FCC ID: 2AI53-MC613VDRC Lighting Control Switch(Motion Sensor)

Microwave Motion Sensor MC613V D RC Version: A0 SPECIFICATION Product Name: Microwave Motion Sensor Model No.: MC613V D RC Issue Date:

January 30, 2018 CUSTOMER APPROVED PRODUCT DIRECTOR APPROVED SALES CHECKED R&D CHECKED PREPARED Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.com Shenzhen Merrytek Technology Co.,Ltd Page 1 of 8 1. Features Microwave Motion Sensor MC613V D RC Version: A0 1. Built-in motion sensor and daylight sensor for Intelligent control 2. Attachable design ,suitable for more luminaires 3. 1-10v port can match dimmable driver to achieve corridor function 4. Dim+/Dim- to set occupancy light level 5. All sensor Parameters can be set by DIP switch or Remote 6. North American version for linear & batten lights 7. With Ambient learning function 8. 5 years warranty 2. Parameter Input Rated Voltage Stand-by Power Surge Test Working Mode Type of Load Output Load Power Operating Voltage Rage 108-305V AC 50/60Hz 120/277V/347VAC 50/60Hz

< 1W N--L: 1kV ON/OFF function, 0-10V DC dimming Inductive or Resistive Load 120V, 50/60Hz, 3.6A, ballast;

277V, 50/60Hz, 3.4A, ballast;

347V, 50/60Hz, 3.3A, ballast;

Max. Surge Power Dim Interface 0-10V Dimming 50A (50% Ipeak, twidth =500uS, 230V AC full load, cold start);

twidth =200uS, 230V AC, full load, cold start 80A (50% Ipeak,

< 50mA Non-constant source 10%(1.4-1.6V) 20%(1.9-2.1V) 30%(2.9-3.1V) 40% (3.9-4.1V) Operating Frequency 5.8 GHz 75 MHz, ISM Band. Transmitting power 0.5mW Max. Hold time 8S/30S/1min/5min/10min/20min/30min Remote Controller Setup :8S1min/5min/15min/30min Stand-by DIM Level 10%/20%/30%/40%

Sensor Parameters Stand-by Period Detection Area Daylight Sensor Detecting Radius Mounting Height Detecting Angle Remote Controller Setup :10%/20%/30%/40%/50%

0S/1min/3min/5min/10min/30min/+

Remote Controller Setup :0S/1min/5min/30min/+

100%/75%/50%/25%

Remote Controller Setup ; 100%/75%/50%/25%

5lux/15lux/30lux/50lux/100lux/150lux/Disable Remote Controller Setup : 5lux/15lux/50lux/150lux/Disable See note 2 6m Max 150(wall mounting) 360(ceiling mounting) Operating Operating Temperature

-35+70 Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.com Shenzhen Merrytek Technology Co.,Ltd Page 2 of 8 Environment Storage Temperature Temperature: -40+80; Humidity: 85% (non-condensing) Microwave Motion Sensor MC613V D RC Version: A0 Safety standards EN61058-1,EN61058-1-2,UL60730 EMC standards EN55015,EN61547,EN6100,EN301489,EN300440 Certificate Standards Environmental Requirement Compliant to RoHS Certificate CE, RED, UL Wiring Method Copper wire only (10-18AWG) Others Built-in installation (indoor use only) IP Rating Protection Class Installation Dimension Package Net Weight Lifetime IP20 Class II Inch;3.42 220g Bubble bag +Clapboard+ Carton(K=A) 5 years warranty @Ta 230V full load 2. Detection area is effected on volume of motion object and motion speed. The detection area is tested by a 165cm Note 1. N/Ameans not available. height person and walking speed is 0.3m/s. 3. Function 1) ON/OFF function (stand-by period be set to 0s) 2) 2-step dimming function (stand-by period be set to +) Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.com Shenzhen Merrytek Technology Co.,Ltd Page 3 of 8 3) 3-step dimming function (stand-by period be set to 10s/1min/3min/5min/10min/30min) Microwave Motion Sensor MC613V D RC Version: A0 4. Dimension (mm) Main part Detachable sensor head:

5. Wiring 6. Structure a Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.com Shenzhen Merrytek Technology Co.,Ltd Page 4 of 8 Microwave Motion Sensor MC613V D RC Version: A0 7. Detection Pattern Ceiling mounting Ceiling mounted height: 3m Sensitivity: 100%/75%/50%/25%

Ceiling mounted height: 6m Sensitivity: 100%

Normal moving (Speed:1m/s) Normal moving (Speed:1m/s) Slow moving (Speed 0.3m/s) Slow moving (Speed 0.3m/s)

*Only 100% detection sensitivity is workable when installed at 6m mounting height. able to detect motion signal. 8. Remote Control Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.com Shenzhen Merrytek Technology Co.,Ltd Page 5 of 8 Microwave Motion Sensor MC613V D RC Version: A0 9. DIP Switch Setting Detection Area Hold Time Stand-by Period V 1 ON ON

3 ON ON ON

6 ON ON ON

2 ON ON

4 ON ON ON

7 ON ON

ON

100%

75%

50%

25%

5 ON ON ON

ON 8 ON ON ON

ON 8S 30s 1min 5min 10min 15min 30min 0s 1min 3min 5min 10min 30min

Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.com Shenzhen Merrytek Technology Co.,Ltd Page 6 of 8 Stand-by DIM Level Microwave Motion Sensor MC613V D RC Version: A0 Daylight Sensor S1 ON ON

S4 ON ON

ON ON ON ON

S5 ON ON ON ON ON

S3 ON ON ON ON

S2 Stand-by DIM Level 10%

20%

30%

40%

S6 ON ON ON ON ON

Daylight sensor 5Lux 15Lux 30Lux 50lux 100lux 150lux Disable 10. Initialization 1) On/Off function /3-step dimming function:

the initialization, the sensor is not able to detect movement. 2) 2-step dimming function:

After power on, the sensor automatically turns on light at 100% brightness. After 10sec, it turns off the light. During After power on, the sensor automatically turns on light at 100% brightness. After 10sec, it dims the light to a low light level (set by stand-by dim level). During the initialization, the sensor is not able to detect movement. Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.com Shenzhen Merrytek Technology Co.,Ltd Page 7 of 8 Microwave Motion Sensor MC613V D RC Version: A0 Detection area: 100%, Hold time: 8s, Stand-by Period: 0s, Stand-by dim level: 10%, Daylight Sensor: Disable 11. Factory settings 12. Application Notice 1 The sensor should be installed by a professional electrician. Please turn off the power before installing, wiring, changing the setting of the DIP switch. 2The sensor is installed in the plastic, the glass lampshade will reduce the sensitivity of the sensor. For every 3mm increase in thickness, the sensitivity will be reduced by 20%. 3The sensing distance will be affected by the height of the sensor installation, the size of the object being detected, and the speed of movement. 4The light sensitivity threshold is in a sunny environment, no shadow, ambient light diffuse reflection conditions. Ambient lux level could be different under different weather,climate,season or environment 5The parameters of the sensor may need to be reconfigured in different installation environments. Please refer to the following instructions or contact the manufacturer. 6This sensor is for indoor use only. Outdoor use will affect the waterproof effect, and wind and rain, and moving objects around will cause false triggering. 7The distance between any inductive sensors should be greater than 3m. 8When the sensor is installed in a metal luminaire, a metal reflective surface, or a narrow enclosed environment, the microwave will be reflected multiple times and cause false triggering.please reduce the sensitivity or contact 9) Do not place the sensor close to high-density objects such as metal, glass, mixed-use walls, etc. The sensor the manufacturer for technical support. may be triggered by mistake. 10) Please ensure that there are no moving signals around the sensor, such as fan, DC motor, sewer pipe, air outlet, etc., the sensor may generate false trigger. Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.com Shenzhen Merrytek Technology Co.,Ltd Page 8 of 8 FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

connected. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio/TV technician for help.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AI53-MC613VDRC Label and Location Size: L8.6cm*W2.1cm Label Location This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046

<2020-10-26>

TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2AI53-MC613VDRC MC613V D RC For the product stated above, we request that the following information be held confidential;

Model name Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Phone:

Fax:

E-Mail:

Name:

Company: Shenzhen Merrytek Technology Co.,LTD Address:

John Peng/R&D Manager 2nd and 3rd Floor, No.3 building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, China 0755 2305 7253 -233 0755-27863012 kf07@merrytek.com

Add: 2nd and 3rd Floor, No.3 building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, Shenzhen Merrytek Technology Co.,LTD China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

2020/10/26 We, Shenzhen Merrytek Technology Co.,LTD the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AI53-MC613VDRC including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. John Peng/R&D Manager Shenzhen Merrytek Technology Co.,LTD 2nd and 3rd Floor, No.3 building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, China 0755 2305 7253 -233 0755-27863012 kf07@merrytek.com Sincerely, Name:

Company:

Address:

Phone:

Fax:

E-Mail: