FCC ID: 2BA67-ZQSMIC Wireless Microphone

Name: Wireless microphone Model number :ZQSMIC ZQSMIC The Wireless microphone Packing list 1. 2 microphone Microphone product description PILOT LAMP POWER 1.Install the No.5 battery 2.Press and hold to turn on the wireless microphone 3.Turn on the main speaker 4.The wireless microphone will automatically connect to the host computer

(The green light is always on when the connection is successful.The green light flashes slowly if the connection is not successful) 5.Turn on any wireless microphone, it can be automatically connected, two wireless microphones are turned on at the same time, automatic connection, both microphones can be used Product specification:

TX emission frequency: 2.402GHz-2.480GHz Audio dynamic range 85 db Audio Response: 20 Hz ~18 khz Low Distortion: < 5%

Battery:No.5 battery FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Page 1 of 1 FCC ID: 2BA67-ZQSMIC LABEL AND LOCATION Wireless Microphone Model: ZQS-Microphone FCC ID: 2BA67-ZQSMIC

(Size: L1.0cm x 0.5cm) Label Location Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster@lcs-cert.com | Web: www.lcs-cert.com Scan code to check authenticity

PLEASE PRINT ON COMPANY LETTERHEAD Section 2.911(d)(7) USA Agent for Service of Process Company name: SHENZHEN SING-E INTL DEVELOPMENT CO., LTD Address: 208, building a, maker center, Que Man Shan, Huarong Road, Gaofeng community, Dalang street, Longhua District, Shenzhen, China. Product Name: Wireless microphone FCC ID: 2BA67-ZQSMIC Rake ate. IAG Bian ok oo =

MOGEKS). LAS wicropngns 2.911(d)(7) USA Designated Agent for Service of Process We, SHENZHEN SING-E INTL DEVELOPMENT CO., LTD (the applicant) designate JBU GLOBAL LLC NOTE! for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Applicant Company name: JBU GLOBAL LLC Company name: SHENZHEN SING-E INTL USA Address: 21447 NE 2nd Place DEVELOPMENT CO., LTD Miami, FL 33179 Address: 208, building a, maker center, Que FRN Number: 0032680928 Man Shan, Huarong Road, Gaofeng Contact Name: Issac Grunwald community, Dalang street, Longhua District, Telephone No: 8442627464 Shenzhen, China. Email: issac@jbuglobal.net FCC Grantee Code: 2BA67 Contact Name: Vincent Liu Telephone No: 0755-89489689 Email: vincent@ising-e.cg he, Signature: Signature:

Titie: Chiet Operations Orticer Titie: Director of Saies Date: 2023-08-10 Date: 2023-08-10 NOTE 1: An applicant located in the United States may designate itself as t of process. Reference: Eadaral Danietar dace smeont 9N297_9A982 ederal Pogicter document 2022 feces PF httos:/Avww.federalregister.gov/documents/2023/02/06/2022-28263)) rotecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the od on 92/08/92 2.911 (d)(7)USA Agent v1.4 uae Gaarrmld sac Gana

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products:

FCC ID 2BA67-ZQSMIC Model name ZQS-Microphone, Bicanto C7 microphone, Cantando C2 microphone For the products listed above, we request permanent confidentiality for all applicable exhibits as there are:

the Operational Description the Block Diagram the Schematics The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-08-28 Name / Title: Vincent Liu / Sales Director & Co-Founder Company: Shenzhen Sing-E Intl Development Co., Ltd Address: 208, Bldg a, Maker center, Enterprise business network, Huarong Road, Dalang, Longhua, Shenzhen, China Phone: +86-18565678273 Fax: N/A E-Mail: vincent@ising-e.com

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commissions Rules (47 C.F.R.) we attest as follows:

We, applicant Company Name: Shenzhen Sing-E Intl Development Co., Ltd Address:

208, Bldg a, Maker center, Enterprise business network, Huarong Road, Dalang, Longhua, Shenzhen, China Phone: +86-18565678273 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-08-28 Name / Title: Vincent Liu / Sales Director & Co-Founder Company: Shenzhen Sing-E Intl Development Co., Ltd Address: 208, Bldg a, Maker center, Enterprise business network, Huarong Road, Dalang, Longhua, Shenzhen, China Phone: +86-18565678273 Fax: N/A E-Mail: vincent@ising-e.com

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commissions Rules (47 C.F.R.) we attest as follows for the product listed below:

FCC ID 2BA67-ZQSMIC We, applicant Model name ZQS-Microphone, Bicanto C7 microphone, Cantando C2 microphone Company Name: Shenzhen Sing-E Intl Development Co., Ltd Address:

208, Bldg a, Maker center, Enterprise business network, Huarong Road, Dalang, Longhua, Shenzhen, China Phone: +86-18565678273 certify that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-08-28 Name / Title: Vincent Liu / Sales Director & Co-Founder Company: Shenzhen Sing-E Intl Development Co., Ltd Address: 208, Bldg a, Maker center, Enterprise business network, Huarong Road, Dalang, Longhua, Shenzhen, China Phone: +86-18565678273 Fax: N/A E-Mail: vincent@ising-e.com

Shenzhen Sing-E Intl Development Co., Ltd 208, Bldg a, Maker center, Enterprise business network, Huarong Road, Dalang, Longhua, Shenzhen, China Date: 28 August, 2023 FCC ID: 2BA67-ZQSMIC Model Number: ZQS-Microphone, Bicanto C7 microphone, Cantando C2 microphone To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Shenzhen Sing-E Intl Development Co., Ltd hereby declare that our product (Wireless Microphone) Model Number: ZQS-Microphone, Bicanto C7 microphone, Cantando C2 microphone board, Schematic, Hardware version, Software version, structure and internal photos are same, named differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely,

(Signed) Name/Title: Vincent Liu / Sales Director & Co-Founder Company: Shenzhen Sing-E Intl Development Co., Ltd Address: 208, Bldg a, Maker center, Enterprise business network, Huarong Road, Dalang, Longhua, Shenzhen, China Tel: +86-18565678273 Fax: N/A E-Mail: vincent@ising-e.com