FCC ID: 2A7OT-F2 Portable Apple Watch Charger

Portable Apple Watch Charger User Manual Schematic Diagram This product is designed in a portable design, we wanted to make charging your Apple Watch utterly effortless. Simply hold the connector near the back of the watch, where magnets cause it to snap into place automatically. It charges all Apple Watch models and sizes.You can give emergency power to the Apple Watch when you are outdoors. Key buckle Tech Specs:

Input: 5V / 1A Output: 5V/1A Capacity: 1200mAh Battery Type: Polymer battery Product Size: 78x37x12mm FCC ID2A7OT-F2 Packing list:

1 .Power Bank 1pcs 2.Charging Cable 1 pcs 3.User Manual 1pcs BATTERY INDICATO R WATCH CHARGING AREA INPUT PORT OPEN THE KEY Manufacturer:Shenzhen View Lighting Technology Co.,Ltd 1 .Click the power button to turn on the power output, and the battery indicator light turns on, and the Apple Watch can be attached to the magnetic charging position for charging. If the charger does not detect the Apple Watch within 45 seconds, it will automatically turn off. 2.Double-click the power button to turn off the power output. 3. Four LED indicators to indicate the current battery capacity, one to four LEDs indicate the current power is 25%,50%,75%,100%. 4.When only one LED is flashing, it indicates that the battery is too low and needs to be charged.Plug in the charging cable, connect the charger, and the battery indicator light starts flashing to indicate that it is charging. The battery indicator shows the current charging capacity.When all four LEDs are on, the battery is fully charged. 5.After the Apple Watch is fully charged, you need to remove the watch and double-click the power button to turn off the power output. Attention: The magnet attraction of the charging position is the role of the Apple Watch in aligning the position when charging. It can't be used as a function to fix the watch. Please put it horizontally and do not move when charging. Do not hang or sway, otherwise the Apple Watch may fall off and cause damage. 1 .Please don't dismount and remodel the product. 2.Pay attention to water-proof, moisture-proof. 3.Please don't charge in hot environment. 4.Please stop to use immediately if battery is bulge, leaking or smell. 5.Please stop charging immediately when the product temperature is high. FCC warning:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure require ment. The device can be used in portable exposure condition without restriction.

Labels location Model: F2 FCC ID: 2A7OT- F2 Input : 5V1A Output : 5V1A Capacity : 1200mAh Manufacturer : Shenzhen View Lighting Technology Co., Ltd Fecea z Made in China

C5266091_X24_Ed.1 Attestation Statements TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules for covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List1, which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) that prohibit equipment authorization Applicant Company name: Shenzhen View lighting Technology Co.,Ltd Grantee code:

FCC ID:

Contact Name:

Address:

Street, Longhua District, Shenzhen City Telephone No:

Fax No:

Email:

77418809@qq.com 13620214161 2A7OT 2A7OT-F2 Rusheng Shen 301, Building d, Xinwei Third Industrial Zone, Xinshi Community, Dalang i. ii.

[Shenzhen View lighting Technology Co.,Ltd] certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification.

[Shenzhen View lighting Technology Co.,Ltd] certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing covered equipment. The applicant must sign this certification. Date: 2023.02.07 Applicants Name: Rusheng Shen Title: Manager Signature 1 The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist 1/1

<Shenzhen View lighting Technology Co.,Ltd>

C5266091_X10_Ed.2 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2022.11.10 Subject: Request for Confidentiality FCC ID: 2A7OT-F2 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality Short-Term Confidentiality NOTE 2 No No No No No NOTE 1 NOTE 1 No No No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name: Rusheng Shen Title: Manager 1/1

C5266091_X8_Ed.1 Letter of Authorization Company: Shenzhen View lighting Technology Co.,Ltd Address: 301, Building d, Xinwei Third Industrial Zone, Xinshi Community, Dalang Street, Longhua District, Shenzhen City Product Name: Portable Apple Watch Charger Model Number: F2 FCC Identifier: 2A7OT-F2 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Rusheng Shen Date: 2022.11.10 Title: Manager Signature of applicant:

1/1

US Agent for Service of Process LETTER OF ATTESTATION US Agent for Service of Process:

This letter is to confirm that the US Agent for Service of Process accepts responsibility to act as a local representative on behalf of (Shenzhen View lighting Technology Co.,Ltd) The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911.