FCC ID: V7TA301V2 Wireless N300 Universal Range Extender

Wireless N300 Universal Range Extender I Wireless N300 Universal Range Extender Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co., Ltd. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integr ation, including its accessories and software, belongs to Shenzhen Tenda Technology Co., Ltd. No part of this publication can be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the prior written permission of Shenzhen Tenda Technology Co., Ltd. If you would like to know more about our product information, please visit our website at http://www.tendacn.com . Disclaimer of Warranties Pictures, images and product specifications herein are for references only. To improve internal design, operational function, and/or reliability, Tenda reserves the right to make changes to the products described in this document without obligation to notif y any person or organization of such revisions or changes. Tenda does not assume any liability that may occur due to the use or application of, the product or circuit layout(s) described herein. Every effort has been made in the preparation of this documen t to ensure accuracy of the contents, but all statements, information and recommendations in this document do not constitute the warranty of any kind, express or implied. II Wireless N300 Universal Range Extender Preface Thank you for purchasing Tenda wireless range extender. This guide applies to A300/A301. As they share many similarities in many aspects, here we take A300 for example. Before configuring it, please read this user guide carefully. Conventions Note: Information you need to pay attention to. Tip: Additional info rmation to help you save time or resources. Technical Support Website: http://www.tendacn.com Technical Support: support@tenda.com.cn Telephone: (86 755) 2765 7180 Email: sales@tenda.com.cn Skype: tendasz YouTube: Tendasz1999 III Wireless N300 Universal Range Extender Contents Chapter 1 Product Ov erv iew ........................................................................ 1 1.1 Pack age Conte nts ................................................................................. 1 1.2 Gettin g to Kno w Yo ur W ireless Range Ext ender ..................................... 1 LED ........................................................................................................ 2 Port & Button .......................................................................................... 2 Label ...................................................................................................... 2 1.3 Posit ion Your W ireless Rang e Exten der ................................................. 2 Chapter 2 Internet Connection Setup .......................................................... 4 2.1 Hard ware I nstallation ............................................................................ 4 2.2 Conf igure the R ange Extender ........................................................... 4 Method One: Setup b y W eb-based Mana gem e nt Pag e .............................. 4 Method T wo: Setup b y Button .................................................................. 7 2.3 Internet Conn ectio n Setu p ..................................................................... 8 Conf igure IP ............................................................................................ 8 W eb Login ............................................................................................... 8 2.4 Verif y In tern et Co n nection .................................................................. 10 2.5 Join Your W ireless Connectio n ............................................................ 11 W in7 OS ............................................................................................... 11 W indo ws XP OS .................................................................................... 13 Chapter 3 Adv anced Settings .................................................................... 15 3.1 W izard ................................................................................................ 15 3.2 S yst em Status .................................................................................... 15 3.3 W ireless ............................................................................................. 16 3.3.1 W ireless Basic Settings ................................................................. 16 3.3.2 W ireless Securit y .......................................................................... 17 3.3.3 Access Control ............................................................................. 18 3.3.4 W ireless Connection Status ........................................................... 20 3.4 T ools .................................................................................................. 20 3.4.1 T im e Settin gs ............................................................................... 20 3.4.2 Up grade ....................................................................................... 21 3.4.3 Back up/Restore ............................................................................ 22 3.4.4 Restore to Factory Def ault ............................................................ 22 3.4.5 Ch ange Password ......................................................................... 23 3.4.6 S yslo g .......................................................................................... 24 3.4.7 Re boot ......................................................................................... 24 Chapter 4 Appendix ................................................................................... 25 Appe ndix 1 Co nf igure I P ........................................................................... 25 W in7 OS ............................................................................................... 25 W indo ws XP OS .................................................................................... 27 IV Wireless N300 Universal Range Extender Appe ndix 2 Def ault Set tings ...................................................................... 29 Appe ndix 3 FAQs ...................................................................................... 30 Appe ndix 4 Rem ove W ireless Network f rom yo ur PC .................................. 31 Appe ndix 5 Saf et y an d Em ission Stat em ent ............................................... 33 V Chapter 1 Product Overview Chapter 1 Product Overview 1.1 Package Contents Unpack the package carefully and verify the following items are included:

