FCC ID: QOQAP3241 Bluetooth access point

 

BLUEGIGA ACCESS DEVICES USER GUIDE Tuesday, 20 September 2011 Version 4.3 Copyright 2001 - 2011 Bluegiga Technologies Bluegiga Technologies reserves the right to alter the hardware, software, and/or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. Bluegiga Technologies assumes no responsibility for any errors which may appear in this manual. Bluegiga Technologies' products are not authorized for use as critical components in life support devices or systems. Bluegiga Access Server, Access Point, AX4, BSM, iWRAP, BGScript and WRAP THOR are trademarks of Bluegiga Technologies. The Bluetooth trademark and logo are registered trademarks and are owned by the Bluetooth SIG, Inc. ARM and ARM9 are trademarks of ARM Ltd. Linux is a trademark of Linus Torvalds. All other trademarks listed herein belong to their respective owners. TABLE OF CONTENTS 4. 3. 4.6 3.4 2.2 1. Introduction . 4 Getting started with Bluegiga Access Device . 5 2. Powering up . 5 2.1 Access Point connectors . 5 2.1.1 2.1.2 Access Server AX4 connectors . 6 2.1.3 Access Server connectors . 7 Connecting to Access Device . 8 Using UPnP . 8 2.2.1 2.2.2 Using WrapFinder . 9 Web interface . 11 2.3 2.4 Access Device software bundles . 12 Connecting Access Device to network . 13 Network interfaces . 13 3.1 3.2 Using 2G and 3G modems for Internet connectivity . 13 Using Wi-Fi . 14 3.3 Using Wi-Fi as Client (Managed) . 14 3.3.1 3.3.2 Using Wi-Fi as Access Point (Master)

. 15 Shell prompt access . 17 Management console (Access Server 229x only) 3.4.1

. 17 3.4.2 Transferring files to/from Access Device . 18 Using services . 19 Default services . 19 4.1 4.2 Managing software components (wpkgd) . 20 Bluetooth . 21 4.3 Web server . 21 4.4 System time . 22 4.5 4.5.1

. 22 Real time clock (RTC) Network time . 22 4.5.2 4.5.3 Time zones . 22 Using remote file shares . 22 4.6.1 Using NFS mount . 22 Using CIFS mount 4.6.2

. 23 4.6.3 Mounting at boot time . 23 Factory reset and complete system upgrade (reflash) . 23 Resetting default system configuration with factory reset button . 23 4.7.1 4.7.2 Complete system upgrade (reflash) . 23 Kernel, filesystem and configuration restore with "Factory Reset" memory dongle . 24 4.7.3 Using utilities . 25 Wrapid - Bluegiga Access Device System Information . 25 5.1 5.2 Changing the Bluetooth Range and EDR Performance . 25 Badctl - Bluegiga Access Device Control 5.3

. 25 Finder - Bluegiga Access Device Finder . 26 5.4 Finder Service and Command . 26 5.4.1 5.4.2 Finder Protocol . 27 Smsgw - Bluegiga SMS Gateway . 27 5.5 5.6 Watchdog - Bluegiga User Level Watchdog . 28 Using 3rd Party Peripherals . 30 Using USB, Compact Flash or microSD Memories . 30 6.1 6.2 Using USB sound cards . 31 6.3 Using USB webcams . 32 Licenses, Warranty, Certification Information and WEEE Compliance . 33 Access Point Certification Information and WEEE Compliance . 33 7.1 7.1.1 WEEE Compliance . 35 Access Server Certification Information and WEEE Compliance . 35 7.2.1 WEEE Compliance . 37 Appendices . 40 8.1 Access Device directory tree . 40 Tested 3rd Party Peripherals . 41 8.2 Available Software Packages . 49 8.3 8.4 Enabled Busybox Applets . 55 Contact information . 61 7.2 4.7 6. 7. 8. 9. 5. 1 Introduction Bluegiga Access Server product family offers cutting-edge wireless management tools - enabling you to create efficient and scalable networks. The open and adaptable platform enables you to meet your applications' and customers' needs. routers, Access Points and Bluetooth Bluegiga Access Server AX4 is a powerful Linux based wireless connectivity platform targeted for eHealth, point-of-sale, proximity marketing, captive portal, and long range integrates three high performance class 1 radios, 802.11b/g radio and optional 2G or 3G modem. connectivity applications. The AX4 Bluetooth Bluetooth Bluegiga Access Point 3241 is designed for various health and medical applications, marketing, industrial telemetry applications, point of sales systems and digital pens. It provides with +20dBm Bluetooth Bluetooth also with class 2 output power and a low noise amplifier 1000 meters long range between other Access Point 3241 or device with matching output power and receiver sensitivity. Improved receiver sensitivy extends range devices like mobile phones. proximity Bluetooth Bluetooth Bluegiga Access Point 3201 is a size-optimized access device targeted at business applications. The product is designed to fit into wireless management are important design drivers. applications where network performance, reliability, scalability and easy Bluetooth Access Point 3201 is an evolution from Bluegiga's extremely reliable and successful Access Server product family. Access Point product software and user interface make it compatible with Bluegiga Access Servers. Access Points can be remotely managed from a centralized location with Bluegiga Solution Manager (BSM), a web-based remote management and monitoring platform. Access Server is a cutting edge wireless including ethernet, WiFi, and GSM/GPRS/3G enabling full media-independent TCP/IP connectivity. Access Server is easy to deploy and manage in existing wired and wireless networks without compromising speed or security. For rapid deployment, Access Server configurations can easily be copied from one device to another by using USB memory dongles. The device can be fully managed and upgraded remotely over SSH secured links. Large numbers of Access Servers can easily be controlled using Bluegiga Solution Manager (BSM). router. It supports multiple communication standards Bluetooth Usage scenarios and applications:

Medical and health device gateways Proximity marketing Point-of-sale and retail systems Telemetry and machine-to-machine systems Industrial gateways Bluetooth Key features:

Bluetooth Bluetooth Open Linux platform for adding local customer applications Turn-key applications for Supported Software-configurable range to up to 100 meters (up to 1000 meters with Access Point 3241 or Access Server AX4) External and internal antenna options Supports all key communication medias:

profiles: SPP, ObjP, FTP, PAN, LAP, DI, HDP proximity marketing networking and Bluetooth Bluetooth Ethernet WiFi, 2G/3G and NFC supported via USB (Access Server supports also via Compact Flash, AX4 has built-in support for WiFi and 2G/3G) USB and RS232 Fast and easy to install Uncompromised security: SSH, firewall, and 128 bit Bluetooth, CE, FCC and IC certified Compliant with 1.1, 1.2 and 2.0 Specification (2.1 support with eHealth software) encryption Bluetooth Bluetooth Copyright 2000-2011 Bluegiga Technologies Page 4 of 61 2 Getting started with Bluegiga Access Device Access Point and Access Server can be controlled in four ways:

by using Bluegiga Solution Manager (see by using the WWW interface by entering commands and using applications at the shell prompt by sending and/or retrieving files to/from the device. BSM documentation for details) The default username is root and the default password is buffy

. 2.1 Powering up To get started with Access Point or Access Server, connect it to your local area network (LAN) by using an ethernet cable, and connect the power adapter. The unit will power up and retrieve the network settings from your network's DHCP server. Access Devices will also use Zeroconf (also known as Zero Configuration Networking or Automatic Private IP Addressing) to get a unique IP address in the 169.254.x.x network. Most operating systems also support this. In other words, you can connect your controlling laptop with a cross-over ethernet cable to Access Server, then power up Access Server, and the devices will automatically have unique IP addresses in the 169.254.x.x network. With Access Point and AX4, also a direct ethernet cable works. If you need to configure the network settings manually and cannot connect Access Server first by using Zeroconf, you can do it by using the management console. Access Point and AX4, however, do not provide user access to the management console. You can configure static network settings by sending the settings in a management packet for example using a USB memory dongle. 2.1.1 Access Point connectors The physical interface locations of Access Point 3201 and 3241 are shown below. Copyright 2000-2011 Bluegiga Technologies Page 5 of 61 Figure : Physical interfaces of Bluegiga Access Point 1 In addition, Access Point 3241 has a hole in the bottom of the unit. Trough that hole user can press a button. If that button is pressed while the unit is powered on, configuration is reset to factory defaults. There is no power switch in Access Point 3201 or 3241. The adapter is the disconnection device; the socket-outlet shall be installed near the equipment and shall be easily accessible. Unplug and plug the power adapter to switch the power on and off. The power led in figure above is on when the power adapter is connected. All the blue status leds are turned off and the status led number 1 blinks on four second intervals when the boot procedure is finished and the unit is ready to be connected. Led number 2 is led which blinks quickly every 30 seconds indicating service activity. Bluetooth Bluetooth 2.1.2 Access Server AX4 connectors The physical interface locations of Access Server AX4 are described in figures below. Figure : Physical interfaces of Bluegiga Access Server AX4 2 There is no power switch in Access Server AX4. The adapter is the disconnection device; the socket-outlet shall be installed near the equipment and shall be easily accessible. Unplug and plug the power adapter to switch the power on and off. The power led in figure below is on when the power adapter is connected. Figure : Access Server AX4 leds 3 All the blue status leds are turned off and the status led number 1 blinks on four second intervals when the boot procedure is finished and the unit is ready to be connected. Bluetooth led, (led number 4) blinks quickly every 30 seconds indicating service activity. Bluetooth Access Server AX4 has microSD card slot, factory reset button and SIM card slot (for optional, integrated Copyright 2000-2011 Bluegiga Technologies Page 6 of 61 modem) under a cover in the bottom of the unit. See the picture below. Figure : Connectors below Access Server AX4 bottom cover 4 2.1.3 Access Server connectors The physical interface locations of Access Server 229x are described in figures below. Figure : Physical interfaces of Bluegiga Access Server 229x 5 There is no power switch in Access Server. The adapter is the disconnection device; the socket-outlet shall be installed near the equipment and shall be easily accessible. Unplug and plug the power adapter to switch the power on and off. The power led in figure above is on when the power adapter is connected. Copyright 2000-2011 Bluegiga Technologies Page 7 of 61 Figure : Leds and Compact Flash card slot of Access Server 229x 6 All the blue status leds are turned off and the rightmost blue led (closest to the power led) blinks on four second intervals when the boot procedure is finished and the unit is ready to be connected. Bluetooth led, (blue led furthest away from power led in Access Server) blinks quickly every 30 seconds indicating Bluetooth service activity. 2.2 Connecting to Access Device In order to manage your Bluegiga Access Device you need to be able to connect to it over the network. This can be done in two ways: either by having the Access Device directly connected to the PC via a crossover ethernet cable or by attaching the device to a switch in your local area network using a standard ethernet cable. In the latter case, before continuing please make sure that your Access Device is powered on and properly connected to your network. Notice that, by default all Access Devices are configured to acquire their IP configuration from a DHCP server which must be present in the LAN. On the other hand, when PC and Access Device are connected directly, both will use a random zeroconf address in the range 169.254.x.x/16 given the lack of DHCP server in the simple network, and provided that also the PC is configured for dynamic IP configuration. Anyway, also in this case the two devices will be in the same LAN and will be able to communicate together. Bluegiga Access Device can be managed either through a web browser or from the command line using SSH by advanced users. Both methods require you to know the IP address of your device, and this can be found by following the methods described below. 2.2.1 Using UPnP To use the Universal Plug'n'Play feature for connecting Bluegiga Access Device web interface you need to have Windows Vista or Windows 7 operating system. Go to

. Now you should be able to see Access Devices appearing under Start - Computer - Network Other devices group:

Copyright 2000-2011 Bluegiga Technologies Page 8 of 61 Figure : Windows 7 listing UPnP devices 7 Bluegiga Access Devices will have name "Access Point/Server Wserial number" where the serial number corresponds to the serial number in the sticker underneath the unit. To connect to Bluegiga Access Device web interface you can either double click the icon of the correct device or right click the icon and select View device webpage

. Figure : Connecting to web setup using UPnP 8 2.2.2 Using WrapFinder A second way to discover the IP address of your Bluegiga Access Device is to use the Bluegiga Wrapfinder 2.0 application. The scan and find all Bluegiga Access Devices that are present in your local network. application is available from the Bluegiga Wrapfinder Bluegiga Tech Forum

