3, Computer, ext.) To AUX IN Jack on the unit

-During playback Press MUTE button to turn off the sound. Press again to resume the sound. Press VOLUME+/- buttons to adjust the volume level. Press BASS+/- buttons to adjust bass level. Press TREBLE+/-buttons to adjust treble level. Press EQ button to switch between JAZZ/POP/CLAS/ROCK/NORM. SUBWOOFER CONNECTION Subwoofer connection source may include:

Amplifiers and other devices with audio input jack Connect the RCA cable with the subwoofer out jack, and another end of RCA cable to the audio in jack of amplifiers or other devices. 8 BLUETOOTH

-Pairing 1. Press SOURCE button repeatedly to enter BT mode. The indicator is blue. 2. Turn off the Bluetooth functionality of other devices that are paired with your unit. Only one device can be used with the Bluetooth function at a time. 3. Turn on Bluetooth functionality on your Bluetooth device. Typically, Bluetooth controls are found on the devices tools or settings menu (see your user manual). Turn on Bluetooth connectivity and make your device discoverable. 4. Choose add a new Bluetooth deviceor setup Bluetooth deviceon your device. It will start to search. Once shows on your device, select it. If your

"0000"

device prompts you for a pass code, please enter"0000". If the pairing attempt fails or times out, please start pairing procedure again. 5. After your device and the can be heard. NOTE:

The unit will automatically reconnect the last paired device when Bluetooth mode is reselected from other mode. If for some reason the Bluetooth connection is lost due to external factors or will not auto reconnect, you must clear the " " from your Blue Tooth device list and begin the paring process again. Press PAIR button on remote control to disconnect the current connection of the unit with the external device. have connected each other, a sound JSB-200 JSB-200 JSB-200 button to skip forward to the next track and button to suspend momentarily the playing track. Press again to

-During playback Make sure the Bluetooth connection between the unit and the device is activated. Press resume playing. Press skip backward to the previous track. Press MUTE button to turn off the sound. Press again to resume the sound. Press VOLUME +/- buttons to adjust the volume level. Press BASS +/- buttons to adjust bass level. Press TREBLE +/- buttons to adjust treble level. Press EQ button to switch between JAZZ/POP/CLAS/ROCK/NORM. button to 9 TROUBLESHOOTING GUIDE

No power AC plug not connected to the wall outlet Plug to the wall outlet. Volume in minimum position Raise volume level by pressing the VOL

(Volume) + button No sound The connected device is not in payback mode Play the music/movie in the connected device as usual and make sure the volume level of it is in high level Input source incorrect Press the SOURCE button repeatedly to set the input source to the desired mode Sound distortion Remote not working Bluetooth reception failure Bass level of the connected device too high Reduce the bass level of the connected device Volume level too high Reduce the volume level by pressing the VOL (Volume ) - button The battery is consumed Replace with new battery The external device is far from the unit Put the external BT device close to the unit Have not paired Pair both unit as BT pairing page 10 GENERAL SPECIFICATIONS Power source of the remote control..................DC 3V, 1x CR 2025 button cell Output of the power adapter.................................................. DC 16V,1.8 A Audio output.......................................................................................2x10 W Power consumption.............................................................................25 W Bluetooth working range.......................................................................10M Subwoofer frequency................................................................................80-150Hz Subwoofer level........................................................................................1V ( max ) ACCESSORIES 1 x Instruction manual 1 x Remote control 1 x CR 2025 button cell (Already installed in the remote control) 1 x Stereo audio connection cable with 3.5mm stereo plug 1 x RCA audio cable 1 x Adapter 4 x Screws ( For wall mounting ) 4 x Wall plugs ( For wall mounting ) 2 x Metal brackets ( For wall mounting ) 11 FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.