all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 1.83 MiB | ||||
1 2 |
|
Internal photos | Internal Photos | 524.10 KiB | ||||
1 2 |
|
External photos | External Photos | 442.42 KiB | ||||
1 2 |
|
Label and location | ID Label/Location Info | 372.49 KiB | ||||
1 2 |
|
Authorization Letter | Cover Letter(s) | 20.51 KiB | ||||
1 2 |
|
Family Model Letter | Cover Letter(s) | 32.13 KiB | ||||
1 2 |
|
LTC Letter | Cover Letter(s) | 22.80 KiB | ||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | |||||||
1 2 |
|
SDoC Declaration Letter | Attestation Statements | 11.87 KiB | ||||
1 2 | RF Exposure Info |
1 2 | User Manual | Users Manual | 1.83 MiB |
37 inch Bluetooth Soundbar with Wireless Subwoofer MODEL: MSB3787W Please read this instruction manual carefully and keep it for future reference CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PART INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE:The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. ATTENTION:The exclamation point within an equilateral triangle is intended to alert important operating and maintenance
(servicing) instructions in the literature accompanying the appliance. the user to the presence of WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. WARNING: USE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORD This unit has a long cord that can be easily tripped on or pulled on, causing injury. Please make sure it is arranged so that it will not drape over a tabletop, etc. Where it can be pulled on by children or tripped over accidentally. CALIFORNIA PROP 65 WARNING:WARNING This product contains chemicals known to the State of California to cause birth defects or other reproductive harm. For more information on these regulations and a list of chemicals, log on the following website: http://www.oehha.ca.gov/prop65.html This product meets and complies with all Federal regulations. FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. 2 FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio installed and used in accordance with the frequency energy and, instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
if not Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC WARNING:
To assure continued operation, follow the attached installation instructions and use only shield cables when connecting to other devices. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Before using the unit, be sure to read all operating instruction carefully, please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1. Read these instructions All the safety and operating instructions should be read before the appliance is operated. 2. Keep these instructions The safety and operating instructions should be kept for future reference. 3. Heed all warnings All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions All operation and use instructions should be followed. 5. Do not use this apparatus near water The appliance should not be used near water; for example, near a bath tub, 3 washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. 6. Clean only with dry cloth The appliance should be cleaned only as recommended by the manufacturer. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation, such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments / accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. An appliance and cart combination should be moved with care. Quick stop, excessive fore and uneven surfaces may cause the appliance and cart combination to overturn. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or 4 moisture, does not operate normally, or has been dropped. 15. Power source This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other source, refer to the operation instructions. 16. Power lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 17. Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 18. Object and liquid entry Never push objects of any kind into the product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product. 19. Outdoor antenna grounding If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electric Code ANSI/ NFPA 70 provides information with respect the mast and supporting structure, grounding of the lead- in wire to an antenna discharge product, size of grounding conductors, location of antenna- discharge product, connection to grounding electrodes and requirements for the grounding electrodes. to proper grounding of 5 20. Service Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 21. Replacement parts When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts. Unauthorized substitutions may result in fire or electric shock or other hazards. 22. Safety check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 23. Wall or ceiling mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 24. Damage requiring service Unplug this product from the wall outlet and refer service to qualified service personnel under the following conditions. a)When the power- supply cord or plug is damaged. b)If liquid has been spilled or objects have fallen into the product. c)If the product has been exposed to rain or water. the product does not operate normally by following the operating d)If instructions. Adjust only those controls that are covered by the operating instructions, as an adjustment of other controls may result in damage and will require extensive work by a qualified technician to restore the product to its normal operation. e)If the product has been dropped or the cabinet has been damaged. f)When the product exhibits a distinct change in performance- this indicates a need for service. 25. Note to CATV system installer This reminder is provided to call the CATV system installer' s attention to Article 820- 40 of the NEC that provides guidelines for proper grounding and, the cable ground shall be connected to the in particular, specifies that grounding system of the building, as close to the point of cable entry as practical. NOTE: Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way such as the following: the power-supply cord or plug has been damaged, liquid has been spilled into unit, the unit has been exposed to rain or moisture, the unit has been dropped or the unit does not operate normally. 6 PROdUCT OvERvIEW FRONT VIEW 1 2 BOTTOM VIEW 3 3 3 CONTROL PANEL 5 4 POWER SOURCE 6 7 SB PAIR 9 SUBWOOFER 8 15 16 REAR PANEL LINE IN USB L R AUX IN OPT IN DC 24V 10 11 12 13 14 INDICATOR POWER INDICATOR STANDBY DC 24V 17 18 19 20 1. Source Indicator 2. Remote Sensor 3. LED Light Effect 4. Power/Source Button 5. Volume Down Button 6. Volume Up Button 7. Previous Button 8. Next Button 9. SB Pair Button 10. LINE IN Jacks 11. AUX IN Jack 12. OPTICAL IN Jack 13. USB Port 14. DC IN Jack 7 15. LED Light Effect 16. Speaker 17. Indicator 18. Power Indicator 19. Standby Button 20. DC IN Jack REMOTE CONTROL 1 2 3 4 AUX OPTICAL LINE IN USB 5 MUSIC TALK MOVIE Sound Mode STANDARD VOL 6 7 8 9 10 11 12 13 14 1.
(Power On/Off) Button 2. AUX Button 3. LINE IN Button 4.
(Previous) Button 5. Sound Mode (MUSIC, TALK, MOVIE, STANDARD) 6. 7. 8.
(Mute) Button
(Light Effect) Button
(Bluetooth)Button 9. OPTICAL Button 10. 11. USB Button
(Mode Switch) Button 12. 13. 14.
(Next) Button Play/Pause Button
(Volume Up/Down) Button BATTERY INSTALLATION OF REMOTE CONTROL First time use Remove and discard the insulation film as Fig.1. Replacing battery for Remote Control 1. Pull out the battery holder as Fig.2. 2. Replace the old button cell with a new CR2025 button cell with the polarity markings facing upward as Fig.3. 3. Push back the battery holder as Fig.4. Fig.1 OPEN 3V CR2025 Fig.2 Fig.3 8 3 V C R 2 0 2 5 O P E N Fig.4 BATTERY PRECAUTIONS Follow these precautions when using a battery in this device:
1. Use only the size and type of battery specified. 2. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment, a reserved battery may cause damage to the device. 3. Do not mix different types of batteries together ( e.g: Alkaline and Carbon -zinc ) or old batteries with fresh ones. 4. If the batteries in the device are consumed or the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible leakage. 5. Do not try to recharge the battery as it is not intended to be recharged; it can overheat and rupture.