. It allows you to Once you have downloaded the Wrapfinder file from the Bluegiga Tech Forum you need to 1. 2. Extract the .zip file to desired location Launch Wrapfinder2.exe Copyright 2000-2011 Bluegiga Technologies Page 9 of 61 Figure : Wrapfinder 2.0 started listing Access Devices within local network 9 After you have started the Wrapfinder software you might be prompted by the firewall applications to allow the use of certain ports by Wrapfinder. There are cases in which it is wise to temporarily disable completely the software firewall running in the PC, if any. Once the Wrapfinder utility has started it automatically runs a search through the local network and lists all found Bluegiga Access Devices. You can refresh the search by clicking Find Devices

-button. Sometimes on slow networks two consecutive presses are needed. To access Bluegiga Access Device you can either double click it or select the one you want to connect to and click Open web interface

-button. Copyright 2000-2011 Bluegiga Technologies Page 10 of 61 2.3 Web interface When you have accessed the Bluegiga Access Device web interface using either of the methods described in previous chapter you should get main WWW page shown below:

If you see a login prompt instead of this page, you have already eHealth software bundle installed. See eHealth software user guide for more information. From the top-level page, click default password is buffy

Setup to log in to the configuration interface. The default username is root and the After logging in, you can configure several system and application settings:

Copyright 2000-2011 Bluegiga Technologies Page 11 of 61 For details of WWW interface components, see Default web interface and iWRAP Bluetooth user guide

. 2.4 Access Device software bundles Access Device application use cases may require additional software packages to be installed for full functionality. For key applications, these are also available in software bundles. A bundle is a single update packet which contains all software packages for certain application. You can order Access Devices with a bundle of your choice pre-installed. Currently available bundles are listed below:

Table : Software bundles for Access Devices 1 Bundle name Description Notes obexsenderbundle ObexSender Built in and installed by default if no other bundle was ordered. See separate ObexSender documentation. ehealthbundle eHealth software bundle Only available for Access Point 3201 and 3241 in SW version 4.3. See separate eHealth user guide. captiveportalbundle Captive Portal See Captive Portal documentation. oggplayerbundle bundle Ogg Player bundle Available for testing purposes. Bundles other than Access Device DVD in directory Software Components (wpkgd) for installation instructions. obexsenderbundle which comes inside system upgrade reflash packet are available on wpk or installable with command wpkgd install bundlename

. See Managing Copyright 2000-2011 Bluegiga Technologies Page 12 of 61 3 Connecting Access Device to network This chapter describes Access Device network interfaces and WiFi and modem configuration. For additional documentation, see separate "Networking Guide" document. 3.1 Network interfaces The network interfaces used in Access Devices are described in table below:

Table : Access Device network interfaces and their description 2 Interface Description nap nap:9 eth0 wlan0 wifi0 gn bnep#

ppp#

Dynamic virtual ethernet ("cable") device. This is the device having an IP address. All the programs should use this device instead of eth0. Alias interface of nap device for zero configuration networking. The real ethernet device, which is dynamically linked to the nap device. Do not use this device, use nap instead. Wi-Fi device. In the client mode (default), this device has its own IP address. In the access point mode, it is dynamically linked to the nap device (the default interface). Virtual control device for wlan0. Do not use this device. Virtual device for iWRAP Bluetooth PAN-GN connections. These devices are used for incoming and outgoing iWRAP devices are created, deleted and linked (to nap or gn) dynamically. Bluetooth PAN connections. These These devices are used for incoming and outgoing iWRAP modem Internet connection. In LAP use, these devices are created and deleted dynamically and traffic coming from them is masqueraded to the nap device. When modem is enabled, all traffic to ppp interfaces is also masqueraded. LAP connections or for a Bluetooth lo Local loopback interface. 3.2 Using 2G and 3G modems for Internet connectivity Access Server and Access Point can be connected to Internet over 2G/3G using USB modems from several vendors. Access Server 229x can also connect to Internet using a GSM/GPRS Compact Flash card or an external modem connected to its serial port. The supported devices are listed in Tested 3rd Party Peripherals document. Some Access Server AX4 models ship with integrated 2G or 3G modem. Software packages required to use modem to connect to Internet are installed by default. The operating system automatically identifies supported USB or Compact Flash modem devices and loads correct drivers when they are inserted. You can enable the modem and configure its settings, such as the modem device and connection script details, Setup - Network settings - Enable modem interface by using the application or its WWW interface at setup A reboot is needed for the new settings to take effect. From WWW Setup, you can do this at Setup - Advanced settings -

Reboot system (confirm)

. When modem connection to Internet is enabled, by default Access Device tries to establish Internet connection with modem only once when the device boots up. Copyright 2000-2011 Bluegiga Technologies Page 13 of 61 It is therefore recommended to enable option Setup - Network settings - Modem settings - Force connection open

. With this enabled, modem Internet connection is checked every 10 minutes with the fails, modem connection is restarted. ping command. If the check Some modems power up in mass storage mode. Supported modems will be switched to modem mode automatically. Switching from mass storage mode to modem mode might take so long that first attempt to make a connection fails and there are no further tries if before connection is properly established. option is turned off. Even if it is turned on, it can take up to 10 minutes Force connection open Force connection open By default, connection is working. You might want to specify a reliable host closer to your system in Setup - Network settings -

Modem settings - IP address used in force check generated by uses host 194.100.31.45 (bluegiga.com) for checking that the modem Internet command, otherwise the modem connection is reset every ten minutes. The test host must respond to ICMP ECHO_REQUEST packets ping If you also want to use the ethernet connection, you must remove it from the default interface (

network settings individually using the

(dynamic) state.

) bridge and configure its application while keeping the default interface network settings in their default setup nap 3.3 Using Wi-Fi AX4 is delivered with integrated Wi-Fi. All Access Devices support several USB Wi-Fi dongles. The supported devices are listed in Tested 3rd Party Peripherals document. Ad hoc mode is not supported. WPA/WPA2 passphrase length must be 8..63 characters. 3.3.1 Using Wi-Fi as Client (Managed) USB Wi-Fi client device support (including default. wpa-supplicant for WPA or WPA2 encryption support) is installed by Enable Wi-Fi interface using the Wi-Fi interface

. setup application or its WWW interface at Setup - Network settings - Enable When the correct kernel modules are installed and Wi-Fi interface enabled, Access Device notices when a supported Wi-Fi card is inserted and tries to use it in the client mode, without encryption. So, if there is an open Wi-Fi access point in range, you will automatically connect to it. To change Wi-Fi settings, use the settings Wpa-supplicant WPA/WPA2. Use the

. setup application or its WWW interface at Setup - Network settings - Wi-Fi is used to manage Wi-Fi connections. Supported encryption methods are WEP and Edit configuration file menu option to change network SSID and encryption method. Use following configurations to enable unencrypted, WEP or WPA/WPA2 encrypted connections:

no encryption network = {

# no encryption ssid="Bluegiga"

key_mgmt=NONE

Copyright 2000-2011 Bluegiga Technologies Page 14 of 61 WEP network = {

# WEP encryption ssid="Bluegiga"

key_mgmt=NONE wep_key0="ASCII WEP key"

#wep_key0=0123456789 wep_tx_keyidx=0

ASCII WEP key is given in quotes (e.g. "abcde" or "abcdeabcdeabc") hex digits are given without quotes (e.g. 0123456789 or 01234567890123456789012345) WPA/WPA2 network = {

# WPA/WPA2 encryption ssid="Bluegiga"

scan_ssid=1 key_mgmt=WPA-PSK psk="WPA shared key"

shared key length must be 8..63 characters A reboot is needed for the new settings to take effect. From WWW Setup, you can do this at Setup - Advanced settings -

Reboot system (confirm) The current software version does not support Wi-Fi bridging in the client (managed) mode, which means that traffic from Wi-Fi cannot be forwarded to wired ethernet. To debug Wi-Fi issues, you can collect and review Wi-Fi diagnostics information using WWW interface at Setup - Network settings - Wi-Fi settings - Collect Wi-Fi diagnostics setup

. application or its In addition, a standard set of command line wireless utilities is provided to fine-tune your Wi-Fi configuration:

iwconfig iwlist iwpriv For more information on these utilities, see: http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html 3.3.2 Using Wi-Fi as Access Point (Master) Please refer to mode. The required software packages are installed by default. Tested 3rd Party Peripherals document to see which USB Wi-Fi dongles support access point Enable Wi-Fi interface using the Wi-Fi interface

. setup application or its WWW interface at Setup - Network settings - Enable To change Wi-Fi settings, use the settings

. setup application or its WWW interface at Setup - Network settings - Wi-Fi To begin with, change the setting Wi-Fi access point mode. Act as a Wi-Fi Access Point to yes Hostapd

. is used by default to manage To change hostapd settings, use the setup application or its WWW interface at Setup - Network settings Wi-Fi Copyright 2000-2011 Bluegiga Technologies Page 15 of 61 settings - Basic configuration Basic configuration settings is used to change hostapd driver backend, SSID of your network, hardware mode, country code, Wi-Fi channel or maximum simultaneous client number. Default values should work with most of USB Wi-Fi dongles. Depending on used encryption, use Edit configuration file menu option and change the following lines:

No encryption Change nothing more. Typical WPA2 encryption (WPA2-CCMP (AES)) wpa=2 wpa_passphrase=verysecretpassphrase rsn_pairwise=CCMP Other encryptions:

WEP encryption wep_default_key=0 wep_key0="mysecretkey WPA-TKIP wpa=1 wpa_passphrase=verysecretpassphrase WPA2-TKIP wpa=2 wpa_passphrase=verysecretpassphrase WPA-TKIP and WPA2-TKIP wpa=3 wpa_passphrase=verysecretpassphrase WPA-CCMP (AES) wpa=1 wpa_passphrase=verysecretpassphrase wpa_pairwise=CCMP WPA2-CCMP (AES) wpa=2 wpa_passphrase=verysecretpassphrase rsn_pairwise=CCMP WPA-CCMP and WPA2-CCMP (AES) wpa=3 wpa_passphrase=verysecretpassphrase wpa_pairwise=CCMP rsn_pairwise=CCMP Copyright 2000-2011 Bluegiga Technologies Page 16 of 61 3.4 Shell prompt access Shell prompt access may be needed for advanced controlling operations that cannot be performed by using the WWW interface. You can get to the shell prompt by using SSH. When you are connected to the same LAN network with your Access Server or Access Point, you can find its IP address using uPnP or wrapfinder application (see Getting started with Bluegiga Access Device

). You can use SSH to get shell prompt access also using Bluetooth LAN Access or PAN profile. Access Devices can be seen in Bluetooth inquiries as "Wserialno_n", where "serialno" is the serial number of the device and "n"

is the number of the Bluetooth baseband in question (model 2293 and AX4 have three Bluetooth basebands, any of which can be connected). After you have connected to the server (no PIN code, username or password is needed), establish an SSH connection to the device at the other end of the connection. Again, you can use the find the IP address. wrapfinder application to Bluetooth LAN Access and PAN profiles are disabled by default. Use the WWW interface to enable them, if needed. The PAN profile can also be enabled by sending the http://update.bluegiga.com/as/4.3/misc/enable-pan.noarch.wpk by inserting a USB memory dongle with the file in its root directory to Access Device's USB port.