W ireless Range Extender Install Guide Ethernet Cable Resource CD If any of the above items are incorrect, missing, or damaged, please contact your Tenda reseller for immediate replacement. 1.2 Getting to Know Your Wireless Range Extender 1 Chapter 1 Product Overview LED LED PW R RE(Range Extender)

(Signal Strength) LAN Status Description Solid Solid Proper connection to power supply Bridged successfully Blinking Negotiating key Off Not bridged Solid Green Strong signal Solid Orange Weak signal Off Solid Not bridged Proper connection is established on the LAN port. Blinking Data transmitting on the LAN port Port & Button 1 LAN Port for connecting to a PC, switch or router. 2 RESET: Press it for over 7 seconds until the PW R LED is no longer blinking to restore factory default settings. For default settings, please refer to Appendix 2. 3

: Range Extender button for wireless extension. Label You can acquire the following information from Label:

1. Model: Displays the pro duct model. 2. Default Access: The default web login is http://re.tendacn.com . 3. Password: The default password is admin. 4. M AC: Displays the device's default MAC address. By default, this device s wireless network name (SSID) is Tenda_XXXXXX, wher e XXXXXX is the last six characters of the MAC address. 1.3 Position Your Wireless Range Extender For best performance, follow rules below to place your wireless range extender:

2 Chapter 1 Product Overview The Best Way is Half -Way Generally, the ideal location for the range extender is half-way between your wireless router and your W i -Fi enabled devices. If that is not impossible, placing the range extender closer to your wireless router will ensure better performance. Solid Green LED Choose a location that lights up the green sign al strength LED Less Interference = More Stability

. Try to position your range extender away from electrical devices that are potential sources of interference, such as ceiling fans, home security systems, microwaves, PCs, refrigerators, the base of a cordless phone, or a 2.4 GHz cordless phone. Less Obstacles = Better Performance Try to choose a location that minimizes obstacles between the range extender and your wireless router. Open corridors and other spacious locations will typically provide bette r conditions for performance than a crowded room. 3 Chapter 2 Internet Connection Setup Chapter 2 Internet Connection Setup 2.1 Hardware Installation 1. Position the wireless range extender close to a wireless router or access point and then plug it into a power outlet nearby. 2. Connect your W ireless Clients (such as notebook, pad, smart phone, etc.) to the range extender wirelessly. Or you can connect your PC to the sole LAN port of Range Extender with an Ethernet cable. 2.2 Configure the Range Extender Method One: Setup by Web -based Management Page Application example:

Assuming the remote wireless router has the following information:

SSID: Tenda_881218 Security Mode: W PA-PSK Cipher Type: AES 4 Chapter 2 Internet Connection Setup Security Key: 12345678 LAN IP Address: 192.168.0.1 Configuration procedures:

1. On the W izard screen, c lick Open Scan, select the remote router's wireless network (SSID), say Tenda_ 881218, click OK. 2. Enter the remote devices security key and click Save;

3. In the appearing dialogue box click OK;

5 Chapter 2 Internet Connection Setup 4. Click System Status to check the bridge status. W hen the b ridge status displays Connected , bridged successfully. Tip -------------------------------------------------------------------------------------

1. If the wireless range extender is connected to the remote router within 20 seconds, the wireless range ex tender s DHCP server will be disabled automatically. Thus, the wireless range extender will get the IP assigned from the remote router and then you can access to the Internet. 2. If the wireless range extender isnt connected to the remote router within 20 seconds, the wireless range extender s DHCP server will be enabled automatically. The wireless range extender will get the IP assigned from the wireless range extender itself. Thus, you cant access to the Internet. 3. W hen bridged successfully, the rang e extender s SSID and security mode will be the same as that of the remote router.

-----------------------------------------------------------------------------------------------

6 Chapter 2 Internet Connection Setup Method Two: Setup by Button By pressing the R E button, you can achieve wireless bridging for extending wireless network withou t complicated procedures. Configuration procedures:

1. Press the W PS or QSS button on your wireless router for 1~3 seconds ;

2. Press the RE button on the wireless range extender for 1~3 seconds within 2 minutes ;

7 Chapter 2 Internet Connection Setup 3. W hen the RE LED displays a solid light, the wireless range extender will be connected to your desired router successfully. You can also login to the web management interface to che ck bridge status. Note -------------------------------------------------------------------------------------

1. Ensure the wireless range extender is placed near the wireless router for better performance. 2. AS the latest W PS 2.0 only supports W PA2 security mode, we recommend you use Method One to configure this device or set your wireless router s security mode to W PA2. 3. To implement the W PS feature, your wireless router must support and enable this feature.

