2016.07. 13 17:39:53
+08'00'
STEREO SUITCASE STEREO SUITCASE TURNTABLE SYSTEM TURNTABLE SYSTEM with Bluetooth with Bluetooth wireless technology wireless technology 2016.07.13 18:12:34 +08'00'
Owner's Manual PLEASE READ BEFORE OPERATING THIS EQUIPMENT. Model: CD698 Size: 148.5(W) x 210(H)mm (A5) IMPORTANT SAFETY INSTRUCTIONS
2016.07.13 18:12:42
+08'00'
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 2
2016.07.13 18:12:48 +08'00'
IMPORTANT SAFETY INSTRUCTIONS
3 IMPORTANT SAFETY INSTRUCTIONS
2016.07.13 18:12:54
+08'00'
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
4 Location of Controls Turntable and Function Panel 1 2 3 1. Turntable platter 2. Turntable center spindle 3. 45 RPM adapter 4. Lever 5. Tone arm holder 6. LINE IN jack 7. Speed selector 8. Function knob 9. Tone arm 10.Power ON-OFF/
Volume knob 11. Indicators 12. HEADPHONE jack 13. Stylus 4 5 6 7 8 9 10 11 12 13 2016.07. 13 18:13:02
+08'00'
INDICATOR
Front View and Rear View 14 15 16 16 DC IN DC 9V,1000mA
17 18 5 14. Metallic buckle 15. Handle 16. Speakers 17. DC IN jack 18. LINE OUT jacks Power Source 1. Connect the small plug from the supplied AC/DC Adaptor to the DC IN jack on the rear of unit. 2. Plug the AC/DC Adapter into a conveniently located AC outlet having AC 100-240V~, 50/60Hz. AC outlet AC/DC Adapter 2016.07.13 18:13:07 +08'00'
To the DC IN jack on the rear of the unit. Notes:
~ This AC/DC Adaptor is intended to be correctly orientated in a vertical or floor mount position.
~ For saving energy, if long period of time will not use the unit. Unplug the AC/DC Adaptor from wall outlet. Operation General Operation:
1. Open the top cover as the illustrated follows:
2 1 2. Connected the unit to AC power as instructed earlier. 3. Turn the Power ON/OFF--Volume knob clockwise to power on the unit and set the volume to the desired level. The indicator will illuminate. 4. Turn the Function selector to the desired position. 5. When finished listening, turn the Power ON/OFF--Volume knob counterclockwise until Click is heard to shut off the unit. The indicators will not light. 6. Close the cover then lock it. 6 Listening through Bluetooth
(BT) Bluetooth:
In first time use or re-pairing to a new BT Device, pairing it as below:
1. Power on the unit and turn the Function selector to BT position as the instructed earlier. The color of indicator will turn to Blue and blink. 2. Power on the external BT Device and enter to BT searching mode. Start pairing as the on screen instructions on the external BT Device. After paired, the Blue indicator will stop blinking, the tone sound of connected will hear.
(For details pairing procedures, please refer to the users manual of your BT device.). 3. Plays the music in the paired BT Device as usual. 2016.07.13 18:13:15 +08'00'
Notes:
When the external BT player searched the unit, our model number CD698 will appear on the display of external BT Device. Pairing code 0000 or 1234 may need to enter. Normal operation after paired:
1. Power on the unit and turn the Function selector to the BT position as the instructed earlier. The color of indicator will turn to Blue and blink. 2. Wait a few seconds until the unit auto paired to the external BT Device. (The Blue indicator will stop blinking, the tone sound of connected will be heard). 3. Plays the music in the paired BT Device as usual. 4. During playback, using the control buttons on the paired cell phone to skip the tracks; pause; play...etc. 7 Listening a Record 1. In first time use, take off the protective cover from the stylus as the illustrated below:
Plastic protective cover (White color) 2016.07.13 18:13:20 +08'00'
2. Place the Record on the center spindle. Note: If you are playing a 45 RPM Single (small size record), place the supplied 45 RPM adapter to the center spindle then place the record on it. 3. Slide the Speed selector to 33; 45 or 78 to match the play speed of the record. 4. Unlock the Tone Arm from the holder as the illustrated below:
clip 5. Power on the unit and turn the Function selector to the PHONO position as the instructed indicator will turn to Red. earlier. The color of 6. Raise the Lever to raising the Tone Arm then move it to the top of the desired location Lever to put the Tone Arm onto the record. Plays will auto start. of the record. Release the 7. When finished playback, the unit will auto stop turning (or you wants to stop immediately);
raise the Lever to rising the Tone Arm then put it back to the Holder. Release the Lever then lock the Tone Arm on the Holder. 8 Other Connections LINE IN:
Listen music from the external Audio Player as follows:
1. Connect one end of the supplied Audio Connection Cable to the Phones Jack; Line Out Jack or AUX Out Jack on the external Audio Player. LINE OUT:
To listening from external Audio Amplifier:
1. Connect one end of the RCA Audio Connection Cable
(not supplied) to the Line IN Jacks or AUX IN Jacks on the external Audio Amplifier. 2. Connect the other end to the LINE IN Jack on the top of unit as the illustrated below:
2. Connect the other end of the cable to the LINE OUT jacks on the rear of unit as the illustrated below:
2016.0 7.13 18:13:2 6
+08'00'
To LINE IN jack on the unit Mobile Phone Connect to the Phones; AUX Out;
Line Out Jack of the external devices
(Such like MP3 Player; cell phones;
iPod/iPad ... etc)
(Audio Connection Cable supplied) 3. Power on the unit and turn the Function selector to the LINE IN position as the instructed earlier. The color of indicator will turn to Purple. 4. Plays the music on the connected external Audio Player as usual. Note: Make sure the volume level of the external Audio Player was set to high. Otherwise, sound from this unit may weak. DC IN DC 9V,1000mA
White Red
(Connection Cable not included) To the Line In/AUX In To the Line In/AUX In jacks on the external jacks on the external Audio Amplifier Audio Amplifier 3. Power on the unit and plays music as usual as the instructed earlier. 4. Power on the external Audio Amplifier and set it to LINE IN mode to plays the music from this unit. HEADPHONE:
For private listening, connect the 3.5mm plug from the Earphone/Headphone (not supplied) into the HEADPHONE jack on the top of unit. Sound from speakers will be auto cut. 9 Records Handling Do not touch the record's grooves. Only handle records, by the edges or the label. Make sure your hands are clean. Skin oils from even clean hands can leave a residue on the record surface that will gradually deteriorate the quality of your record. label grooves 2016.07.13 18:13:31
+08'00'
edge Keep your hands away from dust. Keep them in a cool, dry place. To avoid dust and scratches, keep records in their sleeves and jackets when not in use. Store records upright on their edges. Records stored horizontally will eventually bend and ward. Do not expose records to direct sunlight or high humidity and temperature. Long exposure to high temperatures will will warp the record. Do not store your records in the trunk of your car. The temperature in a closed trunk can ruin your collection. Store records in an area with a stable temperature an dlow humidity. Should the record become dirty, gently wipe the surface in a circular motion, using a soft anti-static cloth. Replace the stylus If the stylus was abrased after long time use, replace it by the supplied extra style as follows:
1. Use a screwdriver (not supplied) to push the stylus off 2. Install the new stylus as illustrated below:
then pull it out as the illustrated below:
Guide Pins (inside) 10
2016.07.13 18:13:36
+08'00'
Troubleshooting Guide
11 General Specifications
2016.07.13 18:13:42 +08'00'
Accessories
SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE 12 LIMITED WARRANTY Craig warrants this product to be free from manufacturing defects in material and workmanship under normal use for a period of 90 days from date of purchase. If service is required, please return the product to the store where it was purchased for exchange;
or, pack the unit in the original packing material with all accessories if applicable, a copy of your sales receipt and a Cashiers check or Money Order for $12 (to cover shipping and handling costs) payable to Craig Electronics Inc. For consumers in Canada, please make sure that the cashier check or money order is redeemable through a U.S. bank. Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit can not be repaired or replaced, a refund will be forwarded to you within four weeks of receipt of your unit. Please ship your unit to:
Craig Electronics Inc. 1160 NW 163 Drive Miami, Fl 33169 2016.07
.13 18:13:4 8
+08'00'
This warranty is void if the product has been: a) Used in a commercial application or rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by anyone other than an authorized Craig service center. d) Damaged because it is improperly connected to any other equipment. Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owners Manual which can be performed by the customer. b) Damage to equipment not properly connected to the product. c) Any cost incurred in shipping the product for repair. d) Damage to the product not used in the USA. This warranty is not transferable and only applies to the original purchase. Any implied warranties, including the warranty of merchantability, are limited in duration to the period of this expressed warranty and no warranty whether expressed or implied shall apply to the product thereafter. Under no circumstance shall Craig be liable for any loss or consequential damage arising out of the use of this product. This warranty gives specific legal rights. However, you may have other rights which may vary from state to state. Some states do not allow limitations on implied warranties or exclusion of consequential damage. Therefore, these restrictions may not apply to you. To Obtain Service on your Product email:service@craigelectronics.com Printed in China CD698_WC_E0CL1_B0WU