Document Number : 14-D-0001 Beacon LB2010
(Type marBLE) Product Document Writer: Richard Jung Date: 2014. 11. 26 1 Document Purpose This document was produced for Users understanding and guide Contact For inquiries: sh.roh@sk.com Document version and History No 1 2 3 Version Release Date v1.0 v1.1 v1.2 2014.09.20 2014.11.26 2015.09.09 History First Release Revised Revised Etc Beacon Resale Site http://beacon.diointeractive.com/
2 Table of Content 1. Product Specification ...........................................................................................4 3 1. PRODUCT SPECIFICATION A. Product Overview Compatible with Bluetooth Low Energy, Android 4.3. Battery lasts over 1 year Android Mobile SDK Bluetooth API available: Battery, Device Information, Proximity 4 B. Product Specification l Frequency operating range : 2.402GHz to 2480GHz l Version : BT4.0 (Bluetooth Low Energy) l Operating Voltage : 3.6V l Modulation Techniques : GFSK l Programmable Output Power Ranging From (dBm) : -23 to 4dBm l Receiver sensitivity : -93 dBm l Weight : Main Body 133g, Battery 99g l Dimension : 117 X 117 X 34.5mm l Supported O/S : Android 4.3+, iOS 7+
l Read Range : 5~20m (Distance Controllable/LOS) l Temperature Range : -10 ~ 60 C. Product components l Main Product l Battery: 2ea (SB-C02) 5 Power Supply Use two batteries. Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. l Use switch to turn on/off the power 6 l PG port is for Download purposes only and used by manufacturer l RLV switch is for operators only. RVL switch PG port Power On/OFF switch Notice: Please dont remove the label. Device will be inactivated Operational Description To operate LB2010, minimum voltage of 2.1V is required. Included battery (SBC02) has 3.6V and current of 8.5Ah. LB2010 has LDO and Step-down converter. With input of 3.6V, LDO outputs 3.3V. Output voltage from the LDO will be inserted to Step-down converter, which will output 2.1V to BLE(Bluetooth low energy) IC(CC2540F256). When the voltage is supplied to BLE IC, LED will blink for two seconds. Status check In normal state, LED lamp will blink in green l l When the battery is low, LED lamp will blink in red and they need to be replaced Download port and Function Key are not for general users 7 Mount l Tighten the screws on the wall. l Mounting the LB2010(marBLE) to the screw. Mount hole Cautions l This is a wireless-installation device and may cause interference between radio waves. This device cannot be used for safety-related services. 8 D. Product Support Application l Sample App: https://play.google.com/store/apps/details?id=com.wizturn.manager Bluetooth 4.0 Low Energy(BLE) app for Wizturn Beacon-Type pebBLE. Try to test Wizturn Beacon with this app and learn more about beacon based service.
- Scan marBLE (device discovery) 9 E. Safety Precautions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Only shielded interface cable should be used. Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacture could void the users authority to operate such equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 10 CE WARNING Changes and modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. It is desirable that it be installed and operated with at least 20 cm or more between the radiator and persons body(excluding extremities: hand, wrists, feet, and ankles) FCC ID : 2ADMB-LB2010 For A/S & other inquiries:
l Technical Support : sh.roh@sk.com l Sales & Others Support : http://beacon.diointeractive l A/S Support : (Tel) +82-2-6100-7334
- End of document 11