) to Access Device by using Bluetooth Object Push profile or enable-pan.noarch.wpk file (available on-line at 3.4.1 Management console (Access Server 229x only) If you do not have a Bluetooth LAN/PAN client and if Access Server is not connected to your LAN, or if you do not know the IP address given to Access Server, you can get the first shell prompt access by using the management console. The management console is only needed to change the network configuration settings if you cannot configure the network by using DHCP or Zeroconf. The management console is connected to Access Server with a serial cable. After you have configured the network settings by using the management console, all further controlling activities can be performed remotely using SSH sessions over ethernet or Bluetooth LAN/PAN connection. To setup the management console, proceed as follows:

1. 2. 3. Have a PC with a free COM port. Power off Access Server. Configure your terminal application, such as your computer's free COM port HyperTerminal in Windows, to use the settings below for Table : Management console serial port settings 3 Setting Speed Value 115200bps Data Bits 8 Parity None Stop Bits 1 Flow Control None 4. 5. 6. 7. 8. Connect the serial cable shipped with Access Server to your PC's free COM port. Connect the serial cable to the management (user) port in Access Server (see Figure 1-2). Power on Access Server. Enter letter The management console is now activated and you can see the boot log in your terminal window. in the terminal application during the first five seconds. b Copyright 2000-2011 Bluegiga Technologies Page 17 of 61 The boot process may stop at the following U-Boot prompt:

Hit any key to stop autoboot: 0 U-Boot>

If this happens, enter command boot to continue to boot Linux. 9. Wait for the device to boot up and end with the following prompt:

Please press Enter to activate this console. 10. Press Enter to activate the console. You will be logged in as root in directory

/root

[root@wrap root]

11. You can now control Access Server from the management console. 3.4.2 Transferring files to/from Access Device You can transfer files to and from Access Server and Access Point by using, for example:

ftpd Note:

FTP is disabled by default for security reasons. Use SFTP instead. SCP (secure copy over SSH). SFTP (secure FTP connection over SSH). FTP (plain FTP connection). FTP server is not installed by default. You can install it from software package Bluetooth OBEX (Object Push and File Transfer Profiles) to/from directory Access Point. NFS (mount an NFS share from a remote computer as a part of Access Server's or Access Point's file system). SSHFS (mount an Access Server or Access Point directory over SSH as a part of any other Linux host file system). To download and install SSHFS, visit CIFS (mount a Common Internet File System share from a remote computer as a part of Access Server's or Access Point's file system). A CIFS client, available in a separate software packet required. USB memory dongle. Xmodem/Ymodem/Zmodem (use install these commands from software package commands from the management console). You can

. http://fuse.sourceforge.net/sshfs.html rz/rx/rb/sz/sx/sb rzsz in Access Server or

/tmp/obex cifs-client

, is

. The management console is only available for Access Server 229x. Copyright 2000-2011 Bluegiga Technologies Page 18 of 61 4 Using services This chapter contains documentation of the default system services available in Access Devices. 4.1 Default services Access Device services are started automatically at system power-up or when another server daemon needs them. You can check which servers are currently installed and/or configured to start at system power-up with command applications Setup - Applications - Default startup or navigating in WWW Setup to chkconfig --list

. The servers and their purposes are described briefly below:

Server Description bluetooth Bluegiga iWRAP Bluetooth Server, which is described its own user guide. connector crond dhcpd finder httpd inetd Bluegiga Connector, which automatically opens and maintains connections to specified Bluetooth devices. This server is configurable using the application and its WWW interface. setup A daemon to execute scheduled commands. This server is configurable through the

/var/spool/cron/crontabs/root command in the same way as any Linux crond. file or the crontab This server is a DHCP daemon for providing automatic network configuration for clients in the network. Notice that, by default, this server is only enabled for the Bluetooth command applications Settings - Default interface settings file PAN Generic Networking profile. You can enable it for chkconfig dhcpd on

. You will then need to configure static network settings at and ensure you have matching DHCP server settings in interface, used by iWRAP interface by using Setup - Applications - Default startup or from WWW Setup at

/etc/udhpcd-nap.conf Setup - Network gn nap

. Bluegiga WRAP Finder Service. See Finder - Bluegiga Access Device Finder Web server. Another Web server, installed and used by lighttpd captiveportalbundle

, is available as a separate software component, also and ehealthbundle

. Internet services daemon. Notice that this server is disabled by default. Use the WWW interface of configuration file command to enable it. To configure chkconfig inetd on application or the

/etc/inetd.conf setup inetd

, edit its

. ntpd Network Time Protocol (NTP) daemon. obexsender Bluegiga ObexSender server. See separate documentation for detailed information. pppd serialport sshd syslogd telnetd Point to Point Protocol daemon. Modem network connections are established using iWRAP server uses it with Lan Access Profile. Bluetooth pppd

, and Bluetooth Serial Port Profile server. iWRAP Bluetooth user guide for more Bluegiga iWRAP information. SSH daemon. System logging daemon. This server can be configured by using the WWW interface. setup application or its Telnet protocol server. Notice that this server is disabled by default for security reason. Use the setup command to enable it. chkconfig telnetd on application or the udhcpcd DHCP client daemon for automatic network configuration. watchdog Bluegiga user level watchdog. wpkgd Bluegiga package management system daemon. zcip Zero configuration networking service. Copyright 2000-2011 Bluegiga Technologies Page 19 of 61 4.2 Managing software components (wpkgd) To maximize memory available for customer applications, Access Devices ship with minimal amount of software components installed. To see the installed software components and their version numbers, navigate to Setup - Advanced - System Information - List installed software components Available Software Packages separately. at the shell prompt. See for more information of software components installed by default and available or give command wpkgd list Software component package naming Software components are delivered in package files which are named in format

. For example:

name-[version].[architecture].wpk lt version number 20080910-1, for architecture. You can only install a software package of a specific architecture to hardware that supports the architecture. The architectures and the supporting hardware are listed in following table smsgw-20100420-1.lt.wpk software component, smsgw is Table : Supported hardware architectures and software package naming 4 Architecture Supporting Hardware noarch Any Access Device hp lt if df Access Server AX4 Access Point 3201 or Access Point 3241 Access Server 229x with serial number 0607240000 or higher Not supported since software version 4.0 0607239999 or lower (old non-RoHS Access Servers)

. Access Server 229x with serial number Installing software components There are number of ways to install software components:

1. 2. 3. 4. The easiest way to install a software component is to upload it from WWW Setup at Setup - Advanced settings - Upload a software update You can install software components by inserting a USB dongle with the WPK file containing the software installation packet in its root directory. You can install software components by transferring the WPK file to Device using SCP or

/tmp/obex If you can access the command prompt of your Access Device and your device has access to Internet, you can manage software components using network update operations described in the section below. Object Push. WPK files are automatically searched and installed from directory on Access

/tmp/obex Bluetooth

. The WPK files of additional software components provided by Bluegiga can be found in following locations:

http://update.bluegiga.com/as/4.3/hp for Access Server AX4 software http://update.bluegiga.com/as/4.3/lt for Access Point 3201 or 3241 http://update.bluegiga.com/as/4.3/if for Access Server 229x http://update.bluegiga.com/as/4.3/misc for software packages (utility WPK's) for all architectures wpk-directory in Bluegiga SDK DVD-ROM or ISO image After Bluegiga SDK is installed, in corresponding application and library directories under

/home/user/asdk/

-directory Copyright 2000-2011 Bluegiga Technologies Page 20 of 61 Uninstalling software components You can uninstall software components from the shell prompt. To list installed software components use command command without parameters for more information. To uninstall a component, use command wpkgd erase [component]

wpkgd list

. See the wpkgd Network update operations When Access Device is connected to the Internet, you can use the easily manage installed software components:

wpkgd command at the shell prompt to wpkgd install installs the newest available software component called software is retrieved from the Bluegiga software update repository. Example:

pkg pkg for your architecture. The

[root@wrap root]$ wpkgd install smsgw Downloading http://update.bluegiga.com/as/4.3/lt/smsgw-20100420-1.lt.wpk Package "smsgw" installed Currently the command may report that software is installed even if the installation has failed because of failing dependencies. It is therefore worth ensuring that the installation has been successful, by using command wpkgd search pkg wpkgd install pkg wpkgd erase pkg removes a software component called pkg

. Example:

[root@wrap root]$ wpkgd erase smsgw Purging smsgw (0100420-1)... wpkgd update updates all installed software components. wpkgd update pkg updates the software component called pkg

. wpkgd list lists installed and available software components and their version numbers. wpkgd list-updates lists updates available for installed software components. wpkgd search keyword searches for software component packages with name matching keyword

. wpkgd clean cleans network cache. 4.3 Bluetooth Access Devices ship by default with iWRAP Bluetooth software. It is documented in its own user guide. eHealth software bundle installs newer DBUS Bluetooth software, which is documented in eHealth user guide. 4.4 Web server The integrated web server in Access Device support HTTP/1.0 methods GET and POST, and has light user authentication capabilities. The content can be either static or dynamic - the WWW server is CGI/1.1 compatible. The web server is always running and the content (

directory in Access Device's file system. http://wrap-ip-address/

) is located in the

/var/www/html/

The web server is configured to protect the WWW Setup interface with a username and password. The default WWW Setup Security settings Setup password username and password can be changed in information about using the web server for your own applications, see the web examples in SDK. For further Copyright 2000-2011 Bluegiga Technologies Page 21 of 61 Note eHealth and Captive Portal bundles install more advanced software package also. lighttpd web server, which can be installed from its own 4.5 System time Access Device has Real Time Clock (RTC) which is backed up with a battery so it runs even when device is powered down. Access Device is also keeping the system time in sync with Internet time servers. 4.5.1 Real time clock (RTC) The system clock is read from the battery operated real time clock during boot. The system time is automatically written to the real time clock when the system is rebooted using the using the hwclock command. This can also be done for more information about the hwclock --systohc --utc utility. command. Give command hwclock --help reboot Tip Easiest way to set correct time is to use Update current time now by NTP setup application or its WWW interface by navigating to Setup Network settings

. It will also save the time to the battery operated real time clock. 4.5.2 Network time ntpd service uses the standard Network Time Protocol (NTP) to keep Access Device system time The automatically in sync using a random selection of eight public stratum 2 (NTP secondary) time servers. You can configure the NTP server to retrieve the correct time from a single time server by using the setup application or its WWW interface, at configured to answer NTP requests from other devices. Setup Network Settings Update current time now by NTP

. The service is also The NTP server configuration can also be altered by editing its configuration file

/etc/ntpd.conf

. Tip Access Device can provide RFC 868 time service with Applications Default startup applications inetd daemon. You need to enable inetd daemon at WWW Setup and enable the time service by editing its configuration file

/etc/inetd.conf

. 4.5.3 Time zones The default time zone in Access Server and Access Point is UTC. You can change it by installing correct tzdata*wpk or Bluegiga Software Development Kit DVD-ROM. eHealth software bundle contains improved WWW interface to select correct time zone. http://update.bluegiga.com/as/4.3/timezone/

management packet, available from 4.6 Using remote file shares 4.6.1 Using NFS mount mkdir -p /mnt/nfs First, create a mountpoint with command mount -o nolock <ipaddr-of-server>:/sharename /mnt/nfs

/mnt/nfs

. To use the NFS mount, issue a command such as

. After this, you can access the share in directory When the share is not needed, unmount it with command umount /mnt/nfs Copyright 2000-2011 Bluegiga Technologies Page 22 of 61 4.6.2 Using CIFS mount To use a CIFS mount (for example a shared folder in Windows), you need the installed in Access Device. cifs-client software component First, create a mountpoint with command

<ipaddr-of-server>/sharename /mnt/cifs -o user=username,nounix of the username you specified. After entering the correct password, you can access the share in directory

/mnt/cifs mount.cifs

. You will then be prompted for password

. Mount the directory by using command mkdir -p /mnt/cifs

. When the share is not needed, unmount it with command umount /mnt/cifs 4.6.3 Mounting at boot time rc.local System startup script can be used to automatically mount remote file shares at bootup. Add the mountpoint creation and actual mount commands in that script. If your CIFS share needs a password, it can be added to mount options, for example -o user=username,pass=password,nounix WWW Setup - Advanced Settings - System startup script which is editable in

. 4.7 Factory reset and complete system upgrade (reflash) Bluegiga Access Devices can be returned to default settings using three ways:

1. 2. 3. Configuration reset using factory reset button (Access Point 3241 and Access Server AX4 only), useful for example for restoring default network settings Complete system upgrade using "reflash" WPK package (over WWW interface, SSH or with USB memory dongle), recommended when you want to install latest software Kernel, filesystem and configuration restore with special "Factory Reset" USB memory dongle, useful if system has been corrupt and does not boot properly for methods above to work 4.7.1 Resetting default system configuration with factory reset button Access Point 3241 and Access Server AX4 can be resetted to its default configuration by keeping the button in the bottom of the device pressed while it is powered up. The device will then boot, reset system configuration settings and restore default configuration files and reboot itself. You can also run command from shell prompt to perform same reset (especially in Access Server 229x which does not have a button). configreset Factory reset with button press does not uninstall applications or recover deleted application files. To perform this, a factory reset with reprogramming is required, see below. 4.7.2 Complete system upgrade (reflash) The latest software updates and instructions are available at http://techforum.bluegiga.com Upgrading with a reflash package, which will erase all existing information, reset all passwords to their defaults and regenerate SSH keys. If you have your own applications running in the Access Device you plan to upgrade, stop and backup their data first. The easiest way to install the latest software version is to do it with a USB memory dongle:

1. 2. 3. 4. 5. for information of architectures) and copy the correct Find the correct software upgrade packet for your Access Device's architecture (see Managing Software Components (wpkgd) reflash-[version].[architecture].wpk Power down Access Device. Insert the dongle in Access Device. Power up Access Device. Wait with the dongle inserted for Access Device to boot and the blue leds to start blinking from side to file to an empty USB memory dongle. Copyright 2000-2011 Bluegiga Technologies Page 23 of 61 5. side. Do not power down Access Device while blue leds are blinking from side to side or if all of them are turned on. Installation takes 5-15 minutes (in AX4 less than 5), be patient. 6. 7. Check that only led labeled "1" in Access Point or AX4 (blue led closest to the power led in Access Server 229x) turns on and off every 4 seconds. You will then also see Bluetooth led, (led labeled "2" in Access Point, "4" in AX4 and blue led furthest away from power led in Access Server 229x) to blink quickly every 30 seconds indicating iWRAP Bluetooth service activity. You have now successfully upgraded Access Device. If you hear beeps (in case of Access Server) and all blue leds start blinking on and off at the same time, you have tried to upgrade with a wrong packet. You can confirm this from a log file in the root directory of your USB dongle. The log file is a file named using the software upgrade packet's filename and system timestamp. Please check again which file you should have used with help from Managing Software Components (wpkgd) reflash-[version].[architecture].wpk and try again. txt In some rare occasions the update process of an old Access Server may hang. If after 15 minutes all blue leds are still on, please power down Access Server, remove duplicate install protection file called reflash-[version].[architecture].wpk.dupe from USB dongle and restart the installation process. Instead of using a USB dongle, you can install software upgrade by uploading the packet with WWW Setup at Setup Advanced settings Upload a software update

. You can also install software upgrade by uploading it to directory

/tmp/obex using SSH (SCP). 4.7.3 Kernel, filesystem and configuration restore with "Factory Reset" memory dongle Access Device can be reprogrammed with the latest software version, erasing all data and recovering a system that does not boot up normally. The latest software updates and instructions are available at http://techforum.bluegiga.com/

. The easiest way to install the latest software version is to do it with a USB memory dongle:

1. 2. 3. 4. 5. 6.

*.tgz and root.*

kernel.*

available at

, or in directory dev/shm/phantom http://techforum.bluegiga.com/

files and unpack with for example packets (just rename the packets to files to an empty USB memory dongle. You can find these files inside inside or Copy factoryreset.zip reflash*.wpk Insert the dongle in Access Device. Power up Access Device. Wait with the dongle inserted as long as all blue leds are on. You will need to wait for 5 minutes when reprogramming Access Point and 10 minutes when reprogramming Access Server (less than 5 minutes when reprogramming Access Server AX4). Check that only led labeled "1" in Access Point or AX4 (blue led closest to the power led in Access Server) turns on and off every 4 seconds. You will then also see Bluetooth led, (led labeled "2" in Access Point, led labelled "4" in AX4 and blue led furthest away from power led in Access Server) to blink quickly every 30 seconds indicating Bluetooth service activity. You have now successfully reprogrammed Access Device. tar WinZip

) Copyright 2000-2011 Bluegiga Technologies Page 24 of 61 5 Using utilities Access Device ship with many standard Linux utilities pre-installed. Most of the utilities are part of commands. BusyBox

; see Enabled Busybox Applets for complete list of enabled BusyBox For a complete list of all installed and available utilities and software packages, see Available Software Packages

. 5.1 Wrapid - Bluegiga Access Device System Information You can get detailed information of Access Device hardware and software at Hardware information

. At shell prompt, running command wrapid outputs the same information. WWW setup Advanced settings If you need to use a hardware information detail for example in your own shell scripts, you can ask it directly with wrapid version number and so on). for list of queries it supports (hardware serial number, software command. Run it with parameter

--help 5.2 Changing the Bluetooth Range and EDR Performance The Bluetooth transmit power of Access Device is configurable. By default, class 1 settings for maximum range are used. With this setting, when maximum transmit power is being used, EDR packets are disabled. Next setting down is EDR, which limits transmit to the maximum that allows EDR packets, thus providing maximum EDR range. This setting can be configured with btclass EDR command. The settings can be changed further down to class 2 (10 meter range) settings with the btclass 2 command, or even lower with the 1 command. command. Default class 1 settings can be restored with the btclass 3 btclass You can also find these commands in Setup interface. Setup Advanced settings Bluetooth commands menu in the WWW btclass #

After properly. is given, it is recommended to reboot Access Device once to restart all Bluetooth services It is recommended to stop all applications using Bluetooth before issuing the btclass command. 5.3 Badctl - Bluegiga Access Device Control Badctl is used to read the reset button state and control internal devices like modem, Wi-Fi and external USB port. This tool switches power on/off and does power cycle for internal components. Currently supports AP 3241 (button, USB) and AX4 (button, modem, Wi-Fi, USB). badctl Copyright 2000-2011 Bluegiga Technologies Page 25 of 61

$ badctl --help usage: badctl DEVICE [COMMAND]

Manage Bluegiga Access Device and read state of button available devices:

modem internal GPRS/3G modem wifi internal Wi-Fi usb external USB port button state of button commands (all devices except button):

on switch power on off switch power off reset do power cycle exit status (commands):

0 executed successfully (OK) 1 problems during running command 2 unable to open device /dev/led exit status (state of button):

0 button is not pressed 1 button is pressed 5.4 Finder - Bluegiga Access Device Finder 5.4.1 Finder Service and Command The Finder service is a small service, which listens for UDP broadcast queries from Access Device Finder applications and responds to those queries with identification information (IP address, model, serial number, etc.). finder command can be used to query Finder service information from Access Devices in the network. With The no parameters, sends the query using the broadcast address of the default interface (nap). Broadcasting to networks of other interfaces can be done with --interface parameter, such as the zero configuration interface nap:9 in the following example:

finder

[root@wrap root]$ finder --interface nap:9 Access Point 3241 (S/N: 1012010002) (build: 4.3)

- Description: Access Point

- Hostname: wrap.localdomain

- IP: 10.1.1.111 (nap), 169.254.175.252 (nap:9), 192.168.161.1 (gn)

- Ethernet MAC: 00:07:80:01:3a:46

- iWRAP: 10101 00:07:80:99:91:ff bt2.0 (W1012010002_1) Access Server 2293 (S/N: 1611150016) (build: 4.0)

- Description: VFD #1611150016

- Hostname: wrap.localdomain

- IP: 169.254.202.147 (nap:9), 192.168.161.1 (gn), 10.1.1.65 (wlan0)

- Ethernet MAC: 00:07:80:81:65:76 With parameter --send finder will send info once to a specified host, for example to inform the host that the device has booted. Copyright 2000-2011 Bluegiga Technologies Page 26 of 61 5.4.2 Finder Protocol Finder protocol is used to find Access Servers or Access Points using a UDP broadcast message. Finder server is listening in port 9990 for broadcast and unicast messages. The reply is unicasted to sender. In Access Server and Access Point a finder message can be sent with command usage. The finder server is enabled by default. finder

. See finder --help for Finder Search Message Finder search message has four bytes:

0x62 0x66 0x62 0x66 Finder Reply Message Finder reply message has four header bytes:

0x66 0x62 0x66 0x62 Following the header bytes there is zero or more value tuples. Each tuple has format:

Field Name Length Description ID Length Data 1 byte 1 byte Tuple ID, see below Data length, in bytes Length bytes Value for ID Following tuple IDs are defined:

Tuple ID Description of Data 0x01, ProdId Product identification string, ASCII. 0x02, Revision Product revision string, ASCII. 0x03, HWSerial Hardware serial number, ASCII. 0x04, IP IP address of "nap" interface, 4 bytes. 0x05, EthMac Ethernet MAC address, 6 bytes. 0x06, iWRAP iWRAP information string, ASCII. 0x07, IPString List of all IP addresses, ASCII. 0x08, Hostname Hostname and domain, ASCII. 0x09, Description Free description, ASCII. 0x0a, BuildTag Software version, ASCII. 0x0b, ObexSender Reserved for ObexSender use, ASCII. 5.5 Smsgw - Bluegiga SMS Gateway Bluegiga SMS Gateway Server can be used for sending and receiving SMS messages with internal or external modems. Copyright 2000-2011 Bluegiga Technologies Page 27 of 61 Bluegiga SMS Gateway Server is not installed by default. It can be installed from software component smsgw

. When Bluegiga SMS Gateway Server is installed, it is also enabled to start at boot by default. You can disable it later (for example if you need to use the same modem for Internet connection) either with command chkconfig smsgw off applications smsgw same time. You cannot use the same modem for Internet connection and SMS gateway use at the Setup Applications Default startup application's WWW interface at or using the setup By default, Bluegiga SMS Gateway Server assumes the modem can be accessed using The device can be changed by using the Setup Applications SMS gateway settings Modem device setup application or its WWW interface, by changing the setting at

/dev/ttyUSB0 device. Another mandatory setting is the SMSC (Short Message Service Center) number. Remember to change it to match your mobile operator. A reboot is needed for the new settings to take effect. From WWW Setup, you can do this at Reboot system (confirm) Setup Advanced settings The PIN code query of the SIM card at power-up must be disabled. Bluegiga SMS Gateway Server requires exclusive access to the modem device. Otherwise it will fail to start and the "can't lock device devicename" error message is printed to the system log. Especially, if you are using Bluetooth Serial Port Profile, ensure it is configured to use another serial port device or disabled completely. By default, Bluegiga SMS Gateway Server uses directory message received is stored in a separate file). It scans messages to be sent from directory settings can be changed by editing the configuration file at configuration file

(search for dirin and dirout entries). These Setup Applications SMS gateway settings Edit for storing incoming messages (each

/tmp/sms/out

/tmp/sms/in Bluegiga SMS Gateway Server exits in case of error. As it has registered itself to Bluegiga User Level Watchdog, this will make device to reboot. This is a feature to recover from problems in modem communication, but as a side effect it can cause a reboot loop if there is a mistake in the configuration file. Be careful when editing it. To send a SMS message, create a text file with extension GSM number of the recipient. Next lines contain the message. After you have created the file, copy or move it to the outgoing directory (

by default) and the message will be sent automatically. The first line of that file must contain only the

/tmp/sms/out

.sms An example message:

+17815550199 Hello, world!

