FCC ID: QOQMGM12P2 MGM12P2 802.15.4 and Bluetooth 5.0 module

by: Silicon Laboratories Finland Oy latest update: 2018-09-07 model: MGM12P2

Three grants have been issued under this FCC ID from 08/04/2017 to 09/07/2018 (this is one of eleven releases in 2018 for this grantee). Public details available include frequency information, internal & external photos, and manuals. some products also feature user submitted or linked drivers, troubleshooting guides, password defaults, instructions, & warrantee terms.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 17
1 ~ 2018-09-07 7
2 ~ 2017-11-07 7
3 ~ 2017-08-04 10

app s				submitted / available
1 2 3	Installation Guide	Users Manual	pdf	426.41 KiB	June 11 2017 / July 11 2017
1 2 3		Cover Letter(s)	pdf		June 09 2018 / July 09 2018
1 2 3		External Photos	pdf		June 09 2018 / July 09 2018
1 2 3		Cover Letter(s)	pdf		June 09 2018 / July 09 2018
1 2 3		Cover Letter(s)	pdf		June 09 2018 / July 09 2018
1 2 3		Test Report	pdf		June 09 2018 / July 09 2018
1 2 3		Test Report	pdf		June 09 2018 / July 09 2018
1 2 3		Test Setup Photos	pdf		June 09 2018 / July 09 2018
1 2 3		RF Exposure Info	pdf		June 11 2017 / July 11 2017
1 2 3		Test Report	pdf		June 11 2017 / July 11 2017
1 2 3		Cover Letter(s)	pdf		March 08 2017 / April 08 2017
1 2 3		External Photos	pdf		March 08 2017 / April 08 2017
1 2 3		Internal Photos	pdf		March 08 2017 / April 08 2017
1 2 3		ID Label/Location Info	pdf		March 08 2017 / April 08 2017
1 2 3		Cover Letter(s)	pdf		March 08 2017 / April 08 2017
1 2 3		RF Exposure Info	pdf		March 08 2017 / April 08 2017
1 2 3		Test Setup Photos	pdf		March 08 2017 / April 08 2017

exhibit
download
text

1 2 3

Installation Guide

Users Manual

pdf

426.41 KiB

June 11 2017 / July 11 2017

INSTALLATION GUIDE Alberga Business Park, Bertel Jungin aukio 3 FI-02600 Espoo, Finland Phone: +358 9 435 5060 www.silabs.com Figure 9.4: Recommended PCB Land Pattern Qualified Antenna Types This device has been designed to operate with a standard 2.14 dBi dipole antenna. Any antenna of a different type or with a gain higher than 2.14 dBi is strictly prohibited for use with this device. Using an antenna of a different type or gain more than 2.14 dBi will require additional testing for FCC, CE and IC. The required antenna impedance is 50 . Antenna type Dipole Maximum gain 2.14 dBi Table 1: Qualified antennas for MGM12Px CE The MGM12P02 and MGM12P22 modules are in conformity with the essential requirements and other relevant requirements of the Radio Equipment Directive(RED). Please note that every application using the MGM12P will need to perform the radio EMC tests on the end product according toEN 301 489-17. Separate RF testing is not required provided that the customer follows the module manufacturer's recommendations and instructions and does not make modifications e.g. to the provided antenna solutions or requirements. A formal DoC is available via www.silabs.com MGM12P32 module is inconformity with the essential requirements and other relevant requirements of the Radio Equipment Directive(RED) at nominal 10 dBm transmit power. The transmit power of the module is not limited and when an end product is using MGM12P32, the end product manufacturer is responsible that the end product is in inconformity of all relevant requirements of the RED. Page 2 of 7 FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Silicon Labs could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter meets both portable and mobile limits as demonstrated in the RF Exposure Analysis. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM Responsibilities to comply with FCC Regulations OEM integrator is responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). With MGM12P22GA, MGM12P22GE, MGM12P02GA and MGM12P02GE the antenna(s) must be installed such that a minimum separation distance of 6.7mm is maintained between the radiator (antenna) and all persons at all times. With MGM12P32GA and MGM12P32GE the antenna(s) must be installed such that a minimum separation distance of 39mm is maintained between the radiator (antenna) and all persons at all times. The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. IMPORTANT NOTE: In the event that the above conditions cannot be met (for certain configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product

