REV0.3 PL3502Q-US-SMT00010A-V1 ERP P/N:
PL3502Q/PGD728SMT000,REV.B145x210mm80g Model No. PGD718/PGD728RoHS2.0REACHProp65POPsPAHs 186c Y Designer Date:2017-09-22 PIN Genie Smart Lock User Manual Thank you for choosing our PIN Genie product. Please read this manual carefully to ensure the Smart Lock is used safely and reliably. You should keep it for future reference and maintenance. Model No. PGD718 / PGD728 U.S. Patent No. 9,665,706 V.092017 About PIN Genie Smart Lock PGD718 Essential / PGD728 PRO ( Bluetooth Version) PGD 718 / PGD728 Smart Lock is keyless and equipped with the patented innovative PIN Genie Pad, which is peep proof and hidden camera proof. It is with a high security level that even when people watch you entering your PIN, they will not be able to know it. PIN Genie Smart Lock makes your life safer and better. Patented Anti-Peep PIN Pad Random digits shown on the Pin Genie display keypad ensure passcodes won't be detectable to intruders after repeated use. Intruder prevention PGD718 / PGD728 smart lock has a built-in audible alarm mode that alerts you for any intrusion into your house. With the alarm mode on, our lock reacts against any external physical shock and vibration. The owner can immediately be notified with the intrusion. Do not Disturb The exterior display keypad can be locked and turned off using the tailor-made design ON/OFF toggle button from inside. The owner can pre-
vent others trying to input the passcode from outside and go into the house. Automatic lock No longer have to worry about forgetting to lock the door. With Auto Lock enabled, PGD718 /PGD728 can automatically relock the door 30 seconds after unlocking. With mechanical key and 9V battery socket as backup The door can be opened via the mechanical keys. There is also 9V battery connection socket for the users to use the 9V battery for power supply if the lock battery is running out. Contents Section 1 Installation Instruction 1.1 Installation overview 1.2 Assembly parts 1.3 Prepare door and check dimensions 1.4 Adjust the backset of latch 1.5 Extend the bolt 1.6 Install latch 1.7 Prepare exterior assembly 1.8 Install exterior assembly 1.9 Install interior assembly 1.10 Install batteries 1.11 Install strike 1.12 Install battery cover Section 2 Introduction of the smart lock 2.1 Components 2.2 Setting switch 2.3 Reset 2.4 Display keypad switch 2.5 Restart 2.6 PIN GENIE button 2.7 Changing the battery R Section 3 Programming Passcode 3.1 Passcode information 3.2 How to enter settings 3.3 Add Passcode 3.4 Delete Passcode 3.5 Check Passcode ( On Model PGD718) / Bluetooth Switch ( On Model PGD728) 3.6 Alarm Sensitivity Section 4 Locking and unlocking the door 4.1 Unlock from outdoor 4.1.1 Safe mode 4.2 Unlock & Lock from indoor 4.3 Lock from outdoor Section 5 Safety Precautions 01 1 1 2 2 3 3 3 4 5 6 6 6 07 7 8 9 9 10 10 10 11 11 12 12 13 14 15 17 17 17 19 19 19 F D B Section 1 Installation Instruction 1.1 Installation overview J M H1 H2 H I N Q P P O 1.2 Assembly parts O Q R A C B A C H1 H2 I M N P 1 D F G J K 1.3 Prepare door and check dimensions If drilling a new door, please use the template supplied. 2-3/8"(60mm) Or 2-3/4"(70mm) 1"
25mm 1-3/8"2" (35mm50mm) 1.4 Adjust the backset of latch Hold the latch in front of the drilled hole as shown below. 1/2"
12mm
* Drill hole 3-109/127"(98mm) 2-1/8"
54mm
* Drill hole If the latch holes are centered in the drilled hole, no adjustment is needed. If NOT, adjust the latch. Adjust as shown below (only if needed) 2-3/4"
2-3/8"
2-3/4"
c b a 1 2 Initial position of c: 2-3/8"
Push toggle button a downwards and pull part b outwards. 3 Pull c to 2-3/4" and release button a . Now the backset has been adjusted to 2-3/4". 2 1.5 Extend the bolt 1.6 Install latch Extend the latch bolt as shown. O P(2X) Pay attention to the direction of the latch. O 1.7 Prepare exterior assembly 1 Vertical When the bolt is extended, the torque blade should be kept in a vertical position. Take out the screw which is being used for fixing the cylinder during transit and discard it. You can attach this fixed column (optional) to the lock body. It is recommended to have it for the lock's fixity. B D C 3 2 Install D & C on B in order as shown. 1.8 Install exterior assembly 1 2 F When the bolt is extended, the torque blade should be kept in a vertical position. G B Note: Please use the physical key to rotate the torque blade in vertical position and then pull out the key. Cable goes underneath the latch 3 4 H1 H2 H I(2X) Center hole Side hole Route cable through center hole, then push it into side hole. Keep parallel 5 Please use the H1 screw for the door thickness 35-43mm. Or use the H2 screw for the door thickness 43-50mm. H I(2X) A Before screwing, check the vertical align-
ment for the mounting plate and exterior assembly. After installation, use back-up key to test the latch. If the latch does not retract or extend smoothly, adjust screws. 4 1.9 Install interior assembly Open the battery compartment by unscrewing the screw and remove the cover. Note: Do not install batteries yet!
