BLUETOOTH VOICE ACTIVATED GOOGLE/SIRI SPEAKER MODEL: ISBV39 Please read this user manual carefully to ensure proper use of this product and keep this manual for future reference IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK) OF THE DEVICE. NO USER SERVICEABLE PARTS ARE INSIDE. PLEASE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE:The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. ATTENTION:The exclamation point within an equilateral triangle is intended to alert important operating and maintenance
(servicing) instructions in the literature accompanying the appliance. the user to the presence of WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. Cancer and Reproductive Harm-www.P65Warnings.ca.gov Warning:
- Batteries (a battery pack or installed batteries) shall not be subject to excessive heat, such as direct sunlight, fire, or the like.
* This product is built with an internal rechargeable battery.
- Changes or modifications not expressly approved by the manufacturer could void the users authority to operate this device.
- Usage of controls or adjustments of performance procedures,other than those specified herein, may result in hazardous exposure.
- Recharge the battery when the device indicates that the battery is low.
- It is highly recommended to charge the battery immediately when the battery is low.
- To prolong the life of the battery, it is NOT recommended to use the device when it is charging.
- To prolong the life of the battery, consider recharging its battery at least once per month. 2 FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation. FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio installed and used in accordance with the frequency energy and, instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
if not Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction lation instructions and FCC WARNING:
To assure continued operation, follow the attached instal use only shield cables when connecting to other devices. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Trademark & Regulatory Statements Bluetooth is a registered trademark of Bluetooth SIG, Inc. Other trade-marks and names are those of their respective owners. Google Play store and all Google Brand Features are trademarks or distinctive brand features of Google Inc., LLC. Apple App Store and Siri Assistant are registered trademarks of Apple Inc. 3 PRODUCT OVERVIEW TOP VIEW 1 2 3 5 6 7 4 REAR VIEW 8 9 10 1. Play/Pause, Hands-Free Button 2. Charging Indicator 3. Volume Down Button 4. Volume Up Button 5. Built-in Microphone 6. Pairing Indicator 7. Power On/Off, Mode Switch Button 8. AUX-IN Jack 9. Micro-USB Charging Port 10. Rubber Cover 4 RECHARGING THE UNIT The unit has a built-in rechargeable battery, charge it before operation or when it is drained as below:
1. Uncover the rubber cover of the unit. 2. Insert the Micro USB connector of the included charge cable into the DC 5V input, which serves as the speakers Micro USB port. 3. Plug the other end of the USB cable into a computer or other compatible device, as shown below. 4. While charging, the charging indicator light on the unit will turn red, it will turn off when completely charged. NOTES:
A. Before first time use, charge approximately 4 hours until the unit is completely charged. B. Recharge and store the unit within the temperature range of 5C~35C
(40F~95F). C. Do not charge longer than 24 hours. Excessive charging or running the unit until the battery fully drains will damage battery. Battery life will be extended if you keep the battery fully charged. D. Battery life naturally shortens slowly over time. E. The rechargeable battery built into this product is not user replaceable. 5 BLUETOOTH OPERATION 1. Press and hold the SOURCE button to turn the device on. After powering on, the mode indicator will begin to blink, alternating between blue and green. 2. Activate the Bluetooth menu on the device you wish to connect to the unit. Begin a device search for the speaker. The pairing name " ISBV 39 the pairing list. Select it to establish a connection.
" will appear on 3. After a successful connection made, the mode indicator will be solid blue. 4. Play a track on your paired device as you would normally. While playing:
Press the Button to pause, and press it again to resume playing. Press and hold the Button to reactivating bluetooth pairing mode. Press the - or + button to adjust the volume level. Hands-Free Function:
During an incoming call, press the button once to answer the call. Press it again to end the call. During an incoming call, press and hold the button to reject the call. Double press the " " button to redial the last dialed number. NOTE: In Bluetooth mode, it there is no connection for about 10 minutes, the unit will enter standby mode. 6 INSTALLING GOOGLE ASSISTANT 1. Access the Google Play Store or Apple App Store from your smartphone device. 2. Install the Google Home app onto your smartphone device. 3. Establish a wireless connection from the wireless router to your smartphone. If Wi-Fi is not available, you can use data. 4 . Activate the Bluetooth functionality on your smartphone device.
* The Google Home app uses Bluetooth to identify the speaker. 5 . Open the Google Home app and follow the on-screen instructions to set the initial settings for the speaker. USING GOOGLE ASSISTANT Once the speaker is set up as a Google Home device, you can control the operation of the speaker with Google Assistant using just your voice. 1. Begin any Google Assistant voice command by addressing the speaker with Hey Google or Ok Google. 2. Instruct the speaker to perform an activity using one of the Google Asssitant voice commands, and the speaker will initiate immediately. 7 SETTING UP SIRI ASSISTANT 1. To set up Siri Assistant on your speaker, you need an iPhone, iPod touch, or iPad with iOS 12 or later. 2. To begin, ensure that your iOS device has Bluetooth mode turned. 3. Plug in and turn on the speaker. Then hold your unlocked iOS device within a few centimeters of the speaker, until the setup screen appears. Tap Set Up and follow the on-screen instructions. Note: If the setup screen does not appear automatically, open the Home app on iOS device, tap the , then tap Add Accessory. Tap Dont Have a Code or Cant Scan?, then select the speaker in the Nearby Accessories list. If you do not have Home app already installed, you can download it from the App Store. 4. Listen for Hey Siri in the Siri & Search settings menu of your iOS device. USING SIRI ASSISTANT Once Siri Assistant has been set up on your speaker, you can fully control the unit using voice commands, allowing you to open and utilize any function on your phone. 1. When addressing the speaker, be sure to speaker clearly in your requests into the microphone of the speaker, say Hey Siri to activate Siri for your iOS device. 2. Siri Assistant can be used for GPS purposes, to ask about the weather, the latest traffic updates, check your flight times, play all of your favorite music and playlists, browse through your photos, check your emails, and much more. 8 AUX IN 1. Uncover the rubber cover at the rear of the unit. 2. Insert one end of the auxiliary cable into the external devices Aux-output jack. 3. Insert the other end of the auxiliary cable into the speakers Aux-input jack. AUX IN MP3 Mobile Phone Connect to the audio device s
(
MP3 iPod/iPad, etc.) hone layer, mobile phone, or 4. Press and hold the S O UR button to turn the device on. 5. Press the S O UR will be solid Green. button to switch to AUX IN mode. The mode indicator 6. Play music on the external device as you would normally. 9 C E C E TROUBLESHOOTING GUIDE Check the following before requesting service:
SYMPTOM Wont turn on No sound or weak sound Built-in battery is dead Volume level of paired/connected device is set to a low level POSSIBLE CAUSE POSSIBLE SOLUTION Recharge the battery Raise the volume level of the paired/connected device Sound distortion BT not unctioning f Volume level of the connected/paired device is set too high Reduce the volume level of the connected/paired device The external BT device did NOT pair to the speaker successfully Pair the external BT device to the speaker The external BT device is too far away from the speaker Place the external BT device closer to the speaker SPECIFICATIONS Power source: Built-in DC 3.7V, 1800mAh rechargeable battery Recharge by DC 5V through Micro USB port Bluetooth Version: V5.0 Bluetooth working range: up to 32 feet in open area Audio Output Power: 5 W (RMS) ACCESSORIES:
1 x User Manual 1 x USB Charging Cable SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE 10