(including the transmitter) and obtaining a separate FCC authorization. End Product Labeling The variants of MGM12P Modules are labeled with their own FCC IDs. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final product must be labeled in a visible area with the following:

Page 3 of 7 MODELS MGM12P02GE and MGM12P02GA:

Contains Transmitter Module FCC ID: QOQMGM12P0 or Contains FCC ID: QOQMGM12P0 MODELS MGM12P22GE and MGM12P22GA:

Contains Transmitter Module FCC ID: QOQMGM12P2 or Contains FCC ID: QOQMGM12P2 MODELS MGM12P32GE and MGM12P32GA:

Contains Transmitter Module FCC ID: QOQMGM12P3 or Contains FCC ID: QOQMGM12P3 The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module or change RF related parameters in the user manual of the end product. ISED Canada This radio transmitter (IC: 5123A-MGM12P0, IC: 5123A-MGM12P2 and IC: 5123A-

MGM12P3) has been approved by Industry Canada to operate with the antenna types listed above with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device This device complies with Industry Canadas license-exempt RSS standards. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device RF Exposure Statement Exception from routine SAR evaluation limits are given in RSS-102 Issue 5. MGM12P22GA, MGM12P22GE, MGM12P02GA and MGM12P02GE modules meets the given requirements when the minimum separation distance to human body is 20 mm. MGM12P32GA and MGM12P32GA modules meets the given requirements when the minimum separation distance to human body is 35 mm. RF exposure or SAR evaluation is not required when the separation distance is same or more than stated above. If the separation distance is less than stated above the OEM integrator is responsible for evaluating the SAR. OEM Responsibilities to comply with IC Regulations Page 4 of 7 The MGM12P module has been certified for integration into products only by OEM integrators under the following conditions:

The antenna(s) must be installed such that a minimum separation distance as stated above is maintained between the radiator (antenna) and all persons at all times. The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter. As long as the two conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions cannot be met (for certain configurations or co-location with another transmitter), then the ISEDC authorization is no longer considered valid and the IC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product

(including the transmitter) and obtaining a separate ISEDC authorization. End Product Labeling The MGM12P modules are labeled with their own IC ID. If the IC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final end product must be labeled in a visible area with the following:

MODELS MGM12P02GE and MGM12P02GA:

Contains Transmitter Module IC: 5123A-MGM12P0 or Contains IC: 5123A-MGM12P0 MODELS MGM12P22GE and MGM12P22GA:

Contains Transmitter Module IC: 5123A-MGM12P2 or Contains IC: 5123A-MGM12P2 MODELS MGM12P32GE and MGM12P32GA:

Contains Transmitter Module IC: 5123A-MGM12P3 or Contains IC: 5123A-MGM12P3 The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module or change RF related parameters in the user manual of the end product ISEDC (Franais) Industrie Canada a approuv lutilisation de cet metteur radio (IC: 5123A-MGM12P0, IC:

5123A-MGM12P2, IC: 5123A-MGM12P3) en conjonction avec des antennes de type dipolaire 2.14dBi ou des antennes embarques, intgre au produit. Lutilisation de tout autre type dantenne avec ce composant est proscrite. Ce composant est conforme aux normes RSS, exonres de licence d'Industrie Canada. Son mode de fonctionnement est soumis aux deux conditions suivantes :

Page 5 of 7 1. Ce composant ne doit pas gnrer dinterfrences 2. Ce composant doit pouvoir est soumis tout type de perturbation y compris celle pouvant nuire son bon fonctionnement. Dclaration d'exposition RF L'exception tire des limites courantes d'valuation SAR est donne dans le document RSS-

102 Issue 5. Les modules MGM12P22GA, MGM12P22GE, MGM12P02GA et GM12P02GE rpondent aux exigences requises lorsque la distance minimale de sparation avec le corps humain est de 20 mm. Les modules MGM12P32GA et MGM12P32GA rpondent aux exigences requises lorsque la distance minimale de sparation avec le corps humain est de 35 mm. La dclaration dexposition RF ou l'valuation SAR n'est pas ncessaire lorsque la distance de sparation est identique ou suprieure celle indique ci-dessus. Si la distance de sparation est infrieure celle mentionnes plus haut, il incombe l'intgrateur OEM de procd une valuation SAR. Responsabilits des OEM pour une mise en conformit avec le Rglement du Circuit Intgr Le module MGM12P a t approuv pour l'intgration dans des produits finaux exclusivement raliss par des OEM sous les conditions suivantes:

L'antenne (s) doit tre installe de sorte qu'une distance de sparation minimale indique ci-dessus soit maintenue entre le radiateur

(antenne) et toutes les personnes avoisinante, ce tout moment. Le module metteur ne doit pas tre localis ou fonctionner avec une autre antenne ou un autre transmetteur que celle indique plus haut. Tant que les deux conditions ci-dessus sont respectes, il nest pas ncessaire de tester ce transmetteur de faon plus pousse. Cependant, il incombe lintgrateur OEM de sassurer de la bonne conformit du produit fini avec les autres normes auxquelles il pourrait tre soumis de fait de lutilisation de ce module (par exemple, les missions des priphriques numriques, les exigences de priphriques PC, etc.). REMARQUE IMPORTANTE: dans le cas o ces conditions ne peuvent tre satisfaites (pour certaines configurations ou co-implantation avec un autre metteur), l'autorisation ISEDC n'est plus considre comme valide et le numro didentification ID IC ne peut pas tre appos sur le produit final. Dans ces circonstances, l'intgrateur OEM sera responsable de la rvaluation du produit final (y compris le transmetteur) et de l'obtention d'une autorisation ISEDC distincte. tiquetage des produits finis Les modules MGM12P sont tiquets avec leur propre ID IC. Si l'ID IC n'est pas visible lorsque le module est intgr au sein d'un autre produit, cet autre produit dans lequel le module est install devra porter une tiquette faisant apparaitre les rfrence du module intgr. Dans un tel cas, sur le produit final doit se trouver une tiquette aisment lisible sur laquelle figurent les informations suivantes :

MODLES MGM12P02GE et MGM12P02GA:

"Contient le module transmetteur : 5123A-MGM12P0"

"Contient le circuit: 5123A-MGM12P0 MODLES MGM12P22GE et MGM12P22GA:

"Contient le module transmetteur: 5123A-MGM12P2"

Page 6 of 7 ou

"Contient IC: 5123A-MGM12P2 MODLES MGM12P32GE et MGM12P32GA:

"Contient le module metteur IC: 5123A-MGM12P3"

"Contient IC: 5123A-MGM12P3"

L'intgrateur OEM doit tre conscient quil ne doit pas fournir, dans le manuel dutilisation, d'informations relatives la faon d'installer ou de denlever ce module RF ainsi que sur la procdure suivre pour modifier les paramtres lis la radio. Page 7 of 7

		frequency	equipment class	purpose
1	2018-09-07	2405 ~ 2480	DTS - Digital Transmission System	Class II permissive change or modification of presently authorized equipment
2	2017-11-07	2405 ~ 2480	DTS - Digital Transmission System
3	2017-08-04	2405 ~ 2480	DTS - Digital Transmission System	Original Equipment

