all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual Part 1 | Users Manual | 2.15 MiB | February 04 2014 / March 04 2014 | |||
1 |
|
User Manual Part 2 | Users Manual | 2.53 MiB | February 04 2014 / March 04 2014 | |||
1 | Cover Letter(s) | February 04 2014 / March 04 2014 | ||||||
1 | Cover Letter(s) | February 04 2014 / March 04 2014 | ||||||
1 | External Photos | February 04 2014 / March 04 2014 | ||||||
1 | Internal Photos | February 04 2014 / March 04 2014 | ||||||
1 | ID Label/Location Info | February 04 2014 / March 04 2014 | ||||||
1 | RF Exposure Info | February 04 2014 / March 04 2014 | ||||||
1 | Cover Letter(s) | February 04 2014 / March 04 2014 | ||||||
1 | Test Report | February 04 2014 / March 04 2014 | ||||||
1 | Test Setup Photos | February 04 2014 / March 04 2014 |
1 | User Manual Part 1 | Users Manual | 2.15 MiB | February 04 2014 / March 04 2014 |
3G/4G Wireless Router User Guide I 3G/4G Wireless Router User Guide Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co., Ltd. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co., Ltd. No part of this publication can be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the prior written permission of Shenzhen Tenda Technology Co., Ltd. If you would like to know more about our product information, please visit our website at http://www.tendacn.com. Disclaimer Pictures, images and product specifications herein are for references only. To improve internal design, operational function, and/or reliability, Tenda reserves the right to make changes to the products described in this document without obligation to notify any person or organization of such revisions or changes. Tenda does not assume any liability that may occur due to the use or application of the product or circuit layout(s) described herein. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information and recommendations in this document do not constitute the warranty of any kind, express or implied. I 3G/4G Wireless Router User Guide Preface Thank you for choosing Tenda ! Please read this user guide before you start! This user guide instructs you to install and configure your device. This user guide applies to 4G300, 4G301 and 4G302. The 4G301 is used as an example throughout this user guide. This user guide uses the following formats to highlight special messages:
Icon Description This format is used to highlight information of importance or special interest. Ignoring this type of note may result in ineffective configurations, loss of data or damage to device. This format is used to highlight a procedure that will save time or resources. Description of fields on the device GUI. Note Tip Knowledge Center Technical Support Website: http://www.tendacn.com Email: support02@tenda.com.cn Skype: tendasz YouTube: Tendasz1999 Hotline:
1-800-570-5892 (USA) (061) 1300787922 (Australia)
(044)197-780-6119 (UK) (0852)36120883 (Hong Kong)
(064) 800787922 (New Zealand) II 3G/4G Wireless Router User Guide Table of Contents Copyright Statement........................................................................................................................................... I Disclaimer ............................................................................................................................................................. I Preface ................................................................................................................................................................. II This user guide uses the following formats to highlight special messages: ......................................................... II Technical Support ................................................................................................................................................ II Table of Contents ............................................................................................................................................. III I Product Overview ............................................................................................................................................ 1 1 Package Contents.............................................................................................................................................. 1 2 Getting to know your router ............................................................................................................................. 1 2.1 LED ............................................................................................................................................................ 1 2.2 Button & Interface ..................................................................................................................................... 3 2.3 Label .......................................................................................................................................................... 2 II Quick Internet Setup ...................................................................................................................................... 3 1 Getting Prepared ............................................................................................................................................... 3 2. Hardware Install .............................................................................................................................................. 4 2.1 Charging Router ......................................................................................................................................... 4 2.2. Hardware Install ........................................................................................................................................ 4 3 Connect to Router ............................................................................................................................................. 7 3.1 Connect to Device Wirelessly .................................................................................................................... 7 3.2 Connect to Device Using an Ethernet Cable ............................................................................................ 12 4 Smart Mode (Auto-switch between 3GRouter and Wireless Router Mode) ................................................... 12 5 Manual Internet Setup .................................................................................................................................... 13 5.1 Web Login ................................................................................................................................................ 13 5.2 Manual Internet Setup& Wireless Security Setup .................................................................................... 15 III Features & Configurations ........................................................................................................................ 25 1 Status .............................................................................................................................................................. 25 1.1 WAN Status .............................................................................................................................................. 26 1.2 LAN Status............................................................................................................................................... 27 1.3 Wireless Status ......................................................................................................................................... 27 1.4 System Status ........................................................................................................................................... 28 2 Basic Settings ................................................................................................................................................. 28 2.1 LAN Settings ........................................................................................................................................... 29 2.2 WAN Settings........................................................................................................................................... 30 2.3 WAN Speed .............................................................................................................................................. 36 2.4 DNS Settings ............................................................................................................................................ 37 2.5 MAC Clone .............................................................................................................................................. 38 III 3G/4G Wireless Router User Guide 2.6. DHCP ...................................................................................................................................................... 39 2.7 DHCP Client List ..................................................................................................................................... 40 3 Wireless Settings ............................................................................................................................................ 42 3.1 Wireless-Basic ......................................................................................................................................... 42 3.2 Wireless Security ..................................................................................................................................... 44 3.3 Access Control ......................................................................................................................................... 45 3.4 Connection Status .................................................................................................................................... 47 4 Security ........................................................................................................................................................... 47 4.1 Client Filter .............................................................................................................................................. 48 4.2 MAC Filter ............................................................................................................................................... 51 4.3 URL Filter ................................................................................................................................................ 54 4.4 Remote Web Management ....................................................................................................................... 56 5 Advanced Applications ................................................................................................................................... 58 5.1 DDNS ...................................................................................................................................................... 58 5.2 Port Forwarding ....................................................................................................................................... 60 5.3 DMZ Host ................................................................................................................................................ 63 5.4 UPNP ....................................................................................................................................................... 64 5.5 Route Table .............................................................................................................................................. 65 6 Bandwidth Control ......................................................................................................................................... 65 7 Tools ............................................................................................................................................................... 