( Follow the battery manufacturers instructions.) 6. The batteries shall not be exposed to excessive heat such as sunshine or fire. 7. Clean the battery contacts and also those of the device prior to battery installation. 8. The remote control is supplied with a coin/button cell battery. If the coin button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used battery away from children. If the Battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed any part of the body, seek immediate medical attention. CR2025 CAUTION Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. Remote control operation range When there is an obstacle between the transmitter and the unit, the unit may not operate. When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the REMOTE SENSOR of the unit, the operation of the remote may be unstable. 16.4 Feet (5M) AUX OPTICAL LINE IN USB MUSIC TALK MOVIE Sound Mode STANDARD VOL 9 PLACEMENT AND MOUNTING 1. Placing the device on a table - Ventilation When placing the unit and the subwoofer on an entertainment center, bookshelf, or any type of enclosed space, be sure to allow enough space for ventilation. Otherwise, the heat generated will produce potential heat hazard. 2-3inches 2-3inches POWER SOURCE SB PAIR 2-3inches 2-3inches 2. The Installation Distance 873mm(34.4inches) 10 2.1 Mounting to a wooden wall 34.4 inches
(screws not included) A. Mark the position of the mounting screws on the wall using a pencil. B. Drill the screws directly into the marks that you have made on the wall and leave approx. 0.3 inches length to hook the sound bar. C. Put the sound bar onto the mounting screws. Make sure they are firm and stable. 2.2 Mounting to a brick wall 34.4 inches
(screws and plastic fixing plug are not included) A. Mark the position of the mounting screws on the wall using a pencil. B. Drill 2 holes on wall with a powerful electric drill. C. Insert the fixing plug and hammer into the holes. D. Secure the screws into the fixing plug and leave approx. 0.3 inches length to hook the sound bar. E. Put the sound bar onto the mounting screws. Make sure they are firm and stable. 11 GENERAL OPERATION 1.Connect the DC 24V,2A Adapter to the DC IN jack on the Unit. Plug the Adapter into the AC outlet with AC110~240V;50/60Hz. The mode indicator on the Unit will light up and turn RED. 2. Connect the DC 24V, 2A Adapter to the DC IN jack on the subwoofer. Plug the Adapter into the AC outlet with AC110~240V;50/60Hz. The power indicator on the subwoofer will light up and turn RED. 3. Press and hold the Power/Soure button on the unit or press the button on remote control to power on the unit. The LED light effect will light up. Press the STANDBY button on the subwoofer to power on. 4. After a few seconds, the unit will be connected with subwoofer automatically, the indicator on subwoofer will be solid blue. IMPORTANT NOTE: If the pairing INDICATOR on the SUBWOOFER is off, it means the Main Unit is not connected with the SUBWOOFER successfully. Please operate as the steps below:
A: Press and hold the SB Pair button on the Main Unit for 3-5 seconds. B: Press and hold the STANDBY button on SUBWOOFER to power off, then press the STANDBY button on SUBWOOFER INDICATOR on SUBWOOFER will blink several times and then turn off, it means the SUBWOOFER is connected with Main Unit successfully. to power on again, the pairing on ec C: Press the SB PAIR button on the Main Unit again, the pairing INDICATOR on the SUBWOOFER will be solid BLUE. 5. Press the button on remote control or press the Power/Source button on the unit repeatedly to switch to the desired mode. Or press the AUX, OPTICAL, USB button on remote control to turn to desired mode, the indicator
, LINE IN, on front of the unit will turn to:
Blue.............................................................................................Bluetooth Mode Green.............................................................................................LINE IN Mode Violet (red+blue)............................................................................AUX IN Mode Orange (red+green)................................................................OPTICAL IN Mode Indigo (blue+green).............................................................................USB Mode 12 GENERAL OPERATION 6. During Playback:
~ Press the + or - button on the unit or remote control repeatedly to adjust volume.
~ Press the button on remote control to turn off sound, the mode indicator on the unit w ill blink, press the button again to resume.
~ Press the MUSIC button on remote control to turn to MUSIC sound effect mode.
~ Press the TALK button on remote control to turn to TALK sound effect mode.
~ Press the MOVIE button on remote control to turn to MOVIE sound effect mode.
~ Press the STANDARD button on remote control to turn to normal sound effect mode.
~ Press the button on remote control repeatedly to change to different LED light effects. Mode 1: The RGB LED light with combined color will flash repeatedly and alternatively. Mode 2: The LED light will be solid Red. Mode 3: The LED light will be solid Blue. Mode 4: The LED light will be solid Green. Mode 5: The LED light will be Yellow. Mode 6: The LED light will be Violet. Mode 7: The LED light will be Light Blue. Mode 8: The LED light will be White.
~ Press and hold the button on remote control to turn on or turn off the LED light effect. 7. Press and hold the Power/Source button on the unit or press the button on remote control to power off the unit. Press and hold the STANDBY button on the subwoofer to power off subwoofer. 13 BLUETOOTH OPERATION 1. Power on the unit and subwoofer and pair as previously explained. 2. Press the Power/Source button on the unit or the button on the remote control repeatedly, or press the button on remote control to switch to the Bluetooth mode, the indicator on front of the unit will turn Blue and blink. 3. Power on the external Bluetooth enable device and enter Bluetooth mode and try searching the unit. 4. When MONSTER SB1 appears, select it and make connection. 5. After successful paired, the indicator will stop blinking. 6. During playback:
~ Press the or button on remote control to skip tracks.
~ Press the button on remote control to pause, press it again to resume. 7. Press and hold the button to disconnect current connection and go into a pairing mode, you can pair to new devices with this sound bar. NOTE: The unit will be automatically connected with the last connected Bluetooth device if their Bluetooth function are activated and they are in working range. 14 AUX IN OPERATION An external Audio player(such as mobile phone, MP3 player etc.) can be connected to this unit and listen through the unit's speakers. 1. Plug one end of the AUX IN Cable into the AUX IN jack on the unit. 2. Plug another end of the AUX IN Cable into the headphone jack or Aux Out jack on the external audio player. LINE IN USB L R AUX IN OPT IN DC 24V Rear View Mobile Phone MP3 Player Connect to the Phones; AUX Out;
Line Out Jack of the external devices
(Such like MP3 Player; cell phones;
iPod/iPad ... etc) 3. Power on the unit and subwoofer and pair as previously explained. 4. Press the Power/Source button on the unit or the button on the remote control repeatedly, or press the AUX button on remote control to switch to the AUX IN mode, the indicator on front of the unit will turn Violet(red+blue). 5. Power on the connected external player and start playback the music as usual. 6. During playback:
~ Press the button on remote control to pause, press it again to resume. 15 LINE IN OPERATION An external Audio/Video player(such as TV, DVD player etc.) can be connected to this unit and listen through the unit's speakers. 1. Plug one end of the line in cable into the LINE IN jacks(L&R) on the unit. 2. Plug the other end of the line in cable into the Line Out jacks(L&R) on TV or DVD player etc. white red L R LINE IN USB AUX IN OPT IN DC 24V Rear View Line out jacks of TV/DVD player etc. L R Video 3. Power on the unit and subwoofer and pair as previously explained. 4. Press the Power/Source button on the unit or the button on the remote control repeatedly, or press the LINE IN button on remote control to switch to LINE IN mode, the indicator on front of the unit will turn Green. 5. Power on the connected external player and start playback the music as usual. 16 OPTICAL-IN OPERATION 1. Connect the Optical out jack from the external audio player (such as TV, DVD player etc.) to the OPTICAL IN jack on the rear of the unit with the optical connection cable as illustated below:(For PCM format only) LINE IN USB L R AUX IN OPT IN DC 24V Rear View Optical Connection Cable TV or DVD player etc. OPTICAL OUT 2. Power on the unit and subwoofer and pair as previously explained. 3. Press the Power/Source button on the unit or the button on remote control repeatedly, or press the OPTICAL button on remote control to switch to the OPTICAL IN mode, the indicator on front of the unit will turn Orange(red+green). 4. Power on the connected external player and start playback the music as usual. Turn on the digital audio output and set it to PCM (Pulse Code Modulation) type similar to the below figure:
Picture AudioAudio Time Setup Lock Off Sound Mode Bass Treble Balance Surround AVL Digital Output Digital Output Audio Language Standard Off Off PCM PCM English Select Move MENU Exit 17 USB PLAYBACk 1. Plug the USB player to the USB port at the rear panel of the unit. LINE IN USB L R AUX IN OPT IN DC 24V Rear View USB 2. Power on the unit and subwoofer and pair as previously explained. 3. Press the Power/Source button on the unit or the button on the remote control repeatedly, or press the USB button on remote control to switch to the USB mode, the indicator on front of the unit will turn Indigo(blue+green). 4. During playback:
~ Press the or button on remote control to skip tracks.
