Bluetooth Transmitter & Receiver BTI-041 User Manual Contents:
1. Product Overview-------------------------------------------------------------- 2 2. Basic Operation --------------------------------------------------------------- 3 3. How to use as a Bluetooth Transmitter (TX)---------------------------------- 4 4. How to use as a Bluetooth Receiver (RX)------------------------------------ 7 5. Charging------------------------------------------------------------------------10 6. LED Indicator ------------------------------------------------------------------11 7. Product Specification-----------------------------------------------------------12 8. Attention and Q & A------------------------------------------------------------13 1.Product Overview MFB (Multi Function Button) / LED Indicator / AUX port / Left RCA port /
Right RCA port Mode switch / SPDIF input / charging port / SPDIF output Package Contents:
A. Bluetooth Transmitter & Receiver *1 B. 3.5mm Audio Cable *1 C. Micro USB Charging Cable *1 D. User Manual *1 E. Fiber Optic Cable *1 2. Basic Operation Button Function Power on /
off Pairing mode Operation Long press MFB 2 seconds to power on or off Double press Pairing Button to enter inter into pairing mode. RX mode: Red & Blue LED flash alternately; TX mode:
Blue LED flash MFB (Multi Function Button) Play / pause RX Mode: short press MFB to play or pause music during playing. Not work in TX mode. aptX HD on
/ off Under off status, long press the MFB 7 seconds till Green LED flash for 1 second, then repower on the unit will active the function of aptX HDonce again long press the MFB 7 seconds to Green LED flash twice for to turn off this function. Switch the button to TX side for TX mode, or switch the button to RX side for RX mode.
*The paired records of the last mode will be delete when switch to another mode.
*Pls turn off the units after 3 seconds then switch to another function mode. TX/RX mode selection SPDIF/AUX mode Insert the 3.5 mm audio cable or RCA cable to enter into the AUX mode, insert the fiber optic cable to enter into the SPDIF mode. 3. How to use as a Bluetooth Transmitter (TX) 3.1 Bluetooth Pairing and Connection AOff mode, switch the button to TX side and long press MFB 2 seconds to power on. BDouble press MFB button to enter into pairing mode with Blue LED flash. CTurn on the Bluetooth function of your device (Bluetooth Headphone, Speaker or receiver etc.) to pairing mode with Red & Blue LED flash alternately or Blue LED flash. DBluetooth connect BTI-041 with your device for about 5-30 seconds, LED turns to low Blue LED flash after connected. EConnect BTI-041 and your phone with 3.5 mm audio cable, and could play music from your phone to the headphone or speaker. 1Off mode, turn to TX switch. 2Long press MFB 2 seconds to power on , and double press MFB button to enter into pairing mode with Blue LED flash. Turn on the Bluetooth function of headphone or speaker to enter into pairing mode. 3Bluetooth connect BTI-041 with headphone or speaker about 5-30 second , LED turns to low Blue LED flash after connected. 4Insert the audio cable, RCA cable or fiber optic cable to select the connection mode. Notes:
Blue LED flash in different way depend on different CODEC (of connected device) after connected, refer to point 6 LED indicator. 3.2 Multi Point Connection AFollow 3.1 to connect with the first device, double press MFB button to enter into pairing mode again with Blue LED flash. BTurn on the Bluetooth function of the second device (Bluetooth headphone, speaker or receiver etc) to enter into pairing mode, then Bluetooth connect BTI-041 with the second device in 5-30 seconds. BTI-041 solid Green LED after connected with two devices. Notes 1. Pls turn off BTI-041 and turn on again, and try to reconnect or repair with two devices, when it could not connected with two devices at the first time. 2. Multi point connections could compatible with most Bluetooth devices of market. 3. Single connection priority support aptX HD (connected device also need to support aptX HD). the other connection methods by aptX low latency, aptX or SBC also will be according to the device setting of the priority support. 4. It is normal for solid Green LED (Multi point connection ) to cover the LED indicator in other status. 3.3 TV Connection Connect BTI-041 and the TV with 3.5mm audio cableRCA cable or fiber optic cable, and Bluetooth connect BTI-041 with devices ( Bluetooth headphone or speaker ), and could transmit the audio from TV to the devices . Notes 1. Pls test the TV with wired headphone by selecting 3.5mm output or RCA sound device insert into RCA audio port to check the TV's audio settings to make sure the devices connect in the right way and play audio from the TV. 2. Pls connect the TV and SPDIF IN port with fiber optic cable when select the Toslink connection mode. 4. How to use as a Bluetooth Receiver (RX) 4.1 Bluetooth Pairing and Connection AOff mode, switch the button to RX side and long press MFB 2 seconds to power on. BDouble press MFB button to enter into pairing mode with Red & Blue LED flash alternately. C. Turn on Bluetooth function of Phone, search and click to connect BTI-041 on Bluetooth device lists. D. LED turns to solid Blue after connected, connect BTI-041 and headphone or speaker with 3.5mm audio cable, play music from phone to the headphone or speaker. 1. Off mode , switch the button to RX side . 2. Long press MFB 2 seconds to power on , and short press pairing button to enter into pairing mode with Red & Blue LED flash alternately. 3. Turn on Bluetooth function of phone (PC, laptop), search and click to connect BTI-
041. 4. Insert the 3.5mm audio cable or fiber optic cable to select the AUX or SPDIF connection mode. Notes:
Blue LED flash in different way depend on different CODEC after connected, refer to point 6 LED indicator 4.2 Multi Point Connection AFollow 4.1 to connected with first phone (PC, laptop). B. Double press BTI-041 MFB button to enter into pairing mode again with Red &
Blue LED flash alternately. C. Turn on Bluetooth function of the second phone, search and click to connect BTI-
041 on phone Bluetooth lists. Multi point connections with solid green LED. Notes
(1) Only could play music from one phone when with two connections. 5. Single connection priority support aptX HD (connected device also need to support aptX HD). the other connection methods by aptX low latency, aptX or SBC also will be according to the device setting of the priority support.
(2) Solid Green LED will cover other color LEDs after two connections. 4.3 Speaker Connection Connect BTI-041and Speaker with 3.5 mm audio cable, and Bluetooth connect with phone (PC, laptop), play music from your phone to speaker. Notes 1.Pls test the speaker with 3.5 mm audio cable (connect phone) to see if workable, if could not play when connect with BTI-041. 2. Pls insert to SPDIF OUT port for Toslink connection. 5. Charging Pls charging BTI-041 when low battery with Red LED flash. LED turn off when full charged (about 2 hours ). Connection for charge Connect BTI-041 and power supply (charger , car charger , computer USB etc )with Micro USB cable. Charging with Micro USB / Charging with PC Notes:
1. Pls charge the BTI-041 at least once every 2 months if without use. 2. Pls press MFB and connect with power supply to reset the item , when it dead during use. 6. LED Indicator Status Power on Power off Pairing mode LED Indicator Blue LED flash twice Red LED flash twice Blue LED flashTX mode Unconnected standby mode Red & Blue LED flash alternatelyRX mode Blue LED flash once every second (TX mode ) Blue LED flash twice every second (RX mode ) Connected standby mode Solid Blue LED aptX HD Blue LED flash 4 times every 10 seconds aptX low latency Blue LED flash triple every 10 seconds Connected working mode (CODEC) aptX AAC SBC Low battery Charging Full charged Blue LED flash twice every 10 seconds Blue LED flash once every 10 seconds Blue LED flash once every 10 seconds Red LED flash Solid Red LED Red LED turn off 7. Product Specification Bluetooth Version Chipset Solution Operation Range Bluetooth Profile CODEC Battery Capacity Charging Time Standby Time Working Time Operating Temperature Net Weight Size V5.0 CSR 8675 Class 100 meters A2DPAVRCP RXaptX HDaptX low latencyaptX AACSBC TXaptX HDaptX low latencyaptX SBC 600mAh/3.7V About 2 hours RX modeAbout 175 hours AUX SPDIF RX TX RX TX About 15 hours About 5 hours About 17 hours About 17 hours
-10---55 About 112 g 85.2*80.8*23.1mm Notes:
1. Working time will be different depend on different working environment and CODEC. 2. Standby time will be same as working time on TX mode, as it will be working once connected. 3. CODEC code depend on the connected devices and follow the turns as mention. 8. Attention and Q & A QPower off automatically?
A: Without connect with any devices for more than 10 minutes the item will power off automatically in RX mode, except in TX mode. QHow to reconnect?
A: BTI-041 will reconnect with paired devices when power on. If not , pls follow the 3.1 or 4.1 to pair & connect again. Q . How to delete the paired records?
A: Switch to another mode TX or RXand power on, will delete the paired records of the last mode. (Pls switch to another mode after 3 seconds from power off in last mode.) Q . Password for connect?
A: Pls enter 0000 (four zero), 8888 (four eight), 1111 (four one), or 1234 (one, two, three, four) for some devices which need password to connect . Q. Could not power on or dead when connect?
A: Press MFB and connect with power supply to reset the item, and repower for use. Q. Charging power supply?
A: Charging power supply: 5V, 500 mA. (Charger, car charger , computer USB etc.) ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforanuncontrolled environment.Thisequipmentshouldbeinstalledandoperatedwithminimumdistance20cm betweentheradiatorandyourbody.Thistransmittermustnotbecolocatedoroperatingin conjunctionwithanyotherantennaortransmitter. FCC Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.