HeimVision FHD Smart WiFi Camera Manufacture Shenzhen VanTop Technology & Innovation Co., Ltd Product 1080P FHD SMART Wi-Fi Camera Model HM203 Dear users, you are welcome to choose this product. Before using the product, please read the instruction manual carefully and keep it for later reference 1Main Function Description Embedded Processor GK7102 system OS sensor Video coding resolution video frame lens view angle digital zoom Day and night IR LED LINUX 1/2.7" CMOS GC2033 Smart H264+
2.0MP/1080P 15fps 3.6MM/F2.3 110 4X IR_CUT filter 6pcs 850nm audio coding G.711 audio input output method build-in MIC build-in SPEAKER normaleventnone record storage playback SDcloud SDcloud PTZ alarm network interface Horizontal Vertical auto tracking preset motion detection sound detection siren alarm notification Wi-Fi protocol TF reset LAN power temperature environment humidity size 355 95 support support support support support phoneEmail 802.11b/g/n 2.4G TCP/IPHTTPDHCPAmazon cloudP2P up to 128G support RJ45 Micro USB 055 10%90%
12.7cm*9.85cm*20.55cm weight 175g 2How To Download Mobile APP Search and download YCC365 Plus in Apple Store or Android app store. Scan the QR code as below 3How To Operate The Mobile APP 3.1 Register an account When you use this app at the first time, you need to use your email to register an account, click Sign Up and set a password according this procedure.
*If you forget your password, you can reset your password, just click "Forgot password on the login page.
*Password should be at least 6 characters and not longer than 30 characters. It should be a combination of letters and numbers. Tips: the current version only supports mobile phone number registration in Vietnam. Please use email to register in other areas 3.2 Add camera Note: the camera only supports 2.4G WIFI, before adding devices, make sure your router is 2.4G WIFI, and your phone is connected to 2.4G WIFI. 3.2.1Scan QR code to add Please make your phone connect to the Wi-Fi, and then click Device adding by scanning the code, reset the camera, after hearing the voice Please configure camera by scanning code or AP hotspot, please click the Connect to the network. Select your own Wi-Fi and login with your password. Align the two-dimensional code displayed on the phone with the camera lens, maintain a distance of 4-8 inches and keep balance. Click I heard the beep voice after hearing the beep, a few seconds later, you will hear the voice Internet connected welcome to use cloud camera. 3.2.2 Addition by connecting to network cable (Only support Lan port device) Please connect Ethernet cable between camera and Wi-Fi router. After your phone connect to the Wi-Fi, Click Add device and Addition by connecting to network cable Please scan the QR code on the device and wait for the network connection to succeed . 3.2.3 Addition of AP hotspot After your phone connect to a Wi-Fi , please click Add device and Addition of AP hotspot, reset the camera, after hearing the voice Please configure camera by scanning code or AP hotspot, please click the Connect to the network. Follow the wizard make your phone connect to CLOUDCAM_XXXX network and Return to YCC365 plus app. Click Next and Select your own Wi-Fi and login with your password. Hear the voice Internet connected welcome to use cloud camera and wait for the Wi-Fi connection to succeed. 3.3 AP Direct mode (special) Power up the camera and hear the voice "Please configure camera by scanning code or AP hotspot" (if you don't hear the voice, reset the camera Press the reset button for two seconds and hear the voice "Enter AP access mode after reboot" (The camera will no longer be voice broadcast after restarting). Make your phone connect to CLOUDCAM_XXXX network . Open the YCC365 plus app to enter the login interface, click the setting icon in the upper right corner . Click AP networked device preview and Click Next . Scanning the device in the Wi-Fi network , then click the device . Enter user name: YCC365 password: 0123456, click CONFIRM, then you can preview the screen. 4 Function introduction Real-time preview interface Screen A:Parameter Menu B:Snapshot D:Video C:Full E:pan-tilt reset F:Preset G:Pan&Tilt H:Message I:Video quality J:Hold to talk L:Sound K:More playback Control white light View cloud albums Video to the phone. 4.1 PTZ/ Preset PTZ By sliding steering wheel or sliding the screen on the live preview can control the camera's rotation . Preset 1Click the preset icon to enter the preset management interface. 2Add the preset: several presets can be added. 3Delete the preset: click the edit icon to delete the preset that has been added. 4.1.1 Add the preset 4.1.2 Delete the preset 4.2 Video playback Gentle hint : video playback by default is cloud recording , if you want to playback the video on the TF card , you can switch play videos from to SD card. Cloud video has color discrimination, dark blue indicates the alarm recording and light blue indicates non-alarm recording. TF card video color uniform light blue. Click the date icon to playback the video of the selected date. Click icon can adjust the cloud video playback speed, but TF card playback does not support. 4.3 Video clip Gentle hint: Only the cameras with cloud service package have this feature. Drag the playback cursor and click the clip icon, select start time and click save to the cloud album , enter the video name and click save. 4.4 Download cloud video / share cloud video Click the cloud album icon and click the video clip, click Download to save the video to your phone or click Share to share your Video on Facebook and YouTube. 4.5 cloud video playback Click Message to view the alarm video. 5 Preferences Click in the preview screen, check the parameter menu Rename the device name Add closure plan Shared with other users 5.1 Cloud Storage service We offer 30-day-long cloud service, everyone can enjoy the cloud storage service for free, after that you can choose to pay for the service with a low cost. ASelect Cloud service and check Subscription packages BThere are three kinds of subscription packages for you, you can choose to pay for this service by monthly or yearly. CWe support PayPal payment system, click Go to PayPal now and then finish the payment ( please install PayPal app in advance ) 5.2 Set TF card recording Mode Insert the TF card into the card slot and power on the camera. TF card requirements1Memory space 8-128G 2C10 TF card 3use after formatting. 