Once the message is sent, the file is deleted from the outgoing directory. For further information on using smsgw

, see the makesms example in SDK. 5.6 Watchdog - Bluegiga User Level Watchdog Bluegiga User Level Watchdog daemon listens on UDP port 4266 for "id timeout" messages. "id" is an ASCII string, without spaces. If "timeout" equals to 0 (zero), the "id" is removed from the list of processes to wait. If

"timeout" is greater than 0 (zero), the "id" is added or updated. When there is no message for "id" received within the "timeout" seconds, the user level watchdog dies and the kernel watchdog reboots Access Device. The watchdog command can be used to send messages to the watchdog daemon. This is done through Copyright 2000-2011 Bluegiga Technologies Page 28 of 61 command watchdog id timeout

. For example, watchdog test 5

. Copyright 2000-2011 Bluegiga Technologies Page 29 of 61 6 Using 3rd Party Peripherals 6.1 Using USB, Compact Flash or microSD Memories Access Device's persistent memory storage can be extended by using a USB storage device like a memory dongle or a portable hard drive or a Compact Flash memory card. These are also used by the each time this kind of device is inserted, it is automatically mounted and scanned for management packets, which are processed and unmounted. wpkgd daemon -

Access Server AX4 supports also microSD card. If one is inserted, it is automatically mounted at boot and is accessible in /mnt/sdcard To use the USB storage device or Compact Flash memory card for your own applications, the memory must be mounted manually by using command:

[root@wrap /]$ mount -t vfat device directory The device parameter is a path to the USB dongle or Compact Flash memory card filesystem device. For the first memory device inserted after a reboot, it is

/dev/sda names are created:

remove the first memory device before inserting the second one, new device file names are not created. if the device is partitioned (which often is the case), or if the device has no partition table. If you insert more memory devices at the same time, new device file for the third one, and so on. If you unmount and for the second one,

/dev/sda1

/dev/sdb1

/dev/sdc1 Always remember to unmount the memory dongle or memory card with command:

[root@wrap /]$ umount directory If you have inserted both a USB memory dongle and a Compact Flash memory card before powering up Access Server, Compact Flash card is found first (typically getting device file name

/dev/sdb1

) and the USB memory device is found next (

/dev/sda1

). The filesystem in USB dongle can get corrupted if you have a power failure while you are writing data to it. A utility called again:

can fix the problem. Therefore, if mount fails, you should run and try mounting fsck.vfat fsck.vfat

[root@wrap /]$ fsck.vfat -a device There is not enough memory to run fsck.vfat on storage devices bigger than 8GB. Copyright 2000-2011 Bluegiga Technologies Page 30 of 61 If your application uses USB storage devices or Compact Flash memory cards for additional storage, you must ensure that these services do not start before these storage devices are properly mounted. You should therefore disable the automatic startup of application(s) in question either by changing their startup state to off in WWW Setup at Default startup applications

/etc/rc.d/rc.local following example for WWW Setup Advanced settings System startup script Setup Applications

. The system startup script or at shell prompt with command chkconfig application off should then be edited (

) according to the obexsender

#!/bin/sh

# This script will be executed *after* all the other init scripts.

# You can put your own initialization stuff in here

# want to the full Sys V style init stuff. you don't if do

[ $? != 0 ]; then mkdir -p /mnt/disk mount -t vfat /dev/sda1 /mnt/disk if

# run fsck.vfat only again fsck.vfat -a /dev/sda1 mount -t vfat /dev/sda1 /mnt/disk fi if mounting failed, then try to mount

# Script assumes you have disabled obexsender automatic startup as instructed,

# so it is started now.

# Sleep is just to make sure filesystem is calm after mounting. sleep 20 service obexsender start 6.2 Using USB sound cards Access Devices features can be extended by adding external USB sound card. All devices providing generic USB audio device class are supported. Please refer tested. Software currently supports only output. Tested 3rd Party Peripherals to see what devices we have USB sound card drivers are not installed by default. Those can be installed using software component kernel-modules-sound ogg123 includes needed drivers, libraries and commands. to play Ogg files, easiest way is to install

. If you like to have oggplayerbundle that To use the USB sound card with Open Sound System (OSS) use command (

ogg123 uses OSS):

[root@wrap /]$ modprobe snd-pcm-oss If you compile your own application using Advanced Linux Sound Architecture (ALSA), there is no need to load OSS emulation layer module. Using ogg123 is simple:

[root@wrap /]$ ogg123 file.ogg Decoding high quality Ogg files real time is not possible in Access Devices. Copyright 2000-2011 Bluegiga Technologies Page 31 of 61 6.3 Using USB webcams Access Devices features can be extended by adding external USB webcam. All devices providing generic USB video class devices are supported. Please refer tested. to see what devices we have Tested 3rd Party Peripherals USB webcam drivers are not installed by default. Those can be installed using software component kernel-modules-media

. To use the USB webcam we provide one software:

can be installed using single command:

mjpg-streamer

. That software, needed libraries and drivers

[root@wrap /]$ wpkgd install kernel-modules-media libjpeg libv4l2 mjpg-streamer Using mjpg-streamer is simple:

[root@wrap /]$ mjpg_streamer -o "output_http.so"

To view output, point your browser to http://<ip-address-of-access-device>:8080/?action=snapshot to view a single snapshot. For simple stream you need a MJPEG compatible browser e.g. Firefox. In that case use URL http://<ip-address-of-access-device>:8080/?action=stream. Copyright 2000-2011 Bluegiga Technologies Page 32 of 61 7 Licenses, Warranty, Certification Information and WEEE Compliance Bluegiga Technologies is hereby willing to license the enclosed WRAP product and its documentation under the condition that the terms and conditions described in the License Agreement are understood and accepted. The License Agreement is supplied within every WRAP product in hard copy. It is also available on-line at http://www.bluegiga.com/terms_and_conditions

. The use of the WRAP product will indicate your assent to the terms. If you do not agree to these terms, Bluegiga Technologies will not license the software and documentation to you, in which event you should return this complete package with all original materials, equipment, and media. Some software components are licensed under the terms and conditions of an open source license. Details can be found from or in directory /doc/license/ in SW CD-ROM or SDK DVD-ROM. http://gpl.bluegiga.com/

The Bluegiga WRAP Product Limited Warranty Statement is available on-line at http://www.bluegiga.com/terms_and_conditions

. 7.1 Access Point Certification Information and WEEE Compliance Access Point is CE approved and qualified v. 2.0 + EDR. It has been measured against the following specification standards: ETSI EN 300 328 v1.6.1 / EN 301 489-1/17 / EN 60950-1 / FCC parts 15.247, 15.209, 15.207, 15.109 and 15.107. Supported FTP client and server, ObjP client and server, PAN-PANU, PAN-GN and PAN-NAP. profiles are: GAP, SDAP, LAN client and server, SPP A and B, Bluetooth Bluetooth Hereby, Bluegiga Technologies declares that this Access Point is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This device complies with Part 15 of the FCC Rules. The device operation is subject to the following two conditions:

This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the distance between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio or television technician for help FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Notice for Canada This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Copyright 2000-2011 Bluegiga Technologies Page 33 of 61 Cet appareil numrique de classe B est conforme aux normes canadiennes NMB-003 et CNR-210. This device complies with Industry Canada licence-exempt RSS standard. Operation is subject to the following two conditions:

This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesirable operation. Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence. Son Fonctionnement est soumis aux deux conditions suivantes :

Le matriel ne peut tre source Dinterfrences et Doit accepter toutes les interfrences reques, Y compris celles pouvant provoquer un fonctionnement indsirable. RF exposure Low power license-exempt radiocommunication devices (RSS-210) Operation is subject to the following two conditions:

This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. The transmitter devices have been designed to operate with the antennas integrated in the computer, and having a maximum gain of within 3 dBi. Appareils de radio-communication basse tension sans licence d'utilisation (CNR-210) Le fonctionnement de ce type d'appareil est soumis aux deux conditions suivantes :

Cet appareil ne doit pas perturber les communications radio. Cet appareil doit supporter toute perturbation, y compris les perturbations qui pourraient provoquer son dysfonctionnement. Les appareils metteurs ont t conus pour fonctionner avec les antennes intgres l'ordinateur et avoir un gain d'antenne maximal de 3 dBi. Exposure of humans to RF fields (RSS-102) The computers employ low gain integral antennas that do not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site at http://www.hc-sc.gc.ca/

The radiated energy from the antennas connected to the wireless adapters conforms to the IC limit of the RF exposure requirement regarding IC RSS-102, Copyright 2000-2011 Bluegiga Technologies Page 34 of 61 Issue 4 clause 4.1. Conformit des appareils de radiocommunication aux limites d'exposition humaine aux radiofrquences (CNR-102) L'ordinateur utilise des antennes intgrales faible gain qui n'mettent pas un champ lectromagntique suprieur aux normes imposes par Sant Canada pour la population. Consultez le Code de scurit 6 sur le site Internet de Sant Canada l'adresse suivante : http://www.hc-sc.gc.ca/

L'nergie mise par les antennes relies aux cartes sans fil respecte la limite d'exposition aux radiofrquences telle que dfinie par Industrie Canada dans la clause 4.1 du document CNR-102, version 4. Changes or modifications made to this equipment not expressly approved by Bluegiga Technologies Inc. may void the FCC authorization to operate this equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 7.1.1 WEEE Compliance The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. Do not dispose of these products as unsorted municipal waste. 7.2 Access Server Certification Information and WEEE Compliance Access Server is CE approved and specification standards: ETSI EN 300 328 v1.6.1 / EN 301 489-1/17 / EN 60950-1 / FCC parts 15.247, 15.209, 15.207, 15.109 and 15.107. Supported FTP client and server, ObjP client and server, PAN-PANU, PAN-GN and PAN-NAP. qualified v. 2.0 + EDR. It has been measured against the following profiles are: GAP, SDAP, LAN client and server, SPP A and B, Bluetooth Bluetooth Hereby, Bluegiga Technologies declares that this Access Point is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This device complies with Part 15 of the FCC Rules. The device operation is subject to the following two conditions:

Copyright 2000-2011 Bluegiga Technologies Page 35 of 61 This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the distance between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio or television technician for help Changes or modifications made to this equipment not expressly approved by Bluegiga Technologies Inc. may void the FCC authorization to operate this equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Any transmitter installed in the CF card slot must not exceed 4 W of e.i.r.p. To check if a particular equipment complies with this restriction, you need to know its FCC ID number and visit the searching engine in the FCC web site in the following Internet address, where you can find the output power by the equipment in the grant of equipment: https://gullfoss2.fcc.gov/prod/oet/cf/eas/reports/GenericSearch.cfm If this link does not work properly, please visit the FCC website (

steps to find the searching engine:

http://www.fcc.gov/

) and follow the following FCC website Office of Engineering Technology Equipment Authorization Electronic Filing Generic Search Please notice that the output power listed in the grant uses different units depending on the type of the equipment, e.g.:

The output power for 802.11a/b/g/h equipment or similar equipment approved under 15.247 or 15.407 is listed as Conducted RF power. 15.247 or 15.407 limit the e.i.r.p. to 4 W, so this restriction is fulfilled. The output power for Part 22 cellular equipment is listed as e.r.p. The relationship between e.r.p. and e.i.r.p. is the following one:

e.i.r.p. = 1.64 x e.r.p. The output power for Part 24 PCS equipment is listed as e.i.r.p. For other type of equipment, please consult the distributor in order to assure the restriction is fulfilled. Defininitions:

Effective Radiated Power (e.r.p.) (in a given direction): The product of the power supplied to the antenna and its gain relative to half-wave dipole in a given direction. Equivalent Isotropically Radiated Power (e.i.r.p.) (in a given direction): The product of the power supplied to the antenna and its gain relative to an isotropic antenna. The table below is excerpted from Table 1B of 47 CFR 1.1310 titled Limits for Maximum Permissible Exposure

(MPE), Limits for General Population/Uncontrolled Exposure:

Frequency Range (MHz) Power Density (mW/cm) 300 - 1500 1500 - 100000 f/1500 1.0 Copyright 2000-2011 Bluegiga Technologies Page 36 of 61 The equipment WRAP Access Server equipment transmits in the 2400 - 2483.5 MHz frequency range, so the applicable MPE limit is 1 mW/cm. The equipment can be provided with up to 4 Bluetooth modules WT11# (FCC ID: QOQWT11):

Under the conditions stated above MPE limits can be guaranteed as the calculation below shows:

Example 1. 15.247 or 15.407 Compact Flash Card with maximum allowed e.i.r.p. of 4 W Using Equation from page 18 of OET Bulletin 65, Edition 97-01:

S S Compact Flash card

= Prad (e.i.r.p.) Compact Flash card

/ 4R = 4000 mW/4(20 cm) Compact Flash card

= 0.795774 mW/cm S Total

= S Bluetooth

+ S Compact Flash card

= 0.003481 mW/cm + 0.795774 mW/cm S Total

= 0.799255 mW/cm < 1 mW/cm Example 2. Part 22 Compact Flash Card with maximum e.r.p. of 1.5 W (Category excluded of MPE evaluation according to 2.1091) Using Equation from page 18 of OET Bulletin 65, Edition 97-01 and considering that e.i.r.p. = 1.64 x e.r.p.:

S S Compact Flash card

= Prad (e.i.r.p.) Compact Flash card

/4R = 1500 x 1.64 mW/4(20 cm) Compact Flash card

= 0.489401 mW/cm S Total

= S Bluetooth

+ S Compact Flash card

= 0.003481 mW/cm + 0.489401 mW/cm S Total

= 0.492882 mW/cm < 1 mW/cm Example 3. Part 24 Compact Flash Card with maximum e.r.p. of 3 W (Category excluded of MPE evaluation according to 2.1091) Using Equation from page 18 of OET Bulletin 65, Edition 97-01 and considering that e.i.r.p. = 1.64 x e.r.p.:

S S Compact Flash card

= Prad (e.i.r.p.) Compact Flash card

/4R = 3000 x 1.64 mW / 4(20cm) Compact Flash card

= 0.978803 mW/cm S Total

= S Bluetooth

+ S Compact Flash card

= 0.003481 mW/cm + 0.978803 mW/cm S Total

= 0.982284 mW/cm < 1 mW/cm 7.2.1 WEEE Compliance The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. Do not dispose of these products as unsorted municipal waste. Copyright 2000-2011 Bluegiga Technologies Page 37 of 61 Copyright 2000-2011 Bluegiga Technologies Page 38 of 61 Copyright 2000-2011 Bluegiga Technologies Page 39 of 61 8 Appendices 8.1 Access Device directory tree Access Device Directory Tree Type Note

/ f whole filesystem is root writable

|-- bin f

|-- dev r

| `-- shm r ramdisk

| |-- etc r resolv.conf

| |-- tmp r /tmp

| | |-- obex r obexserver dir

| `-- var r ramdisk part of /var

| |-- lock r

| | `-- subsys r

| |-- log r

| |-- run r

| `-- empty r

|-- etc f system config and init scripts

| |-- backup f configreset files configuration files

| |-- configreset f configreset scripts

| | |-- post.d f

| | `-- pre.d f

| |-- init.d -> rc.d/init.d l

| |-- ppp f

| | `-- peers f

| |-- rc.d f

| | |-- init.d f

| | `-- rc3.d f

| |-- rc3.d -> rc.d/rc3.d l

| |-- rc.d f

| | |-- init.d f

| | |-- rc0.d f

| | |-- rc1.d f

| | `-- rc3.d f

| |-- rc0.d -> rc.d/rc0.d l

| |-- rc1.d -> rc.d/rc1.d l

| |-- rc3.d -> rc.d/rc3.d l

| |-- ssh f

| `-- sysconfig f

|-- home f

|-- lib f system libraries

| |-- firmware f

| | |-- kaweth f

| | `-- zd1211 f

| |-- modules f

| | `-- [module directories] f

| |-- pppd f

| `-- xtables f

|-- mnt f mount points

| |-- disk f

| `-- usb f

|-- proc p proc filesystem

|-- root f home directory of root

|-- sbin f Copyright 2000-2011 Bluegiga Technologies Page 40 of 61

|-- sys p sys filesystem

|-- tmp -> dev/shm/tmp l temporary data (ramdisk)

{code}

{code:none}

|-- usr f

| |-- bin f

| |-- lib f

| | `-- gconv f

| |-- libexec f

| |-- local f mount point for second flash

| |-- sbin f

| `-- share f

| |-- tabset f

| |-- terminfo f

| | |-- a f

| | |-- l f

| | |-- s f

| | |-- v f

| | `-- x f

| `-- usb-modeswitch f

`-- var f

|-- empty -> ../dev/shm/var/empty f

|-- lib f

| |-- btclass f

| |-- dpkg f

| | `-- info f

| |-- obexsender f

| `-- setup f

|-- lock -> ../dev/shm/var/lock l

|-- log -> ../dev/shm/var/log l log files

|-- run -> ../dev/shm/var/run l

|-- spool f

| `-- cron f

| `-- crontabs f

|-- tmp -> ../dev/shm/var/tmp l

`-- www f

|-- cgi-bin f

`-- html f WWW pages Types

f = FLASH filesystem, read/write, files will be saved on power-down r = RAM filesystem, read/write, files will be lost on power-down l = symbolic link p = proc/sys filesystem, can be used to configure Linux 8.2 Tested 3rd Party Peripherals USB peripherals tested with Access Devices Working modems All USB modems need after USB modem has switched to modem-mode. Values reported by USB modem before switching to modem-mode are reported in brackets under usb-modeswitch column.

(installed by default) to work. VID:PID column reports values kernel-modules-modem Copyright 2000-2011 Bluegiga Technologies Page 41 of 61 Name Type Port VID:PID Usb-modeswitch needed Notes Pluggable without extension cable A-Link 3GU 3G

/dev/ttyUSB2 AS=no, AP=no, AX4=yes 1e0e:9200 yes (1e0e:f000) GPRS-MODEM Falcom SAMBA 75 GPRS /dev/ttyUSB0 AS=no, AP=no, AX4=yes GPRS /dev/ttyACM0 AS=no, AP=no, AX4=yes 067b:0609 no 0681:0034 no FCC ID: QIXSAMBA75, use ATD*99***1#

Global Wireless WM66-TF 3G

/dev/ttyUSB0 AS=no, AP=yes, AX4=yes 05c6:0015 yes (05c6:2000) micro-SD reader does not work, do not use or AS/AP might not boot up Huawei E160E 3G

/dev/ttyUSB0 AS=no, AP=yes, AX4=yes 12d1:1003 no FCC ID: QISE160E, micro-SDHC reader works, connector for external antenna Huawei EG162G 3G Huawei E1552 3G Huawei E169 3G Huawei E1690 3G Huawei E1750 3G Huawei E1820 3G Huawei E180 3G Huawei E220 3G

/dev/ttyUSB0 AS=yes, AP=yes, AX4=yes

/dev/ttyUSB0 AS=no, AP=yes, AX4=yes

/dev/ttyUSB0 AS=yes, AP=yes, AX4=yes

/dev/ttyUSB0 AS=no, AP=yes, AX4=yes

/dev/ttyUSB0 AS=no, AP=yes, AX4=yes

/dev/ttyUSB0 AS=no, AP=yes, AX4=yes

/dev/ttyUSB0 AS=no, AP=yes, AX4=yes

/dev/ttyUSB0 AS=no, AP=no, AX4=no 12d1:1001 no tested by customer 12d1:1001 yes (12d1:1446) micro-SDHC reader works 12d1:1001 no FCC ID: QISE169, micro-SD reader not supported, connector for external antenna 12d1:1001 yes (12d1:1446) tested by customer 12d1:1003 yes (12d1:1446) micro-SDHC reader works, tested by customer 12d1:1001 yes (12d1:14ac) tested by customer 12d1:1003 no micro-SDHC reader works, tested by customer 12d1:1003 no FCC ID: QISE220 Mobidata GPRS GPRS /dev/ttyUSB0 AS=no, AP=no, AX4=yes 10c5:ea61 no Copyright 2000-2011 Bluegiga Technologies Page 42 of 61 MTX-H25 3G

/dev/ttyACM0 AS=no, AP=no, AX4=no 0681:0047 no PID depends on configuration, mode must be programmed before using in AS/AP

(at^susb="Startup","Mdm"), easiest to do with PC Newolution Webbox GPRS /dev/ttyUSB0 AS=no, AP=no, AX4=no 0403:6001 no Nokia CS-15 3G 3G 3G Sierra Wireless Compass 885 SIMCom SIM5218 Telewell GPRS

/dev/ttyACM0 AS=no, AP=yes, AX4=yes

/dev/ttyUSB3 AS=no, AP=yes, AX4=yes

/dev/ttyUSB2 AS=no, AP=no, AX4=no 0421:0611 yes (0421:0610) FCC ID: PYARD-10, Nokia CS-10 might work also 1199:6880 no 05c6:9000 no FCC ID: N7NC885, micro-SDHC reader works Module in evaluation kit tested. GPRS /dev/ttyACM0 AS=no, AP=yes, AX4=yes 22b8:3802 no Telit UC864-G 3G

/dev/ttyUSB0 AS=no, AP=no, AX4=no 1bc7:1004 no Module in evaluation kit tested. Some versions of AX4 includes this. Teltonika ModemUSB/G10 GPRS /dev/ttyUSB0 AS=no, AP=no, AX4=yes 0403:6001 no Teltonika ModemUSB/H7.2, U3G15L 3G

/dev/ttyHS3 0af0:6911 no AS=no, AP=no, AX4=yes ZTE K3565-Z 3G ZTE K3805-Z 3G ZTE MF100 3G ZTE MF636+

3G

/dev/ttyUSB2 AS=no, AP=yes, AX4=yes

/dev/ttyACM1 AS=no, AP=yes, AX4=yes

/dev/ttyUSB2 AS=no, AP=yes, AX4=yes

/dev/ttyUSB2 AS=no, AP=yes, AX4=yes 19d2:0052 yes (19d2:2000) micro-SDHC reader works, tested by customer 19d2:0052 yes (19d2:1001) tested by customer 19d2:0017 yes (19d2:2000) eject -s /dev/sg0 use get micro-SDHC reader to work to 19d2:0031 yes (19d2:2000) micro-SDHC reader works, connector for external antenna Copyright 2000-2011 Bluegiga Technologies Page 43 of 61 Non-working modems Name Type VID:PID Notes Huawei E160X / Vodafone K3565 3G 12d1:1003 Should work but we tested SIM locked device. NetComm USB56 Rave!

POTS 0483:7554 NTTDocomo Foma L02A NTTDocomo Foma L05A Option Icon 225 Sony-Ericsson WD400 3G 3G 3G 3G Working Wi-Fi dongles 1004:610c Contact Bluegiga to get this modem to work. 1004:613a Contact Bluegiga to get this modem to work. 0af0:6971 does not support ppp 0fce:d0e1 tested with 4.0 software, might work with current one All USB Wi-Fi sticks support client (station) mode with WEP, WPA or WPA2 encryption. Also unencrypted mode is supported. Package is needed for USB sticks (installed by default). Some sticks (see table kernel-modules-wifi below under "Notes" column) need special kernel-modules-wifi-experimental occasionally present unstable behavior. package which however might Name Speed AP mode support A-LINK WL54USB b/g no A-LINK WL54USB-A b/g no A-Link WNU-A b/g/n no Asus WL168G V2 b/g yes Belkin F5D7050 b/g yes D-Link DWA-140, H/W ver. B1 b/g/n yes D-Link DWL-G122, H/W ver. C1 Edimax EW-7318Ug b/g yes b/g yes Edimax EW-7718UN b/g/n yes Pluggable without extension cable AS=no, AP=yes, AX4=yes AS=no, AP=yes, AX4=yes AS=no, AP=no, AX4=yes AS=yes, AP=yes, AX4=yes AS=no, AP=yes, AX4=yes AS=no, AP=yes, AX4=yes AS=no, AP=yes, AX4=yes AS=no, AP=yes, AX4=yes AS=no, AP=yes, AX4=yes VID:PID Chipset Notes 0ace:1215 zd1211rw internal antenna 0ace:1215 zd1211rw external antenna 0cf3:9170 ar9170 older version with two external antennas tested 0b05:1723 rt2571 FCC ID MSQWL167G 050d:705a rt2571 FCC ID K7S-F5D7050B 07d1:3c09 rt2870 needs kernel-modules-wifi-experimental 07d1:3c03 rt2571 FCC ID KA2WLG122C1 148f:2573 rt2571 148f:2870 rt2870 needs kernel-modules-wifi-experimental Copyright 2000-2011 Bluegiga Technologies Page 44 of 61 Edimax EW-7718UN b/g/n yes Linksys WUSB54GC-EU ver. 1 Linksys WUSB54GC-EU ver. 3 Linksys WUSB200 b/g yes b/g yes b/g yes Netwjork W311U b/g/n yes Netwjork W541U b/g yes SignalKing SK-RT2571-X3 b/g yes Sunshine WLAN HWUG1 b/g yes Telewell TW-WLAN 802.11n/g/b USB v2 TP-LINK TL-WN422G b/g/n yes b/g no Winxin WM802RTG b/g yes Zyxel G-202 b/g no AS=no, AP=yes, AX4=yes AS=no, AP=yes, AX4=yes AS=yes, AP=yes, AX4=yes AS=no, AP=no, AX4=no AS=yes, AP=yes, AX4=yes AS=no, AP=yes, AX4=yes AS=no, AP=yes, AX4=yes AS=no, AP=yes, AX4=yes AS=yes, AP=yes, AX4=yes AS=no, AP=yes, AX4=yes AS=no, AP=yes, AX4=yes AS=no, AP=yes, AX4=yes 7392:7711 rt2870 13b1:0020 rt2571 1737:0077 rt2070 needs kernel-modules-wifi-experimental