~ Press the button on remote control to pause, press it again to resume. 18 TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION No power The adapter is not connected Connect the adapter to the unit and wall outlet The unit is in power off mode No sound or sound weak Volume level in minimum position The paired/connected device is not in playback mode Press and hold the power/source button on the unit or press the button on remote control to power on the unit Raise the volume level by pressing the + Button on the unit Or press VOL+ button on remote control in the Play music/movie paired/
connected device as usual and make sure the volume level of it is in high level. Input source incorrect Press the power/source button repeatedly or press the button on remote control to switch to desired mode Sound distortion/rattle Volume level too high Remote Control not functioning Out of range The battery in the remote control is drained Reduce the volume level by pressing the - Button on the top of the unit Or press VOL- button on remote control Reduce the volume level of paired/connected device. the Point the remote control to the remote sensor on the unit within 16 feet, +/-30 degress Replace with new battery Bluetooth reception failure The external device is too far from the unit Put the external BT device close to the unit. Have not paired Pair the unit with the BT Device as the procedures stated in this manual. 19 SPECIFICATIONS Power input ...........................................................................AC 100~240V, 50/60Hz Power output .........................................................................DC 24V 2A Audio output of the unit...............................................................................4 x 12.5W Audio output of the subwoofer.............................................................................50W Bluetooth effective working range in open area......................................up to 32 feet Remote effective working range..............................................................up to 16 feet PACKAGES 1x The Unit 1x Subwoofer 1x User Manual 1x Remote Control 1x AUX IN Cable (1m) 1x LINE IN Cable (1.5m) 1x Power Adapter for the Unit (24V, 2A) 1x Power Adapter for the Subwoofer (24V,2A) SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE is a trademark on a registered trademark of Bluetooth SIG Inc. All other trademarks and trade names are those of their respective owners. Monster, the Monster logo and the M design are registered trademarks of Monster, Inc. and its subsidiaries in the U.S. and other countries and are used under license. For service assistance and product information, please call: 1-800-968-9853. Curtis International Ltd. 7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3 www.curtisint.com 20 To make a warranty claim, do not return this product to the store. Please email support@curtiscs.com or call 1-800-968-9853. 90 day Warranty This product is warranted to be free from defects in material and workmanship for a period of ninety (90) days from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us. If the product or component is no longer available, we will replace with a similar one of equal or greater value. Prior to a replacement being sent, the product must be rendered inoperable or returned to us. This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions., or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as on the specified rating on the label (e.g., 120V~60Hz). We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you. For faster service, locate the model, type, and serial numbers on your appliance. Barre de son Bluetooth 37 pouces avec caisson de basses sans fil MODLE : MSB3787W Veuillez lire ce mode d'emploi avec attention et conservez-le pour rfrence future. INSTRUCTIONS DE SCURIT IMPORTANTES ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR ATTENTION : AFIN DE RDUIRE TOUT RISQUE DE CHOC LECTRIQUE, NE PAS RETIRER LE BOITIER (NI LA PARTIE ARRIRE). L'APPAREIL NE COMPORTE AUCUNE PICE REMPLAABLE PAR L'UTILISATEUR, CONTACTEZ LE PERSONNEL QUALIFI POUR RECEVOIR DE L'ASSISTANCE. VOLTAGE DANGEREUX : Le symbole d'clair avec une flche, l'intrieur d'un triangle quilatral, indique l'utilisateur la prsence de voltage dangereux non isol l'intrieur de l'appareil, qui pourrait tre suffisant pour constituer un risque de choc lectrique. ATTENTION : Le point d'exclamation dans un triangle quilatral attire votre attention sur des points importants de ce manuel concernant l'utilisation ou l'entretien de l'appareil. AVERTISSEMENT: POUR RDUIRE LES RISQUES D'INCENDIE OU DE CHOCS LECTRIQUES, N'EXPOSEZ PAS L'APPAREIL LA PLUIE NI L'HUMIDIT. AVERTISSEMENT: CET APPAREIL DOIT TRE UTILIS SOUS LA SUPERVISION D'UN ADULTE CAR IL EST MUNI D'UN LONG CORDON D'ALIMENTATION qui peut tre facilement tre tir et faire trbucher, causant des blessures. Assurez-vous que le cordon ne pend pas en bordure d'une table, etc. o il pourrait tre tir par des enfants ou sur lequel on pourrait trbucher accidentellement. AVERTISSEMENT CALIFORNIA PROP 65: AVERTISSEMENT Ce produit contient des produits chimiques reconnus de l'tat de Californie pour provoquer des malformations congnitales ou d'autres problmes de reproduction. Pour plus d'informations sur ces rglementations et une liste de produits chimiques en question, connectez-vous au site Web suivant : http://www.oehha.ca.gov/prop65.html Ce produit est conforme toutes les rglementations fdrales. DCLARATION DE LA FCC:
Ce dispositif est conforme l'article 15 des rgles de la FCC. Son utilisation est sujette aux deux conditions suivantes :
(1) Cet quipement ne doit pas crer d'interfrences dangereuses.
