FCC ID: 2AW68-NP2035G AC2000 Dual Band WiFi GPON Terminal, Dual Band WiFi GPON Terminal

NP2035G Package Content NP2035G x 1 Ethernet Cable x 1 Optic Cable x 1 Telephone Cable x 1 Power Adapter x 1 Quick Installation Guide x 1 Quick Installation Guide Ports and indicators Dual Band WiFi GPON Terminal 1. Hardware connections Connect a fiber optic cable to the PON port. Connect a computer to the GE port using the 2. WiFi connection Using SSID Ethernet cable (optional). Use the SSID and Wireless Key on the device label Connect a telephone to the TEL port using the to connect wireless to the device. On your telephone cable (optional). smartphone or notebook, find this SSID. Enter the Wireless Key to connect. Using WPS Press the WPS button on the device and the WPS indicator will blink. Then press the WPS button on the client. If the WPS method fails, use the SSID and Internet On In Routing mode and WAN connection is up. Blinking Attempt to get an IP address. function. Blinking The device is being connected through WPS function. No internet connection or the The WPS function is not enabled, wireless key to set up a WiFi connection. Off modem router is operating in 3. Configure on the web Bridge mode. Configure the device on the web page according to On The device has been registered. the information on the device label. PON Blinking Optical signal is detected. Open a web browser, enter the IP address, default User Name and Login Password, and then click Login. 4. LED Indicator Explanation Description Name State Power On Off The device has been turned on. The device has not been turned on. LOS Off No optical signal is detected. Blinking No optical signal is detected. Off On Optical signal is detected. Wi-Fi has been turned on. WIFI Blinking Wi-Fi data is being transmitted. Off On Wi-Fi has been shut down. The device is successfully connected through WPS WPS TEL1-

TEL2 LAN1-

LAN4 Off On or the device is successfully connected through WPS function. The VOIP server has been registered. Blinking The voice service is in use. The VOIP server is not registered. Off On Blinking Data are being transmitted. Off The LAN port is not connected. 5. Button Explanation Explanation Name RESET WPS Hold down for more than 5 seconds and release to restore the factory settings. Press the button to connect the device through WPS. WLAN Enable/disable wireless network. 6. Environment Operating Temperature: 0~40 Storage Temperature: -40~70 The LAN port is properly Relative humidity: 10%~90%, non-condensing connected. Storage humidity: 5%~95%, non-condensing FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV Caution!

Any changes or modifications not expressly approved by residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause technician for help. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set harmful interference to radio communications. However, forth for an uncontrolled environment. This equipment there is no guarantee that interference will not occur in a must be installed and operated in accordance with particular installation. If this equipment does cause provided instructions and the antenna(s) used for this harmful interference to radio or television reception, transmitter must be installed to provide a separation which can be determined by turning the equipment off distance of at least 20 cm from all persons. and on, the user is encouraged to try to correct the This device complies with Part 15 of the FCC Rules. interference by one or more of the following measures:

Operation is subject to the following two conditions:

the party responsible for compliance could void the user's authority to operate the equipment.

[model Shenzhen SDMC Technology Co.,Ltd. Room 1022, Floor 10, Building A, Customs Building,No. 2, Xin'an 3rd Road, Dalang Community, Xin'an Street, Bao'an District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-07-13 To whom it may concern:

We, Shenzhen SDMC Technology Co.,Ltd., hereby certify that the equipment for which authorization is sought (FCC ID: 2AW68-NP2035G) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fec.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). Sincerely, Signature Ryan Yan Shenzhen SDMC Technology Co.,Ltd. 47 of the CFR as well as KDB 986446 DO1. ased on the referenced rule parts of The information provided in this letter is

Shenzhen SDMC Technology Co.,Ltd. Room 1022, Floor 10, Building A, Customs Building,No. 2, Xin'an 3rd Road, Dalang Community, Xin'an Street, Bao'an District, Shenzhen, China Date: 2023-7-18 FCC ID: 2AW68-NP2035G Dear Sir/Madam, We, Shenzhen SDMC Technology Co.,Ltd. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model name and product name are different for these model:

Product name: AC2000 Dual Band WiFi GPON Terminal, Dual Band WiFi GPON Terminal Model! no.:; NP2035G, NP2081GB Sincerely, Name : Ryan Yan Company: Shenzhen SDMC Technology Co.,Ltd. Address: Room 1022, Floor 10, Building A, Customs Building,No. 2, Xin'an 3rd Road, Dalang Community, Xinan Street, Bao'an District, Shenzhen, China Phone: 0755-86019782 Fax: 0755-86019782 E-Mail: ryan_yan@sdmctech.com

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2023-7-13>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID Model name 2AW68-NP2035G NP2035G For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Short-Term Short-Term Confidentiality Confidentiality Confidentiality Days External Photos Xx] 180 Internal Photos L] x 180 Block Diagram xX CJ Schematics x) LJ Test Setup Photos L] Xx 180 Users Manual LJ x 180 Parts List LJ L]

Tune Up L]

Operational Descriptions Xx The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, HBA EA}

Name: Ryan Yan Company: Shenzhen SDMC Technology Co.,Ltd. Address: Room 1022, Floor 10, Building A, Customs Building,No. 2, Xin'an 3rd Road, Dalang Community, Xin'an Street, Bao'an District, Shenzhen, China Phone: 0755-86019782 Fax: 0755-86019782 E-Mail: ryan_yan@sdmctech.com

Shenzhen SDMC Technology Co.,Ltd. Room 1022, Floor 10, Building A, Customs Building,No. 2, Xin'an 3rd Road, Dalang Community, Xin'an Street, Bao'an District, Shenzhen, China Date: 2023-7-13 FCC ID: 2AW68-NP2035G Model Number: NP2035G To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Shenzhen SDMC Technology Co.,Ltd., declare that this EUT (FCC ID:

2AW68-NP2035G) doesnt have Ad Hoc mode function on non-US/Canada frequencies. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely,

(HHA EAD Name: Ryan Yan Company: Shenzhen SDMC Technology Co.,Ltd. Address: Room 1022, Floor 10, Building A, Customs Building,No. 2, Xin'an 3rd Road, Dalang Community, Xin'an Street, Bao'an District, Shenzhen, China Phone: 0755-86019782 Fax: 0755-86019782 E-Mail: ryan_yan@sdmctech.com

Shenzhen SDMC Technology Co.,Ltd. Room 1022, Floor 10, Building A, Customs Building,No. 2, Xin'an 3rd Road, Dalang Community, Xin'an Street, Bao'an District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-7-13 To whom it may concern:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AW68-NP2035G including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, FMEA ES) f\

Name: Ryan Yan Company: Shenzhen SDMC Technology Co.,Ltd. Address: Room 1022, Floor 10, Building A, Customs Building,No. 2, Xin'an 3rd Road, Dalang Community, Xin'an Street, Bao'an District, Shenzhen, China Phone: 0755-86019782 Fax: 0755-86019782 E-Mail: ryan_yan@sdmctech.com

Shenzhen SDMC Technology Co.,Ltd. Room 1022. Floor 10, Building A, Customs Building,No. 2, Xin'an 3rd Road, Dalang Community, Xin'an Street, Bao'an District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakiand Milis Road

-oiumbia, MD 21046 7/18/23 U.S. Agent Designation Shenzhen SDMG Technology Co.. Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2AW68-NP2035G):

Name and company of U.S. agent: ACT Lab LLC Physical U.S. address of agent: 3280 East 59th Street Long Beach, CA 90805 United States FRN of U.S. agent: 0033465568 Email address of U.S. agent: shuber@act-lab.com ACT Lab LLC acknowledges their obligation to accept service of process on behalf of Shenzhen SDMC Technology Co.., Ltd. Shenzhen SDMC Technology Co., Ltd. with the FRN (0029837143) accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). Sincerely. a Signature Ryan Yan Shenzhen SDMC Technology Co., Ltd. Signature ACT Lab LLC Senior Technical Director Mr Scott Huber The information provided in this letter is based on the referenced rule parts of Title 47 of the CPR as well as KDB 986446 Dot An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via ne sranung (CB.

Shenzhen SDMC Technology Co.,Ltd. Room 1022, Floor 10, Building A, Customs Building,No. 2, Xin'an 3rd Road, Dalang Community, Xin'an Street, Bao'an District, Shenzhen, China UNII Device Declaration Letter To whom it may concern:

We have declared below featured for FCC equipment authorization, Device FCC ID: 2AW68-NP2035G

(1) DFS Device:

Master N/A

(2) Active / Passive Scanning , adhoc mode access point capability Client with Radar detection capability __ Client without radar detection capability, Active Scanning passive scanning Frequency (the device can (where the device Ad Hoc Mode Access point Band (MHz) transmit a probe is can listen only capability capability

(beacon)) with no probes) - _ 5180-5240 Yes No x Yes No x Yes __ No Xx Yes __ No 5190-5230 & Yes |__| No x Yes | No | Yes | No Yes | | No 5210-5210 Xx Yes | _ No x Yes | __ No kX Yes | |. No > Yes |__| No 5260-5320 > Yes | | No Yes | _ No * Yes | __ No & Yes [| ~_ No 5270-5310 x Yes | No x Yes |__| No x Yes | __ No x Yes | |_| No 5290-5290 x Yes | __ No & Yes | | No & Yes | ~ No x Yes | _. No 5500-5720 > Yes _ No Xk Yes | __ No x Yes | __ No & Yes | __ No 5510-5710 Yes No * Yes No x Yes | _ No bk Yes |_| No 5530-5690 & Yes | _ No x Yes | 1. No x Yes | No | xX Yes | _| No 5745-5825 x Yes No Xx Yes No x Yes | ~ No x Yes | _ No 5755-5795 Xx Yes | | No & Yes | _ No es [| _ No kx Yes | ~.No 5775-5775 ~ Yes | _ No x Yes | L. No Yes No x Yes No

(3) Country code selection ability _ Yes *) No If yes, pls explain how it was implemented:

(4) Meet 15.202 requirement X Yes No pls check below :

A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices Aclient device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply &) Does not apply

(If apply, pls help to provide explanation on it was implement, and how software was controlled) Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, EH}

Name: Ryan Yan Company: Shenzhen SDMC Technology Co.,Ltd. Address: Room 1022, Floor 10, Building A, Customs Building,No. 2, Xin'an 3rd Road, Dalang Community, Xin'an Street, Bao'an District, Shenzhen, China Phone: 0755-86019782 Fax: 0755-86019782 E-Mail: ryan_yan@sdmctech.com