EBN (Energy) INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE Getting started Remove the product from the box. Remove any packaging from the product. Please retain all packaging after you have checked and counted all the parts and the contents against the list. Specs for products Bluetooth version + SPECSBluetooth V4.2+EDR Sensitivity-80dBm<0.1%BER Battery Specs3.7V/60mAH Charging voltageDC5V 500mA Charging timeAbout 1.5 hours Working current40mA Standby current<50uA Temperature range-40C to +85C Play timeAbout 2 hours Talk timeAbout 2 hours Standby timeAbout 30 hours Function description Turning On of device: Long press Turning off of deviceLong press Pairing status
, Voice prompt Power ON. Voice prompt Power Off. 1First time pairingBoot into pairing mode automaticallyVoice prompt the Bluetooth device is ready to pair. Equipment open Bluetooth connection interface option 2BOOM-EBN (Energy) clik connect. After the success of the matching voice prompt The Bluetooth device is connected successfully 2Re-pairingUnder off status long press blue LED flash alternately. 3For already connected device, Bluetooth headphone will automatically back to connect. Headphones into the matching status again. about 2 secondred and
/
/
Operation Guide Get through: Short press Hang up: In a call short press Replay the last phone number: Double-click Play/Pause Music: Short press Volume control to up and down: Long press Song switch to up and down : Short press LED Light status 1Charging status -----Long bright red light, full charged red light was off. 2Device on prompt-----Blue light on 3Pairing status-----Red and blue LED flash alternately 5Standby status-----Blue light flash 6Already connected status---Long bright blue light 7Play status-----Blue light bright 1 second and flash 1 time. Safety Instructions:
Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids. Do not operate the unit if it has been exposed to water, moisture or any other liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the unit. Do not use the unit if it has been dropped or damaged in any way. Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk. Do not use the unit with wet hands. Do not put objects into any of the openings. Keep the unit free from dust, lint etc. Do not use this unit for anything other than its intended use. Keep the unit out of reach of children. This product is not a toy. Do not use the handset at excessive volume levels, as damage to hearing may occur. FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.