67 7.1 Time& Date .............................................................................................................................................. 67 7.2 Firmware Upgrade ................................................................................................................................... 69 7.3 Backup & Restore .................................................................................................................................... 71 7.4 Restore to Factory Default Settings ......................................................................................................... 74 7.5 Change Password ..................................................................................................................................... 75 7.6 Logs ......................................................................................................................................................... 76 7.7 Reboot ...................................................................................................................................................... 76 IV Appendix ........................................................................................................................................................ 77 1 Configure PC TCP/IP Settings ....................................................................................................................... 77 Windows 7 ..................................................................................................................................................... 77 Windows XP .................................................................................................................................................. 83 2 FAQs ............................................................................................................................................................... 86 3 Factory Default Settings ................................................................................................................................. 87 4 Remove Wireless Network from Your PC ...................................................................................................... 88 Windows 7 ..................................................................................................................................................... 88 Windows XP .................................................................................................................................................. 90 5 Safety and Emission Statement ...................................................................................................................... 92 IV I Product Overview I Product Overview 1 Package Contents Unpack the package. Your box should contain the following items:
If any of the parts are incorrect, missing, or damaged, contact your Tenda dealer. Keep the carton, including the original packing materials, in case you need to return the product for repair. 2 Getting to know your router 2.1 LED 4G300 1 I Product Overview LED Status Description Battery Meter Red The amount of electrical energy capacity is less than 20%
Light Green The amount of electrical energy capacity is more than 20%
Dark Green The device is charging Blue The unit is fully charged up 4G301 LED Status Description Battery Meter Red The power level is very low Green Display real-time level of power capacity System LED Blinking The unit is starting up Solid The unit is functioning correctly 4G302 2 I Product Overview LED Status Description Battery Meter Red The power level is very low Green Display real-time level of power capacity System LED Blinking The unit is starting up Solid The unit is functioning correctly 2.2 Button & Interface 4G300 3 I Product Overview Button/Interface Description Micro USB For charging the unit via a USB cable USB For connecting to a 3G/4G Modem or charging a terminal device
(such as iPad, iPhone) ON/OFF Switch Power button to turn the unit on or off. The unit functions as a 3G/4G wireless router when turned on or a power bank when turned off Reset Pressing it with a needle for about 10 seconds resets the unit to the factory defaults RJ45 Functions as a LAN port for connecting to a PC or switch in 3G/4G router mode and WISP mode. In other modes, this port functions as a WAN port for connecting to ISP 4 I Product Overview 4G301 Button/Interface Description Micro USB Port For charging the unit via a USB cable USB For connecting to a 3G/4G Modem or charging a terminal device
(such as iPad, iPhone) ON/OFF Switch Power button to turn the unit on or off. The unit functions as a 3G/4G wireless router when turned on or a power bank when turned off Battery Meter Press it to view power level Reset Pressing it with a needle for about 10 seconds resets the unit to the factory defaults RJ45 Functions as a LAN port for connecting to a PC or switch in 3G/4G router mode and WISP mode. In other modes, this port functions as a WAN port for connecting to ISP 1 I Product Overview 4G302 Button/Interface Description Micro USB For charging the unit via a USB cable USB For connecting to a 3G/4G Modem or charging a terminal device
(such as iPad, iPhone) ON/OFF Switch Power button to turn the unit on or off. The unit functions as a 3G/4G wireless router when turned on or a power bank when turned off Battery Meter Press it to view power level Reset Pressing it with a needle for about 10 seconds resets the unit to the factory defaults RJ45 Functions as a LAN port for connecting to a PC or switch in 3G/4G router mode and WISP mode. In other modes, this port functions as a WAN port for connecting to ISP 1 I Product Overview 2.3 Label 1Product Model 2Default Login IP address. This IP address is to be used to access the routers settings through a web browser. If you change it, you have to open a new connection to the new IP address and log in again. 3Default login password 4Default wireless network name (SSID). 2 II Quick Internet Setup II Quick Internet Setup 1 Getting Prepared Before you start the installation process, you need to prepare the following:
Item Router PC Description Find it in your package Should have a installed IE8 or higher browser DHCP, PPPoE or Static IP Internet Connection Type:
1. Ethernet Cable from the incoming Internet side: This is provided by your ISP 2. ISP Information: Your Internet service provider (ISP) should have provided you with all of the information needed to connect to the Internet. If you cannot locate this information, ask your ISP to provide it If your ISP uses a PPPoE Internet connection, you will need ISP login name and password If you use a DHCP Internet connection, no information is needed connection, you will need to gather the following information:
If your ISP gives you a fixed or static IP address for Internet Gather ISP Information 1) IP Address 2) Subnet Mask 3) Gateway 4) DNS Server 5) Alternate DNS Server (Optional) 3G/4G Internet Connection:
1. 3G/4G Modem: For 3G/4G Internet connection, you need to buy a 3G/4G modem 2. 3G/4G ISP Information: Your Internet service provider (ISP) should have provided you with all of the information needed to connect to the Internet. If you cannot locate this information, ask your ISP to provide it 3. Ethernet Cable: This can be found in the product package. You will need it to connect your PC to this device WISP Internet Access:
1. Remote AP's SSID, MAC address, security mode, cipher type and security key 2. Internet connection information provided by the remote AP 3. Ethernet Cable: This can be found in the product package. You will need it to connect your PC to this device 3 II Quick Internet Setup 2. Hardware Install 2.1 Charging Router Turn on the router and check the power level indicator LED. (For LED description, see LED) It is advisable to fully charge up the device if the amount of electrical energy capacity is less than 20%. Charge Method:
Note----------------------------------------------------------------------------------------------------------------------
Please use the USB cable that comes in the package to charge this device. Using a different USB cable might cause damage to this device. 2.2. Hardware Install Select a hardware install method according to your environment. A. If you access Internet by connecting to the Ethernet cable from the incoming Internet side, see DHCP, PPPoE & Static IP to install hardware. B. If you access Internet via a 3G or 4G modem, see 3G Router Mode to install hardware. C. If you acquire Internet access from your WISP AP or a wireless Access Point on an existing network see WISP Mode to install hardware. DHCP, PPPoE & Static IP In this mode, the RJ-45 port on this device functions as a WAN port. You must connect to this device wirelessly. 4 II Quick Internet Setup Tip-----------------------------------------------------------------------------------------------------------------------------------------
If you want to access and configure this device via a wired connection, simply attach a 3G modem to its USB port and system will automatically switch to the 3G Router mode. The RJ45 port will then function as a LAN port so that you can connect to it using an Ethernet cable. Set up Internet connection and secure your wireless network and then reconnect to this device. 3G/4G Router Mode In this mode, the RJ-45 port on this device functions as a WAN port. You can connect to this device using an Ethernet cable. 5 II Quick Internet Setup 6 II Quick Internet Setup WISP Mode In this mode, the RJ-45 port on this device functions as a WAN port. You can connect to this device using an Ethernet cable. 3 Connect to Router In the Wireless Router (DHCP, PPPoE, Static IP) mode, clients (such as computers, smart phones and tablets) can only connect to this device wirelessly for sharing Internet access. In the WISP mode or 3G Router mode, computers, smart phones and tablets can access and connect to this device either wirelessly or using an Ethernet cable. 3.1 Connect to Device Wirelessly Tip------------------------------------------------------------------------------------------------------------------------
1. The device's SSID is "Tenda_xxxxxx" by default (You can find it on the attached label). 2. If you secure your wireless network, you must use the security key to join it. 3. To join your wireless network, the PC you use must have an installed wireless network adapter. If not, install one. 7 II Quick Internet Setup Windows 7 Click the icon on the notification area on the bottom right corner. Select the wireless network you wish to connect and click Connect. 8 II Quick Internet Setup If you see the screen below, you are connecting to the wireless network. Enter the security key and click OK. When you see Connected displayed next to the wireless network you selected, you have connected to the wireless network successfully. 9 II Quick Internet Setup Windows XP Right click My Network Places from your PC's desktop and select Properties. Right click Wireless Network Connection and select View Available Wireless Networks. 10 II Quick Internet Setup Double click the wireless network you wish to connect. Enter the security key and click Connect. 11 II Quick Internet Setup When you see Connected displayed next to the wireless network you selected, you have connected to the wireless network successfully. 3.2 Connect to Device Using an Ethernet Cable If your computer is set to a static or fixed IP address (this is uncommon), change it to "Obtain an IP address automatically" and "Obtain DNS server address automatically" from the device. 4 Smart Mode (Auto-switch between 3GRouter and Wireless Router Mode) The device is preset to operate in the smart mode by default. Depending on whether there is an available 3G modem, system automatically switches to a) 3G Router mode (in the presence of a 3G modem); clients can share Internet access either through a wireless or wired connection to the device. There is no need for additional configurations!