--------------------------------------------------------------------------------------------

2.3 Internet Connection Setup Configure IP Configure your PC obtain IP address automatically. If you are not clear about this, please refer to Appendix 1 Configure IP. Web Login 1. Launch a browser, and usually it will login automatically. If not, input re.tendacn.com in the address bar and press Enter. 8 Chapter 2 Internet Connection Setup 2. Enter the default password admin and click OK. 3. Then the following page will appear. Internet Connection Setup W ireless bridging allows a wireless network to be expanded u sing multiple access points. The network topology is shown below:

9 Chapter 2 Internet Connection Setup Tip--------------------------------------------------------------------------------------

Before configuring it by web-based management page, make sure you have the following informatio n:

1. Remote router's SSID, security mode, cipher type and security key. 2. Remote router's LAN IP address.

-----------------------------------------------------------------------------------------------

As for specific procedures, please refer to Method One: Setup by Web -based Management Page. 2.4 Verify Internet Connection After the above configurations, you can verify the connection by pinging the remote router s IP. Steps are described as follows (Take W in7 OS for example):

1. Click Start and input cmd in the marked field ;

2. Enter "ping 192.168.0.1 " (remote router s IP) and press Enter. If you see a similar screen as shown below, the bridge is established successfully. 10 Chapter 2 Internet Connection Setup Tip --------------------------------------------------------------------------------------

If ping failed, repair the IP address on your PC to ensure the gateway is assigned from the remote router.

-----------------------------------------------------------------------------------------------

2.5 Join Your Wireless Connection Having finished above settings, you can search for the device's default wireless network (SSID) from your wireless devices (notebook, iPad, iPhone, etc) and enter a security key to connect to it wirelessly. Tip --------------------------------------------------------------------------------------

1. By default, the range extender's SSID is Tenda_XXXXXX, where XXXXXX is the last six characters of the device s MAC address. You can find its MAC address on the label on the bottom of the range extender. 2. To join your wireless network, the PC you use must have an installed wireless network adapter. If not, install one.

-----------------------------------------------------------------------------------------------

Win7 OS 1. Click on the icon at the bottom of the right corner on your desktop;

Tip -------------------------------------------------------------------------------------

If you cannot find the icon, try disabling the wired network adapter or unplug the Ethernet cable from the wired network adapter of you r PC and refresh your desktop. If the problem remains unsolved, click Start>Control Panel>Network and Internet>Network and Sharing Center, right click Wireless Network Connection and select Connect/Disconnect. Steps for follow-up are similar to the following.

-----------------------------------------------------------------------------------------------

11 Chapter 2 Internet Connection Setup 2. Select the wireless network you wish to connect and click Connect. 3. Enter the security key and click OK. 12 Chapter 2 Internet Connection Setup 4. W hen you see Connected displayed next to th e wireless network you selected, you have connected to the wireless network successfully. Windows XP OS 1. Right click M y Network Places from your PC's desktop and select Properties. 13 Chapter 2 Internet Connection Setup 2. Right click Wireless Network Connection and select View Available Wireless Networks . 3. Double click the wireless network you wish to connect. 4. Enter the security key and click Connect. 5. W hen you see Connected displayed next to the wireless network you selected, you have connected to the wireless network successfully. 14 Chapter 3 Advanced Settings Chapter 3 Advanced Settings 3.1 Wizard Here you can configure the devices working mode. For specific configurations, please refer to Chapter 2 Internet Connection Setup . 3.2 System Status This section displa ys the devices current system info. 15 Chapter 3 Advanced Settings 3.3 Wireless 3.3.1 Wireless Basic Settings This section allows you to manage your wireless network. 1. SSID: This is the public name of your wireless network. It is preset to

