Install Guide 1 Open the Package
Wireless N300 Ceiling Access Point*1
Ethernet Cable*1 Bracket*1 Screw*4 Expansion Bolt*4 Position Paster*1 Install Guide*1 If any item is incorrect, missing, or damaged, please contact your reseller for immediate replacement. 2 Get to Know the Device LED Light Status Description SYS Solid The device is starting. Blinking The device is functioning normally. Off The device is receiving no electric power or the LED light is turned off on the web page of the AC. Button
&
Interface Function Description A10/100M auto-negotiationRJ-45port that can:
a) connect to a PoE device for both data and electric power LAN transmission;
b) connectto a PC, switch or any other Ethernet device for data communication only. RST Press and hold it with a needle for 6 seconds. The device will be restored to factory default settings in 1 minute. 3 Install the Device Step 1Prepare the following:
Step 2Adhere the position paster onto the ceiling where your AP will be installed. Step 3Borefour 25~30mm deep holes by using the hammer drill (6mm drill bit)according to the marks on the position paster. Step 4Strike the expansion bolts into the holes with the rubber hammer, and then fix the bracket with the provided screws. Step 5Attach the device to the bracket and make sure it is aligned correctly. 4 Connect the Device Step 1Connect the APs LAN port to an IEEE 802.3af-compliant PoE switchs PoE port with an Ethernet cable. Step 2 Connect an access controller to the core switch with an Ethernet cable. Step 3 Connect other devices and check the network topology. Tips As AC500 will configure the AP,there is no need to configure the AP. If you want to
know the configuration method, please refer to the user guide of AC500.
When used alone (without being managed by an access controller), this APs default SSID is Tenda_XXXXXX,where XXXXXX is the last six characters of its MAC addresson the label on the back of AP. 2014 Shenzhen Tenda Technology Co., Ltd. All rights reserved. This documentation (including pictures, images, and product specifications, etc.) is for reference only. To improve internal design, operational function, and/or reliability,Tenda reserves the right to make changes to the products described in this document without obligation to notify any person or organization of such revisions or changes. 5 S Safety a and Emi ission S Stateme ent CE Mark Warn ing This s is a Class s B product t. In a dom mestic enviro onment, this s product m may cause r radio inte rference, in which case e the user m may be requ uired to take e adequate measures. This dev ice complies s with EU 19 999/5/EC. NOT TE: (1) The manufacture er is not res ponsible for any radio o or TV interfer rence cause ed by una uthorized m modifications s to this e equipment.
(2) To av void unnece essary radia ation inte rference, it i s recommen nded to use a shielded RJ45 cable. FCC C Statemen t This s device com mplies with P Part 15 of th he FCC Rule es. Operatio on is subject t to the follow wing two conditions:
(1) This de evice may n not cause ha armful interf ference, and d (2) this de evice mus st accept an ny interferen nce received d, including ope ration. interference e that may c cause undes sired This s equipment t has been t tested and f found to com mply with the e limits for a a Class B d igital dev ice, pursuan nt to Part 1 15 of the F FCC Rules. These limit ts are desig gned to pro ovide reas sonable pro otection aga ainst harmf ul interferen nce in a re esidential in nstallation. This equ ipment gene erates, uses s and can r adiate radio o frequency energy and d, if not insta alled and used in ac ccordance w with the inst ructions, ma ay cause ha armful interf ference to r radio com mmunications s. However r, there is n no guarante e that interf rference will l not occur in a part ticular insta llation. If th his equipme ent does ca ause harmf ful interferen nce to radi o or telev vision recep ption, which can be det termined by y turning the e equipment t off and on
, the use r is encoura aged to try to o correct the e interferenc e by one of the following g measures s:
R Reorient or relocate the e receiving a ntenna. I Increase the e separation between th he equipmen nt and receiv ver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.