FCC ID: 2AYV7YG-811 walkie-talkie

FCC compliance statementThis device complies with Part 15 of

the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received,

including interference that may cause undesired operation.

changes or modifications not expressly approved by the party

responsible for compliance could void the user s authority to

operate the equipment.This equipment has been tested and found

to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation.If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:-- Reorient or relocate the receiving antenna.--

Increase the separation between the equipment and receiver.--

Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.-- Consult the

dealer or an experienced radio/TV technician for help.

§95.393 Instructions and warnings.

Note: All controls, adjustments and switches that’s instructed

in the manual or follow-up instruction provided by the

manufacturer that may be operated or adjusted without

resulting in a violation of FCC rules

Warning: Any adjustment that could result in a violation of FCC

rules and it’s recommended that could be performed only by or

under the immediate supervision and responsibility of a

person certified as technically qualified to perform transmitter

maintenance and repair duties in this radio service by an

CAUTION: Changes or modifications i.e. replacing any

transmitter component (crystal, semiconductor, etc.) not

expressly approved by the party responsible for compliance

could void the user’s authority to operate the product.

FCC SAR statement

This equipment complies with FCC radiation exposure limits set

forth for an uncontrolled environment. End user must follow the

specific operating instructions for satisfying RF exposure

compliance. This transmitter must not be co-located or

operating in conjunction with any other antenna or transmitter.

The portable device is designed to meet the requirements for

exposure to radio waves established by the Federal

Communications Commission (USA). These requirements set a

SAR limit of 1.6 W/kg averaged over one gram of tissue. The

highest SAR value reported under this standard and should be

installed and operated with minimum distance 25mm during

product certification for use when properly worn on the face.

WALKIE TALKIE FCC ID:2AYV7YG-811 3XAA BATTERIES.1.5V MADE IN CHINA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmf ul interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Ke CE ms WALKIE TALKIE FCC ID:2AYV7YG-811 SXAA BATTERIES. 1.5V MADE IN CHINA This device complies with Part 15 of the FCC Rules, Operation is subject to the following t, Conditions: (1) this device may not cause hart!

Ul interference, and (2) this device must accept any interference received, including interferen that may cause undesired operation cE

Shenzhen yizhongge Electronic Co., Ltd

TO:

Federal Communication Commission

Equipment Authorization Branch

7435 Oakland Mills Road

Columbia, MID 21046

Confidentiality Request regarding application for FCC ID:2AYV7YG-811

Regarding:

LONG TERM CONFIDENTIALITY

Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential

treatment of the documents listed below, associated with the certification application referenced above.

Schematic(s)

Block Diagrams

Operational Descriptions

Tune up procedure

The documents above contain proprietary information not released to the public. Public disclosure of this

information may prove harmful to the business of the applicant.

Sincerely,

Print Name: Yong Huang

Signature:

Title:CEO

On behalf of Company: Shenzhen yizhongge Electronic Co., Ltd

Telephone: 86 13802207569

E-mail: 1051582235@qq.com

a)

b)

c)

d)

e)

f)

g)

SGS North America Inc.

620 Old Peachtree Road

SUITE 100

Suwanee, Georgia 30024

United States

Applicant Declaration

Applicant Legal Business Name

Shenzhen yizhongge Electronic Co., Ltd

401, building D, No.28, Xinyuan Industrial Zone, Xinmu community, Pinghu street,

Longgang District,Shenzhen 518111,China

Address

Grantee Code

FCC ID

Contact Email

Contact Phone

Authorized Contact Name

2AYV7

2AYV7YG-811

Yong Huang

1051582235@qq.com

86 13802207569

I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my

knowledge and belief.

in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in

this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules,

if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure

that production units of this equipment will continue to comply with the FCC’s technical requirements.

in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible

party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321.

in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts

and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3)

the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing.

the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED.

the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS,

FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or

software required for evaluation, review, certification and audit surveillance of products certified by SGS.

neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section

5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See

47CFR 1.2002(b) for the definition of a “party” for these purposes.

the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions.

Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47

Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm

Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html

Applicant Signature:

Date:2021-06-17

Print Name: Yong Huang

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

CEO

Applicant Declaration

Rev:0.0

Shenzhen yizhongge Electronic Co., Ltd TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID:2AYV7YG-811 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Shenzhen yizhongge Electronic Co., Ltd This authorization is valid until further written notice from the applicant. Print Name: Yong Huang Signature:

Title:CEO On behalf of Company: Shenzhen yizhongge Electronic Co., Ltd Telephone: 86 13802207569 E-mail: 1051582235@qq.com