"Tenda_XXXXXX" (where "XXXXXX" represents the last six characters in device MAC address.) by default. Please change it for better security. Note that this field should not be left blank. 2. Network Mode: Select a correct mode according to your wireless clients. 11b mode: Select it if you have only 11b wireless devices in your wireless network. Up to 11Mbps wireless rate is supported on this mode. 11g mode: Select it if you have only 11g wireless devices in your wireless network. Up to 54Mbps wireless rate is supported on this mode. 11b/g mixed mode: Select it if you have 11b and 11g wireless devices in your wireless network. Up to 54Mbps wireless wireless rate is supported on this mode. 11b/g/n mixed mode: Select it if you have 11b, 11g and 11n wireless devices in your wireless network. In this mode wireless connection rate is negotiated. Up to 300Mbps wireless rate is supported on this mode. 3. SSID Broadcast: Select Enable/Disable to make your wireless network visible/ invisible to any wireless clients within coverage when they perform a scan to avail able networks. W hen disabled, wireless clients will have to first know this SSID and manually enter it on their devices if they want to connect to the SSID. 16 Chapter 3 Advanced Settings 4. AP Isolation: W hen its enabled, clients connected to the same SSID will be isolated. 5. Channel: For optimal wireless performance, you may select the least used channel. It is advisable that you select an unused channel from the drop down list, or Auto to let the range extender detect and select the best possible channel for your wireless network to ope rate on. 6. Channel Bandwidth: Select a proper channel bandwidth to enhance wireless performance. Available only in 11b/g/n mixed mode. 7. Extension Channel Available only in 11b/g/n mixed mode. 8. WMM-Capable: W MM is QoS for your wireless network. Enabling this option may better stream wireless multimedia data (such as video or audio). 9. ASPD Capable Select to enable/disable the auto power saving mode. We recommend you disable it. Tip --------------------------------------------------------------------------------------

1. The default primary SSID is Tenda_XXXXXX. XXXXXX is the last 6 characters of the MAC address, which you can get from the label on the device. 2. If you are not familiar with these configurations, it is advisable that only the primary SSID and chann el should be modified.

-----------------------------------------------------------------------------------------------

3.3.2 Wireless Security This section allows you to encrypt your wireless network to block unauthorized accesses and malicious packet sni ffing. To secure your wireless network:

1. Select the SSID you wish to secure;

2. Configure its security mode, W PA Algorithms and security key;

3. Click OK to save your settings. 17 Chapter 3 Advanced Settings 1. Open W ireless speed rate can reach up to 54Mbps if Open is selected. 2. Shared: W ireless speed rate can reach up to 54Mbps if Shared is selected. 3. Default Key: Select a key to be effective for the current W EP encryption. For example, if you select Key 1, wireless clients must join your wireless network using this Key 1. 4. WPA-PSK W PA personal, supports AES, TKIP and TKIP+AES cipher types. Note: Usually TKIP&AES is not optional. 5. WPA2-PSK W PA2 personal, support AES , TKIP and TKIP+AES cipher types. 6. Mixed WPA/WPA2 -PSK: If selected, both WPA -PSK and W PA2-PSK secured wireless clients can join your wir eless network. 7. AES: If selected, wireless speed can reach up to 300Mbps. 8. TKIP: If selected, wireless speed can reach up to 54Mbps. 9. TKIP+AES: If selected, both AES and TKIP secured wireless clients can join your wireless network. 10. Security Key: Must be between 8~63 case -sensitive ASCII characters or 8~64 Hex characters. Tip --------------------------------------------------------------------------------------

For better security, compatibility and wireless speed, we recommend the WPA-PSK and AES.

-----------------------------------------------------------------------------------------------

3.3.3 Access Control Specify a list of devices to "Permit" or "Forbid" a connection to your wireless network via the devices MAC Addresses. Click Wireless -> Access Control 18 Chapter 3 Advanced Settings to enter the configuration screen. There are three options available: Disable, Forbid and Permit . Wireless Access Control Application Example:

To only allow your own notebook at the MAC address of C8:3A:35:C2:CA:E7 to join your wireless network. Configuration procedures:

1. Select the SSID you wish to configure access control;

2. Select Permit;

3. Enter the MAC address. 4. Click Add;

5. Click OK to save your settings;

Tip -------------------------------------------------------------------------------------

1. Up to 16 wireless MAC addresses can be configured. 2. If you don't want to configure the complex wireless security settings and want to disallow others to join your wireless network, you can configure a wireless access control rule to allow only your own wireless de vice.

-----------------------------------------------------------------------------------------------

19 Chapter 3 Advanced Settings 3.3.4 Wireless Connection Status Click Wireless > Wireless Connection Status , here you can see a list of wireless devices connected to the range extender. Tip -------------------------------------------------------------------------------------

You can know whether there are unauthorized accesses to your wireless network by viewing the wireless client list.

-----------------------------------------------------------------------------------------------

3.4 Tools 3.4.1 Time Settings This section lets you configure, update, and maintain the correct ti me on the internal system clock. You can either select to set the time and date manually or automatically obt ain the GMT time from Internet. Note that the GMT time is obtained only when the range extender is connected to the Internet. 1. Time Zone: Select your current time zone. 2. Customized Time : Check it to customize time. 20 Chapter 3 Advanced Settings Tip--------------------------------------------------------------------------------------

W hen the device is disconnected from power supply, time settings on this page will be lost. However, it will be updated automatically when the device reconnects to the Internet.

----------------------------------------------------------------------------------------------

3.4.2 Upgrade Upgrade is released periodically to improve the functionality of your device, and also to add any new features. If you run into a problem with a specific feature of the range extender you could log on to our website

(www.tendacn.com) to download the latest firmware to update your device. To upgrade firmware, do the following:

1. Click Browse to locate and select the firmware file and click Upgrade to update your range extende r. 2. Device restarts automatically when the upgrade process is completed. Note-------------------------------------------------------------------------------------

1. Please verify the firmware is correct. 2. Do not power off the device when the upgrade is in process otherwise the device may be permanently damaged. W hen the upgrade is completed, the device will automatically reboot. The firmware upgrade may take a few minutes to complete so please wait for th e process to finish. you need to update the de vice's firmware via a wired connection.

-----------------------------------------------------------------------------------------------

21 Chapter 3 Advanced Settings 3.4.3 Backup/Restore This feature allows you to backup and restore current settings. Once you have configured the range extender, you can save these settings to a configuration file on your local hard drive. The configuration file can later be imported to your range extender in case the range extender is reset to factory default settings. Tip----------------------------------------------------------------------------------------

The default configuration file name is RouterCfm.cfg. You can change it as you like. For safety purpose, do not change the file extension.

-----------------------------------------------------------------------------------------------

3.4.4 Restore to Factory Default 22 Chapter 3 Advanced Settings Click the Restore To Factory Default button to reset the range extender to its factory default settings. 1. Default IP Address: 192.168.0.254 2. Default Subnet Mask: 255.255.255.0 3. Default Password: admin Note-------------------------------------------------------------------------------------

1. Once this device is restored to factory default, you need to reconfigure the device for Internet access as well as many other settings includ ing wireless settings. 2. It is not advisable to restore the device to factory default settings unless our technical supporters recommend you to do so.

-----------------------------------------------------------------------------------------------

3.4.5 Change Password This section allows you to change login password and user name for accessing the devices Web-based management interface. 1. Old Password: Enter the old password. If you use the device for the first time, the password is admin by default. (Not e: Password cannot be retrieved once forgot) If you already changed the password and unfortunately forget, restore the device to factory defaults. 2. New Password: Input a new password. Password must include 1 ~ 12 characters without any space. 3. Confirm New P assword: Re-enter the new password for confirmation. Tip -------------------------------------------------------------------------------------

1. For security purpose, it is highly recommended that you change the default login password as part of the init ial configuration of your range extender. 23 Chapter 3 Advanced Settings 2. Only numbers and alphabets can be included in the password ( 1~12 characters). If no character entered, it has no password.

----------------------------------------------------------------------------------------------

3.4.6 Syslog Here you can view the history of the devices actions. After 150 entries, the earliest logs will be cleared automatically. 3.4.7 Reboot This section allows you to reboot the device. Rebooting the device will activate any modified set tings on this device. W hile rebooting, all connections will be lost and reconnected automatically later. 24 Chapter 4 Appendix Chapter 4 Appendix Appendix 1 Configure IP In this section we explain how to configure your PCs TCP/IP settings. Win7 OS 1. Click Start ->Control P anel;

2. Enter Control Panel and click Network and Internet ;

3. Click Network and Sharing Center ;

25 Chapter 4 Appendix 4. Click Change adapter settings ;

5. Right click Local Area Connection and select Properties;

6. Select Internet Protocol Version 4(TCP/IPv4) and click Properties;

26 Chapter 4 Appendix 7. Select Obtain an IP address automatically and click OK to save the configurations. Windows XP OS 1. Right click M y Network Places and select Properties;