or b) Wireless Router mode (in the absence of a 3G modem): in the wireless router mode 12 II Quick Internet Setup and automatically detects and switches between PPPoE and DHCP. If you use the DHCP
(Dynamic IP) connection type, you can simply access Internet via a wireless connection to this device, or if you use PPPoE, access this device wirelessly and then set up Internet. See PPPoE. When you first time open a web page after successfully connecting to Internet, you will be prompted to customize a wireless security key to secure your wireless network. Simply follow the onscreen instructions there. Tip-------------------------------------------------------------------------------------------------------------------------
This device can automatically detect and switch among the DHCP, PPPoE and 3G router mode depending on the actual environment. If the Auto-switch feature is disabled, the device will automatically detect and switch to the right Internet connection type in case of an Internet connection failure. 5 Manual Internet Setup Read this section only when you fail to access Internet after you have tried the above mentioned steps or you can access Internet and want to change the SSID (wireless network name) and security key of this device. 5.1 Web Login Launch a web browser, say, IE. In the address bar, input 192.168.2.1, and press "Enter". 13 II Quick Internet Setup Enter the login password and click Login. The default password is admin. You will come to the setup wizard interface. Here you can quickly set up Internet. Tip-------------------------------------------------------------------------------------------------------------------------------------------
1. If you access Internet by connecting to the Ethernet cable from the incoming Internet side, see Static IP. 2. If you don't want to use the Auto-switch feature, check the Disable Auto-switch mode box. 3. You can also enable the Auto-switch mode feature after you manually set up Internet and your wireless network so that your router can fit different environment, eliminating manual intervention. 14 II Quick Internet Setup 5.2 Manual Internet Setup& Wireless Security Setup Read the following and determine your Internet connection type. Then follow the right setup wizard. A. If your ISP provides you with an Ethernet cable from the incoming Internet side but no ISP login account or IP information, your ISP uses a DHCP connection. See DHCP. B. If your ISP provides you with an Ethernet cable from the incoming Internet side and ISP login account, your ISP uses a PPPoE connection. See PPPoE. C. If your ISP provides you with an Ethernet cable from the incoming Internet side IP information
(IP address, subnet mask, gateway IP address, DNS server address), your ISP uses a static IP connection. See Static IP. D. If you access Internet via a 3G or 4G modem, see 3G/4G Router Mode. E. If you acquire Internet access from your WISP AP or a wireless Access Point on an existing network, see WISP Mode. 15 II Quick Internet Setup DHCP Select Hotel Mode: Dynamic IP and click Next. Configure your wireless network: SSID, channel, security settings and then click Next. SSIDTenda_762038 Channel: 6 Security Mode: WPA-PSK Cipher Type: AES Security Key: Myrouter 16 II Quick Internet Setup MAC Clone Setup: Enter the computer or broadband modem authorized by your ISP. Then click Next. Click Finish and wait for the device to restart automatically. After reboot, reconnect to this device wirelessly and you will be able to access Internet. Tip-------------------------------------------------------------------------------------------------------------------------
Upon successful configuration, the RJ-45 port on the device functions as a WAN port and clients must only access the device wirelessly. 17 II Quick Internet Setup PPPoE Select Residence Mode: PPPoE and click Next. Configure your wireless network: SSID, channel, security settings and then click Next. SSIDTenda_762038 Channel: 6 Security Mode: WPA-PSK Cipher Type: AES Security Key: Myrouter 18 II Quick Internet Setup Internet Setup & MAC Clone: Enter your ISP login user name and password (case sensitive) and the MAC address of the computer or broadband modem authorized by your ISP. Then click Next. Click Finish and wait for the device to restart automatically. After reboot, reconnect to this device wirelessly and you will be able to access Internet. Tip-------------------------------------------------------------------------------------------------------------------------
Upon successful configuration, the RJ-45 port on the device functions as a WAN port and clients must only access the device wirelessly. 19 II Quick Internet Setup 3G/4G Router Mode Tip-------------------------------------------------------------------------------------------------------------------------
In this mode, you only need to configure the router. No additional configurations are required on the 3G/4G modem. Select 3G/4G Router Mode and click Next. Select your 3G ISP and click Next. 20 II Quick Internet Setup Configure your wireless network: SSID, channel, security settings and then click Next. SSIDTenda_762038 Channel: 6 Security Mode: WPA-PSK Cipher Type: AES Security Key: Myrouter Click Finish and wait for the device to restart automatically. After reboot, reconnect to this device wirelessly or using an Ethernet cable and you will be able to access Internet. Tip-------------------------------------------------------------------------------------------------------------------------
Upon successful configuration, the RJ-45 port on the device functions as a LAN port and clients can access the device either wirelessly or via a wired connection. 21 II Quick Internet Setup WISP Select WISP Mode: WISP and click Next. WISP Setup: Enter or specify the SSID, MAC, channel, security settings provided by your WISP and then click Next. 22 II Quick Internet Setup Configure your wireless network: SSID and security settings and then click Next. SSIDTenda_762038 Security Mode: WPA-PSK Cipher Type: AES Security Key: Myrouter Tip-------------------------------------------------------------------------------------------------------------------------------------------
In WISP mode, your wireless network must be set to operate on the same channel as your WISP AP. Internet Setup: Configure the Internet connection settings and then click Next. If you are unsure, consult your WISP. 23 II Quick Internet Setup Click Finish and wait for the device to restart automatically. After reboot, reconnect to this device wirelessly or using an Ethernet cable and you will be able to access Internet. Tip-------------------------------------------------------------------------------------------------------------------------
Upon successful configuration, the RJ-45 port on the device functions as a LAN port and clients can access the device either wirelessly or via a wired connection. 24 III Features & Configurations III Features & Configurations 1 Status This section includes the following:
WAN Status LAN Status Wireless Status System Status Click Status to enter the page. 25 III Features & Configurations 1.1 WAN Status WAN Status in Wireless Router Mode & WISP Mode (WISP Client Router Mode):
WAN Status in 3G/4G Router Mode:
Tip--------------------------------------------------------------------------------------------------------------------------------------------
IP Address/Subnet Mask/WAN subnet mask/Gateway/Primary DNS Server/Secondary DNS Server: This type of information appears only if the router successfully connects to Internet via a PPPoE or DHCP (dynamic IP) connection. However if you connect the router to Internet with static IP settings provided by your ISP, these fields will display the settings you entered whether the router successfully connects to the Internet or not. If nothing appears in the secondary DNS server field, there is no available secondary DNS server. 26 III Features & Configurations 1.2 LAN Status 1.3 Wireless Status 27 III Features & Configurations 1.4 System Status Knowledge Center ----------------------------------------------------------------------------------------------
1. WAN MAC Address: The devices current WAN MAC address. 2. System Time: Current system time on this device. The device automatically synchronizes the system time with Internet time servers. 3. Up Time: Displays the time duration indicating how long the router has been up since startup. Up time is recounted and renewed upon poweroff. 4. Connected Clients: Displays the number of DHCP clients. 2 Basic Settings This section includes the following:
LAN Setup WAN Setup WAN Speed DNS Settings MAC Clone DHCP Server DHCP Client List To change the device's login IP address, see LAN Setup. 28 III Features & Configurations To set up Internet, see WAN Setup. To set up speed and duplex mode for the WAN port, see WAN Speed Setup. To configure DNS server, see DNS Setup. To clone MAC address, see MAC Clone. To configure DHCP server, see DHCP Server. To assign static IP addresses and view LAN device information, see DHCP Client List. 2.1 LAN Settings Here you can configure the LAN IP Address and Subnet Mask. This IP address is to be used to access the devices settings through a web browser. Be sure to make a note of any changes you apply to this page. Tip-------------------------------------------------------------------------------------------------------------------------------------------
1.Default IP address and subnet mask are respectively 192.168.2.1 and 255.255.255.0. 2. Be sure to make a note of any changes you apply to this page. If you change the LAN IP address of the router, you have to open a new connection to the new IP address and log in again. Also, you have to set the default gateway addresses of all LAN PCs to this new IP address. 3. The router's LAN IP address and WAN IP address cannot be on the same IP segment. If not, the router will not be able to access Internet. Configuration Procedures:
Change the IP address to the one you wish to use, for example, 192.168.10.1. Click Save to save your settings. 29 III Features & Configurations 2.2 WAN Settings Click Basic -> WAN Setup to configure your Internet connection settings. 3G/4G Router Mode Configuration Procedures:
Country: Select your country. Service Provider: Select your 3G/4G ISP. User Name/Password: Enter the user name and password for 3G/4G Internet service. Click Save. Knowledge Center ----------------------------------------------------------------------------------------------
Connect Automatically: Connect automatically to the Internet after rebooting the system or connection failure. 30 III Features & Configurations Connect Manually: Require the user to manually connect to the Internet before each session. Connect On Demand: Re-establish connection to the Internet only when there is data transmitting. Connect During Specified Time Period: Connect automatically to the Internet during a specified time length. Wireless Router & WISP Client Router Mode A. Select PPPoE if your ISP uses a PPPoE connection and gives you a PPPoE user name and a PPPoE password. B. Select Static IP if your ISP provides you with fixed or static IP address settings (special deployment by ISP; this is rare). CSelect DHCP (Dynamic IP) if you can access Internet simply by directly connecting your computer to an Internet-enabled ADSL/Cable modem without configuring any settings. 31 III Features & Configurations PPPoE Configuration Procedures:
Internet Connection Type: Select PPPoE. ISP Username: Enter the ISP login name. ISP Password: Enter the ISP login password. Click Save to save your settings. Knowledge Center ----------------------------------------------------------------------------------------------
1. MTU: The MTU (maximum transmission unit) is the largest data packet a network device transmits. The normal MTU value for most Ethernet networks is 1500 bytes, or 1492 bytes for PPPoE connections. For some ISPs, you might need to change the MTU. This is rarely required, and should not be done unless you are sure it is necessary for your ISP connection. For more information, see WAN MTU Setup. 2. Service Name: This is the descriptive name of the current connection. Only enter it if your ISP provides it. 32 III Features & Configurations 3. Server Name: This is the descriptive name of the server. Only enter it if your ISP provides it. Static IP Configuration Procedures:
Internet Connection Type: Select Static IP. IP Address/Subnet Mask/WAN subnet mask/Gateway/Primary DNS Server/Secondary DNS Server: Enter the ISP information you gathered in 1GettingPrepared. Click Save to save your settings. 33 III Features & Configurations DHCP Configuration Procedures:
Internet Connection Type: Select DHCP. Click Save to save your settings. WAN MTU Setup The MTU (maximum transmission unit) is the largest data packet a network device transmits. The normal MTU value for most Ethernet networks is 1500 bytes, or 1492 bytes for PPPoE connections. For some ISPs, you might need to change the MTU. This is rarely required, and should not be done unless you are sure it is necessary for your ISP connection. When one network device communicates across the Internet with another, the data packets travel through many devices along the way. If a device in the data path has a smaller MTU value than the other devices, the data packets have to be "fragmented" to accommodate the device with the smallest MTU value. The best MTU value is often just the factory default value. In some situations, changing the MTU value fixes one problem but causes another. Leave the MTU unchanged unless one of these situations occurs:
A. You have problems connecting to your ISP or other Internet service, and either your ISP or our technical support suggests changing the MTU value. Below web-based applications might require an MTU change:
34 III Features & Configurations A secure website that does not open, or displays only part of a web page Yahoo email MSN portal B. You use VPN and encounter serious performance problems. C. You used a program to optimize MTU for performance reasons, and now you have connectivity or performance problems. If you suspect an MTU problem, try changing the MTU to 1400. If this does not help, gradually reduce the MTU from the maximum value of 1500 until the problem disappears. 35 III Features & Configurations The common MTU sizes and applications are listed in the table below. MTU 1500 1492 1472 1468 1436 Application Typical for connections that do not use PPPoE or VPN. Used in PPPoE environments. Maximum size to use for pinging. (Larger packets are fragmented.) Used in some DHCP environments. Used in PPTP environments or with VPN. Note ---------------------------------------------------------------------------------------------------------------------
A wrong/improper MTU value may cause Internet communication problems. For example, you may be unable to access certain websites, frames within websites, secure login pages, or FTP or POP servers. 2.3 WAN Speed Click Basic -> WAN Speed to the configuration interface. Here you can configure the WAN speed and duplex mode. Tip--------------------------------------------------------------------------------------------------------------------------------------------
1. The router operates in "Auto-negotiation" (or Auto) mode by default. Usually, it works for most cases. In some situations, you might need to change the port mode. For example, if the cable connected to your router's WAN port is longer than 100m, you may need to use 10M full-duplex or 10M half-duplex for better performance. Ensure that your router's WAN port operates with the same speed and duplex mode as the remote link partner. If not, your router's WAN port may not receive and send data. 36 III Features & Configurations 2.4 DNS Settings Click Basic -> DNS Settings to enter the DNS configuration interface. Configuration Procedures:
DNS Settings: Check to enable the DNS settings. Primary DNS Server: Enter the IP address of your ISPs primary DNS server. Secondary DNS Address: If a secondary DNS server address is available, enter it here. This field is optional. Click Save to save your settings. Note ---------------------------------------------------------------------------------------------------------------------
The default DNS settings are recommended. Only change the DNS default settings if you know that your ISP requires specific servers. If incorrect DNS settings are configured, webpages will be unable to open. 37 III Features & Configurations 2.5 MAC Clone Some ISPs (Internet Service Providers) require end-user's MAC address to access their network. This feature copies your current PC's MAC address to the router. Click Basic -> MAC Clone to enter the MAC Clone screen. Knowledge Cente------------------------------------------------------------------------------------------------
1. Restore Default MAC: Reset the routers WAN MAC to factory default. 2. Clone MAC: Clicking this button copies the MAC address of the computer that you are now using to the router. Also, you can manually enter the MAC address that you want to use. You have to use the computer whose MAC address is allowed by your ISP. To restore default MAC address:
Click Restore Default MAC. Click Save to save your settings. To clone the MAC address of the computer that you are now using to the router:
Click Clone MAC. Click Save to save your settings. To manually enter the MAC address allowed by your ISP:
Enter the MAC address allowed by your ISP. 38 III Features & Configurations Click Save to save your settings. 2.6. DHCP DHCP (Dynamic Host Configuration Protocol) assigns an IP address to each device on the LAN/private network. When you enable the DHCP Server, the DHCP Server will automatically allocate an unused IP address from the IP address pool specified in this screen to the requesting device as long as the device is set to "Obtain an IP Address Automatically". If you disable this feature, you have to manually configure the TCP/IP settings for all PCs on your LAN to access Internet. Click Basic -> DHCP Server to enter the DHCP Server screen. Here you can change the DHCP IP address pool and lease time. Configuration Procedures:
DHCP Server: Select whether to enable or disable the DHCP server feature. Start IP/End IP: You can specify the starting and ending address of the IP address pool here. These addresses should be part of the same IP address subnet as the routers LAN IP address. 39 III Features & Configurations Lease Time: The lease time is a time length that the IP address is assigned to each device before it is refreshed. Click Save to save your settings. Tip--------------------------------------------------------------------------------------------------------------------------------------------
By default, the router functions as a DHCP server. Do not disable the DHCP server feature unless you want to manually configure the TCP/IP settings for all PCs on your LAN. 1. Lease time will be renewed automatically upon expiry. No additional configurations are needed. 2. If you are not an advanced user, the default DHCP server settings are recommended. 2.7 DHCP Client List Click Basic -> DHCP Client List. Here you can view the DHCP dynamic client list, which includes host name, IP address, MAC address, and lease time information. Tip---------------------------------------------------------------------------------------------------------------------------------------------
You can know whether there are unauthorized accesses by viewing the client list. Also, you can specify a reserved IP address for a PC in the LAN. That PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses could be assigned to servers that require permanent IP settings. Static Assignment Application Example:
To have a PC at the MAC address of 44:37:E6:4F:37:3B always receive the same IP address of 40
1 | User Manual Part 2 | Users Manual | 2.53 MiB | February 04 2014 / March 04 2014 |
III Features & Configurations 192.168.2.123. Configuration Procedures:
Enter the last number of the IP address you want to reserve, for example, 123. Enter the MAC address of 44:37:E6:4F:37:3B. Click Add. Click Save to save your settings. Tip-------------------------------------------------------------------------------------------------------------------------------------------
1. If the IP address you have reserved for your PC is currently used by another client, then you will not be able to obtain a new IP address from the device's DHCP server, instead, you must manually specify a different IP address for your PC to access Internet. 2. For PCs that has already obtained IP addresses, you may need to perform the Repair action to activate the configured static IP addresses. 41 III Features & Configurations 3 Wireless Settings This section includes the following:
Basic Security Access Control Connection Status To configure wireless network name, channel and other basic wireless settings, see Wireless - Basic. To secure your wireless network, see Wireless Security. To restrict access to your wireless network, see Access Control. To see who are connecting to your wireless network, see Connection Status. 3.1 Wireless-Basic Here you can configure the basic wireless settings of the router. Tip--------------------------------------------------------------------------------------------------------------------------------------------
1. The SSID is Tenda_XXXXXX by default, where XXXXXX is the last six characters in the device's MAC address. You can find it on the label attached on the bottom of the device. 2. If you are not an advanced user, it is advisable to only change the SSID (name of the network) and channel and leave other items unchanged. 42 III Features & Configurations Configuration Procedures:
SSID: This is the public name of your wireless network. Channel: Select a channel or select Auto to let system automatically select one for your wireless network to operate on if you are unsure. The best selection is a channel that is the least used by neighboring networks. Click Save to save your settings. Knowledge Center-----------------------------------------------------------------------------------------------
1. Network Mode (802.11 Mode): Select a correct mode according to your wireless clients. 11b: This network mode delivers wireless speed up to 11Mbps and is only compatible with 11b wireless clients. 11g: This network mode delivers wireless speed up to 54Mbps and is only compatible with 11g wireless clients. 11b/g mixed: This network mode delivers wireless speed up to 54Mbps and is compatible with 11b/g wireless clients. 11b/g/n mixed: This network mode delivers wireless speed up to 300Mbps and is compatible with 11b/g/n wireless clients. 2. BSSID: This is the MAC address of the device's wireless interface. 3. SSID Broadcast: This option allows you to have your network names (SSIDs) publicly broadcast or if you choose to disable it, the SSIDs will be hidden. 4. Channel Bandwidth: Select a proper channel bandwidth to enhance wireless performance. This option is available only in 802.11b/g/n. Wireless speed in the channel bandwidth of 20/40 is 2 times in 20. 5. Extension Channel: This is used to ensure N speeds for 802.11n devices on the network. This option is available only in 11b/g/n mixed mode with channel bandwidth of 20/40. 43 III Features & Configurations 3.2 Wireless Security Click Wireless -> Security to enter the Security screen. Here you can define a security key to secure your wireless network against unauthorized accesses. Configure security mode, cipher type and security key. Click Save to save your settings. Knowledge Center-----------------------------------------------------------------------------------------------
1. WEP: WEP is intended to provide data confidentiality comparable to that of a traditional wired network. 2. Open: Wireless speed can reach up to 54Mbps if WEP - Open is selected. 3. Shared: Wireless speed can reach up to 54Mbps if WEP - Shared is selected. 4. Mixed WEP: Compatible with both Open and Shared. Clients can connect to your wireless network either using Open or Shared 5. Default Key: Select a key to be effective for the current WEP encryption. For example, if you select Key 2, wireless clients must join your wireless network using this Key 2. 6. WPA-PSKWPA personal, support AES and TKIP cipher types. 7. WPA2-PSKWPA2 personal, support AES, TKIP and TKIP+AES cipher types. 44 III Features & Configurations 8. WPA/WPA2-PSK mixed: If selected, both WPA-PSK and WPA2-PSK secured wireless clients can join your wireless network. 9. AES: If selected, wireless speed can reach up to300Mbps. 10. TKIP: If selected, wireless speed can reach up to 54Mbps. 11.TKIP+AES: If selected, both AES and TKIP secured wireless clients can join your wireless network. 12. Key Renewal Interval: Enter a valid time period for the key to be changed. 3.3 Access Control Specify a list of devices to "Permit" or "Forbid" a connection to your wireless network via the devices MAC Addresses. Click Wireless -> Access Control to enter the configuration screen. There are three options available: Disable, Deny and Allow. A. If you want to allow all wireless clients to join your wireless network, select Disable. B. If you want to allow ONLY the specified wireless clients to join your wireless network, select Allow. C. If you want to disallow ONLY the specified wireless clients to join your wireless network, select Deny. 45 III Features & Configurations Wireless Access Control Application Example:
To only allow your own notebook at the MAC address of C8:3A:35:CC:34:25 to join your wireless network Configuration Procedures:
Select Allow. Enter the MAC address of the wireless device you want to restrict. Here in this example, enter C8:3A:35:CC:34:25. Click Add to add the MAC address to the MAC address list. Click Save to save your settings. Tip---------------------------------------------------------------------------------------------------------------------------------------------
Up to 16 wireless MAC addresses can be configured. 1. If you don't want to configure the complex wireless security settings and want to disallow others to join your wireless network, you can configure a wireless access control rule to allow only your own wireless device. 46 III Features & Configurations 3.4 Connection Status Click Wireless -> Connection Status. Here you can see a list of wireless devices connected to the router. Tip---------------------------------------------------------------------------------------------------------------------------------------------
1. The bandwidth here refers to the channel bandwidth instead of wireless connection rate. You can know whether there are unauthorized accesses to your wireless network by viewing the wireless client list. 4 Security This section includes the following:
Client Filter MAC Filter URL Filter Remote Web Management To restrict your LAN PCs to access certain services on Internet via their IP addresses, see Client Filter. To restrict your LAN PCs to access Internet via their MAC addresses, see MAC Filter. To restrict your LAN PCs to access certain websites on Internet via URL, see URL Filter. To enable the remote web management feature, see Remote Web Management. 47 III Features & Configurations 4.1 Client Filter This section allows you to set the times specific clients can or cannot access the Internet via the devices assigned IP addresses and service port. Click Security to enter the configuration screen. Knowledge Center-----------------------------------------------------------------------------------------------
1. Default: The default policy for the client filter. For the packets that do not match the set rule, the default rule is applied. 2. Filter Mode: Specify a filter mode for the rule. Deny: Disallow the packets that match the set rule to pass the router. For other packets that do not match the set rule, the default policy is applied. Allow: Allow the packets that match the set rule to pass the router. For other packets that do not match the set rule, the default policy is applied. Client Filter Application Example:
To prohibit PCs within the IP address range of 192.168.2.110--192.168.2.111 from accessing web pages during the time period of 8:00~18:00 from Monday to Friday. 48 III Features & Configurations Configuration Procedures:
Click Add to add a filter rule. Filter Mode: Select Deny. Description: Briefly describe the current rule. This field is optional. IP: Enter a starting IP address. Here in this example, enter 192.168.2.110. Enter an ending IP address. Here in this example, enter 192.168.2.111. WAN Port Range: Enter a service port number. Here in this example, enter 80 (HTTP (port 80) is the standard protocol for web servers.). Traffic Type: Select a protocol for the traffic. If you are unsure, select Both. Time: Specify a time period for the current rule to take effect. Here in this example, select 8:00~18:00. Day: Select a day, or several days of the week for the current rule to take effect. Here in this example, select Mon, Tue, Wed, Thur and Fri. Click Save to save your settings. Enable Client Filter: Check to enable or uncheck to disable the client filter feature. Select Allow from the Default drop-down list and then click Save. 49 III Features & Configurations Tip-------------------------------------------------------------------------------------------------------------------------
1. The valid service port number range is from 1 to 65534. 2. Up to 10 filter rules can be configured. 3. If you have not set up the system time for this device, click Tools -> Time & Date to set up correct time and date for the rules to be effective. 50 III Features & Configurations 4.2 MAC Filter This section allows you to restrict specific clients to access the Internet via the devices MAC addresses. Each PC has at least an installed network adapter with a unique MAC address. Click Security -> MAC Filter to enter the configuration screen. Knowledge Center ----------------------------------------------------------------------------------------------
