FCC ID: 2ABU6I6 Disposable Asset Tag

i6 Sticker MiniBeacon Datasheet V1.0 Minew Technologies BBeeaaccoonn // iiBBeeaaccoonn // MMiinniiBBeeaaccoonn DDaattaasshheeeett VV11..00 Model i6-W Description Sticker beacon, rectangle shape, white casing, CE&FCC certified module, includes 1pc CR2016 coin battery and gift package box, RoHS TEL: +86-755-8886 8480 FAX: +86-755-2982 5342 EMAIL: sales@minewtech.com URL: www.minewtech.com Page 1 Minew Technologies i6 Sticker MiniBeacon Datasheet V1.0 The sticker iBeacon i6 is a ultra-thin iBeacon with ARM core chipset nRF51822 and leverage BLE 4.0 technology. The standard MiniBeacon firmware has been programmed into the device. It is designed for the commercial advertising, indoor location-based service and personal electronic sticker. Minew Beacons broadcast 2.4GHz radio signals at regular and adjustable intervals. MiniBeacon can be heard and interpreted by iOS and Android BLE-enabled devices that are equipped with many mobile apps. FEATURES

- Programmed MiniBeacon standard firmware

- Included 1pc CR2016 coin battery replaceable

- The max. 50 meters advertising distance

- Small size, user-friendly and portable

- Easy to print the logo on the center of top case;

CERTIFICATIONS

- iBeacon MFi License (iBC-14-00582)

- FCC Regulation (FCC Part 15.)

- CE Regulations (Included EN300328/301489/60950/62479) i6 Sticker MiniBeacon Image 1 SPECIFICATION Compatibility

- Supported iOS 7.0+ and Android 4.3+ system;

- Compatible with Apple iBeaconTM standard;

- Compatible with all Bluetooth 4.0 (BLE) devices;

Replaceable battery and Battery Level

- Replaceable coin battery;

- Easy to get the real-time battery level notification;

Soft-reboot Configurable Parameters

- UUID, Major, Minor, Device Name, Password etc.

- Special Configuration APP;

Transmission Power Levels

- 8 adjustable levels, range from 0 to 7

- Transmission power range: -30dBm to +4dBm;

Security

- 8 characters password (Lock/Unlock parameters);

- Broadcast the encrypted data if needed;

- AES HW encryption Mounting

- Reboot the device via command without any tools;

OTA and J-Link

- Supported upgrade via Over-The-Air;

- Reserved J-Link port on the board for programming;

Connection Mode TEL: +86-755-8886 8480 FAX: +86-755-2982 5342 EMAIL: sales@minewtech.com URL: www.minewtech.com Page 2

- 3M branded adhesive for direct mounting to wall;

Shape

- Advertising mode, non-connectable;

- Configuration mode, connectable;

- Ultra-thin 3.3mm;

- Battery replaceable design Minew Technologies TURN ON i6 Please DO take out the battery sheet from i6 sticker beacon before using. ONFIGURABLE PARAMETERS i6 Sticker MiniBeacon Datasheet V1.0 Characteristic Item Default Settings 0xFFF1 0xFFF2 0xFFF3 0xFFF4 0xFFF5 0xFFF6 0xFFF7 0xFFF8 0xFFF9 0xFFFE 0xFFFF UUID Major Minor Measured Power Transmission Power Change Password Broadcasting Interval Serial ID iBeacon Name Connection Mode Soft Reboot E2C56DB5-DFFB-48D2-B060-D0F5A71096E0 (Proximity) 0 0

-59 (0xC5) 6 (0dBm) minew123 (Must be 8 characters) 9(900mS) Random (Unique serial ID for beacon) MiniBeacon_ (the maximum 14 characters) 0 (connectable, configuration mode) minew123 (it is same as the value of Change Password) ELECTRONIC PARAMETERS Value white 1 x CR2016 1.8-3.6V 10.5mA (Max.) 50 meters 50ohm Double adhesive 4.0g 32x23x 3.3 mm Item Case Color Battery Model Operation Voltage Transmission Circuit Transmission Range Antenna Accessories Net Weight Size TECHNICAL SUPPORT Remarks Other colors can be customized 1pc CR2016 coin battery, 3.0V DC Tested at 0dBm transmission power Maximum On board / PCB Antenna 1pc, high-strength, 3M brand;

With battery Null Item Datasheet Instruction SDK APP Tools Version V1.0 V2.03 V1.0 V2.0 File Name i6_MiniBeacon Datasheet_1.0.pdf Instructions_MiniBeacon_V2.03.pdf Android Reference Source Code;

iOS Reference Source Code;

iBeaconCFG; iBeaconDFU;

Updated Date 1st August, 2015 25th May, 2015 28th February, 2015 3rd March, 2015

* Minew sales team will send you these documents after the sample arrived. TEL: +86-755-8886 8480 FAX: +86-755-2982 5342 EMAIL: sales@minewtech.com URL: www.minewtech.com Page 3 Minew Technologies PACKING INFORMATION Gift/Standard Package:

i6 Sticker MiniBeacon Datasheet V1.0 Image 2 Details Quantity (i6) Net Weight Gross Weight Size Gift Box 10pcs per gift box 40.0g 130.0g 17.5 x 11 x 2 cm Carton 480pcs per carton 2.2Kg 7.0Kg 32 x 23 x 40 cm APPDENDIX 1. J-LINK Programmer Kit;

2. Over-the-Air Function;

Please contact Minew sales team to ask more related information if needed. DECLARATION The contents of this datasheet are subject to change without prior notice for further improvement. Minew team reserves the right to explain all the terms of this datasheet.

<END>

TEL: +86-755-8886 8480 FAX: +86-755-2982 5342 EMAIL: sales@minewtech.com URL: www.minewtech.com Page 4 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Arial 5pt 2.0 mm 10.0 mm 4

. 1 m m Disposable Asset Tag 1 Model: i6

. 3 FCC ID: 2ABU6I6 m m 2

. 0 m m Disposable Asset Tag Model: i6 FCC ID: 2ABU6I6

Shenzhen Minew Technologies Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 9/6/23

[Shenzhen Minew Technologies Co., Ltd.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2ABU6I6):

Name and company of U.S. agent: Sijie Zhang / THREE STONES MEDIA LLC Physical U.S. address of agent: 1200 Broadway St. APT 329, Los Angeles, CA90015 FRN of U.S. agent: 0033401761 Email address of U.S. agent: abbyzhangmedia@gmail.com

[THREE STONES MEDIA LLC] acknowledges their obligation to accept service of process on behalf of [Shenzhen Minew Technologies Co., Ltd.].

[Shenzhen Minew Technologies Co., Ltd.] with the FRN [0023364128] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). Sincerely, Signature

[Name] yanyan Zhang

[Title] Quality Supervisor 4 0 V

[Company] Shenzhen Minew Technologies Co., Ltd.

, U

) 7

) d

1 1 9 2 _ t n e g A _ S U

l e d o m

_ 8 4 Signature

[Name of U.S. agent] Sijie Zhang

[Title of U.S. agent]

[Company of U.S. agent] THREE STONES MEDIA LLC The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB.

Shenzhen Minew Technologies Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 9/6/23 To whom it may concern:

We, [Shenzhen Minew Technologies Co., Ltd.], hereby certify that the equipment for which authorization is sought (FCC ID: 2ABU6I6) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). Sincerely, Signature

[Name] yanyan Zhang

[Title] Quality Supervisor

[Company] Shenzhen Minew Technologies Co., Ltd. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. 2 0 V

, U

) i i

d n a

) i

) 5

) d

1 1 9 2 _ u q E d e r e v o C

l e d o m

_ 2 6