2. Right click Local and select Properties;

27 Chapter 4 Appendix 3. Select Internet Protocol ( TCP/IP) and click Properties;

4. Select Obtain an IP address automatically and click OK to save the settings. 28 Chapter 4 Appendix Appendix 2 Default Settings Parameters Default Settings Default Access http://re.tendacn.com Web Login Default Password admin W ireless Setup Enabled Primary SSID Tenda_XXXXXX (XXXXXX is the last 6 characters of the MAC address) Working Mode 11/b/g/n Mixed W ireless Settings SSID Broadcast Enabled AP Isolation Disabled Channel Auto Channel Bandwidth Extension Channel 20/40 Auto W MM Capable Enabled APSD Capable Disabled Security Mode Disabled Tools Time GMT+08:00 Beijing, Chongqing, Hong Kong, Urumqi 29 Chapter 4 Appendix Appendix 3 FAQs This section provides solutions to problems that may occur during installation and operation of the device. Read the following if you are running into problems. If your problem is not covered here, please feel free to go to www.tendacn.com to find a solution or email your problems to: support@tenda.com.cn. We will be more than happy to help you out as soon as possible. Q: I entered the devices default access re.tendacn.com in the web browser but cannot access the utility. What should I do?

a. Check whether device is functioning correctly. The P W R LED should blink after device is powered up. If it does not light up, then some internal faults may have occurred. b. Verify physical connectiv ity by checking whether a corresponding ports link LED lights up. If not, try a different cable. c. Verify your PC obtains IP address automatically or configure the IP manually by keeping the IP in the same network segment with the devices LAN IP (192.168.0.1~192.168.0.253). d. Press the RESET button with something pointed for about 7 seconds to restore the device to factory default settings and re -login. Q: What should I do if I forget the login password to my device?

Reset your device by pressing the R ESET button for over 7 seconds. Q: M y computer shows an IP address conflict error after having connected to the device. What should I do?

a. Check if there are other DHCP servers present in your LAN. If there are other DHCP servers except your range extender, disable them immediately. b. The default IP address of the device is http://re.tendacn.com ; make sure this address is not used by another PC or device. In case that two computers or devices share the same IP addresses, change either to a different address. 30 Chapter 4 Appendix Appendix 4 Remove Wireless Network from your PC If you change wireless settings on your wireless device, you must remove them accordingly from your PC; otherwise, you may not be able to wirelessly connect to the device. If you are using Windows XP, do as follows:

1. Right click M y Network Places and select Properties. 2. Click Wireless Network Connection and then select Properties. 3. Click Wireless Networks , select the item under Preferred networks and then click the Remove button. 31 Chapter 4 Appendix If you are using Windows 7, do as follows:

1. Click Network from your desktop and select Properties. 2. Select Manage Wireless Networks . 3. Click the wireless connection and select Remove network . 32 Chapter 4 Appendix Appendix 5 Safety and Emission Statement CE Mark Warning This is a Class B product . In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. This device complies with EU 1999/5/EC. NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable . FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This eq uipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following meas ures:

- Reorient or relocate the receiving antenna.

-

Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 33 Chapter 4 Appendix The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Radiation Exposure Statement This equipment com plies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.

(2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable. 34

www.tendacn.com Made in China Wireless N300 Universal Range Extender Model: A301 Default Access:

http://re.tendacn.com MAC Password: admin Power: AC100-240V 50/60Hz 0.1A Serial BEE CE CI jes

CERTIFICATE OF COMPLIANCE Authorized under Declaration of Conformity according to 47 CFR, Part 2 and Part 15 of the FCC Rules. The product listed in follows was (were) tested in the BTL EMC Laboratory to comply with the criteria limits Class B of conducted and radiated emissions of the Technical Standards FCC Part 15, Subpart B, established by the FCC, USA. Equipment Wireless N300 Universal Range Extender Model Name A301 Brand Name Tenda Applicant Address SHENZHEN TENDA TECHNOLOGY CO.,LTD 6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052 FCC Part 15, Subpart B: 2014 ANSI C63.4-2014 BTL-FCCE-1-1509C314 Standard(s) Report(s) The test data, data evaluation, and equipment configuration contained in our test report(s) above was(were) obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Andy Chiu Authorized Signatory BTL INC. B1, No. 37, Lane 365, YangGuang St., Nei-hu District, Taipei City 114, Taiwan. TEL:+886-2-2657-3299 FAX:+886-2-2657-3331