FH1206 High Power Wireless AC1200 Dual Band Router User Manual part 4 of 4

High Power Wireless AC1200 Dual Band Router Click Change adapter settings . Click Local Area Connection and select Properties. 116 High Power Wireless AC1200 Dual Band Router Select Internet Protocol Version 4 (TCP/IPv4) and click Properties. 117 High Power Wireless AC1200 Dual Band Router Select Obtain an IP address automatically and click OK. 118 High Power Wireless AC1200 Dual Band Router Click OK on the Local Area Connection Properties window to save your settings. 119 High Power Wireless AC1200 Dual Band Router Windows XP Right-click My Network Places and select Properties. Right click Local Area Connection and select Properties. 120 High Power Wireless AC1200 Dual Band Router Select Internet Protocol Ver sion 4 (TCP/IPv4) and click Properties. 121 High Power Wireless AC1200 Dual Band Router Select Obtain an IP address automatically and click OK. 122 High Power Wireless AC1200 Dual Band Router Click OK on the Local Area Connection Properties window to save your settings. 123 High Power Wireless AC1200 Dual Band Router Appendix 2 Join Your Wireless Network Ti p -------------------------------------------------------------

To join your wireless network, the PC you use must have an installed wireless network adapter. If not, install one.

Join Your Wireless Network - Windows 7 Click Start -> Control Panel. 124 High Power Wireless AC1200 Dual Band Router Click Network and Internet . Click Network and Sharing Center . 125 High Power Wireless AC1200 Dual Band Router Click Change adapter settings . Right click the Wireless Network Connection and select Connect/Disconnect . 126 High Power Wireless AC1200 Dual Band Router Select the wireless network you wi sh to connect and click Connect. Depending on whether you are joining a secured or unsecured wireless network, you will see different screens:

A. If you are joining an unsecured wireless network as seen below:

B. If you are joining a secured wireless net work as seen below:

127 High Power Wireless AC1200 Dual Band Router You are required to enter a sec urity on the following screen. Enter the security key and click OK. When you see Connected displayed next to the wireless network you selected, you have connected to the wireless network successfully. 128 High Power Wireless AC1200 Dual Band Router Appendix 3 Factory Default Settings Item Default Settings Router Login Login IP Address 192.168.0.1 Internet Connection Type MAC Address Network Settings MTU DHCP Fi nd i t o n t h e l ab el at t ach ed to t h e bo tt o m o f yo u r d evi ce. PPPoE: 1450 Dynamic IP : 1450 Static IP : 1450 LAN Settings WAN Speed Auto-negotiation DNS IP Address Subnet Mask DHCP Server IP Pool Time Zone Disabled 192.168.0.1 255.255.255.0 Enabled 192.168.0.100~192.168.0.200

(GMT+08:00)Beijing, Chongquing, Hong Kong, Urumq Set Time and Date manually Wireless Disabled Enabled Primary SSID

(Network Name) Tenda_XXXXXX

(XXXXXX is the last six characters in the device's MAC address) Wireless Extender Disabled Network Mode 11b/g/n mixed SSID Broadcast Wireless Settings AP Isolation Channel Channel Bandwidth Extension Channel WMM Capable APSD Capable Security Mode WPS Remote Web Tools Management Enabled Disabled Auto 20/40 Auto Enabled Disabled None Disabled Disabled Login P assword None Bandwidth Control Disabled Others Traffic Statistics DMZ Host Disabled Disabled 129 High Power Wireless AC1200 Dual Band Router UPnP Security Enabled Disabled 130 High Power Wireless AC1200 Dual Band Router Appendix 4 FAQs This section provides solutions to problems that may occur during installation and operation of the device. Read the following if you are running into problems. If your problem is not covered here, pl ease fe el fre e to go to www.ten dacn.com to find a solution or emai l your problems to: sup port@tenda .com.cn or support02@te nda.com.cn. We wi ll be more than happ y to help you out as soon as possi ble. 1. Q: I cannot access the device's management interface. What should I do?

Make sure the power LED on the device's front panel is on and the SYS LED blinks normal ly. Make sure all cables are correctly connected and the corresponding LAN LED on the device is on. Verify that your PC's TCP/IP settings are configured correctly. If you select the "Use the following IP address" option, set your PC 's IP address to any IP address between 192.168.0.2~192.168.0.254. Or you can select the

"Obtain an IP address automatically" option. Check the IP address you entered in your browser. It should be http://192.168.0.1. Open your browser and click Tools -> Internet Options -> Connections

-> LAN settings, uncheck the Use a proxy server for your LAN option. Press the WPS/RST button for over 7 seconds to restore your device to factory default settings. Then log to your device again. 2. Q: I changed the login password and unfortunately forget it. What should I do?

Press the WPS/RST button for over 7 seconds to restore your device to factory default settings. 3. Q: My computer shows an IP address conflict error after having connected to the device. What should I do?

Make sure there are no other DHCP servers on your LAN or other DHCP servers are disabled. 131 High Power Wireless AC1200 Dual Band Router Make sure the device's LAN IP is not used by other devices on your LAN. The device's default LAN IP address is 192.168.0.1. Make sure the statically assigned IP addresses to the PCs on LAN are not used by others PCs. 4. Q: I have problems connecting to Internet/Secure websites do not open or displays only part of a web page. What should I do?

This problem mainly happens to users who use the PPPoE or Dynamic IP Internet connection type. You need to change the MTU size. Try changing the MTU to 1450 or 1400. If this does not help, gradually reduce the MTU from the maximum value until the problem disappears. 132 High Power Wireless AC1200 Dual Band Router Appendix 5 Remove Wireless Network from Your PC If you change wireless settings on your wireless device, you must remove them accordingly from your P C; otherwise, you may not be able to wirelessly connect to this device. Below describes how to do remove a wireless network from your P C. Windows 7 Right-click the Network icon and select Properties. Select Manage Wireless Networks . 133 High Power Wireless AC1200 Dual Band Router Select the wireless network and click Remove network. Windows XP Right-click My Network Places and select Properties. 134 High Power Wireless AC1200 Dual Band Router Right click Wireless Network Connection and then select Properties. 135 High Power Wireless AC1200 Dual Band Router Click Wireless Networks, select the wireless network name under Preferred networks and then click the Remove button. 136 High Power Wireless AC1200 Dual Band Router Appendix 6 Safety and Emission Statement CE Mark Warning This is a Class B product in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures NOTE:(1)The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification s to this equipment.(2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable FCC Statement This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation . If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or re locate the receiving antenna. 137 High Power Wireless AC1200 Dual Band Router

Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV techn ician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co -located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiat or & your body. NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable 138