FCC ID: 2BDA3-I35 i35 Bluetooth Earphones

160x90MM 2 YEARS GLOBAL WARRANTY!

Thank you for purchasing!

This manual will guide you to use this headset Tips:

1.Ensure safety, please follow the rules mentioned in this manual. Before using the headset, we strongly recommend you read this manual;

2.Please pay attention to sharp edges, uneven surfaces, metal parts, accessories and packaging to avoid any possible damage;

3.Please do not dismantle and repair this productby yourself. This may cause complete damage, which are not covered by the warranty;

4.Please do not wipe this product with oil or othercorrosiveliquid;

5.Please do not use this product in dangerous places. Bluetooth version range USB-c port 20-20KHz In-line control answering/hanging up/rejectingcalls, power on and off,volume adjustment, listening to music, pause, play, switch songs up and down. Support Google/iOS voice assistant. Support any type of mobile phone with device, IPAD, tablets, laptops, desktop computers. Desktop computers withoutbluetooth function mustbe used withbluetoothadapters. Operating:

Play/Pause: Press button to play/pause music;

Volume up: Keep press button ' + ' to increase volume;

Volume down: Keep press button - to decrease volume;

Next song: Short press'+' button to play the next song;

Previous song: Short press '-' button to play the previous song;

Power off: Keep press button '' for 3 seconds to turn it off;

Low battery: The red indicator light flashes slowly, and there is a low battery prompt 'The battery is low, please charge') Charge: plug the charger into the headset charging port (the red indicator light is on);

Answer or end phone call: Click button ;

Reject phone call: Press button for 2seconds;

Dial the last call: In standby mode or playing music mode double-click ;

Conversion mode: long press the MODE button for about 3 seconds;

Chinese and English conversion: Power on without pairing, double-click button;

Start the voice assistant: Quick click the button '' twice to activate 'Siri or Google voice assistant Charging:

Connect the USB-C cable with headphones charging port. When charging the indicator light is red, after fully charged the indicator light go off. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition, compliance with exposure requirements. 1.Keep the distance between the mobile phone and the headset within one meter, the closer the better. 2.Press the power button for 3seconds and release when the indicator light flashes red and blue alternately, the headset has entered the pairing mode. 3.Turn on thebluetoothfunction of the mobile phone, search for devices, and click 'i35' to connect. When the connection is successful, the headset indicator light flashes blue slowly. 4.After the pairing is completed, the headset and the mobile phone will remember each other, and there is no need to pair them again next time you use it. When the mobile phone is turned on, the headset will automatically connect after turning on.

Page 1 of 1 FCC ID: 2BDA3-I35 LABEL AND LOCATION i35 Bluetooth Earphones Model: i35 FCC ID: 2BDA3-I35

(Size: L 3.0cm x W 1.0cm) Label Location Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster@lcs-cert.com | Web: www.lcs-cert.com Scan code to check authenticity

Shenzhen XingYida Technology Co., LTD. Room 1D211,CD Block 1,Floor 1,Longsheng Mobile Ph- one Market,No.5,Huafa North Road,Fugiang Community Huagiang North Street, Futian District, Shenzhen China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-11-3 To whom it may concer:

We, Shenzhen authorization is sought (FCC ID: 2BDA3-I35) is not covered equipment prohibited from receiving an gYida Technology Co., LTD., hereby certify that the equipment for which equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www foc. gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 DO1 Shenzhen XingYida Technology Co., LTD. Room 1D211,CD Block 1,Floor 1,Longsheng Mobile Ph- one Market,No.5,Huafa North Road,Fugiang Community Huagiang North Street, Futian District, Shenzhen China Sincerely, ae fiw be Signature Jingjuan He sales Shenzhen XingYida Technology Co., LTD.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2023-11-3>

Pursuant to Paragraphs 0.457 and 0.459 of the Commission's Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID Model name 2BDA3-I35 i35 For the product stated above, we request that the following information be held confidential;

Long-Term Exhibits Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days Extemal Photos Internal Photos. Block Diagram Schematics Test Setup Photos:

User's Manual Parts List Tune Up moOooARRoo Operational Descriptions:

Dopooo0ol The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Jingjuan He/sales Shenzhen XingYida Technology Co., LTD. Room 1D211,CD Block 1,Floor 1,Longsheng Mobile Ph- one Market,No.5,Huafa North Road,Fugiang Community Huagiang North Street, Futian District,Shenzhen China Phone: 0755-82525152, Fax: /

E-Mail: 1941292426@qq.com

Shenzhen XingYida Technology Co., LTD. Room 1D211,CD Block 1,Floor 1,Longsheng Mobile Ph- one Market,No.5,Huafa North Road,Fugiang Community Huagiang North Street, Futian District,Shenzhen China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-11-3 To whom it may concer:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act.on our behaffin all matters relating to applications for equipment authorization FCC ID: 2BDA3-135 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title: Jingjuan He/sales Company: Shenzhen XingYida Technology Co., LTD. Address: Room 1D211,CD Block 1,Floor 1,Longsheng Mobile Ph- one Market,No.5,Huafa North Road,Fugiang Community Huagiang North Street, Futian DistrictShenzhen China Phone: 0755-82525152 Fax: /

E-Mail: 1941292426@qq.com

_2.911(d\(7)-U, VOS

[model] US_ Agent 48_ Shenzhen XingYida Technology Co., LTD. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 41/7/2023 U.S. Agent Designation Shenzhen XingYida Technology Co., LTD. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: FCCID: 2BDA3-I35):

Name and company of U.S. agent: Bouge Tech Inc Physical U.S. address of agent: 457 E MCGLINCY LN, CAMPBELL, CA 95008 FRN of U.S. agent: 0033768409 Email address of U.S. agent: typingyang@issyzone.net Bouge Tech Inc acknowledges their obligation to accept service of process on behalf of Shenzhen XingYida Technology Co., LTD Shenzhen XingYida Technology Co., LTD.with the FRN 0034395459 accepts it ar after either the grantee has permanently s obligation to maintain an agent for service of process in the United States for no less than one ye terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 DO1. An expiration date for this letter doe the FCC within 30 days via the granting TCB. s not exist. In case the U.S. agent changes, the grantee is obligated to notify Sincerely, Jingyuan he Jo SN ZNE) Signature Signature Jingjuan He Jason-Zheng Sales Vice GM Shenzhen XingYida Technology Co., LTD. Bouge Tech Inc