FCC ID: 2A7EH-F1 VANTRUE Falcon 1 4K+1080P Dual Dashcam

English/Deutsch/Franais/Polski Falcon 1 www.vantrue.net support@vantrue.net Made in China VANTRUE Falcon 1 4K+1080P Dual Dashcam User Guide Model No.: F1 78mmX120mm 70g Hey, find us here:

www.vantrue.net/contact facebook.com/vantrue.live CONTENTS 1.Installation Guide 2.Structure Diagram 3.Basic Operation 4.Troubleshooting 5.Specification 6.After-sales service 1 7 8 21 23 25 Warm tips:

1. 2. 3. 4. 5. 6. 7. Please read this User Manual carefully before using the camera. This product is a motorcycle-specific recorder and is limited to connecting to a 12V battery. Please turn off the power of the motorcycle before installation, and turn on the power after installation is completed. The Wi-Fi name is F1_VANTRUE_XXXX and the initial Wi-Fi password is 12345678. It is strictly forbidden to use high-pressure water gun to flush the machine to avoid water in the body. This product supports up to 512GB SD card storage. To ensure normal video recording, please use Class 10/U3 and above standard high-speed cards. The F1 front and rear cameras are fully sealed and waterproof, but you still need to avoid using solvents such as grease, alcohol and tar cleaner to contact the lens to avoid damaging the waterproof layer. Note: For normal storage of video files, please format the SD card regularly. 1. Installation Guide 1.1 Inserting a Memory Card (Recommended: Vantrue U3 high-speed microSD card). After inserting the SD card for the first time, please press and hold the remote control record button for 10 seconds to start formatting the card. Use the matching screwdriver to remove the slot sealing cover Insert an Memory Card Note:

After removing the cover of the SD card slot, put the screw in place to avoid losing it. 1.2 Installing the Dash Cam Main Unit Please install the main unit a location without metal cover, such as under the seat, determine the location and tear off the 3M adhesive to fix it. Note:

<1>The Wi-Fi signal transmitting part is on the front

- 1 -

of the main unit. Please do not install it facing down when installing the logo side of the main unit or under the metal parts of the motorcycle.

<2>. F1 dash cam main unit needs to be fixed with 3M adhesive (shipped as standard). Please fix the 3M adhesive in the recess of the F1 main body protective case and then paste it to the motorcy-

cle.

<3>. In order to improve the cooling efficiency of F1 mainframe, you can remove the protective case before installation.

<4>. If installed on the curved surface, we recommend using cable ties for fixing.

- 2 -

1.3 Installing the remote control You can choose a suitable installation position according to your own usage habits and install the remote control on the handlebars, the front part of the car, the side of the fuel tank, etc. Note :

<1>. When installing the motorcycle dash camera, you need to face up the button side to avoid affecting the GPS signal reception.

<2>. Please do not use 3M adhesive to cover the speaker hole on the back of the remote control in order to increase the stability of the remote control. Speaker hole

<3>. The side is the microphone receiving hole, please do not put the receiving hole directly in front to avoid serious wind noise. REMINDER:

- 3 -

1.4 Installing the Power Cord Connect the power cord to the fuse box as follows. Step 1: the red power cable is connected to the positive terminal of the battery. Step 2: the ACC signal wire (yellow wire) is connected to the ACC power fuse of the battery. Step 3: The black ground wire is connected to the negative terminal of the battery or the override position. Step 4: start the motorcycle power supply and wait for the device to start. Step 5: After confirming that the power supply is properly installed, use the cable ties to organize the storage lines and secure them to the motorcycle. Select the location in the fuse box where the fuse can be accessed. Note:

<1>. Before installation and wiring, you need to turn off the motorcycle and turn off the motorcycle power to avoid short circuit during the operation.

<2>. For driving safety, please avoid leaving too long power cables exposed. If necessary, please use insulating tape to wrap and fix them.

- 4 -

1.5 Installing the Front and Rear camera EN The front and rear cameras can be loosened by the hexagonal screw to adjust the lens recording angle, as well as the recording direction. Camera mount holder head cap screws: loosened, you can adjust the camera angle up and down, can be inverted, side-mounted rotation to adjust the direction of the camera recording. Camera holder 3M adhesive for camera holder Lens orientation correction line Multifunctional camera holder:

fixing screw holes Multifunctional camera holder:

can be mounted on motorcycle handlebars and other locations Note:

<1>. If the front camera is mounted on the handlebar position, you need to fix the front camera to the multifunctional camera holder first, and then fix the holder on the motorcycle handlebar.

<2>. The front/rear cameras comes with 3M adhesive, just stick it in the front/rear of the motorcycle after choosing the right position.

- 5 -

(We recommend mounting the front and rear cameras on the motorcycle body instead of the handlebars to reduce camera shake and improve the stability of the video)

<3>. The line of the camera is a high frequency data line. Please do not bend the cable 180 degrees backwards, as it may cause damage to the cable. We recommend using a circular way to tie the wire fixed.

<4>. Due to different installation positions, the front/rear lens may appear backwards, you can adjust the lens according to the direction of the lens correction line.

<5>. When adjusting the direction of the camera recording, you can use the App real-time preview function to accurately adjust to the appropriate recording effect.

- 6 -

After the lens is installed, you can enter the VANTRUE App real-time preview to correct the lens orientation. After entering the live preview, click on the word left of the screen to confirm the lens direction. calibration line at the bottom 2. Structure Diagram 1 6 7 8 9 5 3 2 10 4 11 12 13 1.F1 main camera 2.4K front camera 3.1080P Rear Camera 4.Remote control 5.Power cord 6.Rear camera port 7.Front camera port 8.Connect the remote control 9.Connect the power cord 10.Fuse

- 7 -

11.Red power cable (positive power supply) 12.ACC signal wire (yellow wire) 13.Black ground wire (power negative) 14.Protective housing Note:

When connecting the front camera cable, until you hear the "click" sound, indicating that the cable buckle has been installed in place. You can use a screwdriver to lift the end of the snap to make the snap easier to snap into the slot. 3. Basic operation (App operation/remote control operation) Remote control button function introduction

<1>.Power/Emergency button Long press function: Power off Short press function: Power on; After power on, short press to lock the file, and short press again when locking the file to capture the picture.

<2>.Recording button Long press function: After power on, long press for 10 seconds to format SD card. Short press function: During recording, short press to pause recording; during standby, short press to start recording.

- 8 -

1 2 3

<3>.Microphone button Long press function: After power on, long press to turn on/off Wi-Fi. Short press function: Short press to turn on/off the microphone; short press 5 times or more continuously to restore the default factory settings. LED Indicator Power Light(Red Light) Status Steady Light Normal power supply Blinking Light OFF Fast flashing, emergency recording Power off Recording light(Green Light) Status Steady Light Blinking Light Standby; in emergency recording. Fast flash: In formatting the card. Slow Flash: In Recording 1 2 3 Microphone light(Blue Light) Status Steady Light Off Audio On Audio Off In parking mode, the indicator status is as follows. Parking Mode Type Red light + Green light + Blue light:

Flashing at the same time, in the recording

- 9 -

Collision Detection Red light + Green light + Blue light:

Off at the same time, in standby App Operation App Download Scan the QR code below to download the latest App from Google Play and App Store. Or you can search Vantrue on Google Play and App Store to download it. First time connection steps.

<1>. Power on the motorcycle dashcam, the F1 will open 5G Wi-Fi by default, and there will be

"Wi-Fi on" prompt after power on.

<2>. Open Vantrue App, click "+" to add the device, the App will jump to the cell phone Wi-Fi settings interface, please find the F1_VAN-

TRUE_XXXX name Wi-Fi in the Wi-Fi settings interface, enter the default password 12345678, wait for the Wi-Fi connection success, and then return to App.

- 10 -

- 11 -

Note:

1. For Wi-Fi connection operation, please refer to Figure 1~4. 2. After the first successful connection, when you turn on F1 again in the future, you can connect automatically by clicking the App. If you turn off the function that Wi-Fi starts when you turn on the motorcycle dashcam, you need to manually turn on Wi-Fi to connect. If you forget the password, you can press the microphone button 5 times or more to restore the factory settings and restore to the initial password 12345678. App Operation Camera Settings Mileage statistics Lens correction auxiliary line Full-screen Icon Front and Rear Display Switch Snapshot Microphone ON/OFF Stop Recording Icon Album You can view live preview of driving screen, change settings, play files, view video GPS track, share files, view mileage statistics analysis and other functions through the App.

- 12 -

Note:

<1>. The mileage statistics analysis function is based on the recording file in the current F1 SD card, but if the card is formatted, or the recording file does not have GPS information, the mileage statistics analysis will not be possible.

<2>. Camera calibration line is used to adjust the camera recording direction. When installing the front and rear lens of the car, you can use this function. App setting menu Menu Options Sync phone time Language Wi-Fi Resolution Sync phone time is turned on by default, you can sync phone time to F1 dashcam. English, French, Spanish, German, Italian, Simplified Chinese, Russian, Japanese, Korean can be set, and the default language is English. This setting contains Wi-Fi On Start, Wi-Fi Auto Off, Wi-Fi Mode, Wi-Fi Information. Wi-Fi on start: default on, need to open manually after closing Wi-Fi auto shutdown: always on by default, can choose 5 minutes or 10 minutes to shut down Wi-Fi mode: open 5G Wi-Fi by default, can switch to 2.4G Wi-Fi Wi-Fi information: check Wi-Fi name and Wi-Fi password There are two resolution modes to choose from, front+back and front resolution. Front+back default is resolution 2160P+1080P(HDR) 30FPS

- 13 -

Video 2-in-1 Loop Recording Front of the car default is the resolution 3840x2160P 30FPS Off by default. When turned on, you can integrate the front and rear camera recording video into one segment. The default is 1 minute, other options can be selected. When the SD card file storage is full, it will overwrite the loops automatically. Voice Prompt Default is on G-sensor Exposure Indicator light Crash Sensitivity Lock the sensitivity of the recording, the default level is 3, you can adjust the front and back, left and right, up and down different directions of the collision sensitivity level respectively. The default is +0.0, you can increase the exposure value or reduce the exposure value as needed Indicator light is on by default WDR Default is on Rear camera mirroring License plate number setting Tag Stamp The default is on, the car behind the display screen for the mirror image, off the display screen for the original image. Support license plate setting in Chinese, English and Japanese Default is to display date and time tag, make and model tag, license plate tag, speed tag, GPS location tag

- 14 -

Time-lapse recording Parking Mode Low-light Night Vision in Parking Mode Battery low voltage protection GPS settings Default is off, you can choose 1FPS, 5FPS, 10FPS, 15FPS frame rate to start time-lapse recording The default is off. When turned on, it is collision detection mode. It needs to be connected with ACC function before it can be used. The default is on. When turned on, it takes effect when entering parking mode Battery low voltage protection In this interface, you can check the current voltage of the motorcy-

cle battery, in addition, under this function, you can set low voltage protection Open by default, you can change the speed unit and view the GPS signal strength Wi-Fi connection password Wi-Fi initial password is 12345678, you can change it to other password Formatting Format SD card GPS settings Date/time Volume Beep GPS auto time update is on by default. After turning off, you can manually change the time and date Date format default YY/MM/ DD Adjust the volume level of the speaker at the remote control Turn on all tones by default, respectively, switch on/off sound, key tone, lock tone, format reminder tone, abnormal stop recording reminder

- 15 -

Frequency 50Hz/60Hz Certificated Info System information View all F1 certification information Restore the default factory settings, after restoring, Wi-Fi password will also be restored to the initial password Playback, delete and download files in App Enter the file browse in App, you can view the daily recording files, play back, delete, download to local save. 9:41 1162023 _115036_0079_N_A.MP4 Click on it to play the file in landscape. 1/16/2023 11:5:35 F1 000.000000. 000.000000. 36MK/H Note:

Click to delete the file Click to download the file Note:

<1>. No data traffic consumption is generated for playback and downloading files within the App.

- 16 -

To view GPS information, you need to download the video file to the local folder of the APP first, and then play it in the local folder.<2>. You need to download the video to local to view the GPS track information. After the video is downloaded successfully, if the GPS track information is not displayed, please disconnect the Wi-Fi connection and refresh it to display the GPS track information on the map. App share files Already downloaded files can be shared to social media by editing within the App. Video sharing length in the range of 5-30s Video sharing can be done with or without sound Shared video file size Confirm the video editing, after successful editing, the shareable social media apps will pop up automatically Note:

Data traffic is required for sharing, so you need to disconnect the Wi-Fi connection with F1.

(Required for some Android users)

- 17 -

OTA Upgrade F1 main camera upgrade supports OTA upgrade in App. There are two types of OTA upgrade pushes:

<1>. After opening the App, an upgrade prompt will pop up.

- 18 -

<2>. In the "About" screen, click OTA update to check for updates. When the upgrade file is detected in the above 2 ways, click OK, it will enter the upgrade screen, click "Download". Once the download is complete, install the dashcam immediately.

- 19 -

Note:

<1>. If the upgrade fails, please check whether the Wi-Fi connection is normal. During the upgrade, please do not disconnect the Wi-Fi, and make sure the recorder host is powered on properly.

<2>. If the OTA upgrade has been failed, you can use SD card upgrade, remove the SD card, copy the upgrade software into the SD card, then insert the SD card into the host computer, and then power on the upgrade. Upgraded Files

- 20 -

4. Troubleshooting Tip: The system supports a maximum of 512G SD card storage, in order to ensure normal video, we recommend the use of genuine storage cards. As the recording system keeps reading and writing data, you must use a high-speed card that reaches the standard of Class10 and U3 or above. Also, do not plug and unplug the SD card when the system is on, so as not to cause damage to the SD card.

<1>. The motorcycle does not turn on after starting:

Please check if the line connection is normal.

<2>. Press the power on button but the dashcam can't power on: Please check whether the line connection is normal.

<3>. The dashcam can not record / can not take pictures / can not lock the video: Please check whether to insert the SD card or need to format the SD card; SD card format if the problem still exists, please re-insert the SD card or replace the new card to solve.

<4>. The front or rear camera screen is not displayed: Please check whether the camera cable is connected properly.

<5>. Video becomes blurred: Please check if there is dust on the lens. If there is, please wipe the lens.

<6>. No sound in the video: Please check if the microphone is off.

<7>. Many videos are incorrectly locked during normal driving: Please adjust the G-sensor sensitivity. Default is 3. Please adjust to 1.

<8>. When a motorcycle collision occurs the video file is not locked: Please check whether the sensitivity adjustment of G-sensor is above 1st gear. If the crash sensitivity is higher than 1 stop, please

- 21 -

further adjust the sensitivity level of the G-sensor higher. Please also note that if time lapse mode is turned on, the video cannot be locked and only pictures can be taken.

<9>. Wi-Fi does not connect properly.: Please check whether Wi-Fi is turned on. When Wi-Fi is turned on, the Wi-Fi of your phone will show the F1 Wi-Fi name F1_ VANTRUE_XXXX (initial password is 12345678).

<10>. If there is an abnormal phenomenon such as a dead machine, please restart the power.

<11>. The App shows and recorded video appears to have streaked EMI or purple EMI. 1) Please check the motorcycle spark plug type. Please use R-rated resistive spark plugs. 2) Check the camera alignment and cable ties for problems. When you run the wires, please run the wires smoothly and do not fold them. Please don't tie the wire too tightly or squeeze it too tightly with the shell when you tie it.

- 22 -

5. Specifications The specifications of this product may change without prior notice due to product improvements. Model Chips F1 Novatek high-performance processor Image Sensor G-sensor Camera Angle Aperture Languages Video Resolution Video File Format Front Camera: Sony 8MP CMOS Sensor Rear Camera: Sony 2MP CMOS Sensor Built-in Sensor Front: 160wide viewing angle;

Rear: 145 wide viewing angle Front: F/1. 8 wide aperture Rear: F/1. 8 wide aperture Engish/Franais/Espaol/Deutsch/

Italiano///

/Polski Front + Rear recording mode:

2160P+1080P(HDR) 30FPS;

1440P+1080P(HDR) 30FPS;

1080P+1080P(HDR) 30FPS;

720P+720P(HDR)30FPS;

2160P+1080P 30FPS;

1440P+1080P 30FPS;

1080P+1080P 30FPS 720P+720P 30FPS Single front recording mode:

3840x2160P 30FPS 2560x1440P 30FPS 1920x1080P 30FPS 1280x720P 30FPS MP4

- 23 -

Picture Format JPEG Memory Storage Waterproof Power Source Power Supply Wi-Fi GPS Working Temperature Storage Temperature External: 32GB-512GB Micro SD Card, U3, Class 10(not included in the package) IP67 Built-in super capacitor 12V, 2A Support Yes

-4F to 140F(-20C to 60C)

-13F to 158F(-25C to 70C)

- 24 -

6. Warranty & Support Warranty The VANTRUE F1 Dash Cam comes with a full 12 months warranty. If you register your product on our official site (www.vantrue.net/register), you can extend the warranty to 18 months. Support new If you have any questions regarding your product, please do not hesitate to contact us at support@vantrue.net, or drop us a message through the live chat box at www.vantrue.net. Queries are typically answered within 12-24hours. Your opinion matters VANTRUE is firmly committed to always improving our products, services, and user experience. If you have any thoughts on how we can do even better, we welcome your constructive feedback and suggestions. Connect with us today at support@vantrue.net.

- 25 -

reasonable frequency harmful FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide protection againstharmful interference in a residential installation. This equipment generates, with energy uses and can radiateradio and, maycause interference the there thatinterference occur is equipment cause determined by turning the equipmentoff interference Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is harmfulinterference to radio or television reception, which can be user in communications. installation. instructions, guarantee does accordance However, this If thefollowing measures:

radio a encouraged if to in particular installed correct more used one and and will not not the on, the try no by or to to of is connected. Consult the dealer or an experienced radio/TV technician for help. Any Caution:

could void your authority to operate this equipment. modications changes this or to device not explicitly approved by manufacturer 15 part with complies device This conditions:

(1)This interference received, including interference that may cause undesired operation. interference, Operation harmful subject device device Rules. cause may and FCC this not the

(2) to of is the following two must accept any complies equipment This FCC environment. should between the radiator and your body. equipment with This radiation be installed exposure and limits operated set with forth for an minimum uncontrolled 20cm distance ISED Statement Operation nd This

(2) operation The digital subject English:

to must device. is device the of apparatus This the accept device following any complies two with conditions:

(1) Industry Canada licenseexempt not that cause may may RSS standard(s). interference, a undesired cause This device interference interference, including complies with Canadian CAN aux French:

Le exempts pas prsentappareilestconforme de produire radio ne olectriquesubi, le l'appareil numrique du ciem conforme canadien peut CNR L'exploitationestautorise l'utilisateur

(2) susceptible brouillageest licence. de brouillage, mmesi doit et

(B)/NMB3(B). ICES3 d'Industrie deux aux de l'appareildoit d'encompromettre Canada conditions 3 (b) / nmb applicables suivantes:

tout appareils aux l'appareil

(1) brouillageradi fonctionnement. accepter le 3 (b). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance exposure can with and compliance. information exposure, Canadian obtain users 102 RSS on RF RF cet appareil est conforme l'exemption des 102 cnr donnes canadiennes sur l'exposition aux champs rf et la conformit. limites d'valuation courante dans la section 2.5 du des utilisateurs l'exposition conformit peuvent obtenir avec 102 aux rss les de rf, et

equipment This environment. complies with Canada radiation exposure limits set forth for an uncontrolled be and with should installed operated minimum This equipment radiator & your body. Cet quipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. The device for operation in the band 51505250 MHz is only for indoor use to reduce the between distance 20cm the potential for harmful interference to co-channel mobile satellite systems. L'appareil destin fonctionner dans la bande 5150-5250 MHz est uniquement destin une utilisation en intrieur afin de rduire le potentiel d'interfrences nuisibles aux systmes mobiles par satellite cocanaux.

VANTRUE DescriptionVANTRUE Falcon 1 4K+1080PDual Dashcam Model(HVIN):F1 Lite Input12V 2A FCC ID: 2A7EH-F1 IC :28650-F1 5.2 GHz 5.2GHz band is restricted to indoor use due to the Radio Law VANTRUE DescriptionVANTRUE Falcon 1 4K+1080PDual Dashcam Model(HVIN): F1 Input12V 2A FCC ID: 2A7EH-F1 IC :28650-F1 5.2 GHz 5.2GHz band is restricted to indoor use due to the Radio Law VANTRUE DescriptionVANTRUE Falcon 1 4K+1080PDual Dashcam Model(HVIN): F2 Input12V 2A FCC ID: 2A7EH-F1 IC :28650-F1 5.2 GHz 5.2GHz band is restricted to indoor use due to the Radio Law

*Label position on the side of the dash cam.The size of the MIC logo is 5mm*5mm.

Shenzhen Sanjiang Lechuang Technology Co., Ltd. Area 401B, 4th Floor, Building A7, No. 416,Xue gang North Road, Qinghu Community, Longhua Street, Longhua District, Shenzhen, Guangdong Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-2-15 To whom it may concern:

We, Shenzhen Sanjiang Lechuang Technology Co., Ltd. , hereby certify that the equipment for which authorization is sought (FCC ID: 2A7EH-F1) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fec.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). Sincerely, fo. nd Signature Ada liang Director Shenzhen Sanjiang Lechuang Technology Co., Ltd. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 DO1.

Shenzhen Sanjiang Lechuang Technology Co., Ltd. Add: Area 401B, 4th Floor, Building A7, No. 416,Xue gang North Road, Qinghu Community, Longhua Street, Longhua District, Shenzhen, Guangdong Date: 2023-2-15 FCC ID: 2A7EH-F1 Dear Sir/Madam, We, Shenzhen Sanjiang Lechuang Technology Co., Ltd. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:

Product name: VANTRUE Falcon 1 4K+1080P Dual Dashcam Model no.: F1, F1 Lite, F2 Sincerely, fds. Name/Title : Ada liang/Director Company: Shenzhen Sanjiang Lechuang Technology Co., Ltd. Address: Area 401B, 4th Floor, Building A7, No. 416,Xue gang North Road, Qinghu Community, Longhua Street, Longhua District, Shenzhen, Guangdong Phone: 0755-21078547 Fax: 0755-21078547 E-Mail: ada.liang@vantrue.net

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2023-2-15>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2A7EH-F1 Model name FL For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Xd Md Test Setup Photos User's Manual Parts List Tune Up Operational Descriptions

The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, fds. Name/Title: Ada liang/ Director Company: Shenzhen Sanjiang Lechuang Technology Co., Ltd. Address: Area 401B, 4th Floor, Building A7, No. 416,Xue gang North Road, Qinghu Community, Longhua Street, Longhua District, Shenzhen, Guangdong Phone: 0755-21078547 Fax: 0755-21078547 E-Mail: ada.liang@vantrue.net

Shenzhen Sanjiang Lechuang Technology Co., Ltd. Area 401B, 4th Floor, Building A7, No. 416,Xue gang North Road, Qinghu Community, Longhua Street, Longhua District, Shenzhen, Guangdong Date: 2023-2-15 FCC ID: 2A7EH-F1 Model Number: F1 To:

Federal Communications Commission. Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Shenzhen Sanjiang Lechuang Technology Co., Ltd. , declare that this EUT

(FCC ID: 2A7EH-F1) doesnt have Ad Hoc mode function on non-US/ Canada frequencies . In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, fd. Vn Name/Title: Ada liang/Director Company: Shenzhen Sanjiang Lechuang Technology Co., Ltd. Address: Area 401B, 4th Floor, Building A7, No. 416,Xue gang North Road, Qinghu Community, Longhua Street, Longhua District, Shenzhen, Guangdong Phone: 0755-21078547 Fax: 0755-21078547 E-Mail: ada.liang@vantrue.net

Shenzhen Sanjiang Lechuang Technology Co., Ltd. Area 401B, 4th Floor, Building A7, No. 416,Xue gang North Road, Qinghu Community, Longhua Street, Longhua District, Shenzhen, Guangdong Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-2-15 To whom it may concern:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2A7EH-F1 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, fod.

- Lad Name/Title: Ada liang/Director Company: Shenzhen Sanjiang Lechuang Technology Co., Ltd. Address: Area 401B, 4th Floor, Building A7, No. 416,Xue gang North Road, Qinghu Community, Longhua Street, Longhua District, Shenzhen, Guangdong Phone: 0755-21078547 Fax: 0755-21078547 E-Mail: ada.liang@vantrue.net

- Shenzhen Sanjiang Lechuang Technology Co., Ltd -

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 2/23/23

[Shenzhen Sanjiang Lechuang Technology Co., Ltd] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2A7EH-F1):

Name and company of U.S. agent:GSS SERVICE INC Physical U.S. address of agent:6547 N Academy Blvd #2266 Colorado Springs Co 80918 USA FRN of U.S. agent:0033402082 Email address of U.S. agent:michouxlogan@outlook.com

[GSS SERVICE INC] acknowledges their obligation to accept service of process on behalf of

[Shenzhen Sanjiang Lechuang Technology Co., Ltd].

[Shenzhen Sanjiang Lechuang Technology Co., Ltd] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). Sincerely, Signature

[Ada.liang]

[Director]

Signature

[Name of U.S. agent]:michoux logan

[Title of U.S. agent]:manager

[Shenzhen Sanjiang Lechuang Technology Co., Ltd]

[Company of U.S. agent]:GSS SERVICE INC The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC. 3 0 V

, U

) 7

) d

1 1 9

. 2 _ t n e g A _ S U

l e d o m

_ 8 4

Shenzhen Sanjiang Lechuang Technology Co., Ltd. Area 401B, 4th Floor, Building A7, No. 416,Xue gang North Road, Qinghu Community, Longhua Street, Longhua District, Shenzhen, Guangdong UNII Device Declaration Letter To whom it may concern:

We have declared below featured for FCC equipment authorization, Device FCC ID: 2A7EH-F1

(1)

(2)

(3)

(4)

(5) DFS Device: Master Client with Radar detection capability KINA Client without radar detection capability, Active / Passive Scanning , adhoc mode access point capability Active Scanning passive scanning Frequency (the device can (where the device Ad Hoc Mode Access point Band (MHz) transmit a probe is can listen only capability capability

(beacon)) with no probes) 5180-5240 Kl Yes No Yes No KlYes No Kl Yes No 5190-5230 Kl Yes No XX Yes No Kl Yes No Kl Yes No 5210-5210 Kl Yes No XX Yes No Kl Yes No Kl Yes No 5745-5825 Kl Yes No XX Yes No KlYes No Kl Yes No 5755-5795 Kl Yes No XX Yes No Kl Yes No Kl Yes No 5775-5775 Kl Yes No XX Yes No Kl Yes No Kl Yes No Country code selection ability Yes I No If yes, pls explain how it was implemented:

Meet 15.202 requirement Yes No pls check below :

[XJA master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that oper operations modes cannot be modified by end user or an installer. Apply J Does not apply

(If apply, pls help to provide explanation on it was implement, and how software was controlled) Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, fd. Un

(Signed) Name/Title: Ada liang/Director Company: Shenzhen Sanjiang Lechuang Technology Co., Ltd. Address: Area 401B, 4th Floor, Building A7, No. 416,Xue gang North Road, Qinghu Community, Longhua Street, Longhua District, Shenzhen, Guangdong Phone: 0755-21078547 Fax: 0755-21078547 E-Mail: ada.liang@vantrue.net