4 Recommend Kingston/SanDisk/Samsung Click SD card status to check it Click Video Mode to select the video mode of TF card. 5.3 Notification settings Turn on the sound switch,detect abnormal sound triggering message push Turn switch,detect on the motion the motion triggering message push Set the frequency of message push the email Turn on notifications,detect motion sound triggering send e-mail or Gentle hintOnly the cameras with cloud service package support mail delivery. 5.4 Other functions settings HD video: switch the quality of pic HD / SD Device Microphone: Open / Close the microphone Night Vision 1Off, close the night vision 2On, always open night vision 3Auto, automatic switchover Rotate The Video Feed 180Flip the picture when the camera is installed under the roof. Wi-Fi Network: Change the Wi-Fi on the device. Note: The Wi-Fi must be searchable, if the location changed and the Wi-Fi is different, please reset and connect to a new Wi-Fi again. Device DetailsCheck the ID and the number of the software\hardware of the device. Remove DevicePlease remove the camera in your account if you need to use another account to add the camera. 6Split screen to watchOnly for multiple equipment under the same account 7 How to use a camera on a computer Log In 8 Frequently asked questions 1Cant add the device APlease make sure the camera has been reset. Press the Reset button until hear the prompt tone BOnly support 2.4GHZ Wi-Fi, if your Wi-Fi router is 5GHZ, please switch to 2.4/5GHZ dual mode. CPlease turn on the GPS service before adding the device on the Android mobile phone . After installation is complete, you will be asked to turn on GPS service when you use the app at the first time, if you choose not to turn on the GPS service, please uninstall and reinstall the app again DPlease confirm the camera wasnt binding by the other account. There are four voice prompts in the progress 1Please configure camera by scanning code or AP hot spot 2Select your Wi-Fi and login with your password, after the device makes a noise like beep you will hear this Please wait for Wi-Fi connecting. 3Please wait for internet connecting after getting the Internet ip address. 4Internet connected welcome to use cloud camera AIf you cant go to the second step, please check your Wi-Fi channel is not hidden, and the Wi-Fi router cant be so far from the camera. If this way doesnt work, please scan the QR code to add the camera. BIf you cant go to the third step, please reduce the number of the Wi-Fi users, and delete the special characters of your Wi-Fi password. CIf you cant go to the forth step, please try again, if it still doesnt work, please contact the seller. 3Why does it have a interval while the video is recording to the TF card The size of the video file is limited. Once the video size close to the critical value, the video file will be created and the next video will continue to be recorded, there is a interval but so short. 4The TF card cant be identified Please check the TF card if it meets the quality requirements, when the Wi-Fi signal is not good, it also cant be identified. 5The video recording timeline is blank after the cloud service expired. The video cant be replayed after cloud service expired, if there is no TF card in the camera, the video cant be recorded. If the TF card is always working, but the video files disappeared, please check the Check TF card state, if it is normal in the App but no video has been recorded, please format the TF card. If it still doesnt work, please get a new TF card and try again. 6Why I cant get the notifications on my phone Make sure the App get the message pushing rights Otherwise, when you are watching the real-time video in the App, there is no warning notifications, because its unnecessary to send notifications when you are watching the video online. Advanced message push system, the warning notifications wont be pushed to your phone all the time but it will record all the messages and videos. 7Camera disconnect Please check the power and the Internet then restart the camera. If this way doesnt work please remove the camera and add it again in the App. 8Circle in the video, video runs slowly Circle in the video means its still loading, please check your network environment. 9How do the other people watch the video?
Share the App account with the other people. 10How many people can use the account simultaneously. There is no theoretical limit. 11Why adding camera to another account would fail?
One camera one account, if the other account needs to add the camera, please remove the camera in the current device. 12How can I get my camera connected to the other Wi-Fi. Two ways:
AWhen you need to change to another Wi-Fi without moving the place. Parameter setting >> Wi-Fi Network >> select the Wi-Fi B: When the camera is moved to another place, please start the camera, you will see the Device disconnected on the main page, and then click TROUBLESHOOT to connect to the Wi-Fi again. After sales instruction 1The product will be updated in real time, if there is update, it will not be noticed anymore, please visit our official website for reference. 2Introductions of the basic function of the products are included in the instruction, please users to read all the information carefully. 3lf any problems occur in the usage of the video camera, please contact the Seller 4We have made every effort to ensure the completeness and correctness of contents of the instruction, but there may still some deviations between part of the data and the actual situation, if you have any question or dispute, 5Losses caused by operating without following the instruction of the manual book should be assumed by users. This instruction applies to consumer product. Kindly reminder: if the instruction is updated, it will not be noticed any more, dual video recording memory (TF card/cloud storage) is supported by the video camera; to better safeguard safety of video recording, users could select multiple cloud video recording mode for video camera via service channels, choosing for monthly/yearly payment for storage. FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with Minimum distances 20 cm between the radiator include antenna & your body. IC WARNING This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device ADVERTENCIA IC Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes :
(1) Cet appareil ne doit pas causer d'interfrences.
(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil. Operation Frequency:
Channel numbers:
2412MHz~2462MHz (802.11b/802.11g/802.11n(H20)) 2422MHz~2452MHz (802.11n(H40)) 11 for 802.11b/802.11g/802.11n(H20) 7 for 802.11n(H40) Channel separation:
5MHz Antenna Type:
Integral Antenna Antenna gain:
3.0dBi