, tested by customer FCC ID Q87-WUSB54GC, first version (silver) FCC ID Q87-WUSB54GCV3, third version (black), needs kernel-modules-wifi-experimental 13b1:0028 rt2571 FCC ID Q87-WUSB200 148f:3070 rt3070 needs kernel-modules-wifi-experimental 148f:2573 rt2571 148f:2573 rt2571 148f:2573 rt2571 FFC ID NDD957318S607, external antenna 148f:3070 rt3070 needs kernel-modules-wifi-experimental 0cf3:1006 ath9k 18e8:6238 rt2571 external antenna, OEM module tested 0586:3410 ar2524 Copyright 2000-2011 Bluegiga Technologies Page 45 of 61 Non-working Wi-Fi dongles Name A-Link WNU VID:PID Chipset Notes 0bda:8192 rtl8192 Belkin F5D7050 v5000 050d:705e rtl8187b FCC ID: K7SF5D7050E Buffalo WLI-USB-KB11 0411:0044 prism FCC ID: NKRUSB400 D-Link DWA-131 07d1:3303 rtl8192 HW ver. A1, FW ver. 1.20 tested EDUP 54M 0457:0163 sis163u Netgear WG111T 1385:4251 ar5523 FCC ID: PY3WG111T Skycity SY-W8509 0bda:8176 rtl8192cu TP-LINK TL-WN620G ver 1.2 0cf3:0002 ar5523 WLAN 54Mbps 0416:0035 winbond Working storage devices All USB memory sticks, card readers and hard disks belonging to mass storage device class devices should work. USB CD/DVD drives are not working. Working serial adapters Most USB serial adapters should work without installation of any package. Below is list of adapters that we have tested. Name Port(s) VID:PID Notes RS232-USB

/dev/ttyUSB0 067b:2303 Many different kind of "generic" adapters tested. RS232-USB

/dev/ttyUSB0 /dev/ttyUSB1 0403:6001 Sandberg 133-08B /dev/ttyUSB0 UC-232A

/dev/ttyUSB0 067b:2303 0557:2008 Working NFC readers Installation of package kernel-modules-nfc is needed. Name Standard VID:PID Notes Sony RC-S330 Felica 054c:02e1 Sony RC-S370 Felica 054c:02e1 Working sound cards All USB sound cards need class devices should work also but we have listed only ones we have tested. kernel-modules-sound

(not installed by default) to work. Other USB audio device Name VID:PID Notes 3D Sound SJ-588 1130:f211

"No name black box" 0d8c:0102 6ch + SPDIF in/out + microphone in Copyright 2000-2011 Bluegiga Technologies Page 46 of 61 Working webcams All USB video class devices needs class devices should work also but we have listed only ones we have tested. kernel-modules-media

(not installed by default) to work. Other USB video Name VID:PID Notes AVEO Technology USB Camera 1871:01f0 Logitech Quickcam Ultra Vision 046d:08c9 Non-working webcams Name VID:PID Notes Logitech QuickCam Web 046d:0850 Working ethernet adapters All listed USB ethernet adapters have build-in support and appear as second ethernet device (eth1). Name Speed Pluggable without extension cable VID:PID Notes A-Link NA110U2 10/100 AS=yes, AP=yes, AX4=yes A-Link NA1GU 10/100/1000 AS=no, AP=no, AX4=no Belkin F5D5055 10/100/1000 AS=yes, AP=no, AX4=yes 0b95:1720 0b95:1780 050d:5055 Linksys USB200M 10/100 AS=yes, AP=yes, AX4=yes 13b1:0018 ver. 2.1 tested Compact Flash peripherals tested with AS229x Working modems CF modems has built-in support. Name Type VID:PID Port Notes Anycom GS-320 GPRS 0279:950b /dev/ttyS0 FCC ID: MSQAGC100 Audiovox RTM-8000 GPRS 0279:950b /dev/ttyS0 FCC ID: QDJ-200205EDS01 Enfora GSM0110 GPRS 01e1:0300 /dev/ttyS0 FCC ID: MIVGSM0110 Non-working modems Name Type VID:PID Notes Pretec OD-GRWXX-A GPRS 02a5:0000 fails to connect Non-working Wi-Fi cards Please refer to User Guide of software release 3.2 to see which CF Wi-Fi cards were supported in that older version. Kernel used in newer versions doesn't support CF Wi-Fi cards in any usable level. Copyright 2000-2011 Bluegiga Technologies Page 47 of 61 Name VID:PID Chipset Notes AmbiCom WL1100C-CF d601:0002 prism FCC ID: NI3IS20V35 Ambicom WL54-CF 02df:8103 libertas FCC ID: P5T-WL54CF, chipset revision too old Ambicom WL5400-CF 02df:8103 libertas insertion reboots AS Canon K30225 D-Link DCF-660W Linksys WCF12 Linksys WCF54G Pretec 802.11g 0004:2003 prism OEM version tested d601:0005 prism FCC ID: M4Y-08150 028a:0673 prism 0156:0004 ?

02df:8103 libertas?

Pretec OC-WLBXX-A 0156:0002 prism FCC ID: P5T-1100CCF SMC EZ Connect SMC2642W V2 EU

(11Mb/s) d601:0005 prism FCC ID: M4Y-08150 Socket Go Wi-Fi! P500 0104:5911 ?

Working storage devices All CF memory cards should work. Working GPS cards CF GPS cards has built-in support. Name VID:PID Port Notes Pretec CompactGPS 02a5:0000 /dev/ttyS0 9600bps Rikaline GPS-6021-X6 0104:01e4 /dev/ttyS0 1200bps Copyright 2000-2011 Bluegiga Technologies Page 48 of 61 8.3 Available Software Packages Package badctl bash bgtupnpd bluetooth Description Installed by default Bluegiga utility for controlling Access Devices. GNU Projects Bourne Again SHell, interactive shell with Bourne shell syntax. Universal plug and play daemon Bluegiga iWRAP service. bluez-hcidump Bluetooth packet analyzer. bluez-libs bstool btcli btd btlogger btserver busybox captivednsd Bluetooth libraries needed by bluez-hcidump. Bluegiga Bluetooth baseband control utilities including btclass command. Bluegiga iWRAP server command line interface utility. Bluegiga HDP server Bluegiga example: a simple Bluetooth RFCOMM server. Bluegiga example: an advanced iWRAP client. Provides tens of general userland utilities. captivednsd, the Captive Domain Name Server, returns same authorative response to every query. captiveportal Bluegiga Captiveportal software. captiveportalbundle Bluegiga captive portal software bundle ccrfiler chkconfig cifs-client configreset connector curl-cacerts curl dataflasher dbus-cplusplus dbus dbussetupd dfu dnsmasq dosfstools dropbear Bluegiga CCR filer application Bluegiga utilities: chkconfig and service commands. Mount helper utility for Linux CIFS VFS client. Bluegiga config reset script. Bluegiga Connector, service which automatically opens and maintains connections to specified Bluetooth devices. CA certs for Curl. Command line tool for transferring files with URL syntax. Bluegiga system update and bootloader configuration utility. C++ API for D-BUS. DBUS Bluegiga setup and other utilities D-Bus bridge Bluegiga Bluetooth baseband firmware upgrade tool. Dnsmasq: A lightweight DNS forwarder and DHCP server. DOS filesystem utils. SSH server and client yes no yes yes no no yes yes no no no yes no no no no yes no yes yes no no yes no no no yes no yes no Copyright 2000-2011 Bluegiga Technologies Page 49 of 61 duma dun ed ehealthbundle ehealthxml evtest expat finder forkserver ftpd ftp gdbserver ghealthposter glibc-devel glibc googleh9 googlehealth hdpd helloworld hostapd httppost Detect Unintended Memory Access Bluegiga iWRAP service helper application. POSIX-compliant line editor. Bluegiga eHealth bundle XMLs and defines used in SDK evtest: Event device test program The Expat XML Parser Bluegiga utility to find other Bluetooth Access Devices in the network. Bluegiga example: the simplest Bluetooth RFCOMM server. Simple FTP server. FTP client application. Remote server for the GNU Debugger Google H9 data poster application The GNU C library. The GNU C library. Google H9 eHealth service Google Health eHealth service Health Device Protocol daemon Bluegiga example: Hello world!

Utility programs for WPA and RSN authenticator. Generic HTTP post JSON format eHealth service http-upload-handler HTTP upload handler iptables iptables-extra iptables-ipv6 json-c jsoncpp Administration tool for the Linux kernel IP packet filter. Administration tool for the Linux kernel IP packet filter. Administration tool for the Linux kernel IP packet filter. JSON-C library A simple API to manipulate JSON value, handle serialization and unserialization to string json-dbus-bridge D-Bus JSON bridge kernel Linux kernel. kernel-modules-bluegiga Bluegiga hardware support kernel module kernel-modules-bluez Linux kernel BlueZ modules. kernel-modules Linux kernel. kernel-modules-media Linux kernel module providing support for webcams etc. kernel-modules-modem Linux kernel modules providing support for USB modems. kernel-modules-nfc NFC drivers. no no no no no no yes yes no no no no no no yes no no no no yes no no yes no no no no no yes yes no yes no yes no Copyright 2000-2011 Bluegiga Technologies Page 50 of 61 no no no no yes yes no no yes yes yes no no no no no no yes no no no no yes kernel-modules-ralink kernel wifi modules for ralink RT2870/RT3070/RT3370/RT3572/RT8070 kernel-modules-realtek Linux kernel module for Realtek USB Wi-Fi chipsets. kernel-modules-sound Linux kernel sound modules. kernel-modules-wifi-experimental kernel linuxwireless tree kernel-modules-wifi Wi-Fi drivers and firmwares kitt ledtest libao libbghw libbgnet libbgobex libevent libfcgi libfforwarder libfreetype libgd libjpeg libnl libogg libpcap libpng libusb-1.0 libusb libv4l2 libvorbis lighttpd-mod-alias lighttpd-mod-compress lighttpd-mod-evasive lighttpd-mod-evhost lighttpd-mod-expire Bluegiga utility for controlling LEDs (and buzzer). Bluegiga example: LED control. A Cross-platform Audio Library Bluegiga hardware library. Bluegiga socket, iWRAP and watchdog access libraries. Bluegiga iWRAP OBEX libraries. Libevent library FastCGI library Reliable file forwarder A Free, High-Quality, and Portable Font Engine. GD is an open source code library for the dynamic creation of images by programmers. This package contains C software to implement JPEG image compression and decompression. Library for applications dealing with netlink sockets. An implementation of the public domain Ogg bitstream format Provides portable framework for low-level network monitoring. Needed by tcpdump. Libpng is the official PNG reference library. Library for use by user level applications to access USB devices. Library for use by user level applications to access USB devices. Library for use by user level applications to access v4l2 devices. no Vorbis is a general purpose audio and music encoding format Secure, fast, compliant, flexible and small memory footprint http server. Secure, fast, compliant, flexible and small memory footprint http server. Secure, fast, compliant, flexible and small memory footprint http server. Secure, fast, compliant, flexible and small memory footprint http server. Secure, fast, compliant, flexible and small memory footprint http server. no no no no no no Copyright 2000-2011 Bluegiga Technologies Page 51 of 61 lighttpd-mod-extforward lighttpd-mod-fastcgi Secure, fast, compliant, flexible and small memory footprint http server. Secure, fast, compliant, flexible and small memory footprint http server. lighttpd-mod-flv-streaming Secure, fast, compliant, flexible and small memory footprint http server. lighttpd-mod-proxy lighttpd-mod-scgi Secure, fast, compliant, flexible and small memory footprint http server. Secure, fast, compliant, flexible and small memory footprint http server. lighttpd-mod-secdownload Secure, fast, compliant, flexible and small memory footprint http server. lighttpd-mod-setenv Secure, fast, compliant, flexible and small memory footprint http server. lighttpd-mod-simple-vhost Secure, fast, compliant, flexible and small memory footprint http server. lighttpd-mod-status lighttpd-mod-userdir lighttpd-mod-usertrack lighttpd-mod-webdav lighttpd limppu lottery lzo m2n mailhealth makesms make maradns mg mjpg-streamer mtd-utils ncurses net-snmp nfs-utils obexbrowser Secure, fast, compliant, flexible and small memory footprint http server. Secure, fast, compliant, flexible and small memory footprint http server. Secure, fast, compliant, flexible and small memory footprint http server. Secure, fast, compliant, flexible and small memory footprint http server. Secure, fast, compliant, flexible and small memory footprint http server. More advanced demonstration application Bluegiga example: lottery extension for obexsender service. A real-time data compression library. Bluegiga example: machine-2-network (M2N) with syslog. Example Bluegiga eHealth to email backend Bluegiga example: generating outgoing messages for Bluegiga SMS gateway. The Make. DNS server. Mg is a Public Domain EMACS style editor. Application to stream JPEG files over an IP-based network from the webcam. MTD utils. Library for displaying and updating text on text-only terminals. Suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. NFS server. Bluegiga iWRAP utility. A command line OBEX client interface. no no no no no no no no no no no no no no no no no no no no no no no no no no no no Copyright 2000-2011 Bluegiga Technologies Page 52 of 61 yes yes yes yes no yes no yes no yes no no no no no no no no no yes yes obexget obexsender obexsender-db obexserver Bluegiga iWRAP OBEX utilities: obexput and obexget commands for transfering files to/from remote devices with ObjP/FTP support. Bluegiga proximity marketing service. Bluegiga proximity marketing device database. Bluegiga iWRAP service: ObjP and FTP server. oggplayerbundle Bluegiga oggplayer bundle openntpd NTP (RFC-1305) client and server. openssh-sftp-server sftp support for Dropbear SSH openssh openssl-progs openssl openvpn oxpjsongen oxpstack pcsc-lite-ccid pcsc-lite perl php-mod-gd SSH server and client Toolkit implementing SSL v2/v3, TLS v1 and general purpose cryptography library. Toolkit implementing SSL v2/v3, TLS v1 and general purpose cryptography library. An open source VPN daemon. Collects data from the OXP stack and places it in a json formatted file Optimized exchange protocol (OXP) stack SCard interface for communicating to smart cards and readers. SCard interface for communicating to smart cards and readers. A programming language. PHP: Hypertext Preprocessor. php-mod-openssl PHP: Hypertext Preprocessor. php ppp readline rootfiles rsync rzsz sbc screen screen-utf8 searchclient securitytool serialport PHP: Hypertext Preprocessor. Point-to-Point Protocol userland driver. GNU Readline library, providing set of functions for use by applications that allow users to edit command lines as they are typed in. Bluegiga Access Server and Access Point filesystem skeleton. yes Utility that provides fast incremental file transfer Provides X/Y/Zmodem file transfer tools. SBC encoder and decoder. Screen is a full-screen window manager that multiplexes a physical terminal between several processes, typically interactive shells. Screen is a full-screen window manager that multiplexes a physical terminal between several processes, typically interactive shells. A simple demonstration application how to do inquiry Bluegiga security configuration tool Bluegiga iWRAP service: SPP client/server. no no no no no no no yes Copyright 2000-2011 Bluegiga Technologies Page 53 of 61 setup setup-helloworld setup-json-bridge smsgw socat sqlite strace sysfsutils tcpdump termcap Bluegiga Access Server and Access Point configuration utility and commands wrapid and supportinfo. yes Bluegiga example: extending setup application. Setup-Json-bridge Bluegiga SMS Gateway. SOcket CAT establishes byte streams and transfers data between them SQLite is a software library that implements a self-contained, serverless, zero-configuration, transactional SQL database engine. System call trace, i.e. a debugging tool. These are a set of utilites built upon sysfs, a new virtual filesystem in Linux kernel versions 2.5+ that exposes a systems device tree. Utility to monitor network traffic. Basic system library needed to access the termcap database. toolchain-native Toolchain tremor tzdata Ogg Vorbis decoder, also known as Tremor. Timezone. usb-modeswitch Mode switching tool for USB modems. vorbis-tools watchdog webui Ogg Vorbis tools (ogg123). Bluegiga user level watchdog. HDP (Health Device Profile) user interface demo webui-locale-fi Finnish localization for web user interface webui-module-example Example module for web user interface wireless-tools Package containing utilities to manage Wireless LAN specific parameters. wpa-supplicant Utility programs for WPA and RSN supplicant. wpkgd www zlib Bluegiga software component management service. Bluegiga example: demonstration of WWW server capabilities. General purpose compression library. no no no no no no no no yes no no yes yes no yes no no no yes yes yes no yes Copyright 2000-2011 Bluegiga Technologies Page 54 of 61 8.4 Enabled Busybox Applets Command Description

Check file types, compare values etc. Return a 0/1 exit code. Check file types, compare values etc. Return a 0/1 exit code. addgroup Add a group or add an user to a group. adduser adjtimex ar arp arping ash awk Add an user. Tune kernel clock. Create, modify, and extract from archives. Manipulate ARP cache. Send arp request to a neighbour host. The ash shell. Pattern scanning and processing language. basename Strip directory and suffix from filenames. brctl bunzip2 bzcat bzip2 cat chattr chgrp chmod chown chroot clear cmp comm cp cpio crond crontab cryptpw cut date dd Manager ethernet bridges. A block-sorting file decompressor. Decompresses files to stdout. A block-sorting file compressor. Concatenate files and print on the standard output. Change file attributes on an ext2 fs Change group ownership. Change file access permissions. Change file owner and group. Run command or interactive shell with special root directory. Clear the terminal screen. Compare two files. Compare two sorted files line by line. Copy files and directories. Copy files to and from archives. A daemon to execute scheduled commands. This server is configurable through the var/spool/cron/crontabs/root crond. command in the same way as any Linux file or the crontab Maintain crontab files for individual users. Output crypted string. Remove sections from each line of files. Print or set the system date and time. Convert and copy a file. Copyright 2000-2011 Bluegiga Technologies Page 55 of 61 delgroup deluser depmod df diff dirname dmesg Delete group from system or user from group. Delete user from system. Program to generate modules.dep and map files. Report file system disk space usage. Find differences between two files. Strip non-directory suffix from file name. Print or control the kernel ring buffer. dnsdomainname Show the system's DNS domain name dpkg A medium-level package manager for (.deb) packages. dpkg-deb Debian package archive (.deb) manipulation tool. du Estimate file space usage. dumpleases Display DHCP leases granted by udhcpd. echo egrep eject env expr false fgrep find flock free fuser getty grep Display a line of text. Print lines matching a pattern. Eject device (needed by some modems to switch mode). Print the current environment or run a program after setting up the specified environment. Evaluate expressions. Do nothing, unsuccessfully. Print lines matching a pattern. Search for files in a directory hierarchy.

(Un)lock file descriptor, or lock. Display amount of free and used memory in the system. Identify processes using files or sockets. Open a tty, prompt for a login name, then invoke /bin/login. Print lines matching a pattern. gunzip Expand files. gzip halt head Compress files. Stop the system. Output the first part of files. hexdump Ascii, decimal, hexadecimal, octal dump. hostid Print the numeric identifier for the current host. hostname Show or set the system's host name. httpd hwclock id ifconfig Web server. Another Web server, lighttpd

, is available as a separate software component. Query and set the hardware clock (RTC). Print user identity. Configure a network interface. Copyright 2000-2011 Bluegiga Technologies Page 56 of 61 inetd init insmod ip ipaddr iplink iproute Internet services daemon. Notice that this server is disabled by default. Use the WWW interface of command to enable it. chkconfig inetd on application or the setup Process control initialization. Simple program to insert a module into the Linux kernel. Linux ipv4 protocol implementation. Displays addresses and their properties, adds new addresses and deletes old ones. Network device configuration. Advanced ip routing and network device configuration tools.. iptunnel Tunnel over IP. kill killall klogd less ln logger login losetup ls lsattr lsmod lsusb lzcat Terminate a process. Kill processes by name. Kernel log daemon. Opposite of more. Make links between files. A shell command interface to the syslog system log module. Sign on. Set up and control loop devices. List directory contents. List file attributes on an ext2 fs. Program to show the status of modules in the Linux kernel. Displays information about USB buses in the system and the devices connected to them. Uncompress to stdout. makemime Create multipart MIME-encoded message from files specified. md5sum mdev Compute and check md5 message digest. System device manipulation tool. microcom Copy bytes for stdin to TTY and from TTY to stdout. Minimal TTY terminal. mkdir mknod Make directories. Make block or character special files. mkpasswd Crypt (password) using crypt system call. mkswap mktemp Set up a Linux swap area. Make temporary filename (unique). modprobe Program to add and remove modules from the Linux kernel. more mount mv nc View file or standard input one screenful at a time. Mount filesystems. Move (rename) files. Open a pipe to ipaddress:port or file. netstat Display networking information. Copyright 2000-2011 Bluegiga Technologies Page 57 of 61 nice nohup nslookup passwd patch pgrep pidof ping ping6 pkill Run a program with modified scheduling priority. Run a command immune to hangups, with output to a non-tty. Query Internet name servers interactively. Update a user's authentication tokens(s). Apply a diff file to an original. Display process(es) selected by regex. List PIDs of all processes with names that match one specified. Send icmp echo_request to network hosts. Send icmp echo_request to network hosts. Send a signal to process(es) selected by regex. poweroff Stop the system. printf ps pwd rdate readlink realpath reboot renice reset resize rm rmdir rmmod route sed Format and print data. Report a snapshot of the current processes. Print name of current/working directory. Get the time via the network. Display value of a symbolic link. Return the canonicalized absolute pathname. Reboot the system. Alter priority of running processes. Reset the screen. Resize the screen. Remove files or directories. Remove empty directories. Remove a module from the Linux kernel. Edit the kernels routing tables. Stream editor for filtering and transforming text. sendmail Send an email. seq sh Print a sequence of numbers. Shell, the standard command language interpreter. sha1sum Compute and check sha1 message digest. sleep sort strings stty su sulogin swapoff Delay for a specified amount of time. Sort lines of text files. Print the strings of printable characters in files. Change and print terminal line settings. Run a shell with substitute user and group ids. Single user login. Stop swapping to file/device. Copyright 2000-2011 Bluegiga Technologies Page 58 of 61 swapon Start swapping to file/device. sync sysctl Flush file system buffers. Read/write system parameters. syslogd System logger. tail tar tcpsvd telnet telnetd test tftp tftpd time top touch tr Output the last part of files. Create, extract, or list files from a tar file. Create TCP socket, bind it to ip:port and listen for incoming connection. Run PROG for each connection. User interface to the telnet protocol. Telnet daemon. Check file types and compare values. TFTP client. TFTP server. Run a program with arguments specified. When command finishes, command's resource usage information is displayed. Provide a view of process activity in real time. Change file timestamps. Translate or delete characters. traceroute Print the route packets trace to network host. true tty ttysize udhcpc udhcpd udpsvd umount uname uniq unlzma unzip unxz uptime usleep Do nothing, successfully. Print the file name of the terminal connected to standard input. Print dimension(s) of standard input's terminal, on error return 80x25. DHCP client. DHCP daemon for providing automatic network configuration for clients in the network. Create UDP socket, bind it to ip:port and wait for incoming packets. Run PROG for each packet, redirecting all further packets with same peer ip:port to it. Unmount file systems. Print system information. Report or omit repeated lines. Uncompress file. List, test and extract compressed files in a zip archive. Decompress file. Tell how long the system has been running. Sleep some number of microseconds. uudecode uuencode Decode a binary file. Encode a binary file. vi wc Screen-oriented (visual) display editor. Print the number of newlines, words, and bytes in files. Copyright 2000-2011 Bluegiga Technologies Page 59 of 61 wget which The non-interactive network downloader. Shows the full path of (shell) commands. whoami Print effective userid. xargs xzcat yes zcat zcip Build and execute command lines from standard input. Decompress to standard output. Output a string repeatedly until killed. Expand and concatenate data. Manage a ZeroConf IPv4 link-local address. Copyright 2000-2011 Bluegiga Technologies Page 60 of 61 9 Contact information Sales:

sales@bluegiga.com Technical support:

support@bluegiga.com Orders:

WWW:

http://techforum.bluegiga.com orders@bluegiga.com http://www.bluegiga.com http://www.bluegiga.hk Head Office / Finland:

Phone: +358-9-4355 060 Fax: +358-9-4355 0660 Sinikalliontie 5 A 02630 ESPOO FINLAND Head address / Finland:

P.O. Box 120 02631 ESPOO FINLAND Sales Office / USA:

Phone: +1 770 291 2181 Fax: +1 770 291 2183 Bluegiga Technologies, Inc. 3235 Satellite Boulevard, Building 400, Suite 300 Duluth, GA, 30096, USA Sales Office / Hong-Kong: Phone: +852 3182 7321 Fax: +852 3972 5777 Bluegiga Technologies, Inc. 19/F Silver Fortune Plaza, 1 Wellington Street, Central Hong Kong Copyright 2000-2011 Bluegiga Technologies Page 61 of 61