FCC ID: 2A8EE-M6 Wireless Smart Thermometer

Barbecue thermometer Wireless smart meat thermometer 1.Product Instrucons PROBE Host/Signal Ampliler AIBBQ APP Thank you for purchasing and using our wireless smart meat thermome-

ter.Please readthis manual carefully before using this product. BATTERY INSTRUCTIONS Please use a 5V household charger that meets the safety regulaons to charge the equipment. Fast charging is not supported. This device does not support charging while using lf the device is not used for a long me, please ensure that it is charged at least once every 3 months to prevent irreparable damage caused by excessive discharge of the baery 2.Product Specicaons Bluetooth Version 5.1 Intermal temperature:

-20~100 / -4~212 Ambient temperature:

0-300C/32~572F Probe charging me:

120min Host/Repeater Charging Time:2-3 hours Waterproof:IP 67(probe) APP name:AlLinkAIBBQ Wireless distance :

Max 300 feet Probe standby me:

24 hours Host/Repeater Charging Time:2-3 hours 3.Key seng Power Buon Connecon Iindicator Probe Baery Power lndicator Hub Baery Power lndicator Charging Dock User Manual One-third of the probe Probe parally exposed Exceeds probe graduaon line Direct to ames 5Choose the food that needs to be cooked 4Successfully connected to.Click Choose Food Choose the food 9.lmportant security informaon

- Use the probe only for the intended purpose. The probe is designed for meat (food).

- To prevent the risk of electric shock, do not immerse the charging block in water or other liquid.

- To avoid damage to the probe , the probe must be inserted into the safety line in the meat.

- In order to maintain the best performance of the product, please do not insert any part of the probe's ceramic handle into the meat.

- Do not use the probe in a microwave oven or pressure cooker

- Do not expose the wireless grill thermometer and probe directly toames.Do not drop the probe on hard surface.

- The probe cannot be washed in a dishwasher .Wash the probevith soap and water before and aer using by hand.

- When pung it back into the charger or the wireless grill thermometernake sure the probe is completely dry.

- The probe is waterproof, but it should not be immersed in water.Do not immerse in water for a long me.

- Please pay aenon to the p of the probe to avoid injury.

- During the cooking process or just aer cooking, the probe will be veryhot, please do not touch them with bare hands.

- Do not immerse the probe in cold water aer cooking. Wait unl theprobes cool down by itself before washing.

- The probe is not toy. Close supervi-

sion is required if you use the probe near children.

-Do not use this product outdoors in rain, thunderstorm or 6Start cooking, Food cooking compleon reminder Click A-Target Set environmental 8.Aenon!

In order to beer communicate with mobile phones and allow wireless transmission distance to be farther, please keep the host with in 10 feet of the cooker. Due to the high surface temperature of cooking equipment, please do not place the host directly on the surface of cooking equipment or in a high-temperature environment. The ambient temperature for safe use of the host is: - 20 to +85. The inseron method of the probe is related to the sensing temperature. The wrong inseron method will cause inaccurate temperature measurement or direct damage to the probe Ambient Temperature sensor Temperature Internal Sensor Pointed Tip 6.Download the APP Search the keyword "AIBBQ" in App Store or Google play or scan the following QR code. NOTE:The APP does not have a cloud server and will not collect personal informaon from users. Please rest assured to use it!

Ambientmax:

572/300 Ceramic Handle Safety Line 304 Stainless Stell Internal Max 212/100 4.Operang instrucons:

1Please place the probe on the hub before use and charge the hub unl the power indicator(Light No. 3 ) turns blue ;

2 Please charge the probe for more than 1 hour before use and it will work for at least 30 hours of acve use. 3The indicator light is red when the host is charging. and blue when fully charged. 4Press the power buon before use, when the light No. 3 is blue, it means the hub is fully charged. 5Undock the probe, you will hear a

"beep" from the hub, and the light No. 2 will ash blue within 3 seconds,

,indicang that the probe is connected. If the light No. 2 is not lit, the probe needs to be put back in the hub and removed unl it blinks blue. If the light No.2 ashes red, it means that the power of the probe is low and needs to be charged. 6Light No. 1 will ash blue aer the probe is removed and will turn a steady blue when connecng to app. 7Aer reaching the preset temperature, APP and hub will alarm at the same me. Press the power buon to turn o the alarm. 5.Connect to the app for use Place the hub near (but never in or on) the cooking appliance.The hub works quickest and most eciently if placed near the probe during cooking, especially if the probe is in a closed environment. iOS 11.0 and above 7.Install applicaons and connect devices. Turn on Bluetooth on your phone

(iOS system)The Android system must have both Bluetooth and locaon service enabled, as well as allow nocaon services. (Nocaon includes alarm sound and pop-up icon) 1.Turn on the device and open the APP

(AIBBQ) 2Open the APP and clickAdd Device 3Find the device This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions:

(1) This device may not cause harmful interference,

(2) This device must accept any interference received, indluding interference that maycause undesired operaon. FCC Radiaon Exposure Statement This equipment complies with FCC radiaon exposure limits set forth for an uncontrolled environment. WEEE Compliance Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in countries with separate collecon systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human ,health fom uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government oce, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the tems and condions of the purchase contract This product and its electronic accessories should not be mixed with other commerDcial wastes for disposal. other severe weather condions. Common Q&A and Precauons:

1.Open the APP, when the probe is put back into the box for a few seconds and then take it out, if the APP can't automacally search for the charging box and the probe (which has been connected before), please manually click on the circle icon on the APP to refresh it. 2. 3 seconds interval is needed between taking out the probe from the charging box and pung it back quickly, to avoid the slow response of the program causing failure to connect to the phone. 3. Long press the buon for 8s, the charging box device is forced to restart. 4. Baery with NTC funcon can be charged at -10~50. If beyond the range, it will stop charging. 5. When the temperature of the probe reaches 100, the charging box buzzer will connue to alarm. LED light indicaon descripon:

1. a charging box baery indicator:

red and blue color. 2. When the buon is pressed, the charging case shows red light if there is no power; the charging case shows blue light if there is power. Press the key, the light is o. 3. When the charging case is connected to type c external charging, it shows red light, and when it is full, it shows blue light. Remove charging, the light is o. 4. A probe connecon and baery indicator: red and blue. 4.1 Aer the probe is connected aer the power is turned on, if the pin power is too low, it shows red blinking. If the power level is normal, the display ashes blue (lasng 100ms/interval 2S). The light will be o when the probe is disconnected. 4.2 When the probe is put into the charging box for charging, the light is o. 5. A charging case Bluetooth connecon indicator: blue. 5.1 Put the probe out of the charging box, 3S later if don't be connected aer 3 seconds, the blue light ashes, if connected, the light is always on. The light will be o aer power o. FCC statement Any changes or modicaons not expressly approved by the party responsible for compliance could void the user' s authority to operate the equipment. FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2A8EE-M6 Page 1 of 1 Report No.: CTL2306202061-WF FCC ID Label Information Label location:

Wireless Smart Thermometer Model: M6 FCC ID: 2A8EE-M6

Shenzhen Sulang Technology Co.,ltd Area C, 18th Floor, Building 12, Lehui Science and Technology Innovation Center, No. 489 Jihua Road, Bantian Community, Longgang District, Shenzhen City, China Date2023/11/21 Product Model Number: M6, M7, M8, M9, M10, MY03, MY05, MY06, MY07, MY08, MY09, MY12, MY13, BQ05, BQ06, BQ07, BQ08, BQ09, BQ10, BQ12, BQ13 FCC ID2A8EE-M6 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:

Testing Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By:

Contact Listed on FCC Wesbite Title: Manager Email: xiangmugongcheng@sl-sulang.com Telephone: 13510920752 On behalf of: Shenzhen Sulang Technology Co.,ltd Effective Date: April 2, 2020 Revision Date:

QSF 7.6.4-8 Agent Authorization Letter Template Revision: 0 Page 1 of 1

Shenzhen Sulang Technology Co.,ltd Address: Area C, 18th Floor, Building 12, Lehui Science and Technology Innovation Center, No. 489 Jihua Road, Bantian Community, Longgang District, Shenzhen City, China Date: 2023-11-29 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing SUBJECT: FCC Application for FCC ID: 2A8EE-M6 To Whom It May Concern:

Shenzhen Sulang Technology Co.,ltd certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature:

Date: 2023-11-29

Shenzhen Sulang Technology Co.,ltd Address: Area C, 18th Floor, Building 12, Lehui Science and Technology Innovation Center, No. 489 Jihua Road, Bantian Community, Longgang District, Shenzhen City, China Date: 2023-11-29 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing SUBJECT: FCC Application for FCC ID: 2A8EE-M6 To Whom It May Concern:

Shenzhen Sulang Technology Co.,ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Signature:

Date: 2023-11-29

Shenzhen Sulang Technology Co.,ltd Area C, 18th Floor, Building 12, Lehui Science and Technology Innovation Center, No. 489 Jihua Road, Bantian Community, Longgang District, Shenzhen City, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A8EE-M6 To Whom It May Concern, Date: November 29, 2023 Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Shaw xiao Title: Manager

Shenzhen Sulang Technology Co.,ltd Area C, 18th Floor, Building 12, Lehui Science and Technology Innovation Center, No. 489 Jihua Road, Bantian Community, Longgang District, Shenzhen City, China Series Models Description To whom it may concern:

The device (Product Name: Wireless Smart Thermometer ) Models Name: M6, M7, M8, M9, M10, MY03, MY05, MY06, MY07, MY08, MY09, MY12, MY13, BQ05, BQ06, BQ07, BQ08, BQ09, BQ10, BQ12, BQ13 have same electrical, PCB and BOM, only the models name and colour are different for marketing requirements. Sincerely, Shaw xiao Phone: 13510920752 e-mail: xiangmugongcheng@sl-sulang.com Dated: 11/29/2023

Shenzhen Sulang Technology Co.,ltd U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Baihetian Innovative Solutions FRN: 0033401605 Contact Name: Kenneth Young Street Address: 6837 Chase Rd City/Province/Zip: Dearborn, MI 48126 Telephone No: 313-395-3113 Email: ken.young@baihetiansolutions.com This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature:

Date: Nov. 29, 2023 Signed by (Printed Name/Title): Kenneth Young/Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Shenzhen Sulang Technology Co.,ltd Grantee Code: 2A8EE FCC ID: 2A8EE-M6 Contact Name: Shaw xiao Street Address: Area C, 18th Floor, Building 12, Lehui Science and Technology Innovation Center, No. 489 Jihua Road, Bantian Community, Longgang District, Shenzhen City, China City/Province/Zip: China Telephone No: 13510920752 Email: xiangmugongcheng@sl-sulang.com Applicant Signature:

Date: 2023.11.29 Signed by (Printed Name/Title): Shaw xiao / Manager