1. Default: The default policy for the URL filter. For the packets that do not match the set rule, the default rule is applied. 2. Filter Mode: Specify a filter mode for the rule. Deny: Disallow the packets that match the set rule to pass the router. For other packets that do not match the set rule, the default policy is applied. Allow: Allow only the packets that match the set rule to pass the router. For other packets that do not match the set rule, the default rule is applied. MAC Filter Application Example:
Your router functions as an active DHCP server and delivers an unsecured wireless network. From time to time, you suffer from slow network speed and start to suspect unauthorized accesses to your network. You can set MAC filter rules to allow only your PC at 00:E4:A5:44:35:69 and your wireless device at 00:E4:A5:44:35:6A to access Internet via this router. Configuration Procedures:
51 III Features & Configurations Click Add to add a filter rule. Filter Mode: Select Allow. Description: Briefly describe the current rule. This field is optional. MAC Address: Specify the MAC address of the computer that you want to restrict, 00:E4:A5:44:35:69. Tip--------------------------------------------------------------------------------------------------------------------------------------------
If the device already connects to your router, you can simply select its MAC address from the MAC address list drop-down list. Time: Use the default settings. When Time is set to 0:00 to 0:00, the rule will be applied 24 hrs/day. Day: Select a day, or several days of the week for the current rule to take effect. Here in this example, select Everyday. Click Save to save your settings. Repeat steps 1-7 to configure a rule for the MAC address "00:E4:A5:44:35:6A". 52 III Features & Configurations Enable MAC Filter: Check to enable or uncheck to disable the MAC filter feature. Select Deny from the Default drop-down list and then click Save. 53 III Features & Configurations Tip--------------------------------------------------------------------------------------------------------------------------------------------
1. Up to 10 MAC filter rules can be configured. 2. If you have not set up the system time for this device, click Tools -> Time & Date to set up correct time and date for the rules to be effective. 4.3 URL Filter This section allows you to control URL access. Click Security -> URL Filter to enter the configuration screen. Knowledge Cente------------------------------------------------------------------------------------------------
1. Default: The default policy for the URL filter. For the packets that do not match the set rule, the default rule is applied. 2. Filter Mode: Specify a filter mode for the rule. Deny: Disallow the packets that match the set rule to pass the router. For other packets that do not match the set rule, the default policy is applied. Allow: Allow only the packets that match the set rule to pass the router. For other packets that do not match the set rule, the default rule is applied. URL Filter Application Example:
To prevent your home PC (192.168.2.120) from accessing YouTube from 8:00 to 18:00 during working days: Monday- Friday. 54 III Features & Configurations Configuration Procedures:
Click Add to add a filter rule. Filter Mode: Select a filter mode. Here in this example, select Deny. Description: Briefly describe the current rule. This field is optional. IP Address: Enter the IP address you wish to restrict. Here in this example, enter
"192.168.2.120". URL String: Enter part of or the entire domain name of the web site you wish to restrict. Separate different domain names or domain name key words with a comma, for example,
"YouTube, Hollywood.com". Time: Specify a time period for the current rule to take effect. Here in this example, select 8:00~18:00. Day: Select a day, or several days of the week for the current rule to take effect. Here in this example, select Mon, Tue, Wed, Thur and Fri. Click Save to save your settings. 55 III Features & Configurations Enable URL Filter: Check to enable or uncheck to disable the URL filter feature. Select Allow from the Default drop-down list and then click Save. Tip---------------------------------------------------------------------------------------------------------------------------------------------
1.Different URL strings must be separated with a comma. To match all websites, use * (asterisk). 2. Up to 10 filter rules can be configured. 3. If you have not set up the system time for this device, click Tools -> Time & Date to set up correct time and date for the rules to be effective. 4.4 Remote Web Management The Remote management allows the device to be configured and managed remotely from the Internet via a web browser. Click Security -> Remote Web Management to enter the configuration screen. Tip------------------------------------------------------------------------------------------------------------------------------------------
1. For better security, configure a port number (between 1025-65535) as remote web management interface, do not use the number of any common service port (1-1024). 2. Make sure your WAN IP address (Internet IP address) is a public IP address. Private IP addresses are not routed on the Internet. 3. It is unsafe to make your router remotely accessible to all PCs on external network. For better 56 III Features & Configurations security, we suggest that only enter the IP address of the PC for remote management. Remote Web Management Application Example:
To access your router (WAN IP address: 102.33.66.88) at your home from the PC (218.88.93.33) at your office via the port number 8090 Configuration Procedures:
Enable: Check to enable the remote Web management feature. Port: This is the management port to be open to outside access. Here in this example, enter 8090. IP Address: Specify the IP address for remote management. Here in this example, enter
"218.88.93.33". Click Save to save your settings. Type "http://102.33.66.88:8090" into your browsers address or location field and you can access the router at your home remotely. Knowledge Center-----------------------------------------------------------------------------------------------
1. IP Address: Here you can specify the IP address for remote management (When set to 0.0.0.0, the device becomes remotely accessible to all the PCs on Internet or other external networks). 2. Port: This is the management port to be open to outside access. The default setting is 8080. This can be changed. 57 III Features & Configurations 5 Advanced Applications This section includes the following:
DDNS Port Forwarding DMZ Host UPnP Routing Table To remotely access the device via a domain name or access a server on a LAN PC, see DDNS . To let an Internet user access a server on your LAN PC, see Port Forwarding. To let an Internet user access your LAN PC without any restriction, see DMZ Host. To automatically map the ports between WAN and LAN, see UPnP. To view routes, see Routing Table. 5.1 DDNS Dynamic DNS or DDNS is a term used for the updating in real time of Internet Domain Name System (DNS) name servers. We use a numeric IP address allocated by Internet Service Provider
(ISP) to connect to Internet; the address may either be stable ("static"), or may change from one session on the Internet to the next ("dynamic"). However, a numeric address is inconvenient to remember; an address which changes unpredictably makes connection impossible. The DDNS provider allocates a static host name to the user; whenever the user is allocated a new IP address this is communicated to the DDNS provider by software running on a computer or network device at that address; the provider distributes the association between the host name and the address to the Internet's DNS servers so that they may resolve DNS queries. Thus, uninterrupted access to devices and services whose numeric IP address may change is maintained. Click Advanced ->
DDNS to enter the DDNS screen. Tip---------------------------------------------------------------------------------------------------------------------------------------------
1. To use the DDNS feature, you need to have an account with one of the Service Providers in the drop-down menu first. 58 III Features & Configurations 2. This router supports five DDNS service providers: dyndns and no-ip. DDNS Application Example:
If your ISP gave you a dynamic (changing) public IP address, you want to access your router remotely (6.5 Remote Web Management) but you cannot predict what your router's WAN IP address will be, and the address can change frequently. In this case, you can use a commercial Dynamic DNS service. It lets you register your domain to their IP address and forwards traffic directed at your domain to your frequently changing IP address. If you obtain the following account from your dyndns.org service provider:
User Name: tenda Password: 123456 Domain Name: tenda.dyndns.org. You want to use the PC at 218.58.98.3 to remotely access this router on port number 8090. Configuration Procedures:
DDNS Service: Select Enable. Service Provider: Select your DDNS service provider from the drop-down menu. Here in this example, select dyndns. User Name: Enter the DDNS user name registered with your DDNS service provider. Here in this example, enter tenda. Password: Enter the DDNS Password registered with your DDNS service provider. Here in this example, enter 123456. 59 III Features & Configurations Domain Name: Enter the DDNS domain name with your DDNS service provider. Here in this example, enter tenda.dyndns.org. Click Save to save your settings. Click Security -> Remote Web Management, enable the Remote Web Management feature, enter 8090 in the Port field, 218.58.98.3 in the IP Address field and then click Save to save your settings. When the Connection Status on this DDNS page displays Connected, you can access your router from the Internet by typing your routers domain name into your browsers address or location field on your PC (218.58.98.3) followed by a colon (:) and the remote management port number. Here in this example, enter http://tenda.dyndns.org:8090. 5.2 Port Forwarding You want to share resources on your PC with your friends who are not in your LAN. But, by default, the router's firewall blocks inbound traffic from the Internet to your computers except replies to your outbound traffic. You can use the Port Forwarding feature to create exceptions to this rule so that your friends can access these files from external networks. When accessing your PC from Internet, type "protocol://xxx.xxx.xxx.xxx:port number" into your browsers address or location field. The protocol and port are the ones used by the service and
"xxx.xxx.xxx.xxx" is the WAN IP address of your router. For example, a FTP server uses the ftp protocol and 21 (standard port number). 60 III Features & Configurations Click Advanced -> Port Forwarding to enter the configuration screen. Application Example:
As shown in the figure above, your PC at 192.168.0.10 connects to the router and runs a FTP server on port number 21. Your friends want to access this FTP server on your PC from external network. Tip--------------------------------------------------------------------------------------------------------------------------------------------
To successfully implement the port forwarding feature, note below:
1. Make sure your WAN IP address (Internet IP address) is a public IP address. Private IP addresses are not routed on the Internet. 2. Make sure you enter correct service port numbers. 3. To ensure that your server computer always has the same IP address, assign a static IP address to your PC. 4. Operating System built-in firewall and some anti-virus programs may block other PCs from accessing resources on your PC. So it is advisable to disable them before using this feature. 61 III Features & Configurations Configuration Procedures:
Start Port: Enter the starting port number for the service. Here in this example, enter 21. End Port: Enter the ending port number for the service. Here in this example, enter 21. Internal IP: Enter the IP address of your local computer that will provide this service. Here in this example, enter 192.168.2.10. Protocol: Specify the protocol required for the service utilizing the port(s). Check Enable to activate this rule. Click Save to save your settings. If your WAN IP address is 202.33.56.88, when accessing your FTP server from external network, your friends only need to enter ftp://202.33.56.88:21 in their browsers. 62 III Features & Configurations 5.3 DMZ Host The DMZ (De-Militarized Zone) function disables the firewall on the router for one device for a special purpose service such as Internet gaming or video conferencing applications that are not compatible with NAT (Network Address Translation). Click Advanced -> DMZ Host to enter the DMZ Host screen. Note ---------------------------------------------------------------------------------------------------------------------
1. DMZ host poses a security risk. A computer configured as the DMZ host loses much of the protection of the firewall and becomes vulnerable to attacks from external networks. 2. Hackers may use the DMZ host computer to attack other computers on your network. Configuration Procedures:
DMZ Host IP Address: The IP Address of the device for which the routers firewall will be disabled. Be sure to statically set the IP Address of that device for this function to be consistent. Enable: Check to enable the DMZ host. Click Save to save your settings. 63 III Features & Configurations Tip---------------------------------------------------------------------------------------------------------------------------------------------
1. Be sure to statically set the IP Address of the computer that serves as a DMZ host for this function to be consistent. 2. Security softwares such as anti-virus software and OS built-in firewall, etc may affect the DMZ host feature. Disable them if DMZ host fails. 5.4 UPNP The Universal Plug and Play (UPnP) feature allows network devices, such as computers from Internet, to access resources on local host or devices as needed. UPnP-enabled devices can be discovered automatically by the UPnP service application on the LAN. If you use applications such as multiplayer gaming, peer-to-peer connections, real-time communications such as instant messaging, or remote assistance (a feature in Windows XP), you may need to enable Universal Plug and Play (UPnP) for better experience. Click Advanced -> UPnP to enter the UPnP screen. The UPnP feature is enabled by default. 64 III Features & Configurations 5.5 Route Table Click Advanced -> Route Table to view the router's route table. Knowledge Center ----------------------------------------------------------------------------------------------
1. Destination IP: The IP address of the final destination. "0.0.0.0" indicates any network segment. 2. Subnet Mask: The subnet mask for the specified destination. 3. Gateway: This is the next router on the same LAN segment as the router to reach. 4. Hop: This stands for the number of routers between your network and the destination. 5. Interface: The interface between your router and the final destination. 6 Bandwidth Control If there are multiple PCs behind your router competing for limited bandwidth resource, then you can use this feature to specify a reasonable amount of bandwidth for each such PC, so that no one will be over stuffed or starved to death. Click Bandwidth Control to enter the configuration interface. Tip--------------------------------------------------------------------------------------------------------------------------------------------
1. 1M=128KByte/s. 2. The volume of uplink traffic/downlink traffic should not be larger than that allowed on your router's WAN (Internet) port. You can ask your ISP to provide the volume of Internet traffic. 3. The bandwidth for ADSL/DSL line usually refers to the download bandwidth. Bandwidth Control Application Example:
You share a 4M-broadband service with your neighbor (at 192.168.2.125). He always downloads a 65 III Features & Configurations large volume of data from Internet, which sharply frustrates your Internet surfing experience; you can use this feature to set limits for the volume of Internet traffic he can get. For example, you can split the 4M into two, so your neighbor can only use up to 2M Internet traffic and you can enjoy 2M. Configuration Procedures:
Enable Bandwidth Control: Check the Enable box to enable the Bandwidth Control feature. IP Address: Enter the last number of the IP address. Here in this example, enter 125 in both boxes. Upload Limit: Set a limit to regulate upload bandwidth of PCs on the LAN. Here in this example, enter 32 in both boxes. Download Limit: Set a limit to regulate download bandwidth of PCs on the LAN. Here in this example, enter 256 in both boxes. Enable: Check to enable the current rule. Add to List: Click to add current rule to the rule list. Click Save to save your settings. 66 III Features & Configurations 7 Tools This section explains the following:
Time & Date Firmware Upgrade Backup & Restore Restore Factory Default Change Password Logs Reboot To configure system time, see Time & Date. To upgrade firmware, see Firmware Upgrade. To backup or restore configurations, see Backup & Restore. To restore factory default settings, see Restore to Factory Default Settings. To change login password, see Change Password. To view system and WAN logs, see Logs. To restart device, see Reboot. 7.1 Time& Date Click Tools -> Time & Date to enter the time screen. Tip------------------------------------------------------------------------------------------------------------------------------------------
Configured time and date info will be lost if the device gets disconnected from power supply. However, it will be updated automatically when the device reconnects to Internet. To activate time-based features (e.g. firewall), the time and date info shall be set correctly first, either manually or automatically. 67 III Features & Configurations A. Sync with Internet time servers Configuration Procedures:
nternet Time Server: If enabled, time and date will be updated automatically from the Internet. Check to enable the feature. Sync Interval: Specify a time interval for periodic update of time and date information from the Internet. Time Zone: Select your current time zone. Click Save to save your settings. 68 III Features & Configurations B. Set Time and Date Manually/Sync with Your PC Configuration Procedures:
Internet Time Server: If enabled, time and date will be updated automatically from the Internet. Uncheck to disable the feature. Specify the time and date manually or click the Copy Your PC's Time to automatically copy your PC's time to the device. Click Save to save your settings. And then go to Status to make sure the system time is correctly updated. 7.2 Firmware Upgrade Click Tools -> Firmware Upgrade to enter the configuration screen. Firmware upgrade is released periodically to improve the functionality of your device and also to add new features. If you run into a problem with a specific feature of the device, log on to our website
(www.tendacn.com) to download the latest firmware to update your device. If you run into a problem with a specific feature of the device, log on to our website (www.tendacn.com) to download the latest firmware to update your device. 69 III Features & Configurations Note ----------------------------------------------------------------------------------------------------------------------
1. Before you upgrade the firmware, make sure you are having a correct firmware. A wrong firmware may damage the device. 2. It is advisable that you upgrade the device's firmware over a wired connection. DO NOT interrupt the power to the router when the upgrade is in process otherwise the router may be permanently damaged. Configuration Procedures:
Click Browse. Select the upgrade file and click Open. Click Update. Click OK on the appearing screen and wait for it to complete. When upgrade is completed, view Current System Version. It should display the firmware you load. 70 III Features & Configurations 7.3 Backup & Restore Once you have configured the device the way you want it, you can save these settings to a configuration file on your local hard drive that can later be imported to your device in case that the device is restored to factory default settings. Click Tools -> Back & Restore to enter the configuration screen. Tip--------------------------------------------------------------------------------------------------------------------------------------------
The default configuration file name is "RouterCfm.cfg". Do include the file name suffix of ".cfg"
when renaming the file name to avoid problems. Backup Configuration Procedures:
Click Backup. Click OK on the appearing window. 71 III Features & Configurations Click Save on the File Download window. Select a local hard drive to save the file and click Save. 72 III Features & Configurations To Restore Configurations:
Click Browse. Select the configuration file that is saved previously to your local hard drive and click Open. 73 III Features & Configurations Click the Restore button to reset your device to previous settings. 7.4 Restore to Factory Default Settings Click Tools -> Restore Factory Default to enter the configuration screen. Here you can reset the device to factory default settings. Note ---------------------------------------------------------------------------------------------------------------------
1. If you enable this option, all current settings will be deleted and be restored to factory default values. You will have to reconfigure Internet connection settings and wireless settings. 2. Do not restore factory default settings unless the following happens:
You need to join a different network or unfortunately forget the login password. You cannot access Internet and your ISP or our technical support asks you to reset the router. 74 III Features & Configurations The factory default settings are listed below:
IP Address: 192.168.2.1 Subnet Mask: Enter 255.255.255.0. Password: admin For device's factory default settings, see Appendix 3 Factory Default Settings. 7.5 Change Password Click Tools -> Change Password to enter the configuration screen. It is strongly recommended that you change the factory default login password. Otherwise, anyone in your network can access this utility to change your settings. Tip------------------------------------------------------------------------------------------------------------------------------------------
1. The default login password is admin. 2. The valid password must be between 3~12 characters and only include letters, numbers and underscore. Configuration Procedures:
Old Password: Enter the current login password. New Password: Input a new password. Confirm New Password: Re-enter the new password for confirmation. Click Save to save your settings. 75 III Features & Configurations 7.6 Logs Click Tools -> Logs to enter the logs screen. Here you can view the history of the devices actions upon system startup. Three types of logs are available: System, sntp and ddns. 7.7 Reboot When a certain feature does not take effect or the device fails to function correctly, try rebooting the device. 76 IV Appendix IV Appendix 1 Configure PC TCP/IP Settings Windows 7 Click Start -> Control Panel. 77 IV Appendix Click Network and Internet. Click Network and Sharing Center. 78 IV Appendix Click Change adapter settings. Click Local Area Connection and select Properties. 79 IV Appendix Select Internet Protocol Version 4 (TCP/IPv4) and click Properties. 80 IV Appendix Select Obtain an IP address automatically and click OK. 81 IV Appendix Click OK on the Local Area Connection Properties window to save your settings. 82 IV Appendix Windows XP Right-click My Network Places and select Properties. Right click Local Area Connection and select Properties. 83 IV Appendix Select Internet Protocol Version 4 (TCP/IPv4) and click Properties. Select Obtain an IP address automatically and click OK. 84 IV Appendix Click OK on the Local Area Connection Properties window to save your settings. 85 IV Appendix 2 FAQs This section provides solutions to problems that may occur during installation and operation of the device. Read the following if you are running into problems. If your problem is not covered here, please feel free to go to www.tendacn.com to find a solution or email your problems to: support@tenda.com.cn or support02@tenda.com.cn. We will be more than happy to help you out as soon as possible. 1. Q: I cannot access the device's management interface. What should I do?
Make sure the power LED on the device's front panel is on and the SYS LED blinks normally. Make sure all cables are correctly connected and the corresponding LAN LED on the device is on. Verify that your PC's TCP/IP settings are configured correctly. If you select the "Use the following IP address" option, set your PC's IP address to any IP address between 192.168.2.2~192.168.2.254. Or you can select the "Obtain an IP address automatically"
option. Delete your browser cache and cookies or use a new browser. Make sure you enter 192.168.2.1 in the address bar. Open your browser and click Tools -> Internet Options -> Connections -> LAN Settings, uncheck the Use a proxy server for your LAN option. Press the WPS/RST button for about 10 seconds to restore your device to factory default settings. Then log to your device again. 2. Q: I changed the login password and unfortunately forget it. What should I do?
Press the WPS/RST button for over 7 seconds to restore your device to factory default settings. 3. Q: My computer shows an IP address conflict error after having connected to the device. What should I do?
Make sure there are no other DHCP servers on your LAN or other DHCP servers are disabled. Make sure the device's LAN IP is not used by other devices on your LAN. The device's default LAN IP address is 192.168.2.1. 86 IV Appendix Make sure the statically assigned IP addresses to the PCs on LAN are not used by others PCs. 4. Q: I have problems connecting to Internet/Secure websites do not open or displays only part of a web page. What should I do?
This problem mainly happens to users who use the PPPoE or Dynamic IP Internet connection type. You need to change the MTU size. Try changing the MTU to 1450 or 1400. If this does not help, gradually reduce the MTU from the maximum value until the problem disappears. 3 Factory Default Settings The table below lists the factory default settings of your device. Item Login IP Address 192.168.2.1 Default Settings Router Login Login User Name Login Password admin admin Internet Connection Type Mode Auto-switch Enabled Network Settings MTU WAN Speed DNS IP Address LAN Settings Subnet Mask LAN DHCP Server IP Pool Time Zone Wireless 1492 (PPPoE) 1500 (DHCP/Dynamic and Static IP) Auto Disable 192.168.2.1 255.255.255.0 Enabled 192.168.2.100~192.168.2.200
(GMT+08:00)Beijing, Chongquing, Hong Kong, Urumqi Enabled Tenda_XXXXXX (where XXXXXX is the last six characters in the device's MAC SSID address) You can find it on the label attached to the Wireless Network Mode SSID Broadcast Channel device. 11b/g/n mixed Enabled AutoSelect Channel Bandwidth 20/40 Extension Channel AutoSelect Wireless Security Wireless Access Control Disabled Disabled 87 IV Appendix Remote Web Management Disabled Bandwidth Control Others DMZ Host UPnP Disabled Disabled Enable Internet Access Management Disabled 4 Remove Wireless Network from Your PC If you change wireless settings on your wireless device, you must remove them accordingly from your PC; otherwise, you may not be able to wirelessly connect to this device. Below describes how to remove a wireless network from your PC. Windows 7 Right-click the Network icon and select Properties. Select Manage Wireless Networks. 88 IV Appendix Select the wireless network and click Remove network. 89 IV Appendix Windows XP Right-click My Network Places and select Properties. Right click Wireless Network Connection and then select Properties. 90 IV Appendix Click Wireless Networks, select the wireless network name under Preferred networks and then click the Remove button. 91 IV Appendix 5 Safety and Emission Statement CE Mark Warning This is a Class B product in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. This device complies with EU 1999/5/EC. NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.(2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver. 92 IV Appendix
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. NOTE:(1)The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.(2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable NCC Notice 93
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-04-03 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2014-04-03
|
||||
1 | Applicant's complete, legal business name |
SHENZHEN TENDA TECHNOLOGY CO., LTD.
|
||||
1 | FCC Registration Number (FRN) |
0017645623
|
||||
1 | Physical Address |
6-8 Floor, Tower E3
|
||||
1 |
Shenzhen, N/A 518052
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@telefication.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
V7T
|
||||
1 | Equipment Product Code |
4G301
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
S****** Y******
|
||||
1 | Title |
Engineer
|
||||
1 | Telephone Number |
86-75********
|
||||
1 | Fax Number |
866-7********
|
||||
1 |
c******@tenda.cn
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Neutron Engineering, Inc.
|
||||
1 | Name |
S**** L******
|
||||
1 | Physical Address |
China
|
||||
1 | Telephone Number |
86-76********
|
||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Neutron Engineering, Inc.
|
||||
1 | Name |
C**** W********
|
||||
1 | Physical Address |
China
|
||||
1 | Telephone Number |
86-76********
|
||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless N300 3G/4G Router | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
BTL Inc.
|
||||
1 | Name |
D****** D********
|
||||
1 | Telephone Number |
86769******** Extension:
|
||||
1 | Fax Number |
+8676********
|
||||
1 |
d******@newbtl.org.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | MO | 2412.00000000 | 2462.00000000 | 0.1200000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC