FCC ID: N9KSMARTPGD628F Electronic lock with BLE & fingerprint

REV0.1 ERPPL3562Q-GL-SMT00010A-V1

::PL3562Q/PGD628SMT000,REV.A,211.3x211.3mm,80g, 2C1836PGD628|PGD628FRoHS2.0,REACH,Prop65POPsPAHs ERP P/N C M C K Designed Date2018-07-14 PGD628 | PGD628F LATCH EDITION Lockly Smart Lock - Secure Plus (PGD628) Lockly Smart Lock - Secure Pro (PGD628F) U.S. Patent No. 9,665,706 Other Patents Pending With All Rights Reserved About Lockly Secure Plus and Secure Pro Lockly Secure Plus and Secure Pro are keyless smartlocks equipped with the patented PIN Genie, which is a peep proof and hidden camera proof algorithm software. Lockly makes your life easier and safer. For digital versions and instructional videos, please visit the folowing link:

SECURE PLUS | SECURE PRO http://support.lockly.com USERS MANUAL Table of Contents 1.1 Product Features 2.1 Product Overview - Outside 2.2 Product Overview - Inside Section 1 - Product Highlights 1.1 Product Features Section 2 - Product Overview 2.1 Product Overview - Outside 2.2 Product Overview - Inside 2.3 Understanding Your New Lock 2.4 Factory Reset 2.5 Keypad Display Switch 2.6 Rebooting Lockly Secure 2.7 Low Battery 2.8 Changing The Battery Section 3 - Using Your Smart Lock 3.1 Configuring Access 3.2 Programming Mode 3.3 Adding an Access Code 3.4 Deleting an Access Code 3.5 Checking an Access Code 3.6 Adding a Fingerprint 3.7 Fingerprint Scanning Directions 3.8 Fingerprint Tips & Troubleshooting 3.9 Deleting Stored Fingerprints 1 2 3 4 5 5 6 7 8 9 10 11 13 15 16 19 21 22 Section 4 - Locking and Unlocking 4.1 Locking / Unlocking using Access Codes 4.2 Locking / Unlocking using Fingerprint 4.3 Locking / Unlocking using App 4.4 Safe Mode - Overview 4.5 Disabling Safe Mode Section 5 - Advanced Features (OMK) 5.1 OMK - Offline Magic Key Section 6 - Important Notes 6.1 Important Notes Section 7 - Cleaning 7.1 Cleaning Section 8 - Safety Precautions 8.1 Safety Precautions 23 24 25 26 27 29 30 31 32 For additional support, visit http://support.lockly.com or email help@lockly.com Patented Anti-Peep Keypad Digits are randomly displayed on the key pad ensuring access codes to be undetectable to intruders after repeated use. To experience the patented and innovative key pad software, powered by PIN Genie, please download the PIN Genie Vault App from iOS App Store or Google Play. Multiple Access Codes & Monitoring Store up to 8 Access Codes for family, friends, and guests, as well as monitor entry and exit records. Advanced 3D Fingerprint Recognition (Secure Pro Only) Biometric Fingerprint Recognition protocol allows up to 99 registered fingerprints to be used and accepts only actual fingerprints - preventing lifted prints from being used. Complete Privacy The exterior displayed keypad can be locked and switched off using the simple ON/OFF toggle from the inside panel. The owner can prevent others trying to input the passcode from the outside and entering the home OMK (Offline Magic Key) The offline magic key can allow owners to issue access codes, set the allowed access duration, all without Lockly ever connecting to the internet, so in case of power outage, you can still magically and remotely issue Access Codes without any connection to the web. Automatic Lock Owners no longer have to worry about forgetting to lock the door. With Auto Lock enabled, Lockly Secure Plus and Secure Pro will automatically re-lock the door after 5 seconds. Backup Keys and 9V Battery Socket The door can be opened with physical backup keys. There is also a 9V battery connection socket for emergency power backup to access the key pad in case your smart lock runs out of battery. Touchscreen Keypad Buttons Fingerprint Sensor Exterior Handle Key Hole Cover Key Hole 9V Battery Backup Socket Battery Compartment 4 x AA Alkaline Batteries

