FCC ID: 2AVHR-MSW10 Bonsai Bluetooth Speaker Lamp with Wireless Charging Pad

User Manual MS-W10 Operation Instructions Plug in AC Adapter Turning the LED light ON/OFF

*Light on automatically when plugging in

*Touch the LED Brightness Controller again to turn off the light. Brightness Control

*Slide your finger over the LED brightness controller to dim or brighten the LED Light. Good Night Mood/Sleep Mode

*Touch the LED Brightness Controller for 3-5 seconds to activate Good Night Mood mode/Auto-sleep mode and light will be turned off automatically within 30 minutes.

*Any operation will exit the Good Night Mood/Sleep Mode. Wireless Charging(apply to partial models)

*Place your QI wireless charging enabled Smartphone over the wireless charging pad. Then begin to charge.

*The indicator light on pad color will change into ice blue. Paring Tree of Light

*Press Power Button until the Bluetooth indicator flashes with disconnected notification sound or certain sound.

*Turn on the Bluetooth function of your devices and scan MS-W10 out.

*Pair to MS-W10 with connect notification sound or certain sound.

*To control the volume and playback via paired device or top pad of Tree of light.

*Click button+ or - to control volume. Long press+ for next song and - for previous song. The blue indicator light will be off if Tree of light not in use for a long time. TWS function

*The mobile phone or device connects 1pc product as the host, press the volume + and - at the same time, the sound will be prompted, and automatically search for another product. Stop searching after 1 minute.

*Turn on another produce as a slave. After the slave is connected to the master, the master will prompt the sound, operate any one of the product, which can control the sound function of another product at the same time.

*Press the volume + and - of the main unit at the same time again, the two products will be disconnected and the sound will be prompted. Appearance & interface Description MS-W10 LED Light LED brightness controller 1. Play/Pause(Long Press for Bluetooth) 2. 3. Wireless charging pad 4. 5. Charge-in port, Type-C 6. Charging Indicator Light 7. Bluetooth Indicator Light 8. Volume - /Previous Song 9. Volume + /Next Song Specification Model Name: MS-W10 Bluetooth Speaker/Wireless Charger Desk Lamp Wireless Charging: 5W/7.5W/10W Brightness: 200lm Input Voltage/Current: 12V/2A Conversion Rage: 70-75%

Bluetooth Version: V5.0 Bluetooth Frequency: 2.4GHZ Bluetooth Profile: A2DP, AVRCP Packaging Contents

*Tree of Light x1

*Charging Adaptor x1

*User Manual x1 Working Conditions Indoor Use Only Temperature: -40~40/-40~104 Precautions Please read all safety instructions and warnings thoroughly before using this product. Improper use of this product may result in damage to this or attached products. 1. Do not disassemble the product or attempt to fix it. 2. Kindly use an original charging cable provided. 3. Do not attempt to replace any part of this product or battery inside 4. Do not crush, puncture, dispose of in fire, short the contacts or expose the product to water or other liquids. sunlight or heat. 5. Do not store or use the product in a high-temperature environment, including intense 6. Avoid drops, bumps, abrasions and impacts. 7. 8. If there is any reason to believe that there is damage to the product, discontinue use immediately. If you find that the product is too hot, is emitting an odour, or is deformed, punctured or exhibits any suspicious or abnormal behaviour, discontinue use immediately and contact our customer service. 9. The product is not suitable using for Children. FCCWarningStatement Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecould voidtheusersauthoritytooperatetheequipment.Thisequipmenthasbeentestedandfoundto comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidential installation. This equipment generates uses and can radiate radio frequency energy and, if not installedandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradio communications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticular installation. If this equipment does cause harmful interference to radio or television reception, whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotryto correcttheinterferencebyoneormoreofthefollowingmeasures:

Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris connected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowing twoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and

(2) this device must accept any interference received, including interference that may cause undesiredoperation. RF Exposure Statement To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

STerer te i I r q TLD 008 gp 08 02 01 09 0 Or 0 Oc OF pete 06 08 OL MeGGiguacauwan. s t ogereise 23 ty. 3 Isog ME OF OF 108 08 Of 09 09 OF oF Oz 0+ O0VOs 08 OF. 09 08 OF: Cet 05 OF OF oz 0100206 08 02 09 05 Ov oF Oz OF ODLOS 08 OL 09 05 Or cE oz Steed Liblidiatidantuahin {Ft PR ol Redan lituduslihuhuladuntadiatuntaddualontwilantibanl

Shenzhen Relight Technology Co.,Ltd Agent Authorization Company: Shenzhen Relight Technology Co.,Ltd Address: 6th Floor, Building A, Guancheng Low Carbon Industrial Park, Gongming Town, Guangming New District, Shenzhen, China Product Name: Bonsai Bluetooth Speaker Lamp with Wireless Charging Pad Model Number(s): MS-W10 Product Description: Bonsai Bluetooth Speaker Lamp with Wireless Charging Pad We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: Mar. 11, 2022 Name:

KEVIN ZONG Title:

QC MANAGER Company:

Shenzhen Relight Technology Co.,Ltd

Shenzhen Relight Technology Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Mar. 11, 2022 Subject; Request for Confidentiality FCC ID: 2AVHR-MSW10 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: KEVIN ZONG Title: QC MANAGER