SMART Technologies ULC 3636 Research Road NW Calgary, AB T2L 1Y1 CANADA Phone 403.245.0333 Fax 403.228.2500 info@smarttech.com www.smarttech.com Federal Communications Commission Authorization & Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 December 20, 2021 RE: Class II Permissive Change (C2PC) to an existing certification ISED# QCIIDS665P1 To Whom It May Concern:
SMART Technologies ULC is modifying RFID circuitry (Panel) to an existing certified product FCC ID#
QCIIDS665P1. However, the new model is functionally identical to the original product, and the overall system (HVIN: IDS665-3) has remained the same, except changes are only implemented in the RFID circuit of the panel. Such changes are made in effort to drive components reduction, in which we have reduced 1) the number of RFID controller boards (Kansas ISM Board), from three to two boards, and 2) the number of antenna loops in an antenna sheet, from 93 loops to 62 loops No changes have been made to a baseband PCB (Main SoC, Ethernet, HDMI, USB-C), and an existing wireless transmitter on this baseband, which has modular approval (ISED: 24728-SKIWB668BU2) has remained the same. There are no other changes in other sub-systems (such as power supply, RFID circuitry (Pen Tray FCC ID# QCIIDS665PT1), video display, and the number of connectors etc.) in this modified design, maintaining physical appearances and functions of the product the same as an existing certified product. Furthermore, we have done testing at the lab in Calgary to address the modification in RFID circuitry
(Panel), and it is found that modified design meets the Class II Permissive Change (C2PC) requirements. Supplementary information relevant to support this application is described in Family Certification Information and Modification Information letter. Yours faithfully,
. Name Title Phone Email Date
: Kaiden Hein
: Senior Regulatory Specialist
: 587-890-9488
: KaidenHein@smarttech.com
: December 20, 2021