FCC ID: 2AAPKXYW1038 5 in 1 Wireless Charging Station with Alarm Clock and Nightlight

USER MANUAL Diagram Smart watch wireless charging area Mobile phone charging area Wireless headset charging area Warm yellow light Mode Up Clock display Click On/Off Down Small night light switch Time display LED light charging indicator Smartphone Charging indicator ON/OFF 1. When powered on, the indicator light will flash and then turn off, indicating that the product is on standby. 2. 3. When placing the wireless charging phone separately in the phone charging

. area for charging, the colorful indicator light lights up and enters the charging state. Remove the charging product, the charging indicator light goes out, and the product enters the standby state. Remarks:

Usage tips:

Product parameters:

CR2032 battery position Product heat dissipation hole Battery installation:

Specifications:

Input TYPE-C interface USB output:1A galvanic action:

Note: When using the wireless charger to charge 3 devices simultaneously, it is advisable to use a plug-in adapter above QC/

PD 30W to work at its best. Time Setting:

In time mode: Press and hold the [MODE] key for 2 seconds to enter the 1. time setting state. The "hour" flashes. Press the key to adjust the "hour", press the key to adjust the "hour", again press the [MODE] key to set the

"minute", press the key to adjust the "minute", and press the key to adjust the "minute"; Long press and hold the key You can quickly adjust the time division and then press the [MODE] key again to complete the time setting. If there is no operation for 10 seconds, it will automatically return to the time mode and maintain the settings before returning. 12/24 Hour Conversion:

1.In time mode: Press and hold the key to switch to the 12/24 hour system:

2.The "AM/PM" icon is displayed on the morning/afternoon of the 12 hour system Alarm Settings:

1. In time mode, short press the [Mode] key to switch to alarm mode. At this point, the 'AL' icon will be displayed. Press and hold the [Mode] key for 2 seconds to enter your desired time setting state. The "hour" flashes, press the key to adjust it up (hour), and press the key to adjust it down. Short press the [Mode] key to set the "minute", press the key to adjust the "minute" upwards, press the key to adjust the "minute" downwards, and long press the key to quickly adjust the time division setting and activate the alarm clock. Then again press the [Mode] key to complete the alarm, and the icon will light up. 2. In alarm mode, short press the key to turn the alarm on/off. After turning on the alarm clock, the icon will appear on any interface. 3. If there is no operation within 10 seconds, it will automatically return to time mode and keep the settings and alarm clock on or off before returning FAQ:

1. Is the phone not charging?

The phone may not properly be aligned with the charging coil or the wireless charger may not be plugged in properly 2. Heats up while charging?

It is normal for the charging coil to mildly heat up while charging a smartphone. 3. Phone charging intermittently A. lf the charging current of the adapter is not enough or the voltage is unstable, use a QC3.0 fast charging adapter to charge. B. The charging position is not aligned, and the electromagnetic induction is not good. The charging position should be adjusted. Matters needing attention 1. If the product is being used for fast charging, please use a UL or ETL certified 9V-2A (fast charging) power adapter. Use the included power cable for this product. If the product is being used for standard charging, use a UL or ETL certified 5V-2A power adapter. 2. If the wireless charger is over heating while there are no devices charging, unplug it completely to cool down. RMJ Group International declares that radio equipment LAWC-2700 is in compliance with directive 2014/53/EU. The EU Declaration of conformity is available at:

www.rmjgroup.com/docs FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement.

4.5cm 2.5cm FCC ID: 2AAPKXYW1038 Shenzhen Kingsun Enterprises Co., Ltd. Product name: 5 in 1 Wireless Charging Station with Alarm Clock and Nightlight This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Location

November 29, 2023 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Shenzhen Alpha Product Testing Co., Ltd. Address: Building i, No.2, Lixin Road, Fuyong Street, Baoan District, 518103, Shenzhen, Guangdong, China

(Name and addressperson). to act as our agent in the Person: Mark Zhu preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Shenzhen Kingsun Enterprises Co., Ltd. Address: 25F,CEC information Building, Xinwen Road, Futian District, Shenzhen, Guangdong, P.R. China ( applicant name and address). Signature:

Name Position Company Name Address Tel Fax Email Sydney Chen Manager Shenzhen Kingsun Enterprises Co., Ltd. 25F,CEC information Building, Xinwen Road, Futian District, Shenzhen, Guangdong, P.R. China 0755-83134433 0755-82947077 mchd30@kingsun1.com

November 29, 2023 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AAPKXYW1038 Product Name: 5 in 1 Wireless Charging Station with Alarm Clock and Nightlight Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

Schematics Long-term confidential Block diagram Long-term confidential Operation description Long-term confidential These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Signature:

Name Position Company Name Address Tel Fax Email Sydney Chen Manager Shenzhen Kingsun Enterprises Co., Ltd. 25F,CEC information Building, Xinwen Road, Futian District, Shenzhen, Guangdong, P.R. China 0755-83134433 0755-82947077 mchd30@kingsun1.com

Shenzhen Kingsun Enterprises Co., Ltd. Covered Equipment Certification Attestation Letter 11/29/2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2AAPKXYW1038 Shenzhen Kingsun Enterprises Co., Ltd. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment. Shenzhen Kingsun Enterprises Co., Ltd. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Signed:

Printed name: Sydney Chen Title: Manager Company Name: Shenzhen Kingsun Enterprises Co., Ltd. Date: 11/29/2023

Shenzhen Kingsun Enterprises Co., Ltd. U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) TO:

Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Baihetian Innovative Solutions FRN: 0033401605 Contact Name: Kenneth Young Street Address: 6837 Chase Rd City/Province/Zip: Dearborn, MI 48126 Telephone No: 313-395-3113 Email: ken.young@baihetiansolutions.com This letter is to confirm that we (Baihetian Innovative Solutions) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature:

Date: Nov 29, 2023 Signed by (Printed Name/Title): Kenneth Young/Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Shenzhen Kingsun Enterprises Co., Ltd. FRN: 0022866974 Grantee Code: 2AAPK Contact Name: Sydney Chen Street Address: 25/F, CEC Information Building, Xinwen Rd., City/Province/Zip: Shenzhen, Guangdong 518034 China Telephone No: 0755-83134433 Email: mchd30@kingsun1.com Applicant Signature:

Date: Nov.29, 2023 Signed by (Printed Name/Title): Sydney Chen /Manager FCC ID: 2AAPKXYW1038