RADBEACON E4 CUSTOMER LOCATION PLATFORM Ruggedized, weatherproof beacon technology. The RadBeacon E4 is a fully stand-alone Bluetooth 5 proximity beacon that supports iBeaconTM, AltBeaconTM, and EddystoneTM technology. It replaces the X4 in the Radius Networks product line. The RadBeacon E4 is a rugged, weatherproof, and temperature-resistant proximity beacon powered by four AA batteries. It can be installed in any location, regardless of available power and provides proximity advertisements for mobile applications that are compatible with iBeacon, AltBeacon, and Eddystone standards, including the Physical WebTM. HARDWARE Size: 72 x 72 x 23mm Weight: 65g Colors: White Form Factor: Waterproof IP65 Electrical Interface: Quad AA-battery clips Operating Temperature: -40C to 60C (-40F to 140F) Mounting: High-strength, durable adhesive SETTINGS Configurable Advertisements:
iBeacon AltBeacon (Beacon ID | Reference RSSI) Eddystone-UID Eddystone-URL (Physical Web) Advertisement Rate: 1Hz - 10Hz Transmit Power: +4dBm to -20dBm BATTERY LIFE Advertising Rate High - 100ms Medium - 200ms Low - 1,000ms Battery Life 18 months 36 months 184 months BLUETOOTH RADIOS Version: Bluetooth 5 Frequency: 2.402 GHz to 2480 GHz Transmit Power: +4dBm to -30dBm Typical Line-of-Sight Range: 5m to 50m Antenna: Omnidirectional PCB antenna CERTIFICATIONS Apple iBeaconTM: iBeacon Licensed Product EddystoneTM: Eddystone Licensed Product Bluetooth: Bluetooth controller subsystem FCC: FCC Part 15 CE: EN300328, EN60950, EN62479 IC: Industry Canada Radius Networks For more information, contact hello@radiusnetworks.com or call 202-681-9434 2018 Radius Networks, Inc. FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator your body: Use only the supplied antenna. IC Caution:
RSS-Gen Issue 5 March 2015"&"CNR-Gen 5e March 2015:
- English:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
- French:
Le prsentappareilestconf orme aux CNR d' Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l' utilisateur de l'appareildoit accepter tout brouillageradiolectriquesubi, mmesi le brouillageest susceptible d'encompromettre le fonctionnement. Pour rester en conformit avec les lignes directrices pour lexposition aux radiations de la ISED, le dispositif doit tre install et oprationnel une distance minimale de 20cm entre le radiateur et votre corps: uniquement avec lantenne fournie.