Application Forms

app s	Applicant Information
1 2 3	Effective	2018-09-07
1 2 3		2017-11-07
1 2 3		2017-08-04
1 2 3	Applicant's complete, legal business name	Silicon Laboratories Finland Oy
1 2 3	FCC Registration Number (FRN)	0007782659
1 2 3	Physical Address	Alberga Business Park, Bertel Jungin aukio 3
1 2 3		Espoo, N/A 02600
1 2 3		Finland

app s	TCB Information
1 2 3	TCB Application Email Address	h******@acbcert.com
1 2 3	TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques

app s	FCC ID
1 2 3	Grantee Code	QOQ
1 2 3	Equipment Product Code	MGM12P2

app s	Person at the applicant's address to receive grant or for contact
1 2 3	Name	P****** R******
1 2 3	Title	Staff HW Engineer
1 2 3	Telephone Number	+3589********
1 2 3	Fax Number	+3589********
1 2 3	E-mail	p******@silabs.com

app s	Technical Contact
1 2 3	Firm Name	Silicon Laboratories Finland Oy
1 2 3	Name	P** R******
1 2 3	Physical Address	Alberga Business Park
1 2 3		Bertel Jungin aukio 3
1 2 3		Alberga Business Park, Bertel Jungin aukio 3
1 2 3		Espoo, 02600
1 2 3		02600
1 2 3		Finland
1 2 3	Telephone Number	35840********
1 2 3	Telephone Number	+3584********
1 2 3	E-mail	p******@silabs.com

app s	Non Technical Contact
1 2 3	Firm Name	Silicon Laboratories Finland Oy
1 2 3	Name	P** R******
1 2 3	Physical Address	Alberga Business Park, Bertel Jungin aukio 3
1 2 3		02600
1 2 3		Finland
1 2 3	Telephone Number	+3584********
1 2 3	E-mail	p******@silabs.com

app s	Confidentiality (long or short term)
1 2 3	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2 3	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2 3	Is this application for software defined/cognitive radio authorization?	No
1 2 3	Equipment Class	DTS - Digital Transmission System
1 2 3	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	MGM12P2 802.15.4 and Bluetooth 5.0 module
1 2 3		MGM12P2 802.15.4 and Bluetooth 4.2/5.0 module
1 2 3		MGM12P2 802.15.4 module
1 2 3	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2 3	Modular Equipment Type	Single Modular Approval
1 2 3	Purpose / Application is for	Class II permissive change or modification of presently authorized equipment
1 2 3	Purpose / Application is for	Original Equipment
1 2 3	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	No
1 2 3	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2 3	Grant Comments	Output power is conducted. Modular Approval. Certified for mobile and for portable use with the separation distance shown in the filing. Co-location with other transmitter antennas would require the use of FCC multi-transmitter product procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for use of this module in all configurations remains with the Grantee. C2PC application for hardware changes as shown in the filing.
1 2 3		Output power is conducted. Modular Approval. Certified for mobile and for portable use with the separation distance shown in the filing. Co-location with other transmitter antennas would require the use of FCC multi-transmitter product procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for use of this module in all configurations remains with the Grantee. C2PC application to add Bluetooth 4.2/5.0 functionality by firmware change only.
1 2 3		Output power is conducted. Modular Approval. Certified for mobile and for portable use with the separation distance shown in the filing. Co-location with other transmitter antennas would require the use of FCC multi-transmitter product procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for use of this module in all configurations remains with the Grantee.
1 2 3	Is there an equipment authorization waiver associated with this application?	No
1 2 3	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2 3	Firm Name	SGS Fimko Oy
1 2 3	Firm Name	SGS Fimko Ltd
1 2 3	Name	J**** M****
1 2 3	Telephone Number	358-9********
1 2 3	Telephone Number	35896********
1 2 3	Fax Number	358-9********
1 2 3	Fax Number	35896********
1 2 3	E-mail	j******@sgs.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15C		2402	2480	0.00807
1	2	15C		2405	2480	0.00893
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	15C		2402	2480	0.00807
2	2	15C		2405	2480	0.00893
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
3	1	15C		2405.00000000	2480.00000000	0.0089300

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: 2BFVW-AMPR1 Guangzhou Utech Digital CO.,Ltd. 2BFRP-LS1 Shenzhen Galileo Robot Co., Ltd SQG-MT3202230 Ezurio LLC 2A9JD-S320B Shenzhen Jingyun Wulian Technology CO.,Ltd 2BFVR-Q100 Dongguan Jinbaocheng Electronics Co., Ltd.