MANUAL Setting up the mouse ON/OFF Switch 1. Slide the battery door open, install 2 AAA batteries, close the battery door. 2. Turn on the mouse using the power button on the baottom of the mouse. The red LED light on the bottom of the mouse should be on, indicating that the batteries were installed properly and mouse is operational. VIEW:
1. Scroll Wheel, to scroll down the page you are viewing, roll the wheel backwards. To scroll to the top of a page, roll the wheel, forward. 2. Universal forward and back buttons 3. Left and Right mouse buttons 4. Speed change buttom(adjust from 800 dpi to 1600 dpi) Operation:
1. While this mouse will operate over virtuall any surface, shiny or glass surfaces may diminish the performance of the mouse. We recommend using the mouse on non reflective surfaces for optimal performance. 2. Having the mini-receiver close to any electronic products with bluetooth technology may cause interference with the signal. 3. This mouse has an automatic sleep function to preserve battery life. When the mouse is not used for a period of time, it will go to sleep. To wake the mouse press any key or move the scrollwheel. If the mouse does not resume functioning, verify that the power button has not been turn off. 4. If the mouse will not be used for an extended period of time, turn the power off to preserve battery life. 5. This mouse will function up to 20ft away from the minireceiver. FCC NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.