(Included) Battery Compartment Cover Keypad Display Switch Interior Handle Reset Button Program Button Low Battery Indicator TABLE OF CONTENTS SECTION 1.1 1 2 SECTION 2.1 SECTION 2.2 2.3 Understanding Your New Lock 2.4 Factory Reset 2.6 Rebooting Lockly Secure NOTICE The Default Access Code is 1 2 3 4 5 6 After the installation of your new Lockly Secure Plus / Pro, understanding some key functions of operating your smart lock is important. The following guides will walk you through resetting a lock, adding Access Codes, deleting Access Codes, adding and deleting fingerprints

(applicable to Secure Pro only) and also how to configure your OMK (Offline Magic Key). For any questions you can always visit http://support.lockly.com for assistance. Dont forget that the Secure Plus and Secure Pro works best with our iOS and Android app. Please download the app by visiting the link below. Scan or visit Lockly.com/app In order to restore the Lockly Secure to factory default settings, you must have your Initial Code available. The Initial Code can be found on the VIP Card that came with your smart lock. After you have the Initial Code ready, push the reset button on the back panel of the Lockly Secure to perform your reset. See below to see which Reset Process applies for you. Once the smart lock has been reset, all the data previously stored will be deleted. Reset Button If Paired with App If Never Paired Press Reset Button for one (1) second Press Reset Button for three (3) seconds Open the Lockly smartphone app to add your lock using the Initial Code 2.5 Keypad Display Switch The exterior keypad screen can be locked and turned off by using the ON/OFF switch at the back panel (interior) of the smart lock. When it is switched off, people who are outside cannot enter any access codes to unlock the door. NOTICE Reboot Lockly in case of dead battery or malfunction. No settings will be changed and all Access Codes will still be stored within Lockly. Press and release the reboot button when you want to reboot the lock. Your Lockly will beep once after reboot. Only reboot when necessary. To reboot, find the reboot button located on the bottom of the exterior side of Lockly Secure. The reboot button is located in the middle of the two 9V battery backup sockets. You will need something small such as a paperclip, to press the reboot button. Insert the paper clip and press down firmly. 2.7 Low Battery When the battery is in seriously low condition, Lockly Secure will make continuous beeping sounds in addition to the flashing low battery icon on the touch screen. You should replace batteries immediately to avoid your smart lock from shutting down. Condition Indicator Solution Low Battery Battery Icon on the display keypad will light up to indicate low battery. Dead Battery When there is no display and sounds;

and screen is non-functional. Reboot Button

-

+

9V Battery SECTION 2.3 SECTION 2.4 5 6 SECTION 2.6 SECTION 2.7 2.8 Changing The Battery 3.1 Configuring Access 3.2 Entering Programming Mode 3.3 Adding an Access Code Under normal use, the Lockly Secures battery will last up to a year. Please check battery levels regularly and change your batteries when the low battery notification is issued. For best practice, always use new batteries. Open the battery compartment cover and insert four (4) new AA alkaline batteries as shown. 1 2 3 AA 1.5V X 4

+ -

-

+

+

-

+-

NOTICE The Default Access Code is 1 2 3 4 5 6 Your new Lockly Access Code can be any combination of 6 to 8 digits. Once a new Access Code is entered, the Default Access Code of 123456 would be deleted. A Maximum of 10 sets of Access Codes can be stored for use. To enter Programming Mode, remove the battery compartment cover on the interior side of the Secure to expose the Reset and Program buttons. Program Button Simply press the Program button to enter programming mode. Note: Program button will be disabled once synced to a smart phone. Config-

ure all settings via synced smart phone.

- Make sure the batteries are oriented correctly.

- Replacing the batteries do not reset stored Access Codes.

- To avoid having to reset the unit and Access Codes, insert new batteries within 15 minutes of removing old batteries. OK Button How to Use the Keypad There are a total of five (5) buttons on the keypad as shown in the example image to the left. The numbers in each button may differ than what is shown on your device than what is displayed here. To enter your required digit, just simply press the circle where your number is shown. You do not need to press the actual number as anywhere within the circle will suffice. The button on the bottom is the OK button. You will be pressing this button when you are done entering your Access Code. To end Programming Mode, press the Program button anytime. Programming Mode will automatically exit if the keypad is inactive for more than thirty

(30) seconds. Number Mode Add Access Code Delete Access Code View Access Code After entering Programming Mode, you should see the screen as displayed to the right on your Lockly keypad. Follow the following steps to add, delete, or check your Access Codes. Enter your new 6 - 8 digit Access Code and press when you are finished. You will then re-enter the code to confirm your new Access Code. Remember, just touch the digit you need within the circle around each 3 numbers. There is no need to touch the exact location of the number. For example, based on the example image to the left, if you need 1, you can touch the upper left button or the lower right button. For 6, you would touch the upper right button. 3 7 Replace batteries immediately to avoid battery failure. Lockly Secure can still operate up to 300 cycles in low battery condition. Replace batteries immediately. Supplied physical backup keys can be used to unlock the door. Alternatively, use a 9V battery as shown below to temporarily activate the lock. Your Lockly Secure will automatically detect the battery polarity, so just hold and place your 9V battery leads in place against bottom of the Lockly Secure to temporarily activate the screen to enter your Access Code. Be sure to hold the 9V battery against the contact points located at the bottom of the lock until you have successfully unlocked your door with your Access Code. Once unlocked, batteries should be replaced immediately. While in Programming Mode, select 1AD to add an Access Code. If you are not in Pro-

gramming Mode, please see Section 3.2 to enter Program-

ming Mode. After pressing 1AD press Pd to add an Access Code. SECTION 2.8 SECTION 3.1 9 10 SECTION 3.2 SECTION 3.3 11 3.3 Adding an Access Code (Continued) 3.4 Deleting an Access Code 3.4 Deleting an Access Code (Continued) 3.5 Checking the Access Codes If you have successfully entered your new Access Code twice, you will see the new code displayed here. In this exam-

ple, we chose 654321. Press to Confirm or to cancel. To exit or cancel, you can always press or If the two (2) Access Codes you entered does not match, an error message will appear on the screen (As shown to the left). Press OK to return to the Programming Screen and try again. See Section 3.3 Example Only While in Programming Mode, select 2DE to delete an Access Code. If you are not in Programming Mode, please see Section 3.2 to enter Pro-

gramming Mode. After pressing 2DE press Pd to delete an Access Code. Active Access Codes will then be displayed on the screen in sequence from left to right, top to bottom. In the exam-

ple shown on the left, the Access Code displayed is 1 3 5 7 9 0 . Rotate through different Access Codes shown by touching any number on the screen. If you find the Access Code you want to delete, simply hold the OK button for 2 sec-

onds. (Continue on next page) Once you have selected the Access Code you want to delete, Lockly will ask you to confirm deletion by showing you the Access Code you are deleting, in this example, 1 3 5 7 9 0. Press to delete, or to cancel. There are two incidents where your Access Code cannot be deleted. NOTE There are no Access Codes set. The factory default Access Code cannot be deleted. There is only one (1) Access Code saved in the smart lock. At least one code must be registered. Please add another Access Code before attempting to delete the existing code. While in Programming Mode, select 3CH to check registered Access Codes. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. Active Access Codes will then be displayed on the screen in sequence from left to right, top to bottom. In the example shown on the left, the Access Code displayed is 1 3 5 7 9 0 . OK Button Rotate through the different Access Codes by touching any number on the screen. To exit Check Access Code screen, simply press the OK button. If there are no Access Codes registered in your smart lock, Check Access Code mode will be invalid. The default Access Code will not be shown on the display keypad, and you will see the following screen shown to the left instead. OK Button OK Button No Access Codes Set Only one Active Access Code 12 SECTION 3.3 SECTION 3.4 13 14 SECTION 3.4 SECTION 3.5 15 3.6 Adding a Fingerprint (Secure Pro Only) 3.6 Adding a Fingerprint (Continued) 3.6 Adding a Fingerprint (Continued) 3.7 Fingerprint Scanning Directions In this section, you will learn how to register a fingerprint to your new smart lock. Fingerprint registration is only available in the Lockly Secure Pro, and not available in Secure and Secure Plus models. If you have Secure Plus, you may skip to Section 4.1 to learn about locking and unlocking your door with Lockly. We are using an advanced biometric sensor, providing the most secure fingerprint authentication. For security reasons, Lockly will only accept fingerprint patterns that consist of cross intersection points. Patterns with no cross intersection points will not be acceptable. Please check your fingers before registration to make sure the finger you want to register will be acceptable by our system. Otherwise, use an alternative finger to ensure successful registration. The following examples show which types of fingerprint patterns will be acceptable. It is highly recommended to enroll at least one finger from each hand in case the hand you are using is unavailable, such as, in instances like if you are holding items in that hand or have sustained an injury. Fingerprint Pattern with Cross Intersection Lines Concentric or Parallel Pattern with no Cross Intersection Lines Fingerprint with Scars or Worn Out Ridges OK Not OK Not OK The Secure Pro can register up to ninety-nine (99) fingerprints. Please read the following sec-

tions if you want to add or delete fingerprints. While in Programming Mode, select 1AD to add an Access Code. If you are not in Pro-

gramming Mode, please see Section 3.2 to enter Program-

ming Mode. After pressing 1AD press FP to register a Fingerprint. Upon pressing FP, you will enter Fingerprint Registration Mode and you will see a green LED ring light up on the fingerprint panel on the exterior side of Lockly Secure Pro. Once youre in Fingerprint Registration Mode you will see two numbers displayed on keypad. The top number is your Fingerprint Registration number, in this example to the left, 1. The bottom number will always start with a 6. You must successfully scan your fingerprint six (6) times for it to properly register. Every time you scan your fingerprint, the number on the bottom will change, starting from 6 - then 5, 4, 3, 2, 1, until the fingerprint is successfully registered. Note: For reference, please keep a record of your fingerprint registration number to distinguish whom it was registered to. NOTICE Please make sure your fingers are clean from dirt and oils before scanning your fingerprint. Make sure the sensor is also clean by taking a soft cloth and wiping the surface. The fingerprint sensor equipped in Lockly Secure Pro is loaded with powerful fingerprint algorithms to extract quality features from fingers, even in poor conditions. Placing your finger on the sensor correctly helps consistency in fingerprint recognition. The following directions and tips will guide you on how to scan an optimal fingerprint image. Scan your finger by lightly placing your designated finger on the sensor until you hear a beep. Lift your finger and repeat the process slowly until the digit 6 shown on the screen becomes 1. If you have successfully scanned and registered your fingerprint, you will hear a long beep, and the Bluetooth icon will flash green. PASS will show on the keypad and press OK to exit. If you did not successfully register your fingerprint, FAIL will show on the keypad. If FAIL is displayed, press OK to return to the previous screen to rescan your finger. For instructions on scanning an optimal fingerprint, please proceed to Section 3.7. Sensor Core Position your finger on the center of the sensor 16 SECTION 3.6 SECTION 3.6 17 18 SECTION 3.6 SECTION 3.7 19 OK Button 3.7 Fingerprint Scanning Directions (Continued) 3.8 Fingerprint Scanning Tips & Troubleshoot 3.9 Deleting Stored Fingerprints 4.1 Locking/Unlocking Lockly with Access Codes OK OK Top View Side View Correct Incorrect Tips for Fingerprint Enrollment and Recognition Place your finger to completely cover the sensor with maximum contact surface. Position the center of your finger (core) to the center of the sensor. Hold your finger still for more than a second until you hear a beep. Scan a finger that is clean and free from dirt. If a finger is cracked and dry, lightly moisten the finger to improve recognition. Children ages 12 and under are not recommended to use fingerprint access due to the constant changes of their fingers during growth. Elderly with fading fingerprints may have difficulty in recognition. If your finger has a cut, scar, or cracked skin due to dryness, try another finger. Troubleshooting Fingerprints In case of poor fingerprint conditions If wet - wipe excess moisure from finger before scanning If dry - moisturize or blow warm breath over finger before scanning If dirty - wipe stains and dirt off from finger before scanning Make sure the sensor is clean from dirt or smudges - wipe sensor with soft cloth regularly For more troubleshooting help, visit http://support.lockly.com While in Programming Mode, select 2DE to delete a Finger-

print. If you are not in Program-

ming Mode, please see Section 3.2 to enter Programming Mode. After pressing 2DE to delete, press FP to delete a fingerprint. Your registered fingerprint numbers will be displayed on the screen. Tap number to rotate to the next registered fingerprint. When you have found the fingerprint ID you want to delete, press and hold the OK button for 2 seconds to delete. (Example shown - 02) You will then see a confirmation page displaying and with the fingerprint number you are deleting displayed in the lower left. Select Y to delete or N to cancel. Lockly Secure series can be unlocked using 1 of 4 ways - via your stored Access Code, registered fingerprint (Secure Pro only), smartphone with Bluetooth, or with the physical key supplied with your lock. Slide your hand across the screen to activate the keypad. Enter your 6 to 8 digit Access Code followed by the OK button. Press OK anytime to reset if you entered the wrong digit. If the Access Code entered is correct, the door will unlock. If the Access Code entered is incorrect, Lockly will beep twice. OK Button Three consecutive wrong attempts will put Lockly in Safe Mode. (See Section 4.5) Lock your Lockly Secure by pressing the OK Button anytime when the door is closed. Lockly Secure will also auto-lock after five (5) seconds after unlocking and opening. PIN Genie Fixed Digit You may toggle between two types of keypad displays to enter your Access Code. The fixed digit version and the PIN Genie version (Recommended). Press and hold the OK Button for 3 seconds to toggle back and forth between the two keypads. Hold OK Button (3 sec) OK Button Fingerprint ID Number SECTION 3.7 SECTION 3.8 21 22 SECTION 3.9 SECTION 4.1 23 4.2 Locking/Unlocking Lockly with Fingerprints 4.3 Locking/Unlocking Lockly with App 4.4 Locking/Unlocking Lockly with Physical Key 4.5 Safe Mode - Overview You must have the Lockly iOS or Android app installed in order to lock and unlock with the smartphone app. Please first download the app from the correct store. Scan or visit Lockly.com/app Please see the smartphone app manual to follow instructions on how to connect your app to your lock via Bluetooth and learn how to lock / unlock the door using the app. Unlocking Place a registered finger to the fingerprint scanner located on the exterior side of the lock to the right. To register a fingerprint, please see Section 3.6. If your fingerprint is registered and acknowl-

edged, you will hear a beep sound and a Green LED will light up on the fingerprint scanner. You can then push down the handle and open the door. If you see a Red LED, it means your fingerprint is not recognized. You must wait until the red LED is off to try again. For best fingerprint scanning practices, see Section 3.7. Locking To lock the Lockly Secure, press the OK Button anytime when the door is opened. OK Button Lockly will enter Safe Mode when three (3) consecutive wrong Access Codes are entered within 5 minutes. When in Safe Mode, the lock status icon will start to flash. To disable Safe Mode, you must unlock the door using the correct fingerprint (Secure Pro) or enter the correct Access Code twice in a row. Activate the keypad by pressing and holding for 3 seconds. Once the screen is activated, enter the correct Access Code carefully twice, pressing after every time. If you enter the wrong code, the keypad will then be disabled for 10 minutes. Exterior View 4.5 Disabling Safe Mode There are three (3) ways to disable Safe Mode. Option 1 - Entering Correct Access Code Enter the correct Access Code twice (2) when the keypad is available, pressing after every time the Access Code is entered. Option 2 - Lockly Bluetooth App Use the app that is synced to your Lockly to disable Safe Mode by unlocking the door. If you have not downloaded the app to use with your smart lock, you wont be able to use this option to disable Safe Mode. Option 3 - Screen ON/OFF Switch Countdown Prompt

(Displayed in Minutes) Will start with 10 and countdown until 0. Example A Example B The Safe Mode can be switched off using the screen on/off switch at the back on your lock. To unlock your Lockly using the physical key (supplied), open the key cover on the handle by turning the cover counter clockwise 90 degrees to reveal the keyhole. Insert your key and turn clockwise or counter clockwise to lock or unlock the door. You will see a 10 on the screen, notifying the number of minutes that the keypad is disabled for. After 10 minutes, you may attempt to enter the correct Access Code to unlock the door. After the second incorrect attempt to unlock the lock with the wrong Access Code, Lockly will disable the keypad for 20 minutes, displaying a 20 on the screen. After the third wrong attempt to unlock the door with the correct Access Code, the screen will be disabled for 30 minutes. (Example A and Example B above). Note: In order to conserve power, the countdown prompt will only be displayed for 3 seconds. You can reactivate the screen by sliding your hand across the screen. While in Safe Mode, the keypad will not be lit up when you are using your Physical Key. SECTION 4.2 SECTION 4.3 25 26 SECTION 4.4 SECTION 4.5 27 28 SECTION 4.5 5.1 OMK - Offline Magic Key The Offline Magic Key (OMK) is a unique feature to the Plus and Pro Series. It allows you to grant access to guests remotely without guests needing to download the app. To use the OMK feature, make sure you download the Lockly app for iOS or Android first, and sync your smart lock to your mobile device. From there, you can then issue an Offline Magic Key within the app. Go to Access Management and choose Add a New Offline Magic Key (OMK) and follow on screen instructions to generate your Offline Magic Key. Understanding OMK Codes Each lock can issue up to 50 OMK Access Codes before you have to reset and reissue another set of 50 codes. Your app will generate some to follow directions automatically for your guests to use. OMK Codes are issued to the guest by asking them to enter a 6 digit number, followed by a 4 digit number, followed again by a 4 digit number, entering in between every set of numbers. See the following example. Sample OMK Codes 234567+0987 0987 Guests Access Codes OMK Configuration Number Once a sequence like the one above is entered, it automatically activates an OMK Access Code to be used for a specific duration of time. In the example above, the Guests Access Code will be 234567 to unlock the door. 0987 is the Configuration Number that sets the total duration of the Access Code, whether its a 1 time use code, 1 hour duration code, or 30 Days. 6.1 Important Notes Auto Lock Feature Lockly Secure is programmed to auto-lock after five (5) seconds of opening the door. You can always manually lock by pressing the button anytime located on the bottom of the keypad. 9V Backup Access When your Lockly Secure is out of power, you can temporarily activate the key pad by using a 9V battery against the bottom of the exterior side of the smart lock. Please see Section 2.6 for more info. Physical Keys Even though you have your fingerprints registered (Secure Pro only) and Access Codes stored, its always best practice to carry your physical keys with you at all times in case for any reason, Lockly falls into Safe Mode. Initial Code / VIP Card You may find a VIP Card with an Initial Code included in your package. It is very crucial that you do not lose this card. Please store this card safely as you will need the default Initial Code on that card to master reset your lock in case, for any reason, you have lost the phone paired to Lockly and also forgot your Access Code. 7.1 Cleaning 8.1 Safety Precautions Making sure your Lockly is clean is best practice to ensure optimal product use. Follow the DOs and DONTs below. Please read all instructions carefully. Remind all Lockly users of the safety precautions. DO DONT Rinse the touchscreen with warm water prior to cleaning. Use the application of soap with a damp, lukewarm cloth. Airdry or wipe dry with a soft microfiber cloth to avoid scratches. Dont use abrasives, high alkaline cleaners, or gasoline to clean your lock. Dont apply cleaning detergent directly in sunlight or at high tem-

peratures. Dont leave cleaning detergent on the display keypad for long periods of time - wash immediately. Dont use scrapers, squeegees, or razors. Read the following instructions for your own safety Do not attempt to disassemble the smart lock by yourself. It can cause product damage, void warranty, and cause injuries. Do not use any inappropriate tools that can cause damages or malfunction to your lock. Always make sure your door is securely closed and locked when you leave your house to prevent unwanted entry. Please keep your Access Codes safe. Restrict access to the back panel of your smart lock and check your settings regularly to ensure Access Codes have not been changed without your knowledge. Always dispose of used batteries according to your local laws. DO NOT BURN. Unauthorized changes and modifications may void your product warranty. If you have questions or any problems while using your Lockly Secure Smart Lock, contact our customer service department at help@lockly.com or visit http://support.lockly.com for technical assistance. Certified Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. SECTION 5.1 29 30 SECTION 6.1 SECTION 7.1 31 32 SECTION 8.1 SECTION 8.1 33 4 8 20 24