Model Product Name File number Version Effective date Bluetooth Z10 Earphones for V1.0 2017-07-03 sports Bluetooth Earphones Specifications Editor Reviewer Approver:
1/8 Model Product Name File number Version Effective date Bluetooth Z10 Earphones for sports V1.0 2017-07-03 Catalogue Product sketch map ..................................................... 3 1.1 Chematic diagram of product assembly ................................ 3 Product features and functions ......................................... 5 2.1 Product features .................................................... 5 2.2 Major function ...................................................... 5 2.3 Application area .................................................... 6 2.4 Operation instructions .............................................. 6 2/8 Model Product Name File number Version Effective date Bluetooth Z10 Earphones for V1.0 2017-07-03 sports Product sketch map 1.1 chematic diagram of product assembly sequence number name of material quantity colour 1 2 3 4 P40000 ear tipsMedium Z10 P08 Receiver bottom cover loudspeaker receiver upper cover of Z10 2 2 2 1 two-tone black and red Black Black sequence numbe name of material quantity colour 10 Z10 flat wire 11 Z10 Right ear hook 12 13 Right bottom shell of Z10 volume buttons of Z10 1 1 1 1 Black Black Black Black 3/8 Model Product Name File number Version Effective date V1.0 2017-07-03 14 P08 Lamp piece 15 16 17 Z10 dust plug for charging port PCB of Z10 Right middle frame of Z10 18 Right button of Z10 1 1 1 1 1 transpar ent Black Iron grey base oil Black Bluetooth Z10 Earphones for sports 5 6 7 8 9 Left hook of Z10 Left shell of Z10 button Battery Left middle frame of Z10 left shell of Z10 1 1 1 1 1 Black Black Iron grey base oil Black 4/8 Model Product Name File number Version Effective date Bluetooth Z10 Earphones for V1.0 2017-07-03 sports 5/8 Model Product Name File number Version Effective date Bluetooth Z10 Earphones for sports Product features and functions 2.1 Product Features 1. Cipset: CSR BC8635 2. Bluetooth Version: V4.1 V1.0 2017-07-03 3. Bluetooth ProtocolA2DP v1.2, AVRCP v1.4, HFP v1.6, HSP v1.2,DI v1.3 4. Radio Frequency range: 2.402GHz2.483GHz 5. Modulation Type: GFSK 6. Effictive Distance: Up to 10 meters 7. Audio Frequency Range: 20Hz20KHz 8. Loundspeaker Specification11 real copper coil 9. MICSilicon microphone -423dB/ 3.76x2.95x1.1mm 10. Battery Capacity: Rechargeable polymer Li-Ion battery 100mAH 11. Charing Time: About 2 hours 12. Charing VoltageDC 5V 13. Talk Time: 6-8 hours 14. Play Music6-8 hours 15. Standby Time: Up to 250 hours 16. Product Weight22g 17. Product Dimension36.8*18*31mm 2.2 Major Functions Play music Answer telephone Last call re-dail Muti-piont connection Support Siri Function Battery status display Lower battery alarm 2.3 Application area Personal digital accessory 6/8 Model Product Name File number Version Effective date Bluetooth Z10 Earphones for V1.0 2017-07-03 sports 2.4 Operating instruction 2.4.1 Power on Under turned off state,long press the MFB for about 3 seconds, until the indicator flashes red and blue alternatively, the earphones will directly enter pairing mode. If has paired before, the earphones will automatically connect to the paired device when it restarts. 2.4.2 Power off Under turned on state,long press the MFB for about 3 seconds until indicator flash red 3 times and cease to flash,the headset is then shut down. 2.4.3 Answering incoming calls When there is an incoming call,the phone send out a beep,or ringtone,short press MFB once to answer call 2.4.4 Transfer voice between headset and phone During a call,long press MFB for 1 second 2.4.5 Ring off During phone call,short click the MFB once or use the key on the phone to hang up the call. 2.4.6 Last number re-dial Under headset connecting state, double click MFB,you can reach re-dail 2.4.7 Reject a call When there is an incoming call,long press the MFB for about 1 second to reject call 2.4.8 SIRI function 7/8 Model Product Name File number Version Effective date Bluetooth Z10 Earphones for V1.0 2017-07-03 sports Under connecting state, long press Buttons bothvolume +and volume about 3 seconds then release it to activate SIRI Function. 2.4.9 Volume adjustment / Previous and next track Click once the +/- button to turn up/down the volume. Long press the -/+ button to switch to the previous/next song. 2.5.1 Play / Pause / Answer When playing songs, click the MFB to pause, and click again to play. When phone call comes, click the MFB to answer the phone, and click again to hang up 2.5.2 Charing Charge the earphones with DC5V. The indicator will glow red when it is charging, and turn blue when the battery is full. 2.5.3 Factory reset When charging,long press MFB until the indicator flashes blue for 3 times, the headset will clear the pairing information. 8/8 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.