SSB5118R Mobile phone TCT190605E005 FCC ID 15.247 BT Test Report

Company: Shenzhen Link Win Technology Co., Ltd

FCC ID: 2AQ4G-SSB5118R

submitted	available	document details (if available)	source link
July 26 2019	July 26 2019

exhibit
download
text

various

TCT190605E005 FCC ID 15.247 BT

Test Report

pdf

5.08 MiB

July 26 2019

TEST REPORT FCC ID: 2AQ4G-SSB5118R Product: Mobile phone Model No.: SSB5118R Additional Model No.: AMS5118R, LM5118R Trade Mark: MAZE SPEED, SOHO STYLE, LUSH MINT Report No.: TCT190605E005 Issued Date: Jul. 02, 2019 Issued for:

Shenzhen Link Win Technology Co., Ltd 9F, Zhengqilong lndustrial Building, 1st Rd Gushu, Xixiang, Bao'an, Shenzhen, China Issued By:

1B/F., Building 1, Yibaolai Industrial Park, Qiaotou, Fuyong, Baoan District, Shenzhen Tongce Testing Lab. Shenzhen, Guangdong, China TEL: +86-755-27673339 FAX: +86-755-27673332 Note: This report shall not be reproduced except in full, without the written approval of Shenzhen Tongce Testing Lab. This document may be altered or revised by Shenzhen Tongce Testing Lab. personnel only, and shall be noted in the revision section of the document. The test results in the report only apply to the tested sample. Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Report No.: TCT190605E005 TABLE OF CONTENTS 1. Test Certification ..................................................................................... 3 2. Test Result Summary .............................................................................. 4 3. EUT Description ....................................................................................... 5 4. General Information ................................................................................. 7 4.1. Test environment and mode ................................................................................. 7 4.2. Description of Support Units ................................................................................ 7 5. Facilities and Accreditations .................................................................. 8 5.1. Facilities ................................................................................................................. 8 5.2. Location ................................................................................................................. 8 5.3. Measurement Uncertainty ..................................................................................... 8 6. Test Results and Measurement Data ..................................................... 9 6.1. Antenna requirement ............................................................................................ 9 6.2. Conducted Emission ........................................................................................... 10 6.3. Conducted Output Power ................................................................................... 14 6.4. 20dB Occupy Bandwidth .................................................................................... 19 6.5. Carrier Frequencies Separation ......................................................................... 24 6.6. Hopping Channel Number .................................................................................. 29 6.7. Dwell Time ............................................................................................................ 32 6.8. Pseudorandom Frequency Hopping Sequence ................................................ 37 6.9. Conducted Band Edge Measurement ................................................................ 38 6.10. Conducted Spurious Emission Measurement ................................................. 42 6.11. Radiated Spurious Emission Measurement .................................................... 46 Appendix A: Photographs of Test Setup Appendix B: Photographs of EUT Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 2 of 68 Report No.: TCT190605E005 1. Test Certification Product:

Mobile phone Model No.:

SSB5118R Additional Model No.:

AMS5118R, LM5118R Trade Mark: MAZE SPEED, SOHO STYLE, LUSH MINT Applicant:

Shenzhen Link Win Technology Co., Ltd Address:

9F, Zhengqilong lndustrial Building, 1st Rd Gushu, Xixiang, Bao'an, Shenzhen, China Manufacturer: Shenzhen Link Win Technology Co., Ltd Address:

9F, Zhengqilong lndustrial Building, 1st Rd Gushu, Xixiang, Bao'an, Shenzhen, China Date of Test: Jun. 06, 2019 Jul. 01, 2019 Applicable Standards:

FCC CFR Title 47 Part 15 Subpart C Section 15.247 FCC KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10:2013 The above equipment has been tested by Shenzhen Tongce Testing Lab. and found compliance with the requirements set forth in the technical standards mentioned above. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Tested By:

Date:

Jul. 01, 2019 Jin Wang Reviewed By:

Date:

Jul. 02, 2019 Beryl Zhao Approved By:

Date:

Jul. 02, 2019 Tomsin Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 3 of 68 Report No.: TCT190605E005 2. Test Result Summary Requirement CFR 47 Section Result Antenna Requirement 15.203/15.247 (c) AC Power Line Conducted Emission Conducted Peak Output Power 15.207 15.247 (b)(1) 20dB Occupied Bandwidth 15.247 (a)(1) Carrier Frequencies Separation 15.247 (a)(1) Hopping Channel Number 15.247 (a)(1) Dwell Time 15.247 (a)(1) Radiated Emission 15.205/15.209 Band Edge 15.247(d) Note:

1. PASS: Test item meets the requirement. 2. Fail: Test item does not meet the requirement. 3. N/A: Test case does not apply to the test object. 4. The test result judgment is decided by the limit of test standard. PASS PASS PASS PASS PASS PASS PASS PASS PASS Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 4 of 68 Report No.: TCT190605E005 3. EUT Description Product:

Model No.:

Mobile phone SSB5118R Additional Model No.:

AMS5118R, LM5118R Trade Mark:

MAZE SPEED, SOHO STYLE, LUSH MINT Bluetooth Version:

V4.0(This report is for BDR+EDR) Operation Frequency:

2402MHz~2480MHz Transfer Rate:

1/2/3 Mbits/s Number of Channel:

79 Modulation Type:

GFSK, /4-DQPSK, 8DPSK Modulation Technology:

FHSS Antenna Type:

Internal Antenna Antenna Gain:

1.2dBi Power Supply:

Rechargeable Li-ion Battery DC 3.7V AC adapter:

Adapter Information1:

MODEL: SSB-LW-001 INPUT: AC 100-240V, 50/60Hz OUTPUT: DC 5.0V, 1000mA Adapter Information2:

MODEL: SSB-LW-002 INPUT: AC 100-240V, 50/60Hz OUTPUT: DC 5.0V, 1000mA Adapter Information3:

MODEL: SSB-LW-003 INPUT: AC 100-240V, 50/60Hz OUTPUT: DC 5.0V, 1000mA Remark:

All models above are identical in interior structure, electrical circuits and components, just colors and trade mark are different for the marketing requirement. Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 5 of 68 Report No.: TCT190605E005 Operation Frequency each of channel for GFSK, /4-DQPSK, 8DPSK Channel Frequency Channel Frequency Channel Frequency Channel Frequency 2462MHz 2463MHz 2402MHz 2403MHz 2422MHz 2423MHz 2442MHz 2443MHz 0 1 10 11 18 19 20 21 30 31 38 39 40 41 50 51 58 59 2432MHz 2433MHz 2440MHz 2441MHz 2452MHz 2453MHz 2460MHz 2461MHz 60 61 70 71 78 2412MHz 2413MHz 2420MHz 2421MHz 2472MHz 2473MHz 2480MHz

Remark: Channel 0, 39 &78 have been tested for GFSK, /4-DQPSK, 8DPSK modulation mode. Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 6 of 68 Report No.: TCT190605E005 4. General Information 4.1. Test environment and mode Operating Environment:

Temperature:

Humidity:

25.0 C 56 % RH Atmospheric Pressure:

1010 mbar Test Mode:

Engineering mode:

Keep the EUT in continuous transmitting by select channel and modulations with Fully-charged battery The sample was placed 0.8m & 1.5m for the measurement below & above 1GHz above the ground plane of 3m chamber. Measurements in both horizontal and vertical polarities were performed. During the test, each emission was maximized by: having the EUT continuously working, investigated all operating modes, rotated about all 3 axis (X, Y & Z) and considered typical configuration to obtain worst position, manipulating interconnecting cables, rotating the turntable, varying antenna height from 1m to 4m in both horizontal and vertical polarizations. The emissions worst-case(Z axis) are shown in Test Results of the following pages. 4.2. Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. Equipment Model No. Serial No. FCC ID Trade Name

Note:

1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturers requirements and conditions for the intended use. 3. For conducted measurements (Output Power, 20dB Occupied Bandwidth, Carrier Frequencies Separation, Hopping Channel Number, Dwell Time, Spurious Emissions), the antenna of EUT is connected to the test equipment via temporary antenna connector, the antenna connector is soldered on the antenna port of EUT, and the temporary antenna connector is listed in the Test Instruments. Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 7 of 68 Report No.: TCT190605E005 5. Facilities and Accreditations 5.1. Facilities The test facility is recognized, certified, or accredited by the following organizations:

FCC - Registration No.: 645098 Shenzhen Tongce Testing Lab The 3m Semi-anechoic chamber has been registered and fully described in a report with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. IC - Registration No.: 10668A-1 The 3m Semi-anechoic chamber of Shenzhen TCT Testing Technology Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing 5.2. Location Shenzhen Tongce Testing Lab Address: 1B/F., Building 1, Yibaolai Industrial Park, Qiaotou, Fuyong, Baoan District, Shenzhen, Guangdong, China Tel: 86-755-27673339 5.3. Measurement Uncertainty The reported uncertainty of measurement y U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item 1 2 3 4 5 6 7 Conducted Emission RF power, conducted Spurious emissions, conducted All emissions, radiated(<1G) All emissions, radiated(>1G) Temperature Humidity MU 2.56dB 0.12dB 0.11dB 3.92dB 4.28dB 0.1C 1.0%

Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 8 of 68 Report No.: TCT190605E005 6. Test Results and Measurement Data 6.1. Antenna requirement Standard requirement:

FCC Part15 C Section 15.203 /247(c) 15.203 requirement:

An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. 15.247(c) (1)(i) requirement:

(i) Systems operating in the 2400-2483.5 MHz band that is used exclusively for fixed. Point-to-point operations may employ transmitting antennas with directional gain greater than 6dBi provided the maximum conducted output power of the intentional radiator is reduced by 1 dB for every 3 dB that the directional gain of the antenna exceeds 6dBi. E.U.T Antenna:

The Bluetooth antenna is internal antenna which permanently attached, and the best case gain of the antenna is 1.2dBi. Antenna Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 9 of 68 Report No.: TCT190605E005 6.2. Conducted Emission 6.2.1. Test Specification Test Requirement:

FCC Part15 C Section 15.207 Test Method:

ANSI C63.10:2013 Frequency Range:

150 kHz to 30 MHz Receiver setup:

RBW=9 kHz, VBW=30 kHz, Sweep time=auto Frequency range Limit (dBuV)

(MHz) 0.15-0.5 0.5-5 5-30 Quasi-peak 66 to 56*

Average 56 to 46*

56 60 46 50 Limits:

Test Setup:

Test Mode:

Refer to item 4.1 Test Procedure:

1. The E.U.T is connected to an adapter through a line impedance stabilization network

(L.I.S.N.). This provides a 50ohm/50uH coupling impedance for the measuring equipment. 2. The peripheral devices are also connected to the main power through a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination. (Please refer to the block diagram of the test setup and photographs). 3. Both sides of A.C. line are checked for maximum conducted interference. In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed according to ANSI C63.10:2013 on conducted measurement. Test Result:

PASS Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 10 of 68 Report No.: TCT190605E005 6.2.2. Test Instruments Conducted Emission Shielding Room Test Site (843) Equipment Manufacturer Model Serial Number Calibration Due Test Receiver R&S ESPI 101402 Sep. 17, 2019 LISN Schwarzbeck NSLK 8126 8126453 Sep. 20, 2019 Coax cable

(9KHz-30MHz) EMI Test Software TCT CE-05 Shurple Technology EZ-EMC N/A N/A Sep. 16, 2019 N/A Note: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to international system unit (SI). Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 11 of 68 6.2.3. Test data Report No.: TCT190605E005 Please refer to following diagram for individual Conducted Emission on Line Terminal of the power line (150 kHz to 30MHz) Note:

Freq. = Emission frequency in MHz Reading level (dBV) = Receiver reading Corr. Factor (dB) = LISN factor + Cable loss Measurement (dBV) = Reading level (dBV) + Corr. Factor (dB) Limit (dBV) = Limit stated in standard Margin (dB) = Measurement (dBV) Limits (dBV) Q.P. =Quasi-Peak AVG =average

* is meaning the worst frequency has been tested in the frequency range 150 kHz to 30MHz Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 12 of 68 Report No.: TCT190605E005 Conducted Emission on Neutral Terminal of the power line (150 kHz to 30MHz) Note1:

* is meaning the worst frequency has been tested in the frequency range 150 kHz to 30MHz. Note2:

Measurements were conducted in all three channels (high, middle, low) and three modulation (GFSK, Pi/4DQPSK, 8DPSK), and the worst case Mode (Lowest channel and GFSK) was submitted only. Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 13 of 68 Report No.: TCT190605E005 6.3. Conducted Output Power 6.3.1. Test Specification Test Requirement:

FCC Part15 C Section 15.247 (b)(3) Test Method:

KDB 558074 D01 v05r02 Section 15.247 (b) The maximum peak conducted output power of the intentional radiator shall not exceed the following: (1) For frequency hopping systems operating in the 2400-2483.5 MHz band employing at least 75 non-overlapping hopping channels, and all frequency hopping systems in the 5725-5850 MHz band: 1 watt. For all other frequency hopping systems in the 2400-2483.5 MHz band 0.125 watts. Limit:

Test Setup:

Test Mode:

Transmitting mode with modulation Test Procedure:

Use the following spectrum analyzer settings:

Span = approximately 5 times the 20 dB bandwidth, centered on a hopping channel RBW > the 20 dB bandwidth of the emission being measured VBW RBW Sweep = auto Detector function = peak Trace = max hold Allow the trace to stabilize. Use the marker-to-peak function to set the marker to the peak of the emission. Test Result:

PASS 6.3.2. Test Instruments Equipment Manufacturer Model Serial Number Calibration Due Spectrum Analyzer R&S FSU 200054 Sep. 20, 2019 RF Cable

Peak Output Power

(dBm) 1.86 0.99 0.28 Limit (dBm) Result 30.00 30.00 30.00 PASS PASS PASS Limit (dBm) Result 21.00 21.00 21.00 PASS PASS PASS Limit (dBm) Result 21.00 21.00 21.00 PASS PASS PASS Peak Output Power

(dBm) 1.48 0.61

-0.11 Peak Output Power

(dBm) 1.47 0.63

-0.06 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 15 of 68 GFSK Modulation Report No.: TCT190605E005 Lowest channel Middle channel Highest channel Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 16 of 68 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH600 kHz/Center2.402 GHzSpan6 MHz**3DBRBW 3 MHzVBW 10 MHzSWT 5 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] 1.86 dBm 2.402060000 GHzDate: 26.JUN.2019 10:48:43 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH600 kHz/Center2.441 GHzSpan6 MHz**3DBRBW 3 MHzVBW 10 MHzSWT 5 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] 0.99 dBm 2.441018000 GHzDate: 26.JUN.2019 10:49:05 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH600 kHz/Center2.48 GHzSpan6 MHz**3DBRBW 3 MHzVBW 10 MHzSWT 5 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] 0.28 dBm 2.480126000 GHzDate: 26.JUN.2019 10:49:24 Pi/4DQPSK Modulation Report No.: TCT190605E005 Lowest channel Middle channel Highest channel Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 17 of 68 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH600 kHz/Center2.402 GHzSpan6 MHz**3DBRBW 3 MHzVBW 10 MHzSWT 5 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] 1.48 dBm 2.401940000 GHzDate: 26.JUN.2019 10:50:45 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH600 kHz/Center2.441 GHzSpan6 MHz**3DBRBW 3 MHzVBW 10 MHzSWT 5 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] 0.61 dBm 2.441000000 GHzDate: 26.JUN.2019 10:51:09 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH600 kHz/Center2.48 GHzSpan6 MHz**3DBRBW 3 MHzVBW 10 MHzSWT 5 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -0.11 dBm 2.479796000 GHzDate: 26.JUN.2019 10:51:38 8DPSK Modulation Report No.: TCT190605E005 Lowest channel Middle channel Highest channel Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 18 of 68 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH600 kHz/Center2.402 GHzSpan6 MHz**3DBRBW 3 MHzVBW 10 MHzSWT 5 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] 1.47 dBm 2.401844000 GHzDate: 26.JUN.2019 10:52:14 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH600 kHz/Center2.441 GHzSpan6 MHz**3DBRBW 3 MHzVBW 10 MHzSWT 5 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] 0.63 dBm 2.440964000 GHzDate: 26.JUN.2019 10:52:35 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH600 kHz/Center2.48 GHzSpan6 MHz**3DBRBW 3 MHzVBW 10 MHzSWT 5 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -0.06 dBm 2.479946000 GHzDate: 26.JUN.2019 10:52:59 Report No.: TCT190605E005 6.4. 20dB Occupy Bandwidth 6.4.1. Test Specification Test Requirement:

FCC Part15 C Section 15.247 (a)(1) Test Method:

KDB 558074 D01 v05r02 Limit:

N/A Test Setup:

Test Mode:

Transmitting mode with modulation Test Procedure:

1. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 2. Set to the maximum power setting and enable the EUT transmit continuously. 3. Use the following spectrum analyzer settings for 20dB Bandwidth measurement. Span = approximately 2 to 5 times the 20 dB bandwidth, centered on a hopping channel; 1%

RBW5% of the 20 dB bandwidth; VBW3RBW;

Sweep = auto; Detector function = peak; Trace = max hold. 4. Measure and record the results in the test report. Test Result:

PASS 6.4.2. Test Instruments Equipment Manufacturer Model Serial Number Calibration Due Spectrum Analyzer R&S FSU 200054 Sep. 20, 2019 RF Cable

/4-DQPSK 8DPSK Conclusion Lowest Middle Highest 945.51 945.51 942.31 1254.01 1258.01 PASS 1258.01 1258.01 PASS 1258.01 1266.03 PASS Test plots as follows:

Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 20 of 68 GFSK Modulation Report No.: TCT190605E005 Lowest channel Middle channel Highest channel Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 21 of 68 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm*3DBRBW 30 kHzSWT 10 ms*VBW 100 kHz 1 PKMAXHCenter2.402 GHzSpan2 MHz200 kHz/-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -21.35 dBm 2.401544333 GHz1Delta 1 [T1 ] 0.01 dB 945.512820529 kHzD1 -0.95 dBmD2 -20.95 dBmDate: 26.JUN.2019 10:38:02 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH200 kHz/Center2.441 GHzSpan2 MHz**3DBRBW 30 kHzVBW 100 kHzSWT 10 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -22.07 dBm 2.440542333 GHz1Delta 1 [T1 ] 0.23 dB 945.512820526 kHzD1 -1.58 dBmD2 -21.58 dBmDate: 26.JUN.2019 10:40:00 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH200 kHz/Center2.48 GHzSpan2 MHz**3DBRBW 30 kHzVBW 100 kHzSWT 10 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -22.33 dBm 2.479544333 GHz1Delta 1 [T1 ] -0.37 dB 942.307692319 kHzD1 -2.31 dBmD2 -22.31 dBmDate: 26.JUN.2019 10:41:04 Pi/4DQPSK Modulation Report No.: TCT190605E005 Lowest channel Middle channel Highest channel Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 22 of 68 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH250 kHz/Center2.402 GHzSpan2.5 MHz**3DBRBW 30 kHzVBW 100 kHzSWT 15 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -21.20 dBm 2.401366250 GHz1Delta 1 [T1 ] -0.68 dB 1.254006410 MHzD1 -1.57 dBmD2 -21.57 dBmDate: 26.JUN.2019 10:42:07 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH250 kHz/Center2.441 GHzSpan2.5 MHz**3DBRBW 30 kHzVBW 100 kHzSWT 15 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -22.49 dBm 2.440363750 GHz1Delta 1 [T1 ] -0.47 dB 1.258012821 MHzD1 -2.36 dBmD2 -22.36 dBmDate: 26.JUN.2019 10:43:02 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH250 kHz/Center2.48 GHzSpan2.5 MHz**3DBRBW 30 kHzVBW 100 kHzSWT 15 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -23.91 dBm 2.479362244 GHz1Delta 1 [T1 ] 0.65 dB 1.258012821 MHzD1 -3.15 dBmD2 -23.15 dBmDate: 26.JUN.2019 10:43:58 8DPSK Modulation Report No.: TCT190605E005 Lowest channel Middle channel Highest channel Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 23 of 68 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH250 kHz/Center2.402 GHzSpan2.5 MHz**3DBRBW 30 kHzVBW 100 kHzSWT 15 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -22.80 dBm 2.401371763 GHz1Delta 1 [T1 ] -0.08 dB 1.258012821 MHzD1 -2.92 dBmD2 -22.92 dBmDate: 26.JUN.2019 10:45:15 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH250 kHz/Center2.441 GHzSpan2.5 MHz**3DBRBW 30 kHzVBW 100 kHzSWT 15 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -23.55 dBm 2.440371763 GHz1Delta 1 [T1 ] -0.24 dB 1.258012821 MHzD1 -3.73 dBmD2 -23.73 dBmDate: 26.JUN.2019 10:46:04 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH250 kHz/Center2.48 GHzSpan2.5 MHz**3DBRBW 30 kHzVBW 100 kHzSWT 15 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -24.44 dBm 2.479366250 GHz1Delta 1 [T1 ] -0.43 dB 1.266025641 MHzD1 -4.5 dBmD2 -24.5 dBmDate: 26.JUN.2019 10:47:09 Report No.: TCT190605E005 6.5. Carrier Frequencies Separation 6.5.1. Test Specification Test Requirement:

FCC Part15 C Section 15.247 (a)(1) Test Method:

KDB 558074 D01 v05r02 Frequency hopping systems shall have hopping channel carrier frequencies separated by a minimum of 25 kHz or the 20 dB bandwidth of the hopping channel, whichever is greater. Alternatively, frequency hopping systems operating in the 2400-2483.5 MHz band may have hopping channel carrier frequencies that are separated by 25 kHz or two-thirds of the 20 dB bandwidth of the hopping channel, whichever is greater, provided the systems operate with an output power no greater than 125 mW. Limit:

Test Setup:

Test Mode:

Hopping mode Test Procedure:

Span = wide enough to capture the peaks of two adjacent channels; RBW is set to approximately 10%

of the channel spacingl; VBWRBW; Sweep = auto;

Detector function = peak; Trace = max hold. 5. Use the marker-delta function to determine the separation between the peaks of the adjacent channels. Record the value in report. Test Result:

PASS 6.5.2. Test Instruments Equipment Manufacturer Model Serial Number Calibration Due Spectrum Analyzer R&S FSU 200054 Sep. 20, 2019 RF Cable

(9KHz-26.5GHz) TCT RE-06 Antenna Connector TCT RFC-01 N/A N/A Sep. 20, 2019 Sep. 20, 2019 Note: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to international system unit (SI). Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 24 of 68 6.5.3. Test data Report No.: TCT190605E005 GFSK mode Test channel Carrier Frequencies Separation (kHz) Limit (kHz) Lowest Middle Highest 998 1000 1006 945.51 945.51 945.51 Pi/4 DQPSK mode Test channel Carrier Frequencies Separation (kHz) Limit (kHz) Lowest Middle Highest 1000 998 1002 838.67 838.67 838.67 8DPSK mode Test channel Carrier Frequencies Separation (kHz) Limit (kHz) Lowest Middle Highest 1004 1002 998 844.02 844.02 844.02 Result PASS PASS PASS Result PASS PASS PASS Result PASS PASS PASS Note: According to section 6.4 Mode GFSK

/4-DQPSK 8DPSK Test plots as follows:

20dB bandwidth (kHz)

(worse case) Limit (kHz)

(Carrier Frequencies Separation) 945.51 1258.01 1266.03 945.51 838.67 844.02 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 25 of 68 GFSK Modulation Report No.: TCT190605E005 Lowest channel Middle channel Highest channel Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 26 of 68 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH200 kHz/Center2.4025 GHzSpan2 MHz**3DBRBW 100 kHzVBW 300 kHzSWT 5 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] 1.14 dBm 2.401840000 GHz1Delta 1 [T1 ] -0.01 dB 998.000000000 kHzDate: 26.JUN.2019 10:56:32 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH200 kHz/Center2.4415 GHzSpan2 MHz**3DBRBW 100 kHzVBW 300 kHzSWT 5 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] 0.29 dBm 2.440836000 GHz1Delta 1 [T1 ] -0.02 dB 1.000000000 MHzDate: 26.JUN.2019 10:57:34 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH200 kHz/Center2.4795 GHzSpan2 MHz**3DBRBW 100 kHzVBW 300 kHzSWT 5 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -0.44 dBm 2.478830000 GHz1Delta 1 [T1 ] 0.04 dB 1.006000000 MHzDate: 26.JUN.2019 10:59:01 Pi/4DQPSK Modulation Report No.: TCT190605E005 Lowest channel Middle channel Highest channel Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 27 of 68 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH200 kHz/Center2.4025 GHzSpan2 MHz**3DBRBW 100 kHzVBW 300 kHzSWT 5 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] 0.32 dBm 2.401836000 GHz1Delta 1 [T1 ] -0.01 dB 1.000000000 MHzDate: 26.JUN.2019 11:00:36 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH200 kHz/Center2.4415 GHzSpan2 MHz**3DBRBW 100 kHzVBW 300 kHzSWT 5 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -0.47 dBm 2.440838000 GHz1Delta 1 [T1 ] -0.04 dB 998.000000000 kHzDate: 26.JUN.2019 11:01:48 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH200 kHz/Center2.4795 GHzSpan2 MHz**3DBRBW 100 kHzVBW 300 kHzSWT 5 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -1.24 dBm 2.478836000 GHz1Delta 1 [T1 ] -0.01 dB 1.002000000 MHzDate: 26.JUN.2019 11:03:26 8DPSK Modulation Report No.: TCT190605E005 Lowest channel Middle channel Highest channel Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 28 of 68 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH200 kHz/Center2.4025 GHzSpan2 MHz**3DBRBW 100 kHzVBW 300 kHzSWT 5 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] 0.35 dBm 2.401834000 GHz1Delta 1 [T1 ] -0.01 dB 1.004000000 MHzDate: 26.JUN.2019 11:05:01 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH200 kHz/Center2.4415 GHzSpan2 MHz**3DBRBW 100 kHzVBW 300 kHzSWT 5 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -0.48 dBm 2.440834000 GHz1Delta 1 [T1 ] -0.01 dB 1.002000000 MHzDate: 26.JUN.2019 11:06:21 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH200 kHz/Center2.4795 GHzSpan2 MHz**3DBRBW 100 kHzVBW 300 kHzSWT 5 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -1.24 dBm 2.478838000 GHz1Delta 1 [T1 ] -0.01 dB 998.000000000 kHzDate: 26.JUN.2019 11:08:01 Report No.: TCT190605E005 6.6. Hopping Channel Number 6.6.1. Test Specification Test Requirement:

FCC Part15 C Section 15.247 (a)(1) Test Method:

KDB 558074 D01 v05r02 Limit:

Test Setup:

Frequency hopping systems in the 2400-2483.5 MHz band shall use at least 15 channels. Test Mode:

Hopping mode Test Procedure:

1. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 2. Set to the maximum power setting and enable the EUT transmit continuously. 3. Enable the EUT hopping function. 4. Use the following spectrum analyzer settings: Span =

the frequency band of operation; set the RBW to 10%

of the channel spacing; VBWRBW; Sweep = auto;

Detector function = peak; Trace = max hold. 5. The number of hopping frequency used is defined as the number of total channel. 6. Record the measurement data in report. Test Result:

PASS 6.6.2. Test Instruments Equipment Manufacturer Model Serial Number Calibration Due Spectrum Analyzer R&S FSU 200054 Sep. 20, 2019 RF Cable

Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 30 of 68 Report No.: TCT190605E005 GFSK Pi/4DQPSK 8DPSK Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 31 of 68 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm 1 PKMAXH8.35 MHz/Start2.4 GHzStop2.4835 GHz**3DBRBW 100 kHzVBW 300 kHzSWT 10 ms-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] 0.79 dBm 2.401819872 GHz1Delta 1 [T1 ] -1.48 dB 78.415064103 MHzDate: 26.JUN.2019 11:11:13 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm8.35 MHz/Start2.4 GHzStop2.4835 GHz**3DBRBW 100 kHzVBW 300 kHzSWT 10 ms 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] 0.00 dBm 2.402036115 GHz1Delta 1 [T1 ] -1.44 dB 78.013621795 MHzDate: 26.JUN.2019 11:15:48 A Att 20 dB*Offset 0.5 dBLVLRef 20 dBm8.35 MHz/Start2.4 GHzStop2.4835 GHz**3DBRBW 100 kHzVBW 300 kHzSWT 10 ms 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -1.24 dBm 2.401837000 GHz1Delta 1 [T1 ] 0.02 dB 78.075711538 MHzDate: 26.JUN.2019 11:18:06 Report No.: TCT190605E005 6.7. Dwell Time 6.7.1. Test Specification Test Requirement:

FCC Part15 C Section 15.247 (a)(1) Test Method:

KDB 558074 D01 v05r02 Limit:

Test Setup:

The average time of occupancy on any channel shall not be greater than 0.4 seconds within a period of 0.4 seconds multiplied by the number of hopping channels employed. Test Mode:

Hopping mode Test Procedure:

1. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 2. Set to the maximum power setting and enable the EUT transmit continuously. 3. Enable the EUT hopping function. 4. Use the following spectrum analyzer settings: Span =

zero span, centered on a hopping channel; RBW shall be channel spacing and where possible RBW should be set >> 1 / T, where T is the expected dwell time per channel; VBWRBW; Sweep = as necessary to capture the entire dwell time per hopping channel; Detector function = peak; Trace =

max hold. 5. Measure and record the results in the test report. Test Result:

PASS 6.7.2. Test Instruments Equipment Manufacturer Model Serial Number Calibration Due Spectrum Analyzer R&S FSU 200054 Sep. 20, 2019 RF Cable

(second) Limit

(second) Result Pi/4 DQPSK Pi/4 DQPSK Pi/4 DQPSK GFSK DH1 GFSK DH3 320 160 GFSK DH5 106.67 2-DH1 320 0.388 1.652 2.908 0.394 0.124 0.264 0.310 0.126 2-DH3 160 1.655 0.265 2-DH5 106.67 8DPSK 3-DH1 8DPSK 3-DH3 320 160 8DPSK 3-DH5 106.67 2.902 0.396 1.654 2.910 0.310 0.127 0.265 0.310 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 PASS PASS PASS PASS PASS PASS PASS PASS PASS Note: 1. In normal mode, hopping rate is 1600 hops/s with 6 slots in 79 hopping channels. For DH1, With channel hopping rate (1600 / 2 / 79) in Occupancy Time Limit (0.4 x 79) (s), Hops Over Occupancy Time comes to (1600 / 2 / 79) x (0.4 x 79) = 320 hops For DH3, With channel hopping rate (1600 / 4 / 79) in Occupancy Time Limit (0.4 x 79) (s), Hops Over Occupancy Time comes to (1600 / 4 / 79) x (0.4 x 79) = 160 hops For DH5, With channel hopping rate (1600 / 6 / 79) in Occupancy Time Limit (0.4 x 79) (s), Hops Over Occupancy Time comes to (1600 / 6 / 79) x (0.4 x 79) = 106.67 hops 2. Dwell Time(s) = Hops Over Occupancy Time (hops) x Package Transfer Time Test plots as follows:

Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 33 of 68 Report No.: TCT190605E005 GFSK DH1 DH3 DH5 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 34 of 68 Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dBCLRWRCenter 2.402 GHz100 s/3DBRBW 1 MHzSWT 1 ms*VBW 1 MHzSGL 1 AP-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -61.75 dBm 284.589744 s 1Delta 1 [T1 ] 0.65 dB 387.820513 s Date: 26.JUN.2019 11:19:24Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dBCLRWR3DBRBW 1 MHz*VBW 1 MHzSGLCenter 2.402 GHz300 s/SWT 3 ms 1 AP-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -60.46 dBm 503.384615 s 1Delta 1 [T1 ] -2.84 dB 1.651846 ms Date: 26.JUN.2019 11:20:27Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dBCLRWR3DBRBW 1 MHz*VBW 1 MHzSGLCenter 2.402 GHz400 s/SWT 4 ms 1 AP-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -63.31 dBm 349.538462 s 1Delta 1 [T1 ] 1.17 dB 2.908359 ms Date: 26.JUN.2019 11:21:08 Report No.: TCT190605E005 Pi/4DQPSK 2-DH1 2-DH3 2-DH5 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 35 of 68 Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dBCLRWR3DBRBW 1 MHz*VBW 1 MHzSGLCenter 2.402 GHz100 s/SWT 1 ms 1 AP-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -63.71 dBm 289.589744 s 1Delta 1 [T1 ] 0.18 dB 394.230769 s Date: 26.JUN.2019 11:21:41Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dBCLRWR3DBRBW 1 MHz*VBW 1 MHzSGLCenter 2.402 GHz300 s/SWT 3 ms 1 AP-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -60.87 dBm 596.384615 s 1Delta 1 [T1 ] -2.52 dB 1.655269 ms Date: 26.JUN.2019 11:22:15Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dBCLRWR3DBRBW 1 MHz*VBW 1 MHzSGLCenter 2.402 GHz400 s/SWT 4 ms 1 AP-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -60.66 dBm 769.461538 s 1Delta 1 [T1 ] -2.79 dB 2.902026 ms Date: 26.JUN.2019 11:22:49 Report No.: TCT190605E005 8DPSK 3-DH1 3-DH3 3-DH5 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 36 of 68 Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dBCLRWR3DBRBW 1 MHz*VBW 1 MHzSGLCenter 2.402 GHz100 s/SWT 1 ms 1 AP-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -58.62 dBm 318.987179 s 1Delta 1 [T1 ] -3.86 dB 395.833333 s Date: 26.JUN.2019 11:23:26Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dBCLRWR3DBRBW 1 MHz*VBW 1 MHzSGLCenter 2.402 GHz300 s/SWT 3 ms 1 AP-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -62.05 dBm 515.384615 s 1Delta 1 [T1 ] 1.30 dB 1.654192 ms Date: 26.JUN.2019 11:24:01Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dBCLRWR3DBRBW 1 MHz*VBW 1 MHzSGLCenter 2.402 GHz400 s/SWT 4 ms 1 AP-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -59.19 dBm 523.179487 s 1Delta 1 [T1 ] -2.60 dB 2.910205 ms Date: 26.JUN.2019 11:24:31 Report No.: TCT190605E005 6.8. Pseudorandom Frequency Hopping Sequence Test Requirement:

FCC Part15 C Section 15.247 (a)(1) requirement:

Frequency hopping systems shall have hopping channel carrier frequencies separated by a minimum of 25 kHz or the 20 dB bandwidth of the hopping channel, whichever is greater. Alternatively. Frequency hopping systems operating in the 2400-2483.5 MHz band may have hopping channel carrier frequencies that are separated by 25 kHz or two-thirds of the 20 dB bandwidth of the hopping channel, whichever is greater, provided the systems operate with an output power no greater than 125 mW. The system shall hop to channel frequencies that are selected at the system hopping rate from a Pseudorandom ordered list of hopping frequencies. Each frequency must be used equally on the average by each transmitter. The system receivers shall have input bandwidths that match the hopping channel bandwidths of their corresponding transmitters and shall shift frequencies in synchronization with the transmitted signals. EUT Pseudorandom Frequency Hopping Sequence The pseudorandom sequence may be generated in a nine-stage shift register whose 5th and 9th stage outputs are added in a modulo-two addition stage. And the result is fed back to the input of the first stage. The sequence begins with the first one of 9 consecutive ones; i.e. the shift register is initialized with nine ones. Number of shift register stages: 9 Length of pseudo-random sequence: 29 -1 = 511 bits Longest sequence of zeros: 8 (non-inverted signal) An example of Pseudorandom Frequency Hopping Sequence as follow:

Each frequency used equally on the average by each transmitter. The system receivers have input bandwidths that match the hopping channel bandwidths of their corresponding transmitters and shift frequencies in synchronization with the transmitted signals. Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 37 of 68 Report No.: TCT190605E005 6.9. Conducted Band Edge Measurement 6.9.1. Test Specification Test Requirement:

FCC Part15 C Section 15.247 (d) Test Method:

KDB 558074 D01 v05r02 In any 100 kHz bandwidth outside the intentional radiation frequency band, the radio frequency power shall be at least 20 dB below the highest level of the radiated power. In addition, radiated emissions which fall in the restricted bands must also comply with the radiated emission limits. Limit:

Test Setup:

Test Mode:

Transmitting mode with modulation Test Procedure:

1. Set to the maximum power setting and enable the EUT transmit continuously. 2. Set RBW = 100 kHz (1% span=10MHz), VBW = 300 kHz (RBW). Band edge emissions must be at least 20 dB down from the highest emission level within the authorized band as measured with a 100kHz RBW. The attenuation shall be 30 dB instead of 20 dB when RMS conducted output power procedure is used. 3. Enable hopping function of the EUT and then repeat step 2 and 3. 4. Measure and record the results in the test report. Test Result:

PASS 6.9.2. Test Instruments Equipment Manufacturer Model Serial Number Calibration Due Spectrum Analyzer R&S FSU 200054 Sep. 20, 2019 RF Cable

Lowest channel No-hopping mode Hopping mode Test channel:

Highest channel No-hopping mode Hopping mode Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 39 of 68 Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB9.5 MHz/Start2.31 GHzStop2.405 GHz*3DBRBW 100 kHzSWT 10 ms*VBW 300 kHz 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -56.66 dBm 2.382770000 GHz2Marker 2 [T1 ] -59.27 dBm 2.390000000 GHz3Marker 3 [T1 ] -56.75 dBm 2.400000000 GHzD1 1.3 dBmD2 -18.7 dBmF1F2Date: 26.JUN.2019 11:36:06Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB9.5 MHz/Start2.31 GHzStop2.405 GHz*3DBRBW 100 kHzSWT 10 ms*VBW 300 kHz 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -56.31 dBm 2.365860000 GHz2Marker 2 [T1 ] -58.45 dBm 2.390000000 GHz3Marker 3 [T1 ] -60.18 dBm 2.400000000 GHzF1F2D1 1.18 dBmD2 -18.82 dBmDate: 26.JUN.2019 11:38:12Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB2.8 MHz/Start2.477 GHzStop2.505 GHz**3DBRBW 100 kHzVBW 300 kHzSWT 10 ms 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -57.70 dBm 2.483500000 GHz2Marker 2 [T1 ] -57.70 dBm 2.483500000 GHz3Marker 3 [T1 ] -60.76 dBm 2.500000000 GHzF1F2D1 -0.47 dBmD2 -20.47 dBmDate: 26.JUN.2019 11:48:26Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB2.8 MHz/Start2.477 GHzStop2.505 GHz**3DBRBW 100 kHzVBW 300 kHzSWT 10 ms 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -57.63 dBm 2.486733949 GHz2Marker 2 [T1 ] -58.99 dBm 2.483500000 GHz3Marker 3 [T1 ] -60.14 dBm 2.500000000 GHzF1F2D1 -0.56 dBmD2 -20.56 dBmDate: 26.JUN.2019 11:50:40 Report No.: TCT190605E005 Pi/4DQPSK Modulation Test channel:

Lowest channel No-hopping mode Hopping mode Test channel:

Highest channel No-hopping mode Hopping mode Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 40 of 68 Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB9.5 MHz/Start2.31 GHzStop2.405 GHz*3DBRBW 100 kHzSWT 10 ms*VBW 300 kHz 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -51.94 dBm 2.399581346 GHz2Marker 2 [T1 ] -58.91 dBm 2.390000000 GHz3Marker 3 [T1 ] -53.44 dBm 2.400000000 GHzF1F2D1 0.3 dBmD2 -19.7 dBmDate: 26.JUN.2019 11:39:08Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB9.5 MHz/Start2.31 GHzStop2.405 GHz*3DBRBW 100 kHzSWT 10 ms*VBW 300 kHz 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -53.04 dBm 2.399585000 GHz2Marker 2 [T1 ] -59.19 dBm 2.390000000 GHz3Marker 3 [T1 ] -53.96 dBm 2.400000000 GHzF1F2D1 0.18 dBmD2 -19.82 dBmDate: 26.JUN.2019 11:42:52Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB2.8 MHz/Start2.477 GHzStop2.505 GHz**3DBRBW 100 kHzVBW 300 kHzSWT 10 ms 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -57.94 dBm 2.487075692 GHz2Marker 2 [T1 ] -60.05 dBm 2.483500000 GHz3Marker 3 [T1 ] -60.94 dBm 2.500000000 GHzF1F2D1 -1.24 dBmD2 -21.24 dBmDate: 26.JUN.2019 11:51:37Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB2.8 MHz/Start2.477 GHzStop2.505 GHz**3DBRBW 100 kHzVBW 300 kHzSWT 10 ms 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -56.94 dBm 2.485892872 GHz2Marker 2 [T1 ] -59.65 dBm 2.483500000 GHz3Marker 3 [T1 ] -60.18 dBm 2.500000000 GHzF1F2D1 -1.69 dBmD2 -21.69 dBmDate: 26.JUN.2019 11:53:49 8DPSK Modulation Test channel:

Report No.: TCT190605E005 Lowest channel No-hopping mode Hopping mode Test channel:

Highest channel No-hopping mode Hopping mode Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 41 of 68 Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB9.5 MHz/Start2.31 GHzStop2.405 GHz*3DBRBW 100 kHzSWT 10 ms*VBW 300 kHz 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -50.13 dBm 2.399581346 GHz2Marker 2 [T1 ] -60.01 dBm 2.390000000 GHz3Marker 3 [T1 ] -52.94 dBm 2.400000000 GHzF1F2D1 0.42 dBmD2 -19.58 dBmDate: 26.JUN.2019 11:44:15Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB9.5 MHz/Start2.31 GHzStop2.405 GHz*3DBRBW 100 kHzSWT 10 ms*VBW 300 kHz 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -55.10 dBm 2.399680000 GHz2Marker 2 [T1 ] -59.48 dBm 2.390000000 GHz3Marker 3 [T1 ] -59.56 dBm 2.400000000 GHzF1F2D1 -0.2 dBmD2 -20.2 dBmDate: 26.JUN.2019 11:46:14Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB2.8 MHz/Start2.477 GHzStop2.505 GHz**3DBRBW 100 kHzVBW 300 kHzSWT 10 ms 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -57.70 dBm 2.487416000 GHz2Marker 2 [T1 ] -59.65 dBm 2.483500000 GHz3Marker 3 [T1 ] -60.27 dBm 2.500000000 GHzF1F2D1 -1.35 dBmD2 -21.35 dBmDate: 26.JUN.2019 11:54:51Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB2.8 MHz/Start2.477 GHzStop2.505 GHz**3DBRBW 100 kHzVBW 300 kHzSWT 10 ms 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -57.56 dBm 2.499344000 GHz2Marker 2 [T1 ] -59.78 dBm 2.483500000 GHz3Marker 3 [T1 ] -60.01 dBm 2.500000000 GHzF1F2D1 -1.97 dBmD2 -21.97 dBmDate: 26.JUN.2019 11:56:54 Report No.: TCT190605E005 6.10. Conducted Spurious Emission Measurement 6.10.1. Test Specification Test Requirement:

FCC Part15 C Section 15.247 (d) Test Method:

Test Setup:

Test Mode:

Transmitting mode with modulation Test Procedure:

1. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 2. Set to the maximum power setting and enable the EUT transmit continuously. 3. Set RBW = 100 kHz, VBW = 300kHz, scan up through 10th harmonic. All harmonics / spurs must be at least 20 dB down from the highest emission level within the authorized band as measured with a 100 kHz RBW. 4. Measure and record the results in the test report. 5. The RF fundamental frequency should be excluded against the limit line in the operating frequency band. Test Result:

PASS 6.10.2. Test Instruments Equipment Manufacturer Model Serial Number Calibration Due Spectrum Analyzer R&S FSU 200054 Sep. 20, 2019 Spectrum Analyzer RF Cable

(9KHz-26.5GHz) ROHDE&SCH WARZ TCT Antenna Connector TCT RFC-01 FSQ40 200061 Sep. 20, 2019 RE-06 N/A N/A Sep. 20, 2019 Sep. 20, 2019 Note: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to international system unit (SI). Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 42 of 68 6.10.3. Test Data Report No.: TCT190605E005 GFSK mode Lowest Channel Middle Channel Highest Channel Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 43 of 68 Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB*3DBRBW 100 kHzSWT 2.5 s*VBW 300 kHzStart30 MHzStop25 GHz2.497 GHz/ 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] 0.29 dBm 2.402150000 GHz2Marker 2 [T1 ] -53.71 dBm 9.607243500 GHzD1 -19.71 dBmDate: 27.JUN.2019 15:17:44Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB*3DBRBW 100 kHzSWT 2.5 s*VBW 300 kHzCenter12.515 GHzSpan24.97 GHz2.497 GHz/ 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] 0.72 dBm 2.440853500 GHz2Marker 2 [T1 ] -54.75 dBm 9.764554500 GHzD1 -19.28 dBmDate: 27.JUN.2019 15:18:57Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB*3DBRBW 100 kHzSWT 2.5 s*VBW 300 kHzCenter12.515 GHzSpan24.97 GHz2.497 GHz/ 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -0.98 dBm 2.479557000 GHz2Marker 2 [T1 ] -53.29 dBm 9.919368500 GHzD1 -20.98 dBmDate: 27.JUN.2019 15:21:12 Report No.: TCT190605E005 Pi/4DQPSK mode Lowest Channel Middle Channel Highest Channel Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 44 of 68 Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB*3DBRBW 100 kHzSWT 2.5 s*VBW 300 kHzCenter12.515 GHzSpan24.97 GHz2.497 GHz/ 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -0.28 dBm 2.402150000 GHz2Marker 2 [T1 ] -56.25 dBm 9.607243500 GHzD1 -20.28 dBmDate: 27.JUN.2019 15:25:22Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB*3DBRBW 100 kHzSWT 2.5 s*VBW 300 kHzCenter12.515 GHzSpan24.97 GHz2.497 GHz/ 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -0.22 dBm 2.440853500 GHz2Marker 2 [T1 ] -53.63 dBm 9.764554500 GHzD1 -20.22 dBmDate: 27.JUN.2019 15:27:15Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB*3DBRBW 100 kHzSWT 2.5 s*VBW 300 kHzCenter12.515 GHzSpan24.97 GHz2.497 GHz/ 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -1.05 dBm 2.479557000 GHz2Marker 2 [T1 ] -53.63 dBm 9.919368500 GHzD1 -21.05 dBmDate: 27.JUN.2019 15:31:31 Report No.: TCT190605E005 8DPSK mode Lowest Channel Middle Channel Highest Channel Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 45 of 68 Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB*3DBRBW 100 kHzSWT 2.5 s*VBW 300 kHzCenter12.515 GHzSpan24.97 GHz2.497 GHz/ 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -0.64 dBm 2.402150000 GHz2Marker 2 [T1 ] -56.79 dBm 9.607243500 GHzD1 -20.64 dBmDate: 27.JUN.2019 15:32:26Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB*3DBRBW 100 kHzSWT 2.5 s*VBW 300 kHzCenter12.515 GHzSpan24.97 GHz2.497 GHz/ 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -1.91 dBm 2.440853500 GHz2Marker 2 [T1 ] -53.69 dBm 9.763306000 GHzD1 -21.91 dBmDate: 27.JUN.2019 15:34:44Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dB*3DBRBW 100 kHzSWT 2.5 s*VBW 300 kHzCenter12.515 GHzSpan24.97 GHz2.497 GHz/ 1 PKMAXH-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -0.85 dBm 2.479557000 GHz2Marker 2 [T1 ] -53.56 dBm 9.919368500 GHzD1 -20.85 dBmDate: 27.JUN.2019 15:35:48 Report No.: TCT190605E005 6.11. Radiated Spurious Emission Measurement 6.11.1. Test Specification Test Requirement:

FCC Part15 C Section 15.209 Test Method:

ANSI C63.10:2013 Frequency Range:

9 kHz to 25 GHz Measurement Distance:

3 m Antenna Polarization:

Horizontal & Vertical Receiver Setup:

Frequency Detector 9kHz- 150kHz Quasi-peak Quasi-peak 150kHz-

30MHz RBW 200Hz 9kHz Remark VBW 1kHz Quasi-peak Value 30kHz Quasi-peak Value 30MHz-1GHz Quasi-peak 120KHz Above 1GHz Peak Peak 1MHz 1MHz 300KHz Quasi-peak Value 3MHz 10Hz Average Value Peak Value Frequency 0.009-0.490 0.490-1.705 1.705-30 30-88 88-216 216-960 Above 960 Field Strength Measurement

(microvolts/meter) Distance (meters) 2400/F(KHz) 24000/F(KHz) 30 100 150 200 500 300 30 30 3 3 3 3 Frequency Field Strength

(microvolts/meter) Measurement Distance

(meters) Above 1GHz 500 5000 3 3 Detector Average Peak For radiated emissions below 30MHz Limit:

Test setup:

Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 46 of 68 Report No.: TCT190605E005 30MHz to 1GHz Above 1GHz Test Mode:

Transmitting mode with modulation Test Procedure:

1. The testing follows the guidelines in Spurious Radiated Emissions of ANSI C63.10:2013 Measurement Guidelines. 2. For the radiated emission test below 1GHz:

The EUT was placed on a turntable with 0.8 meter above ground. The EUT was set 3 meters from the interference receiving antenna, which was mounted on the top of a variable height antenna tower. The EUT was arranged to its worst case and then tune the antenna tower (from 1 m to 4 m) and turntable

(from 0 degree to 360 degrees) to find the maximum reading. A pre-amp and a high PASS filter are used for the test in order to get better signal level. For the radiated emission test above 1GHz:

Place the measurement antenna on a turntable with 1.5 meter above ground, which is away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. The measurement antenna may have to be higher or lower than the EUT, Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 47 of 68 Report No.: TCT190605E005 depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. The final measurement antenna elevation shall be that which maximizes the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane. 3. Set to the maximum power setting and enable the EUT transmit continuously. 4. Use the following spectrum analyzer settings:

(1) Span shall wide enough to fully capture the emission being measured;

(2) Set RBW=120 kHz for f < 1 GHz, RBW=1MHz for f>1GHz ; VBWRBW;

Sweep = auto; Detector function = peak; Trace

= max hold for peak

(3) For average measurement: use duty cycle correction factor method per 15.35(c). Duty cycle = On time/100 milliseconds On time =N1*L1+N2*L2+...+Nn-1*LNn-1+Nn*Ln Where N1 is number of type 1 pulses, L1 is length of type 1 pulses, etc. Average Emission Level = Peak Emission Level + 20*log(Duty cycle) Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor = Level Test results:

PASS Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 48 of 68 Report No.: TCT190605E005 6.11.2. Test Instruments Name of Equipment Test Receiver Spectrum Analyzer Radiated Emission Test Site (966) Manufacturer Model Serial Number Calibration Due ROHDE&SCHW ARZ ROHDE&SCHW ARZ EM Electronics ESIB7 100197 Sep. 17, 2019 FSQ40 200061 Sep. 20, 2019 Pre-amplifier Corporation EM30265 07032613 Sep. 16, 2019 CO.,LTD Pre-amplifier HP 8447D 2727A05017 Sep. 16, 2019 Loop antenna ZHINAN ZN30900A 12024 Oct. 20, 2019 Broadband Antenna Schwarzbeck VULB9163 Horn Antenna Schwarzbeck BBHA 9120D 340 631 Sep. 02, 2019 Oct. 20, 2019 Horn Antenna A-INFO LB-180400-KF J211020657 Sep. 16, 2019 Antenna Mast Keleto RE-AM TCT RE-low-01 N/A N/A N/A Sep. 16, 2019 Coax cable

(9KHz-1GHz) Coax cable

(9KHz-40GHz) Coax cable

(9KHz-1GHz) Coax cable

(9KHz-40GHz) TCT RE-high-02 N/A Sep. 16, 2019 TCT RE-low-03 N/A Sep. 16, 2019 TCT RE-high-04 N/A Sep. 16, 2019 EMI Test Software Shurple Technology EZ-EMC N/A N/A Note: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to international system unit (SI). Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 49 of 68 Report No.: TCT190605E005 6.11.3. Test Data Duty cycle correction factor for average measurement 3DH5 on time (One Pulse) Plot on Channel 00 3DH5 on time (Count Pulses) Plot on Channel 00 Note:

1. Worst case Duty cycle = on time/100 milliseconds = (2.910*26+2.304)/100= 0.7796 2. Worst case Duty cycle correction factor = 20*log (Duty cycle) = -2.16dB 3. 3DH5 has the highest duty cycle worst case and is reported. 4. The average levels were calculated from the peak level corrected with duty cycle correction factor (-2.16dB) derived from 20log (dwell time/100ms). This correction is only for signals that hop with the fundamental signal, such as band-edge and harmonic. Other spurious signals that are independent of the hopping signal would not use this correction. Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 50 of 68 Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dBCLRWR3DBRBW 1 MHz*VBW 1 MHzSGLCenter 2.402 GHz400 s/SWT 4 ms 1 AP-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] -59.19 dBm 523.179487 s 1Delta 1 [T1 ] -2.60 dB 2.910205 ms Date: 26.JUN.2019 11:24:31Ref 20 dBm*Offset 0.5 dB A LVLAtt 20 dBCLRWR3DBRBW 1 MHz*VBW 1 MHzSGLCenter 2.402 GHz10 ms/SWT 100 ms 1 AP-80-70-60-50-40-30-20-10010201Marker 1 [T1 ] 0.73 dBm 97.696154 ms 1Delta 1 [T1 ] -0.22 dB 2.303846 ms Date: 26.JUN.2019 11:25:10 Report No.: TCT190605E005 Please refer to following diagram for individual Below 1GHz Horizontal:

Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 51 of 68 Vertical:

Report No.: TCT190605E005 Note: 1.The low frequency, which started from 9KHz~30MHz, was pre-scanned and the result which was 20dB lower than the limit line per 15.31(o) was not reported 2. Measurements were conducted in all three channels (high, middle, low) and three modulation (GFSK, Pi/4DQPSK, 8DPSK) and the worst case Mode (Lowest channel and GFSK) was submitted only. Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 52 of 68 Report No.: TCT190605E005 Above 1GHz Modulation Type: GFSK Low channel: 2402 MHz Frequency Ant. Pol.

(MHz) H/V 2390 4804 7206

---

2390 4804 7206

---

H H H H V V V V Peak reading

(dBV) 45.51 50.02 39.88

---

45.96 46.23 40.37

---

Middle channel: 2441 MHz Peak Frequency Ant. Pol.

(MHz) H/V 4882 7323

---

4882 7323

---

H H H V V V reading

(dBV) 45.17 39.33

---

45.22 40.33

---

High channel: 2480 MHz Frequency Ant. Pol.

(MHz) H/V 2483.5 4960 7440

---

2483.5 4960 7440

---

H H H H V V V V Peak reading

(dBV) 47.26 49.89 41.95

---

48.55 50.00 39.05

---

AV Correction reading

(dBuV)

---

Factor

(dB/m)

-8.27 0.66 9.50

---

-8.27 0.66 9.50

---

Emission Level AV Peak

(dBV/m)

(dBV/m) Peak limit

(dBV/m) AV limit

(dBV/m) Margin

(dB) 37.24 50.68 49.38

---

37.69 46.89 49.87

---

74 74 74

---

74 74 74

---

54 54 54

---

54 54 54

---

-16.76

-3.32

-4.62

---

-16.31

-7.11

-4.13

---

AV Correction reading

(dBV) Factor

(dB/m) Emission Level Peak AV

(dBV/m)

(dBV/m) Peak limit

(dBV/m) AV limit

(dBV/m) Margin

(dB)

---

0.99 9.87

---

0.99 9.87

---

46.16 49.2

---

46.21 50.2

---

----

74 74

---

74 74

---

54 54

---

54 54

---

-7.84

-4.8

---

-7.79

-3.8

---

AV Correction reading

(dBV)

---

Factor

(dB/m)

-7.83 1.33 10.22

---

-7.83 1.33 10.22

---

Emission Level AV Peak

(dBV/m)

(dBV/m) Peak limit

(dBV/m) AV limit

(dBV/m) Margin

(dB) 39.43 51.22 52.17

---

40.72 51.33 49.27

---

74 74 74

---

74 74 74

---

54 54 54

---

54 54 54

---

-14.57

-2.78

-1.83

---

-13.28

-2.67

-4.73

---

Note:

1. Emission Level=Peak Reading + Correction Factor; Correction Factor= Antenna Factor + Cable loss Pre-amplifier 2. Margin (dB) = Emission Level (Peak) (dBV/m)-Average limit (dBV/m) 3. The emission levels of other frequencies are very lower than the limit and not show in test report. 4. Measurements were conducted from 1 GHz to the 10th harmonic of highest fundamental frequency. 5. Data of measurement shown ---in the above table mean that the reading of emissions is attenuated more than 20 dB below the limits or the field strength is too small to be measured. 6. Measurements were conducted in all three modulation (GFSK, Pi/4DQPSK, 8DPSK), and the worst case Mode

(GFSK) was submitted only. Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 53 of 68 Report No.: TCT190605E005 Appendix A: Photographs of Test Setup Product: Mobile phone Model: SSB5118R Radiated Emission Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 54 of 68 Report No.: TCT190605E005 Conducted Emission Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 55 of 68 Report No.: TCT190605E005 Appendix B: Photographs of EUT Product: Mobile phone Model: SSB5118R External Photos Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 56 of 68 Report No.: TCT190605E005 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 57 of 68 Report No.: TCT190605E005 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 58 of 68 Report No.: TCT190605E005 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 59 of 68 Report No.: TCT190605E005 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 60 of 68 Report No.: TCT190605E005 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 61 of 68 Report No.: TCT190605E005 Product: Mobile phone Model: SSB5118R Internal Photos Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 62 of 68 Report No.: TCT190605E005 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 63 of 68 Report No.: TCT190605E005 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 64 of 68 Report No.: TCT190605E005 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 65 of 68 Report No.: TCT190605E005 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 66 of 68 Report No.: TCT190605E005 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 67 of 68 Report No.: TCT190605E005

*****END OF REPORT*****

Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com Page 68 of 68

Comments

Related Exhibits

Users Manuals

This product uses the FCC Data API but is not endorsed or certified by the FCC