BLED112 Bluetooth USB Dongle User manual

BLED112 USER GUIDE Friday, 19 August 2011 Version 1.0 Copyright 2000-2011 Bluegiga Technologies All rights reserved. Bluegiga Technologies assumes no responsibility for any errors which may appear in this manual. Furthermore, Bluegiga Technologies reserves the right to alter the hardware, software, and/or specifications detailed here at any time without notice and does not make any commitment to update the information contained here. Bluegigas products are not authorized for use as critical components in life support devices or systems. The WRAP is a registered trademark of Bluegiga Technologies The Bluetooth trademark is owned by the Bluetooth SIG Inc., USA and is licensed to Bluegiga Technologies. All other trademarks listed herein are owned by their respective owners. Bluegiga Technologies Oy VERSION HISTORY Version 1.0 Comment Bluegiga Technologies Oy TABLE OF CONTENTS Installation .................................................................................................................................................... 5 1 2 General Information and Specifications ....................................................................................................... 6 3 Certifications ................................................................................................................................................. 7 4 Contact Information ...................................................................................................................................... 9 Bluegiga Technologies Oy 1 Installation Please refer to BLEGUI User Guide. BLEGUI User Guide can be down loaded from

(http://www.bluegiga.com/support). Bluegiga Technologies Oy Preliminary information subject to change Page 5 of 9 2 General Information and Specifications BLED112, Bluetooth low energy USB Dongle is a single mode USB device enabling Bluetooth low energy connectivity for PCs and other devices having a USB port. BLED112 Bluetooth Dongle integrates all Bluetooth 4.0 single mode features. The USB dongle can simulate standard USB device, virtual COM port or USB HID device. The HID can be used for accessories like keyboards and mice, because no driver is needed. The COM port emulation enables simple host application development using a simple application programming interface. The BLED112 can be used for Bluetooth low energy development. With two BLED112 dongles you can quickly prototype new low energy application profiles by utilizing Bluegiga BG Profile ToolkitTM and also automate inmodule software functions with BGScriptTM. Key Features Integrated Bluetooth low energy stack Bluetooth v.4.0, single mode compliant Supports master and slave modes 4+ simultaneous connection is master mode GAP, GATT, L2CAP, SMP Bluetooth low energy profiles Radio performance TX power: +4 dBm to -23dBm RX sensitivity: -87dBm to -93dBm USB, USB HID and virtual COM port emulation Bluetooth Low Energy Features Bluetooth 4.0 single mode compliant radio Master and slave mode support L2CAP, GAP, ATT and GATT support Security manager Advertizing, broadcasting, connections Built-in profiles Hardware Features Bluetooth low energy radio Built-in antenna 8051 microcontroller 8 kB RAM 128kB flash USB 2.0 device Programmable led 3 x timer Integrated temperature sensor Bluegiga Technologies Oy Preliminary information subject to change Page 6 of 9 3 Certifications 3.1 Bluetooth BLED112 Bluetooth low energy module is Bluetooth qualified and listed as an End Product. 3.2 FCC and IC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Increase the separation between the equipment and receiver Reorient or relocate the receiving antenna Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help FCC Caution : To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. IC Statements:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio Bluegiga Technologies Oy Preliminary information subject to change Page 7 of 9 interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Dclaration dIC :

Ce dispositif est conforme aux normes RSS exemptes de licence dIndustrie Canada. Son fonctionnement est assujetti aux deux conditions suivantes : (1) ce dispositif ne doit pas provoquer de perturbation et (2) ce dispositif doit accepter toute perturbation, y compris les perturbations qui peuvent entraner un fonctionnement non dsir du dispositif. Selon les rglementations dIndustrie Canada, cet metteur radio ne doit fonctionner quavec une antenne dune typologie spcifique et dun gain maximum (ou infrieur) approuv pour lmetteur par Industrie Canada. Pour rduire les ventuelles perturbations radiolectriques nuisibles dautres utilisateurs, le type dantenne et son gain doivent tre choisis de manire ce que la puissance isotrope rayonne quivalente

(P.I.R.E.) nexcde pas les valeurs ncessaires pour obtenir une communication convenable. 3.3 CE BLED112 is in conformity with the essential requirements and other relevant requirements of the R&TTE Directive (1999/5/EC). The product is conformity with the following standards and/or normative documents. EMC EN 301 489-17 V.1.3.3 in accordance with EN 301 489-1 V1.8.1 Radiated emissions EN 300 328 V1.7.1 Safety EN 60950-1 Bluegiga Technologies Oy Preliminary information subject to change Page 8 of 9 4 Contact Information Sales:

Technical support:

sales@bluegiga.com support@bluegiga.com http://techforum.bluegiga.com orders@bluegiga.com Orders:

WWW:

Head Office / Finland:

Postal address / Finland:

Sales Office / USA:

Sales Office / Hong-Kong:

www.bluegiga.com www.bluegiga.hk Phone: +358-9-4355 060 Fax: +358-9-4355 0660 Sinikalliontie 5A 02630 ESPOO FINLAND P.O. BOX 120 02631 ESPOO FINLAND Phone: +1 770 291 2181 Fax: +1 770 291 2183 Bluegiga Technologies, Inc. 3235 Satellite Boulevard, Building 400, Suite 300 Duluth, GA, 30096, USA Phone: +852 3182 7321 Fax: +852 3972 5777 Bluegiga Technologies, Inc. 19/F Silver Fortune Plaza, 1 Wellington Street, Central Hong Kong Bluegiga Technologies Oy Preliminary information subject to change Page 9 of 9