(2) Cet quipement doit accepter toute interfrence reue, incluant celles pouvant entraner un mauvais fonctionnement. L'antenne(les antennes) utilises pour ce transmetteur doit(doivent) tre installe(s) pour tre une distance d'au moins 20 cm pour toutes les personnes et ne doit pas tre co-installe ou fonctionner en conjonction avec une une autre antenne ou transmetteur. 2 AVIS DE LA FCC :
Cet quipement t test et est conforme aux limites d'un appareil de Classe B, selon l'article 15 des Rgles FCC. Ces limites ont ts mises en place pour offrir une protection raisonnable contre les interfrences dans un complexe rsidentiel. Cet quipement gnre, utilise et contient de l'nergie de frquence radio, si inutilis incorrectement pourrait crer des interfrences dangereuses pour les communications radio. Mais il n'existe aucune garantie que des interfrences ne seront pas produites dans une installation particulire. Si cet quipement cre des interfrences pour la rception radio ou tlvisuelle, ce qui peut tre constat en l'allumant et en l'teignant, alors il vous est conseill d'y remdier d'une des manires suivantes :
Rorientez ou dplacez l'antenne rceptrice. Augmentez la distance entre l'quipement et le rcepteur. Connectez l'quipement une prise ou circuit diffrent de celui du rcepteur. Consultez le distributeur ou un technicien radio ou TV d'exprience pour de l'assistance. AVERTISSEMENT DE LA FCC Pour s'assurer d'une conformit continue, suivez les instructions ci-inclus et utilisez uniquement des cbles blinds lors de branchement d'autres appareils. Tout changement ou modification effectue sans l'approbation de l'organisation responsable de la garantie qualit de l'quipement pourrait rvoquer vos droits d'utilisation de cet quipement. INSTRUCTIONS DE SCURIT IMPORTANTES Avant d'utiliser cet appareil, assurez-vous de lire toutes les instructions d'utilisation avec attention, et notez que ces conseils sont d'ordre gnral, qui peuvent donc ne pas tre appliqus l'unit que vous possdez. Par exemple, cet appareil pourrait ne pas avoir la capacit d'tre branch une antenne extrieure. 1. Lire ces instructions Toutes les instructions concernant la scurit et le mode d'emploi doivent tre lues avant de faire fonctionner ce produit. 2. Conserver ces instructions Les instructions concernant la scurit et le mode d'emploi doivent tre conservs pour rfrence future. 3. Respecter tous les avertissements. Tous les avertissements sur le produit et dans le mode d'emploi doivent tre respects. 4. Suivre toutes les instructions Toutes les instructions d'utilisation doivent tre suivies. 5. Ne pas utiliser cet appareil prs de l'eau Ne pas utiliser l'appareil proximit de l'eau - par exemple proximit d'un bain, d'un vier, d'une machine laver, dans un sous-sol humide, prs d'une piscine, etc. 6. Nettoyer seulement avec un chiffon sec L'appareil ne doit tre nettoy que de la manire dcrite dans ce mode d'emploi par le fabricant. 7. Ne pas bloquer les ouvertures d'aration. Installer selon les instructions du fabricant. Les fentes et ouvertures dans le cabinet et en arrire ou dans le fond sont pour la ventilation, afin de s'assurer du fonctionnement continu de l'appareil et pour le protger de surchauffe. Ces 3 ouvertures ne doivent pas tre bloques ou couvertes. Les ouvertures ne doivent jamais tre bloques en plaant le produit sur un lit, un canap, un tapis ou toute autre surface similaire. Ce produit ne doit jamais tre plac prs ou sur un radiateur ou une source de chaleur. Ce produit ne devrait pas tre plac dans une installation assemble comme une bibliothque ou une tagre moins qu'une ventilation adquate ne soit prsente ou que les instructions du fabricant soient respectes. 8. Ne pas installer prs d'une source de chaleur telle que radiateur, cuisinire ou autre appareil (y compris un amplificateur) qui produit de la chaleur. 9. N'essayez pas de contourner les caractristiques de scurit d'une prise polarise ou d'une mise la terre. Une fiche polarise possde deux lames dont l'une est plus large que l'autre. Une prise avec mise la terre possde deux lames et une troisime pince de mise la terre. La large lame ou troisime broche est prsente pour votre scurit. Si la prise fournie ne peut tre insre dans votre prise murale, contactez un lectricien pour faire remplacer la prise obsolte. 10. Ne placez pas le cordon d'alimentation l o il risque d'tre cras ou pli, principalement prs des prises, prises murales ou au point de sortie de l'quipement. 11. N'utilisez que des accessoires ou des attachement certifis par le fabriquant. 12. Utilisez uniquement le chariot, le trpied, le support ou la table spcifis par le fabricant, ou vendu avec l'appareil. Lorsqu'un chariot est utilis, faire attention lors du dplacement de la combinaison chariot/appareil afin d'viter toute blessure lors d'un basculement. Une combinaison de chariot et d'appareil devrait tre dplac avec soin. Un arr t n brusque, force excessive et surfaces irrgulires peuvent faire basculer la combinaiso de chariot et d'appareil. 13. Dbranchez l'quipement durant les orages ou lors des priodes d'inutilisation prolonges. Pour protger votre produit des orages, ou lorsqu'il n'est pas utilis pendant une longue priode de temps, le dbrancher de la prise murale et dbrancher l'antenne ou systme de cble. Cela prviendra tout dommage au produit caus par les clairs et les surtensions. 14. Faites appel au personnel qualifi pour tout besoin de rparation. Une rparation est ncessaire lorsque l'appareil a t endommag de quelque faon, tel que cordon d'alimentation ou fiche endommag, liquide renvers ou objets tombs dans l'appareil, appareil expos la pluie ou l'humidit, appareil ne fonctionne pas normalement, ou s'il a t chapp. 15. Alimentation Ce produit devrait tre aliment seulement partir de la source d'alimentation spcifie sur l'tiquette. Si vous n'tes pas certain de la source d'alimentation, veuillez contacter le vendeur ou la compagnie d'lectricit locale. Pour les produits conus pour fonctionner avec des piles ou d'autres sources, se rfrer au mode d'emploi. 16. Lignes lectriques Une antenne extrieure ne doit pas tre situe proximit de lignes lectriques ariennes ou autres circuits lectriques ou d'alimentation, ou si elle peut tomber sur ces lignes ou circuits lectriques. Lors de l'installation de systme d'antenne extrieure, viter de toucher ces lignes ou circuits car leur contact peut tre fatal. 4 17. Surcharge Ne pas surcharger les prises murales et les rallonges, car cela pourrait entraner un risque d'incendie ou de choc lectrique. 18. Insertion d'objet ou de liquide Ne jamais insrer d'objet dans le produit travers les ouvertures car il pourrait toucher des points de tensions dangereux ou faire court-circuiter des pices, ce qui pourrait causer des feux ou chocs lectriques. Ne jamais verser ou pulvriser tout type de liquide sur le produit. 19. Mise la terre d'antenne extrieure Si une antenne extrieure est branche au produit, veuillez vous assurer que le systme d'antenne est mis la terre afin de fournir une protection contre les surtensions et les charges statiques. L'article 810 du code lectrique national, ANSI / NFPA 70, fournit des informations relatives la mise la terre adquate du mt et sa structure, la mise la terre du fil conducteur un produit de dcharge d'antenne, la taille des conducteurs de mise la terre, l'emplacement des produits de dcharge d'antenne , la connexion aux lectrodes de mise la terre et les exigences pour les lectrodes de mise la terre. EXEMPLE DE MISE LA TERRE D'UNE PINCES DE MISE LA TERRE QUIPEMENT LECTRIQUE CBLE D'ENTRE DE L'ANTENNE ANTENNE UNIT DE DCHARGE DE L'ANTENNE CONDUCTEURS DE MASSE
(NEC SECTION 810-21) PINCES DE MISE LA TERRE SYSTME D'LECTRODE DE MISE LA TERRE DE LA SOURCE LECTRIQUE 20. Entretien Ne pas essayer d'effectuer vous-mme l'entretien de ce produit alors que l'ouverture ou le retrait des couvercles pourrait vous exposer des tensions dangereuses et autres risques. Faites appel au personnel qualifi pour tout besoin de rparation. 21. Pices de remplacement Lorsque des pices de remplacement sont requises, s'assurer que le technicien utilise des pices de remplacement spcifies par le fabricant ou que celles-ci possdent les mmes caractristiques que la pice originale. Les substitutions non autorises pourraient causer des feux ou chocs lectriques. 22. Vrification de scurit Lorsque les rparations sont termines, veuillez demander au technicien d'effectuer des contrles de scurit pour dterminer que le produit est en bon tat de fonctionnement. 5 23. Montage au mur ou au plafond Ce produit devrait tre mont au mur ou au plafond seulement si recommand par le fabricant. 24. Dommage ncessitant une rparation Dbrancher le produit de la prise murale et confier la rparation un technicien qualifi si une des conditions suivantes est rencontre. a) Lorsque le cordon d'alimentation ou la fiche est endommage. b) Si du liquide a t renvers ou des objets sont tombs sur le produit. c) Si le produit a t expos la pluie ou de l'eau. d) Si le mode d'emploi. Ajuster seulement les contrles viss par le mode d'emploi, comme l'ajustement des autres contrles pourrait causer des dommages et occasionnerait un effort supplmentaire de la part du technicien pour restaurer le produit son tat de fonctionnement. le produit ne fonctionne pas normalement en suivant e) Si le produit a t chapp ou si le cabinet a t endommag. f) L'appareil doit tre inspect et rparer ds que vous constatez une baisse de ses performances. 25. Remarque l'installateur du systme CATV Ce rappel est destin attirer l'attention de l'installateur du systme CATV sur l'article 820-40 du NEC qui fournit des directives pour la mise la terre adquate et, en particulier, spcifie que le cble de mise la terre doit tre reli au systme de la mise la terre du btiment, aussi prs que possible du point d'entre du cble. NOTE : Faites appel au personnel qualifi pour tout besoin de rparation. Une rparation est ncessaire lorsque l'appareil a t endommag de quelque faon tel que :
le cordon d'alimentation ou la fiche a t endommage, du liquide a t renvers dans l'appareil, l'appareil a t expos la pluie ou l'humidit, l'appareil a t chapp ou l'appareil ne fonctionne pas normalement. 6 PR SENTATION G N RALE DU PRODUIT VUE AVANT 1 2 VUE DU DESSOUS 3 3 3 PANNEAU DE CONTRLE 5 7 4 POWER SOURCE SB PAIR 9 CAISSON DE BASSES 6 15 16 PANNEAU ARRIRE L R 8 LINE IN USB AUX IN OPT IN DC 24V 10 11 12 13 14 INDICATOR POWER INDICATOR STANDBY DC 24V 17 18 19 20 1. Indicateur de source 2. Capteur de la tlcommande 3. Effets lumineux LED 4. Bouton Veille/Source 5. Bouton rduction du volume 6. Bouton augmentation du volume 7. Bouton Prcdent 8. Bouton Suivant 9. Bouton Association SB 10. Jack ENTRE LIGNE 11. Jack ENTRE AUX 12. Jack ENTRE OPTIQUE 13. Port USB 14. Jack alimentation secteur 15. Effets lumineux LED 16. Haut-parleur 17. Voyant indicateur 18. Voyant indicateur dalimentation 19. Bouton Veille 20. Jack alimentation secteur 7 TLCOMMANDE 1 2 3 4 AUX OPTICAL LINE IN USB 5 MUSIC TALK MOVIE Sound Mode STANDARD VOL 6 7 8 9 10 11 12 13 14 1. Bouton
(Marche/Arrt) 2. Bouton AUX 3. Bouton ENTRE LIGNE 4. Bouton 5. Mode son (MUSIQUE, VOIX, FILM, STANDARD)
(Prcdent) 6. Bouton
(Muet) 7. Bouton
(Effets lumineux) 8 8. Bouton 9. Bouton OPTIQUE
(Bluetooth) 10. Bouton 11. Bouton USB
(Slection de mode) 12. Bouton
(Suivant) 13. Bouton 14. Bouton - + (rduction/augmentation
(Lecture/ Pause) du volume) INSTALLATION DE LA PILE DANS LA TLCOMMANDE Premire utilisation Retirez et jetez la languette disolation, comme illustr dans la Fig. 1. Fig.1 Remplacer la pile pour la tlcommande 1. Sortez le support de la pile, comme illustr dans la Fig. 2. 2. Remplacez lancienne pile-bouton par une nouvelle pile-bouton de type CR2025, le symbole de polarit vers le haut, comme illustr dans la Fig. 3. 3. Remettez le support de la pile en place, comme illustr dans la Fig. 4. OPEN 3V CR2025 Fig.2 Fig.3 3 V C R 2 0 2 5 O P E N Fig.4 PRCAUTIONS CONCERNANT LES PILES Respectez ces consignes lorsque vous utilisez une pile dans cet appareil :
1. Utilisez seulement une pile de la taille et du type spcifi. 2. Assurez-vous de respecter le sens de polarits lorsque vous installez la pile, indiqu dans le compartiment piles. Une pile insre lenvers peut endommager lappareil. 3. Ne pas mlanger diffrents types de piles (par ex. : alcaline et carbone-zinc) ni des piles uses avec des piles neuves. 4. Lorsque les piles sont vides, ou que vous ne prvoyez pas dutiliser lappareil pendant une dure prolonge, retirez les piles pour rduire les risques de dommage ou de blessure causs par la fuite de liquide de pile. 5. Ne pas tenter de recharger une pile qui nest pas conue pour cela. Cette dernire peut surchauffer ou se fendre. (suivez les instructions du fabricant de la pile). 6. N'exposez pas une pile des chaleurs extrmes en la plaant au soleil ou proche d'un feu. 7. Nettoyez les contacts des piles et ceux de lappareil avant dinstaller la pile. 8. La tlcommande et livre avec une pile-bouton. Si la pile-bouton est avale, elle peut entraner de svres brlures internes en lespace de seulement 2 heures, et peut causer la mort. Garder les piles neuves et usages hors de porte des enfants. Si le compartiment piles ne se ferme pas correctement, cessez dutiliser le produit, et gardez-le hors de porte des enfants. Si vous pensez que les piles ont pu tre avales ou enfonces dans une partie du corps, prenez immdiatement contact avec un mdecin. 9 AVERTISSEMENT !
Les piles-bouton peuvent causer des blessures graves, et mme la mort en cas dingestion. liminez-les dans le respect des consignes ! Rangez les piles hors de porte des enfants !
ATTENTION Risque dexplosion si la pile est incorrectement remplace. Remplacez-la seulement par une pile dun type identique ou quivalent. Porte de fonctionnement de la tlcommande Lunit peut ne pas fonctionner correctement si un obstacle se trouve entre lunit et le transmetteur. Si la lumire directe du Soleil, une lampe incandescence ou fluorescente, ou tout autre type le CAPTEUR DE LA de source lumineuse puissante brille directement dans TLCOMMANDE, cela peut rendre son fonctionnement peu fiable. 16,4 pieds (5 mtres) AUX OPTICAL LINE IN USB MUSIC TALK MOVIE Sound Mode STANDARD VOL 10 POSITIONNEMENT ET MONTAGE 1. Positionner lappareil sur une table - Ventilation Lorsque vous placez lunit et le caisson de basses sur un centre multimdia, une tagre ou un autre type despace clt, assurez-vous de mnager un espace suffisant pour la ventilation. Sinon, la chaleur gnre peut causer des risques dincendie. 2-3 pouces (5 8 cm) POWER SOURCE SB PAIR 2-3 pouces
(5 8 cm) 2-3 pouces (5 8 cm) 2-3 pouces (5 8 cm) 2. Distance dinstallation 873 mm (34,4 pouces) 2.1 Montage sur un mur de bois 34.4 inches
(Vis non incluses) A. Marquez la position des vis de montage sur le mur laide dun crayon. B. Percez les trous directement dans les marques faites sur le mur et laissez un espace libre denviron 0,3 pouce (7 mm) entre la tte de vis et le mur pour suspendre la barre-son. C. Accrochez la barre-son sur les vis de montage. Assurez-vous que lensemble est ferme et stable. 11 2.2 Montage sur un mur de briques 34.4 inches
