User manual Before use the equipment, please reading this instruction carefully!
Product: 433MHz remote control Model: RM433 Frequency band: 433MHz Parameters: 12VDC (powered by a non-rechargeable, type 27A battery) ATTENTION To comply with the published standards, the following must be observed when using this equipment. 1. The equipment intended to be operated up to 2000m above sea level. 2. The rated maximum ambient temperature must not exceed 45C. 3. Naked flame sources, such as candles, must not be placed on the appliance. 4. The equipment supply by a non-rechargeable battery, so dont charge for the battery!
5. When replace the battery please choose the type 27A battery, and the children should be supervision when replace the battery, it may cause choke hazard!
Operating instruction:
RM433 Icons 1. Install the specified battery to the equipment 2. Connected to end product which will be controlled by the equipment 3. The you can control the product according to the function figure of the button 1 / 4 Mounting step:
User manual The equipment have a support which could be mounting on the wall, please use suitable size screws or 3M adhesive tape to fixed on the wall. FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2 / 4 User manual Symbol interpretation:
This product must not be disposed together with the domestic waste. This product has to be disposed at an authorized place for recycling of electrical and electronic appliances. By collecting and recycling waste, you help save natural resources, and make sure the product is disposed in an environmental friendly and healthy way. For indoor use only Comply the EU directive CE requirements Comply the US directive FCC requirements Manufacturer name: Shenzhen Sonoff Technologies Co., Ltd. Address: Building 8, Room 1001, Lianhua industrial park, Longyuan Road, Hualian community, Longhua St, Longhua dist, Shenzhen, Guangdong, China. Website: https://sonoff.tech Importer name: xxx xxx Address: xxx xxx 3 / 4 User manual FCC Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 4 / 4