FCC ID: 2ASHI-DT78 Smart bracelet Instruction manual Plateforme d'adaptation et exigences 1.Android 4.4 and above 1.Android 4.4 and above 3. Support Bluetooth 4.0 and above 2. iOS 8.5 and above 2. iOS 8.5 and above Product details Full touch display Heart rate reading sensor Charging port
(the obverse)
(back) Introduction of the function 1.Time: Time, date, remaining power are shown on the watch face.
(Once smart band connected to the device, time will be synchronized with device time. The time cannot be set on the smart band). 2.Status information: record exercise time, mileage, calories burnt, sleep quality and sleep time. 3.Message interface: Turn on notication on APP, notication will be shown on smart bracelet wherever APP notication, incoming, messages are received. 4.Sleep:The bracelet records and shows the total sleep time you had,as well as deep sleep time,light sleep time.More detailde information analysis and data record can be viewed in the APP synchronously. 7 5.Heart Rate function interface: Click into measure your current heart rate on the heart rate interface, the result will be shown afterward. More details and data are recorded and synced in the APP. 6.Blood pressure function interface: Click into measure your current blood pressure on the blood pressure interface, the result will be shown afterward. More details and data are recorded and synced in the APP. 7.Blood oxygen function interface: Click into measure your current blood oxygen on the blood oxygen interface, the result will be shown afterward. More details and data are recorded and synced in the APP. 8.Exercise mode: Click to enter in the exercise mode interface, there are eight kinds of sports modes: fast walking, running, riding, climbing, football, basketball, badminton, and table tennis. The movement time and calorie are recorded in each mode interface. 9.Photo control: Turn on the camera on the APP to control the phone to take photos. 10.Music control: after connecting with device, smart bracelet is able to control the music player. Press and hold to enter the music control panel, to paly/pause, previous song, and next song. 11.Lift the wrist screen: Turn on/o the wrist button. 12.Countdown: After clicking enter, select the time to start counting down. 13.Bright screen time: Click to enter to set the duration of the bright screen. 14.Stopwatch: Click to enter the stopwatch function, you can start/pause/end operation, right slide to exit. 15.Find the phone: When the bracelet is connected to the app, click to go to nd the phone, and the phone will ring later. 16.Settings: Includes version number, factory reset, shutdown. 17.More: IIncludes charging reminder, sedentary reminder, upgrade reminder, call reminder, alarm clock, etc. 8 USE The dial interface slides to the right to view the message. The dial interface slides up into the function list, slides up and down to switch the function list, clicks to enter the function interface, and slides right to exit. Right upper button function Short press to return to the dial Long press to shut down and reset Bright screen Lower right button function Return to the previous level Swipe down to the shortcut page with brightness adjustment, automatic brightness, and do not disturb mode. Slide left to enter the measurement heart rate screen. Long press the dial interface to switch the dial 9 APP connection method WearFit2.0 APP QR code
(WearFit2.0 allows the use of mobile app features) 1. Scan the QR code above to download or search Weart 2.0 in Android store or APP store to download and install. 2. Press and hold the touch button for 3 seconds to turn it on, open and enter the WearFit2.0 app, search for the device according to the APP connection wizard, select the device model, and complete the connection pairing. Tips: For iOS devices, please press pair the Bluetooth for the rst time connecting. Afterward, the bracelet will be able to receive the income calls, texts and more notications pushed from the iOS. 10 Weart 2.0 introduction 1. Home page, additional functions, personal information 2. Sleep module: Record the daily, weekly, and monthly sleep information in the form of chart. Base on the bracelet data to calculate the daily sleep quality and sleep time. 3. Step module: A chart will be drawn to show the steps, distance and calories burnt accordingly. Provide an insight for user of daily, weekly, and monthly data. 4. Heart rate module: Provide the detail information of your heart rate daily, weekly, and monthly. Your heart rate will be read in every hour. 5. Blood pressure module: Provide the detail information of your blood pressure daily, weekly, and monthly. Your blood pressure will be read in every hour. 6. Blood oxygen module: Provide the detail information of your blood oxygen daily, weekly, and monthly. Your blood oxygen will be read in every hour . 7. Fatigue moduleMeasure your real time fatigue and display the information for you hourly. 11 Basic parameters Screen size Bluetooth 1.4 inch Bluetooth4.0 Waterproof level IP67 Type of battery Lithium polymer battery Battery capacity Charging time bracelet size 170mAh 2 Hours 42.5mm*36.5mm*11mm Charging Magnetic chargingVoltage 5V Touch screen Full screen touch Package Smart bracelet+Magnetic charger+Instruction manual Remark 1.If there is a product quality problem or the use of products is not clear, please contact our store by direct mail, we will deal with it quickly. 2.The measurement results of this product are for reference only, not for any medical purpose and basis. Please follow the doctors instructions and do not rely on the measurement results for self diagnosis and treatment. 3.The waterproof grade is IP67, which can be used for daily life waterproof. But the bracelet can not be used for diving and put under water for long time. In addition, this product does not prevent hot water, because steam will aect the bracelet. 4.Our company reserves the righe to modify the contents of this manual without notication. Some functions are dierent in the various software version, which is normal. 12 QUALIFIDE CERTIFICATE MODEL:
DT78 CHECKER:
QA PASS FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.