(vis et chevilles de fixation non incluses) A. Marquez la position des vis de montage sur le mur laide dun crayon. B. Percez 2 trous sur le mur avec une perceuse puissante. C. Insrez les chevilles et enfoncez-les avec un marteau dans les trous. D. Vissez les vis dans les chevilles et laissez un espace libre denviron 0,3 pouce (7 mm) entre la tte de vis et le mur pour suspendre la barre-son. E. Suspendez la barre-son sur les vis de montage. Assurez-vous que lensemble est ferme et stable. 12 UTILISATION GNRALE 1. Branchez ladaptateur CC 24 V, 2 A dans le jack alimentation secteur de lunit principale. Branchez ladaptateur une prise murale dlivrant un courant de type CA 110~240 V;
50/60 Hz. Lindicateur de mode sur lunit principale sillumine en ROUGE. 2. Branchez ladaptateur CC 24 V, 2 A dans le jack alimentation secteur du caisson de basses. Branchez ladaptateur une prise murale dlivrant un courant de type CA 110~240 V;
50/60 Hz. Lindicateur de mode sur le caisson de basses sillumine en ROUGE. 3. Maintenez le bouton dalimentation appuy sur lunit ou appuyez sur le bouton sur la tlcommande pour allumer lunit. Les effets lumineux LED sactiveront. Appuyez sur le bouton VEILLE sur le caisson de basses pour lallumer. 4. Aprs quelques secondes, lunit principale se connecte automatiquement au caisson de basses. Lindicateur dassocation sur le caisson de basses sillumine en bleu continu. NOTE IMPORTANTE : Si lINDICATEUR DASSOCIATION sur le CAISSON DE BASSES reste teint, cela veut dire quil nest pas connect correctement lunit principale. Suivez alors les tapes suivantes :
A : Maintenez appuy le bouton dassociation CB sur lunit principale pendant 3 5 secondes. B : Maintenez appuy le bouton VEILLE sur le CAISSON DE BASSES pour lteindre, puis appuyez sur le bouton VEILLE de nouveau sur le CAISSON DE BASSES pour lallumer de nouveau. LINDICATEUR DASSOCIATION sur le CAISSON DE BASSES clignote plusieurs fois puis steint. Cela indique que le CAISSON DE BASSES est correctement connect lunit principale. C : Appuyez sur le bouton association ASSOCIATION CB sur lunit principale. Lindicateur dassociation sur le caisson de basses sillumine en BLEU. 5. Appuyez sur le bouton sur la tlcommande, ou appuyez sur le bouton Alimentation/Source sur lunit de manire rpte pour slectionner le mode dsir. Vous pouvez galement appuyer sur le bouton AUX, OPTIQUE, tlcommande pour slectionner le mode dsir. Lindicateur sur lavant de lunit sillumine :
, ENTRE LIGNE sur la Bleu..........................................................................................................Mode Bluetooth Vert.................................................................................................Mode ENTRE LIGNE Violet (rouge+bleu)............................................................................Mode ENTRE AUX Orange (rouge+vert).................................................................Mode ENTRE OPTIQUE Indigo (bleu+vert)......................... Mode USB 13 6. Pendant la lecture :
~ Appuyez sur le bouton + ou - de manire rpte sur lunit pour rgler le volume.
~ Appuyez sur le bouton sur la tlcommande pour couper le son. Lindicateur de mode sur lunit principale clignote. Appuyez de nouveau pour rtablir le son.
~ Appuyez sur le bouton MUSIQUE sur la tlcommande pour activer le mode MUSIQUE.
~ Appuyez sur le bouton VOIX sur la tlcommande pour activer le mode VOIX.
~ Appuyez sur le bouton FILM sur la tlcommande pour activer le mode FILM.
~ Appuyez sur le bouton STANDARD sur la tlcommande pour rtablir le mode par dfaut.
~ Appuyez sur le bouton sur lunit ou sur la tlcommande de manire rpte pour slectionner diffrents effets LED. Mode 1 Mode 2
: Lclairage LED RGB changera de couleur et clignotera de manire rpte, en alternance.
: Lclairage LED sera illumin en rouge continu. Mode 3
: Lclairage LED sera illumin en bleu continu. Mode 4
: Lclairage LED sera illumin en vert continu. Mode 5
: Lclairage LED sera illumin en jaune. Mode 6 : Lclairage LED sera illumin en violet. Mode 7
: Lclairage LED sera illumin en bleu clair. Mode 8
: Lclairage LED sera illumin en blanc.
~ Maintenez le bouton appuy sur la tlcommande pour slectionner diffrents effets dclairage LED. 7. Appuyez sur le bouton Alimentation/Source sur lunit ou sur le bouton sur la tlcommande pour teindre lunit. Maintenez le bouton VEILLE appuy sur le caisson de basses pour lteindre. 14 FONCTION BLUETOOTH 1. Allumez lunit principale et le caisson de basses, et associez-les comme dcrit ci-dessus. 2. Appuyez sur le bouton Alimentation/Source sur lunit ou sur le bouton la tlcommande de manire rpte, ou appuyez sur le bouton Lindicateur Bluetooth sur le devant de lunit clignote en bleu. directement pour activer le mode Bluetooth. 3. Allumez lappareil Bluetooth externe, et activez le mode Bluetooth. Lancez une recherche de lunit. 4. Lorsque MONSTER SB1 apparat, slectionnez le nom et effectuez la connexion. 5. Lindicateur sillumine en continu pour confirmer que la connexion est effectue. 6. Pendant la lecture :
~ Appuyez sur le bouton ou sur le bouton sur la tlcommande pour sauter des pistes.
~ Appuyez sur le bouton sur la tlcommande pour mettre en pause, appuyez de nouveau pour reprendre la lecture. 7. Maintenez le bouton appuy pour interrompre la connexion actuelle et activer le mode dassociation. Vous pouvez alors associer de nouveaux appareils avec la barre son. NOTE : Lunit sera automatiquement connecte au dernier appareil Bluetooth associ, lorsque le mode Bluetooth est activ sur chacun, et quil se trouvent porte de connexion. 15 FONCTION ENTRE AUX Vous pouvez connecter un lecteur audio (comme tlphone mobile, un lecteur MP3, etc.) lunit et en diffuser le son depuis les hauts-parleurs de lunit. 1. Branchez une extrmit du cble ENTRE AUX dans le jack ENTRE AUX de l'unit. 2. Branchez lautre extrmit du cble ENTRE AUX dans le port couteurs ou Sortie Aux du lecteur externe. LINE IN USB L R AUX IN OPT IN DC 24V Vue arrire MP3 Player Mobile Phone Pour connecter des tlphones ; une sortie AUX ; un jack Sortie Ligne dun appareil externe
(comme un lecteur MP3, un tlphone, un iPod/iPad, etc.) 3. Allumez lunit principale et le caisson de basses, et associez-les comme dcrit ci-dessus. 4. Appuyez sur le bouton Alimentation/Source sur lunit ou sur le bouton sur la tlcommande de manire rpte ou appuyez sur le bouton AUX sur la tlcommande directement pour activer le mode ENTRE AUX. Lindicateur ENTRE AUX sur le devant de lunit sillumine en violet (rouge+bleu). 5. Allumez le lecteur externe connect et lancer la lecture de la musique comme dhabitude. 6. Pendant la lecture :
~ Appuyez sur le bouton pour reprendre la lecture. sur la tlcommande pour mettre en pause, appuyez de nouveau 16 UTILISATION DU MODE ENTRE LIGNE Vous pouvez connecter un lecteur audio/vido externe (comme un tlviseur, un lecteur DVD, etc.) lunit et en diffuser le son depuis les hauts-parleurs de lunit. 1. Branchez une extrmit du cble entre ligne dans les jacks ENTRE LIGNE (G et D) de l'unit. 2. Branchez lautre extrmit du cble entre ligne dans les jacks ENTRE LIGNE (G/D) du tlviseur, du lecteur DVD, etc. Blanc LINE IN USB L R AUX IN OPT IN DC 24V Rouge Vue arrire L R Video Jacks sortie ligne du tlviseur/lecteur DVD, etc. 3. Allumez lunit principale et le caisson de basses, et associez-les comme dcrit ci-dessus. 4. Appuyez sur le bouton Alimentation/Source sur lunit ou sur le bouton sur la tlcommande de manire rpte ou appuyez sur le bouton ENTRE LIGNE de la tlcommande directement pour activer le mode ENTRE LIGNE. Lindicateur ENTRE LIGNE sur le devant de lunit sillumine en vert. 5. Allumez le lecteur externe connect et lancer la lecture de la musique comme dhabitude. 17 UTILISATION DU MODE OPTIQUE 1. Connectez le jack de sortie optique du lecteur externe (comme un tlviseur, un lecteur DVD, etc.) au jack ENTRE OPTIQUE sur larrire de lunit avec le cble de connexion optique, comme illustr ci-dessous : (pour format PCM seulement). LINE IN USB L R AUX IN OPT IN DC 24V Vue arrire Cble de connexion optique Tlviseur, lecteur DVD, etc. OPTICAL OUT 2. Allumez lunit principale et le caisson de basses, et associez-les comme dcrit ci-dessus. 3. Appuyez sur le bouton Alimentation/Source sur lunit ou sur le bouton sur la tlcommande de manire rpte ou appuyez sur le bouton OPTIQUE de la tlcommande directement pour activer le mode ENTRE OPTIQUE. Lindicateur ENTRE OPTIQUE sur le devant de lunit sillumine en orange (rouge+vert). 4. Allumez le lecteur externe connect et lancer la lecture de la musique comme dhabitude. Activez la sortie audio numrique, et slectionnez le type PCM (Pulse Code Modulation). Picture AudioAudio Time Setup Lock Off Sound Mode Bass Treble Balance Surround AVL Digital Output Digital Output Audio Language Standard Off Off PCM PCM English Select Move MENU Exit 18 LECTURE DEPUIS USB 1. Branchez le lecteur USB au port USB situ sur le panneau arrire de lunit. LINE IN USB L R AUX IN OPT IN DC 24V Vue arrire USB 2. Allumez lunit principale et le caisson de basses, et associez-les comme dcrit ci-dessus. 3. Appuyez sur le bouton Alimentation/Source sur lunit ou sur le bouton sur la tlcommande de manire rpte ou appuyez sur le bouton USB de la tlcommande directement pour activer le mode USB. Lindicateur USB sur le devant de lunit sillumine en indigo (bleu+vert). 4. Pendant la lecture :
~ Appuyez sur le bouton
~ Appuyez sur le bouton pour reprendre la lecture. ou sur le bouton sur la tlcommande pour mettre en pause, appuyez de nouveau sur la tlcommande pour sauter des pistes. 19 PROBLME Pas dalimentation DPANNAGE CAUSE POSSIBLE SOLUTION POSSIBLE Ladaptateur secteur nest pas branch. Branchez ladaptateur lunit et la prise murale. Lunit est teinte. Pas de son, ou volume trs bas Le niveau de volume est au minimum. Lappareil associ/connect nest pas en mode de lecture. Maintenez le bouton Alimentation/Source appuy sur lunit ou appuyez sur le bouton sur la tlcommande pour allumer lunit. Augmentez le volume en appuyant sur le bouton Vol+ sur lunit ou sur le bouton VOL+ sur la tlcommande. Lancez la lecture de la musique/du film sur lappareil connect comme dhabitude et assurez-vous que le niveau de volume est assez lev. La source slectionne est incorrecte. Appuyez sur le bouton Alimentation/Source sur lunit ou Son dform/craquements Niveau de volume trop lev. La tlcommande ne fonctionne pas Hors de porte sur la sur le bouton tlcommande pour slectionner le mode dsir. Rduisez le volume en appuyant sur le bouton - sur lunit ou sur le bouton VOL- sur la tlcommande. Rduisez le volume sur lappareil associe / connecte. Pointez la tlcommande vers le capteur de la tlcommande sur lunit, en vous tenant une distance moins de 16 pieds, selon un angle de +/- 30 degrs. chec de rception Bluetooth La pile de la tlcommande est vide. Remplacez la pile par une pile neuve. Lappareil externe est trop loign de lunit. Les appareils ne sont pas associs. Rapprochez lappareil BT externe de lunit. Associez lunit lappareil BT en suivant les procdures dcrites dans ce mode demploi. 20 CARACTRISTIQUES TECHNIQUES Alimentation.............................................................................................CA 100~240 V, 50/60 Hz Source dalimentation .....................................................................CC 24 V 2 A Puissance audio de lunit............................................................................................4 x 12,5 W Puissance audio du caisson de basses.................................................................................50 W Porte efficace de la connexion Bluetooth en espace dgag . jusqu 32 pieds (10 mtres) Porte efficace de la tlcommande en espace dgag ........ jusqu 16 pieds (5 mtres) CONTENU DE LEMBALLAGE 1 x Unit principale 1 x Caisson de basses 1 x Mode d'emploi 1 x Tlcommande 1 x Cble ENTRE AUX (1 mtre) 1 x Cble ENTRE LIGNE (1,5 mtre) 1 x Adaptateur dalimentation pour lunit (24 V, 2 A) 1 x Adaptateur dalimentation pour le caisson de basses (24 V, 2 A) LES CARACTRISTIQUES TECHNIQUES ET LA LISTE DES ACCESSOIRES SONT SUJETTES MODIFICATION SANS PRAVIS Est une marque dpose ou une marque de Bluetooth SIG Inc. Toutes les autres marques et noms de marques dposes sont la proprite de leurs propritaires respectifs. Monster, le logo Monster et le logo en forme de M sont des marques dposes de Monster, Inc. et ses subsidiaires aux U.S. et dans les autres pays, et sont sous autorisation. Pour obtenir de lassistance pour rparation ou plus dinformations, appelez le : 1-800-968-9853. Curtis International Ltd. 7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3 www.curtisint.com Pour dposer une demande de garantie, ne renvoyez pas ce produit au magasin. Envoyez un email ladresse support@curtiscs.com ou appelez le 1-800-968-9853. 21 Pour faire une demande de garantie, ne retournez pas ce produit au magasin. Veuillez envoyer un courriel lectronique support@curtiscs.com ou appeler le 1-800-968-9853. 90 jours de garantie Ce produit est garanti contre tout dfaut de matriel et de fabrication pendant une priode de quatre-vingt-dix (90) jours compter de la date d'achat d'origine. Pendant cette priode, votre seul recours est la rparation ou le remplacement de ce produit ou composant jug dfectueux, notre choix; Cependant, vous tes responsable de tous les cots associs au retour du produit. Si le produit ou le composant n'est plus disponible, nous le remplacerons par un produit similaire de valeur gale ou suprieure. Avant l'envoi d'un produit de remplacement, le produit doit tre rendu inutilisable ou nous tre renvoy. Cette garantie ne couvre pas le verre, les filtres, lusure normale, une utilisation non conforme aux instructions imprimes, ni les dommages matriels rsultant dun accident, dune altration, dune utilisation abusive ou abusive. Cette garantie sapplique uniquement lacheteur initial ou au destinataire du cadeau. Conservez le reu de vente original, car une preuve d'achat est ncessaire pour faire une rclamation de garantie. Cette garantie est annule si le produit est utilis pour un usage autre que domestique ou s'il est soumis une tension ou une forme d'onde autre que celle indique sur l'tiquette (par exemple, 120V ~
60Hz). Nous excluons toute rclamation pour des dommages spciaux, accessoires et conscutifs causs par une violation de la garantie explicite ou implicite. Toute responsabilit est limite au montant du prix d'achat. Toute garantie implicite, y compris toute garantie lgale ou condition de qualit marchande ou d'adquation un usage particulier, est refuse sauf dans la mesure o la loi l'interdit, auquel cas cette garantie ou condition est limite la dure de cette garantie crite. Cette garantie vous confre des droits lgaux spcifique. Vous pouvez avoir d'autres droits lgaux qui varient selon votre lieu de rsidence. Certains tats ou provinces n'autorisant pas les limitations de garanties implicites ou de dommages spciaux, accessoires ou indirects, les limitations ci-dessus peuvent ne pas vous concerner. Pour un service plus rapide, trouver le modle, le type et les numros de srie sur votre appareil. This device complies with Industry Canada RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) il ne doit pas produire de brouillage et
(2) l utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fomctionnement du dispositif.
