SN-100T / SN-100C Please carefully read the safety instructions to prevent any unintentional injuries. The pictures in this manual may differ from the actual product.
[Whats included]
Air Cube Micro USB Calbe Quick Guide 2
[Air Cube Overview]
Power/Charging LED When charging battery, red LED lights up. It will turn to green when the bat-
tery has been completely charged. Power Button Pressing the power button more than one second will turn on/off the power. When an alarm goes off, press the button to turn off the alarm. Fine Dust(PM) Density LED This LED shows Fine Dust measure-
ments in five(5) different levels. Bluetooth LED When connected with smartphone, the LED will turn to blue. CO2/ Discomfort Index LED This LED shows CO2 / Discomfort Index measurements in five(5) different levels. Charging Socket Charge the Air Cube with micro 5-pin smartphone charger or micro USB cable. 3
[Turn Power On/Off]
[On]
Press the power button for more than one second. All the LED lights will blink three times simultaneously. Then the Bluetooth LED will blink turning into standby pairing mode. Once its paired up with a smartphone, whenever the power turns on, the Air Cube will automatically start to measure once every fif-
teen(15) seconds. In addition, the device will measure once more if you shake the device.
[Off]
Press the power button for more than two seconds. All the LED lights will blink once and the device will turn off. 4
[LED Display Measurements]
Dangerous Warning Average Normal Very Good Air Quality Very Good Normal Average Warning Discomfort Index
(DI)
~ 67 68 ~ 74 75 ~ 79 80 ~ 84 CO2 (ppm)
~ 450 451 ~ 700 Fine dust g/m3
~ 30 31 ~ 80 701 ~ 1000 81 ~ 120 1001 ~ 2000 121 ~ 200 Dangerous 85 ~
2001 ~
201 ~
5
[Air Cube Application]
Using the Air Cube app, you can check the air quality conditions measured by Air Cube in real time. In addi-
tion, the Air Cube app provides action guide in accord-
ance with each air quality level. You can easily download the mobile application from our Air Cube website (www.aircube.io). After installing the app, you can use it with the Air Cube device. Air Cube app offers convenient features such as setting country-specific air quality standards or alarm notifications depending on the users environment. 6
[Bluetooth Pairing (connection)]
1. Press the power button more than one second. 2. Bluetooth LED will turn to blue and blink, turning into standby pairing mode. 3. When running the air check application, you can ac-
tivate the smartphones Bluetooth simply by following the instructions. 4. In the application settings menu, choose the available pairing device. Then, press the pair button. It is paired up when the message connected with the Air cube is displayed. 5. When its paired up, Bluetooth LED will turn to blue. When running the Air Cube application, you wont need to pair up your Air Cube and the smartphone again if you have paired it up once before.
(Bluetooth 4.0 or above / Coverage: maximum 11 meters) 7
[Charging]
You can charge the device with a micro 5-pin smartphone charger or micro USB cable. The power LED will turn red while charging and it turns green when it is complete. If the battery LED flashes, it means that the battery has less than 10% power. Please charge the device immediately then. Smartphone Charger Micro USB cable 8
[Safety Instructions]
These safety precautions is to prevent any damage, malfunction or injuries. Failure to follow these instructions could result in fire, electric shock, injury or even death Do not place the Air Cube on an unstable surface. The product may be damaged if dropped. Do not disassemble, crush, puncture or shred the Air Cube. Please contact the service center when it needs to be repaired. (If you dis-
assemble the product yourself, warranty will not apply.) Keep the Air Cube dry. Wipe the device with clean dry cloth. (Using oil washing detergent, paint thinner or wet wipes may cause exte-
rior damages, electric shock, breakdown or even a fire.) Please ensure that no substances gets inside the product, such as drinks or water. Also, please avoid from flooding. (This may cause a breakdown or electric shock.) If the product is wet when charging, disconnect the product right away with caution. (This product is made for indoor use and is not water proof.) Do not use the Air Cube in a damp place. (This may cause a fire or electrical shock.) 9 Please do not place the device in a vehicle under direct sunlight, on an electric blanket or on a rug. Also, avoid placing it in hot and humid environment such as sauna for a long time. (Panel disfigu-
ration or it may cause malfunction.) Caution : Failure to follow these instructions may result in injury or product damage. Measurements are reliable data but it is for reference purposes. Therefore, the manufacturer and seller will not be held legally re-
sponsible. Do not let the device be placed in a cold environment such as out-
doors during winter or in a cold storage. It may not work properly.
(Recommended operating environment: 0 ~ 45C) Do not place the Air Cube close to objects with magnets or mag-
netic components. This can cause damage or malfunction. Avoid dropping or knocking it down on hard surface. It may damage the board inside as well as increase the risk of injury by breakdown. Unplug charging accessories and store the device in a safe place when not being used for a long time. Do not connect the unit to other devices in a manner that is not described in the manual. 10
[When Air Cube doesnt work properly]
Please refer to the following actions for different symptoms that may occur and also refer to the user manual enclosed before reporting a device failure. Symptoms Action Power is not turned on Not pairing up The particulate matter measurement too high
/ low CO2 level too high / low Make sure to press the power button more than one second. Check whether the battery is charged.. If you are using USB port, it may not work because of power shortage. Please charge the device by connecting directly to the USB port. Check whether Android OS version is 4.3 or higher. Bluetooth LE (Bluetooth Low Energy) function is supported in Android 4.3 or above. Check whether the iPhone OS version is iOS 6 or higher. Check if there is anything blocking the ventilation socket. Check if the temperature/humidity is either too high or too low. Temperature measure-
ments too high / low Check if the temperature is either too high or too low. Humidity measurement too high / low Check to see if theres water or any forms of liquid which might have penetrated inside the Air Cube. 11
[Product Specification]
System Specification Battery Capacity Operating time Rechargeable Li-Ion 3.7V, 600mAh 24 Hours (may vary depending on the operating environment) 3 Hours Micro USB Adapter Bluetooth 4.0 Low Energy(BLE) 52(W) x 52(L) x 52(H) 0 ~ 500g/m3 0 ~ 45C 5 ~ 95%
0 ~ 5000ppm (SN-100C Only) Charging time Power Interface Dimensions Sensor Specification Particulate Matters Temperature Humidity CO2 UI Specifications Fine Dust & CO2 LED Bluetooth LED Battery LED Button for Power On/Off & Micro USB Jack for Battery Charging Basic Composition Air Cube, Micro USB Cable, Quick Guide Each sensors are applied differently according to the model 10 Digits (Left, Right) 1 Digits (Up) 3 Digits (Down) 12
[Product warranty]
Check if there are anything thats not listed on a prescribed topic warranty Please suggest the warranty to your dealer or Customer Service when failure occurs
(the warranty period is one year from the date of purchase, but the warranty of the battery is six months). Please be sure to fill in the details after purchase and keep it separately. Product service standards When device failure occurs, you may receive customer service for free of charge.
(For refunds, sales receipts must be provided) Consumer damage type Compensation details Within the warranty After the warranty period period When major repair is needed, within 10 days after purchase. Exchange or refund If the product is in need of major repair within a month after purchase Exchange or warranty When replacing is impossible Serviceable In the event of same failure Onerous repair Refund Warranty In the event of up to five different failures Exchange or warranty Repair is impossible If service provider loses the customers device Exchange or refund Unable to repair due to shortage in parts Exchange or warranty Refund of 10% added to the amount of depreciation Refund of 5% added to the amount of depreciation 13 Paid Services 1. For non-failure
- If you call in for service in case there is no problem with the device, service fee will be charged. Thus, please read the instructions carefully. 2. If the failure is due to the negligence of consumer
- Due to users carelessness (drop, immersion, shock, damage, unreasonable be-
havior, etc.)
- If someone other than our service personnel tried to repair the unit and problem occurred
- Failure due to the use of non-genuine parts or accessories
- Malfunctions caused by the users intentional or negligence 3. In other cases
- Failure caused by natural disaster (fire, flood etc.)
- If the sensor performance deteriorates after long-term use (after the warranty period). Product The date of purchase Where to Buy Air Cube
/ /
Model Product Number Warranty One year from the date of purchase If the date of purchase is not checked, the warranty period is calculated from manufacturing date. Details that are not specified is subject to the consumer dispute resolution criteria of the Korea Fair Trade Commission. Customer Service: SK Telecom Inc. Services : www.aircube.io / help@aircube.io 14 MSIP-CMS-SK4-SN-100C Caveator s name : Specific low power wireless devices
(Wireless device for wireless data communication system) FCC ID : 2ADMB-AIRCUBE-BT Business Name : SK Telecom Inc. Manufacturer/Country : NBREDS Inc. / South Korea Rated Voltage : DC 3.7V ,600mAh
* This wireless device may be affected or interfere with wave propaga-
tion during operation. 15