Make sure thumbturn is in the vertical position. 1 3 2 4 J Connect the cable. Pay attention to the direction and ensure tight cable connection. Fix the interior assembly with screws provided. torque blade thumbturn shaft 5 Push the thumbturn shaft onto the torque blade. M N 1.10 Install batteries 1.11 Install strike Install 4 new AA batteries. Make sure batteries are correctly oriented.
+
-
-
+
+ -
-
+
Before installing the last battery, press and hold Program button until you finish, then you will hear a long beep. Once you release the button, the latch will automati-
cally do a self-check and the display keypad will play boot animation. P(2X) Q R 1.12 Install battery cover K Tighten the screw. Note: Program passcode before installing battery cover. See Section 3. 6 Section 2 Introduction of the smart lock 2.1 Components Back (Main Body Front (Front Body Battery Compartment Cover Battery compartment OK Button Lock Status icon Power Status Bluetooth light-PGD728 Bluetooth icon-PGD728 Key Hole Key Hole Cover Thumbturn Display Keypad Switch Setting Switch Reset Button Program Button Siren PIN GENIE Button Restart Button Back-up Battery Socket Note: When Model728 APP is enabled, the RESET, PROG will be disabled and controlled by APP. 7 Specifications Certifications Color: Satin Nickel, Venetian Bronze Function: Single cylinder deadbolt Door Prep: 2 18" diameter face hole & 1" diameter latch hole Door Handing: Reversible Door Thickness: 1 38" 2" automatic adjustment Backset: Adjustable 2 38" or 2 34"
Bolt: 1" throw, steel deadbolt Latch: For 2 38" or 2 34" (steel or stainless steel) Back-up Keys: 3 keys Working environment temperature:Indoor use:
0~45COutdoor use: -25~60C FCC Certified This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful inter-
ference, and
(2) This device must accept any interfer-
ence received, including interference that may cause undesired operation. 2.2 Setting switch Switch 1: Auto Lock (Default: ON) With Auto Lock enabled, the smart lock will automatically relock the door 30s after unlocking. Switch 2: Alarm Mode (Default: ON) With Alarm Mode on, the door reacts against external activity according to the sensitivity level that has been set. Switch 3: Audio (Default: ON) Enables the Audio sound (Beeper) when in the ON position. Switch 4: PIN CRAZY (Default: OFF) With PIN CRAZY mode on, every time you input a digit while entering passcode, the display keypad will be refreshed. Setting Switch Note: Even when the Alarm mode switch is turned ON, you can manually disarm or arm the smart lock via the specified operation as shown below. Alarm mode ON Input passcode to disarm Press and hold any two circles on the screen for 1.5 second, the circles you pressed will flash and you will hear a long BEEP. OK Successfully disarm. Alarm mode OFF 8 Successfully disarm. Alarm mode OFF Press and hold any two circles on the screen for 1.5 second, the circles you pressed will flash and you will hear a long BEEP. Alarm mode ON 2.3 Reset Reset: Restore the smart lock to factory default setting. Use a stick-like object such as a clip, toothpick etc. to push the reset button at the back panel of the smart lock for about 2 seconds. After that, you will hear a beep. The display keypad will play the boot animation and the smart lock is now restored to factory default setting and all the pro-
grammed data has been deleted. Note: The default passcode is 123456. 2.4 Display keypad switch The exterior display keypad can be locked and turned off using the display keypad switch at the back panel of the smart lock. With the display keypad switch off, people outside cannot input passcode to unlock the door. Note: When you open the door from inside and leave home, the display keypad switch will be automatically ON. Display keypad blocked 9 Display keypad enabled 2.5 Reboot Reboot: Press and release the restart button. The smart lock will beep once and restart. The smart lock is ready for use again. Note: No setting will be changed. Restart Button 2.6 PIN GENIE button Status Indicator Alarm system triggered Quick flashing green and red light Low battery Slow flashing red light Alarm mode on Flashes green when you press PIN GENIE button PIN GENIE Button 2.7 Changing the battery Open the battery compartment cover and insert 4* AA batteries as shown below. Make sure the batteries are correctly oriented. Replacement of batteries does not affect programmed data. To avoid setting loss, please insert new batteries within 15 minutes. 1 2 3 AA 1.5V X 4
+
-
-
+
+ -
-
+
10 Condition Indicator Solution Batteries low Battery Icon on the display keypad outside will light up to indicate low battery . Meanwhile, the PIN GENIE button on the back will flash red for about 1 minute at the same time. Battery failure No LED or beeps.The display keypad is invalid. Replace batteries immediately to avoid battery failure. Smart lock can still be operated for approximately 300 cycles in low battery condition. Replace batteries immediately.The mechanical keys supplied can be used to unlock the door. Alternative-
ly inset a 9V back up battery as shown to activate the display keypad. _
+
9V Back-up Battery Socket Section 3 Programming Passcode 3.1 Passcode information The Passcode can be any combination of 6~8 digits. The default passcode is 123456. Once you add a new passcode, the default one would become invalid. Maximum 8 sets of passcode can be set for family use. How to use the keypad!
There are 5 touch keys on the keypad as shown on the right. To input a digit, press the circle where the number lies. 11 3.2 How to enter settings Press the Program button and the screen will be activated. The setting page is as shown below. Number Mode Add Passcode Delete Passcode Check Passcode ( On Model PGD718) Bluetooth Switch ( On Model PGD728) PROGRAM Alarm Sensitivity OK Button OK Button To end, press the Program button at any time. To finish with Settings, press the Program button again to quit. Settings will automatically shut down if inactive for more than 30 seconds. 3.3 Add Passcode 1 Press the Program button and the screen will be activated. 2 Press 1 to enter Add passcode mode. PROGRAM 3 Input a new passcode of 6~8 digits. Then press ok .For example: Input 1, input 2, input 3, input 4, input 5, input 6,then press OK . Input 1 Input 2 Input 3 Input 4 4 Input your passcode again, press OK OK Input 6 Input 5 12 If the passcode you entered twice match, 5 it will be displayed on the screen for your final confirmation. Press . Your passcode is now set. To quit, press "OK" or . If the passcode entered twice does not match, an error message will appear for a second. Return to the setting page and try again. Input Y to confirm Setting page Error message Setting page 3.4 Delete Passcode 1 Press the Program button and the screen will be activated. 2 Press 2 to enter Delete passcode mode. PROGRAM The passcode will be shown on the screen in sequence (from left to right & top to bottom. For example, the passcode shown on the screen is 1-3-5-7-9-0. Every time you touch the screen, it will display the next set of passcodes. Delete passcode mode Press any digit to switch to the next set. Press the button once to return to setting page. Hold the button down for 1 second to delete the passcode. 3 Continue pressing any digit on the screen until the passcode you want to delete is displayed. Hold the "OK" button for 1 second to enter the delete confirmation page. For example, to delete the second set passcode (1-2-3-4-5-6) 13 Hold down the OK button Press to delete. Press to end. Press to switch Confirm deletion Note: There are two situations that users could not delete passcode. If there is no passcode preset, the delete passcode mode will be invalid. The default passcode will not be shown on the display key pad. You can add a new passcode to override the default one. If there is only one set of passcode preset, the delete passcode mode will also be invalid. For example, there is only one set of passcode (1-3-5-7-9-0). When you hold down the OK button, there will be an error message. The smart lock will beep twice. No passcode preset Error message 3.5 Check Passcode ( On Model PGD718) / Bluetooth Switch ( On Model PGD728) 1 Press the Program button and the screen will be activated. 2 Press 3 to enter check passcode mode. Passcode will be shown on the screen in sequence (from left to right & up to down top to bottom). For example, the passcode s h o w n o n t h e s c r e e n i s 1-3-5-7-9-0. Every time you touch the screen, it will switch to the next set of passcode. Press any digit to switch to next set of numbers. Press once to return to setting page. Check passcode mode
( on Model PGD718) 14 3 Continue pressing any digit on the screen to check other pass-
codes. After all sets of passcode are displayed, the screen will auto-
matically return to the setting page. For example: to check the second set passcode (1-2-3-4-5-6) Press to finish Press to switch Query Result Note: If there is no passcode preset, the check passcode mode will be invalid. The default passcode will not be shown on the display key pad. No passcode preset Bluetooth Switch ( On Model PGD728) Passcode enquiry function valid only on PGD718. On PGD728, this menu is for BlueTooth ON/OFF switch through OK button. Touch OK to exit this menu. Bluetooth function can be switched On or Off what so desired by end user. Check passcode mode
( on Model PGD718) 3.6 Alarm Sensitivity 1 Press Program button and the screen will wake up. 2 Press 4 to enter Alarm Sensitivity mode. PROGRAM 15 There are three levels of sensitivity. The flashing circle represents the current sensitity level.
(Middle) Level Knock Low Open & Close the door Middle/Factory Force openHigh 3 Choose the required level and press OK . For example, to switch from Factory setting to Low. Alarm Sensitivity mode Indication Beep*2 Alarm*15seconds Alarm*3Minutes OK Press Note: If the setting switch of the Alarm Mode has been turned off, the Alarm Sensitivity Mode cannot be chosen. Press OK to return to Setting page. Alarm Mode turned off No passcode preset When the alarm system is triggered, the OK button will begin to flash. At the same time, the PIN GENIE button on the back will rapidly flash a green and red light. To deactivate the alarm, you can:
1 2 3 4 Press and hold the PIN GENIE button on the back panel for 3 seconds, or Enter the passcode, or Use mechanical keys, or Rotate the inside thumbturn. 1 Long press 2 3 4 Press OK to wake up the screen Mechanical keys Rotate thumbturn 16 Section 4 Locking and unlocking the door 4.1 Unlock from outdoor 1. Slide your hand across the screen to activate you PIN Genie Smart Lock. Enter the passcode within 1 minute. If you mistakenly enter the wrong digits, press OK to re-enter. If the passcode entered is correct, the door will be unlocked. If not, the smart lock will beep twice. Try again. IMPORTANT: 3 consecutive wrong attempts will lead to the "Safe mode" . 2. Input the Passcode and press OK (For example:1-2-3-4-5-6, under normal mode) Input 1 Input 2 Input 6 3. The PG and fix digit input mode can be toggled through pressing OK for 2 or more seconds. OK 4.1.1 Safe mode When in Enter Safe Mode , the lock status icon will start flashing. Under safe mode, you will have to enter the passcode twice to unlock the door.Each time followed by OK or simply use the mechanical key to exist the Safe mode. Steps to unlock under safe mode:
17 Press and hold O K f o r 3 s t o a c t i v a t e t h e screen OK OK Safe mode flashes Enter passcode Re-enter passcode If the correct code has been entered twice, the door will be unlocked. If not, it will lead to a 10-minute disabling period. First wrong attempt: leads to a 10-minute disabling period. After 10 minutes, it will go back to safe mode again. Repeat steps to unlock under safe mode. This time, wrong attempts will lead to a 20-minute disabling period. The countdown prompt
(minute) Second wrong attempt: leads to a 20-minute disabling period. After 20 minutes, it will go back to safe mode again. Repeat steps to unlock under safe mode. Consequently, any wrong attempts will lead to a 30-minute disabling period. Third wrong attempt: leads to a 30-minute disabling period. After 30 minutes, safe mode will automatically end. Normal Mode will resume. Users can input a passcode to unlock the door. Note: In order to save power, the countdown prompt will only be displayed for 3 seconds. If needed, slide your hand across the screen to reactivate it. Tips: The door can also be opened using the mechanical keys sup-
plied. Open the key hole cap as shown below. NOTE : When in Energy Saving Mode, the screen will not be activat-
ed by using the mechanical key or locking the door inside the house with the thumb-turn. 18 4.2 Unlock & Lock from indoor Rotate the inside thumbturn as below. 4.3 Lock from outdoor Under Auto Lock mode, the smart lock will automatically relock the door 30 seconds after unlocking. Alternatively you can press the OK button to lock the door. Automatic lock When the door is open the OK button is flashing, press the OK button to lock the door. Note: Once the latch is blocked and cannot lock the door smoothly, an alert sound will be heard, your PIN Genie Lock will auto lock your door in 30 seconds. The above steps will repeat for 3 times then stop. with the above steps and then stop. Section 5 Safety Precautions Please read this carefully for your own safety!
Read all the instructions carefully. Remind all family members of the safety precautions. Do not attempt to disassemble the unit by yourself. It can cause product damage and self-injury. Do not use an inappropriate tool that can cause damage or malfunction of the product. Make sure the Door is securely locked whenever you leave your house in order to prevent unauthorized entry. Please keep your passcode safely. Restrict access to the back panel of your smart lock and regularly check your settings to ensure passcodes have not been altered without your knowledge. Dispose of used batteries according to local laws and regulations. DO NOT BURN. Use warm water and mild dish soap to properly clean the display keypad of built-up dirt, oils, and other contaminates.Follow the general rules below:
Do rinse the touchscreen with warm water prior to the cleaning process. Do use the application of soap with a damp, lukewarm cloth Don't use abrasives, high alkaline cleaners, or gasoline Don't leave cleaning detergent on the display keypad for long periods; wash immedi-
ately. Don't apply cleaners in direct sunlight or at elevated temperatures. Don't use scrapers, squeegees or razors. To clean the bolt, you could use a mild dish soap and warm water. It may help improv-
ing the performance of the lock. 19 NOTE:
Changes or Modifications not expressly approved by the party responsible could void the user s authority to operate this device. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. USER MAME USER CODE Note ExampleJasper 1 12345678 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 20