- This Class B digital apparatus complies with Canadian ICES-003.
- Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. The distance between user and products should be no less than 20cm La distance entre l'utilisateur et les produits ne doit pas tre infrieure 20 cm
1 2 | Internal photos | Internal Photos | 524.10 KiB |
InternalPhoto LoRaModule LoRaAntenna BTAntenna BTModule
1 2 | Label and location | ID Label/Location Info | 372.49 KiB |
a i ee MODEL NO.: MSB3787W 37" Bluetooth Soundbar with Wireless Subwoofer POWER SOURCE: DC === 24V, 2A -@-
FCC ID: OKUSBB91460 IC: 10765A-SBB91460 Imported by Curtis International Ltd This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. WARNING:
Cancer-www.P65Warnings.ca.gov. For service assistance and product information, please call: 1-800-968-9853. Pour obtenir assistance et information appelez: 1-800-968-9853. Curtis International Ltd. 7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3 www.curtisint.com Made in China
1 2 | Authorization Letter | Cover Letter(s) | 20.51 KiB |
Tel: 408-526-1188 Fax: 408-526-1088 Email: sales.eaw@us.bureauveritas.com 775 Montague Expressway Milpitas, CA 95035 Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Revised wording (obsolete) Updated company template (obsolete) Updated letter information (obsolete) Added FCC ID field (obsolete) Updated company name & logo (current) Revision History From 1.0 1.0 2.0 3.0 4.0 5.0 To 1.0 2.0 3.0 4.0 5.0 6.0 Approved Date Nov-14-2006 Sept25-2007 Jan-31-2012 May-23-2014 Sep-16-2014 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 2019-11-19 SHENZHEN JUNLAN ELECTRONIC LTD To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, ___ SHENZHEN JUNLAN ELECTRONIC LTD__hereby authorize BVCPS.Inc. to act as a Certification Body for certifying for the following project(s):
(37 inch Bluetooth Soundbar with Wireless Subwoofer, MSB3787W, SBB-91460, SBB-
XXXX(XXXX where X can be 0-9, A-Z)) FCC ID: OKUSBB91460 Sincerely, Sincerely, peng xiao / safety engineer E-mail:
Phone:
Fax:
Address:
xp@jump-lan.com 0755-27309169 0755-27309497 No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District, Shenzhen, China SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0
1 2 | Family Model Letter | Cover Letter(s) | 32.13 KiB |
Shenzhen Junlan Electronic Ltd Shenzhen Junlan Electronic Ltd Model Confirmation Letter FCC ID: OKUSBB91460 We, Shenzhen Junlan Electronic Ltd certify the Product Name 37 inch Bluetooth Soundbar with Wireless Subwoofer, Model No.: MSB3787W, SBB-91460, SBB-XXXX(XXXX where X can be 0-9, A-Z) These models only the color of appearance is different, the others are the same. Sincerely, peng xiao / safety engineer E-mail:
Phone:
Fax:
Address:
xp@jump-lan.com 0755-27309169 0755-27309497 No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District, Shenzhen, China
1 2 | LTC Letter | Cover Letter(s) | 22.80 KiB |
775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: sales.eaw@us.bureauveritas.com Confidentiality Request Letter Revision History From Reason for Amendment (current / obsolete) Initial Release (obsolete) Adding CFR 2.459 (obsolete) Updated company template & Added text box Added IC confidentiality letter form (obsolete) Corrections to STC form. Added reference to KDB
(obsolete)
(obsolete) Updated company logo (current) 1.0 1.0 2.0 3.0 4.0 5.0 To 1.0 2.0 3.0 4.0 5.0 6.0 Approved Date Nov-14-2006 August 11 - 2008 Jan-31-2012 March-26-2015 Nov-19-2015 Jun-26-2019 SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 6.0 2019-11-19 37 inch Bluetooth Soundbar with Wireless Subwoofer To:
Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: OKUSBB91460 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as:
- Block Diagram
- Schematics
- Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Sincerely, peng xiao / safety engineer E-mail:
Phone:
Fax:
Address:
xp@jump-lan.com 0755-27309169 0755-27309497 No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District, Shenzhen, China SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 6.0
1 2 | SDoC Declaration Letter | Attestation Statements | 11.87 KiB |
SHENZHEN JUNLAN ELECTRONIC LTD Date: 2019-11-19 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: OKUSBB91460 To Whom It May Concern:
This letter is to ascertain that 37 inch Bluetooth Soundbar with Wireless Subwoofer, MODEL No.:
MSB3787W, SBB-91460, SBB-XXXX(XXXX where X can be 0-9, A-Z) has been the units used for conducting FCC compliance testing, the SDoC part will be tested by FCC recognized test lab -
EMTEK (SHENZHEN) CO., LTD. Accredited by FCC, August 03, 2017 Designation Number: CN1204 Test Firm Registration Number: 882943 Accredited by A2LA, July 31, 2017 The Certificate Registration Number is 4321.01. TEL: 86-755-26954280 FAX: 86-755-26954282 If you have any question or concerns, pls. contact us. Sincerely, Sincerely, peng xiao / safety engineer E-mail:
Phone:
Fax:
Address:
xp@jump-lan.com 0755-27309169 0755-27309497 No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District, Shenzhen, China
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-11-28 | 910 ~ 919.5 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2019-11-28
|
||||
1 2 | Applicant's complete, legal business name |
Shenzhen Junlan Electronic Ltd
|
||||
1 2 | FCC Registration Number (FRN) |
0021880893
|
||||
1 2 | Physical Address |
No.277 PingKui Road, Shijing Community, Pingshan Street, Pingshan New District
|
||||
1 2 |
No.277 PingKui Road, Shijing Community
|
|||||
1 2 |
Shenzhen
|
|||||
1 2 |
Shenzhen, N/A
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
t******@siemic.com
|
||||
1 2 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
1 2 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
OKU
|
||||
1 2 | Equipment Product Code |
SBB91460
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
p******** x********
|
||||
1 2 | Title |
safety engineer
|
||||
1 2 | Telephone Number |
0755-********
|
||||
1 2 | Fax Number |
0755-********
|
||||
1 2 |
x******@jump-lan.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 2 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Subwoofer | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
EMTEK (Shenzhen) Co., Ltd.
|
||||
1 2 | Name |
L******** W******
|
||||
1 2 | Telephone Number |
86 75********
|
||||
1 2 |
w******@emtek.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 910.00000000 | 919.50000000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0017000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC