Wireless Charger User Manual Model: Super P Thank you for purchasing our products. This manual addresses the safety guidelines, warranty and operating instructions. Please review this manual thoroughly before operating your device. SAFETY AND WARRANTY Important Safety Instructions Using an ultra-thick protective phone case or a case with magnetic/iron plate is not recommended, as it may affect the wireless charging function. Avoid dropping. Do not disassemble. Do not expose to liquids. For the safest and fastest charge, use original or certified cables. The product is suitable for moderate climates only. The maximum ambient temperature during use of the product must not exceed 60C. Naked flame sources, such as candles, must not be placed on the product. If you want to clean the product, use only with dry clothes or a brush. Warranty We strive to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of defect. We are happy to offer a one-year hassle-free warranty to all our products as we continue to make amazing products. Please contact us if you have any questions about our devices. Package Contents 1 Wireless Charger 1 USB-C Charging Cable 1 User Manual At a Glance LED indicator Charging area USB-C input port Using the Wireless Charger 1. Plug the USB-C cable into an AC USB adapter (not included) or a charging USB port. Connect the other end of the USB-C cable to the wireless charger. The indicator will turn red. or 2. Place a supported mobile device in the center of the charging surface. 3. The indicator stays blue. You can check the charging icon displayed on the mobile devices screen for the charging status. 4. When the mobile device is fully charged, remove it from the wireless charger. Notes:
For some Qi-compatible devices, you may need to buy a Qi-compatible receiver (not included) separately to activate the wireless charging function. Do not place foreign materials, such as metal objects, magnets, and magnetic stripe cards, between the mobile device and the wireless charger. The mobile device may not charge properly or may be damaged due to overheating. The wireless charger supports charging through phone cases up to 6mm thick. For the optimal performance, remove your protective phone case and other metal or magnetic objects, and place your phone properly in the wireless charging area. If you connect a charger to the mobile device during wireless charging, the wireless charging feature will be unavailable. The wireless charger supports fast wireless charging. To begin fast wireless charging, place a mobile device that supports fast wireless charging on the wireless charger. Quick charge 2.0 / 3.0 wall adapter (not included) is required for fast wireless charging. LED Indicator Guide LED Indicator Status Indictor stays red When connected to power Indictor stays blue When charging your mobile device Indictor goes off When your mobile device is fully charged Indictor flashes red and blue alternately Foreign object detection/Metal detected between your mobile device and your charger Indictor flashes red Abnormal temperature detected/Overvoltage Indictor flashes red and blue alternately Overcurrent Specifications Model Input Super P 5V/2A, 9V/2A, 12V/1.67A Wireless output 5V/1A, 9V/0.89A, 9V/1.12A, 9V/1.67A Charging distance Charging efficiency 6 mm 65%
Dimensions 100 X 100 X 8.6 mm Working temperature
-10 to 60 FCC ID2AR5E-SUPERP NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.