PRODUCT MODEL (HVIN):
RL-UM02SPC-8812BU- V1.0 DESCRIPTION (PMN):
IEEE 802.11a/b/g/n/ac2T2RWLAN USB 2.0 WIFI MODEL SAFETY REGULATION:
1. shall not arbitrarily change the frequency of transmission, increase the transmission power 2. 3.
(including the installation of radio frequency power amplifier);
it is not allowed to cause harmful interference to all kinds of legal radio communication. Once it is found that there is interference, it should be stopped immediately, and measures can be taken to eliminate interference before continuing to use it;
4. must be able to resist radiation interference of various radio or industrial / scientific / medical applications;
5. may not be used near airplane or airports. NOTICE:
6. please keep this product and accessories attached to the places which children can't touch;
7. do not splash water or other liquid onto this product, otherwise it may cause damage;
8. do not put this product near the heat source or direct sunlight, otherwise it may cause deformationor malfunction;
9. please keep this product away from flammable or naked flame;
10. please do not repair this product by yourself. Only qualified personnel can be repaired. FEATURES:
11. Compatible with IEEE 802.11b standard to provide wireless 11Mbps date rate. Compatible with IEEE 802.11g standard to provide wireless 54Mbps date rate. Compatible with IEEE 802.11a standard to provide wireless 54Mbps date rate. Compatible with IEEE 802.11n standard to provide wireless 300Mbps date rate. Compatible with IEEE 802.11ac standard to provide wireless 866.7Mbps date rate. 12. Support 20MHz, 40MHz, 80MHz in 5GHz band, and 20MHz,40MHz bandwidth in 2.4GHz band 13. The modulation type are DQPSK,DBPSK and CCK with DSSS to 802.11b; QPSK,BPSK,16QAM,64QAM with OFDM to 802.11g/a/n; QPSK,BPSK,16QAM,64QAM,256QAM with OFDM to 802.11ac;
14. Operation at 2.4GHz~2483.5GHz and 5.150-~52505.250~5.350 ,5.470~5.725GHz frequency band to meet worldwide regulations. 15. Provides simple legacy and 20MHz/40MHz/80MHz co-existence mechanisms to ensure backward and network compatibility. 16. Friendly user configuration and diagnostic utilities PAGE 1 OF 4 17. Drivers support: Linux/Android/Windows 18. High speed USB 2.0 interface for WLAN and USB 1.1 . 19. RoHS compliant 20. Transmit power no more than 1000mW 21. Voltage is 3.3VDC ENVIRONMENTAL:
Operating Operating Temperature:
0 to+70 Relative Humidity:
5-90%non-condensing) Storage Temperature:
-20 to+85 (no-operating) Relative Humidity:
5-90%non-condensing) EU Declaration Conformity Hereby, we (SMART Technologies Inc.) declared that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU Address: 3636 Research Road NW Calgary, AB T2L 1Y1, Canada Software/Hardware Software Version:
Hardware Version:
RL-UM02SPC-8812BU-V1.0 rtl88x2bu v5.2.4.5_26498.20180205_Coex20171012- 5044 Working Frequency Maximum Transmit Power:
2412MHz to 2462MHz 5180MHz to 5320MHz 5500MHz to 5700MHz Maximum E.I.R.P: 19.94 dBm Maximum E.I.R.P: 15.56 dBm Maximum E.I.R.P: 16.55 dBm Legal Information This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device is restricted to indoor use only when operating in 5150MHz to 5350MHz frequency range in following countries:
AT BE BG HR CY CZ DK EE FI IE LU MT NL PL IT LV ES SE UK PT RO SK SI FR DE EL HU LT PAGE 2 OF 4 Compliance Information FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment A host product shall use a physical label stating Contains FCC ID: QCIIDXMOD1 or shall use e-labeling The device is going to be operated in 5150~5250MHz frequency range. It is restricted indoor environment only. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. FCC Radiation Exposure Statement This transmitter must not be co-location or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 7.9 inches (20 cm) between the radiator and your body. PAGE 3 OF 4 Canadian ISED Statement Dclaration ISED canadienne This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operationof the device. Cet appareil est conforme aux normes RSS exemptes de licence d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d'interfrences, et (2) cet appareil doit accepter toute interfrence, y compris les interfrences pouvant provoquer un fonctionnement indsirable de l'appareil. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Tout changement ou modification non expressment approuv par la partie responsable de la conformit peut annuler l'autorit de l'utilisateur utiliser l'quipement. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Le dispositif utilis dans la bande 5150-5250 MHz est rserv une utilisation en intrieur afin de rduire le risque de brouillage prjudiciable aux systmes mobiles par satellite dans le mme canal. This radio transmitter (IC: 4302A-IDXMOD1) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device Antenna Type:
Antenna Gain:
Dipole Antenna 2412 MHz to 2462 MHz: Max gain: 5.03 dBi 5150 MHz to 5250 MHz: Max gain: 3.20 dBi 5250 MHz to 5350 MHz: Max gain: 3.40 dBi 5470 MHz to 5725 MHz: Max gain: 5.36 dBi Cet metteur radio (IC: 4302A-IDXMOD1) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous avec le gain maximal admissible indiqu. Les types d'antennes non inclus dans cette liste, dont le gain est suprieur au gain maximal indiqu pour ce type, sont strictement interdits pour une utilisation avec cet appareil Type d'antenne Antenne diple Gain de l'antenne:
2412 MHz 2462 MHz: Gain maximum: 5.03 dBi 5150 MHz 5250 MHz: Gain maximum: 3.20 dBi 5250 MHz 5350 MHz: Gain maximum: 3.40 dBi 5470 MHz 5725 MHz: Gain maximum: 5.36 dBi A host product shall use a physical label stating Contains IC: 4302A-IDXMOD1 or shall use e-labeling Un produit hte doit utiliser une tiquette physique indiquant "Contient IC: 4302A-IDXMOD1" ou doit utiliser un tiquetage lectronique. PAGE 4 OF 4 The device shall automatically discontinue transmission in cases of absence of information to transmit, or operational failure. Then it will scan the available radio signals. If this signal is connected before, it will be automatically connected, otherwise manual connections will be necessary. L'appareil doit automatiquement interrompre la transmission en cas d'absence d'informations transmettre, ou de panne oprationnelle. Ensuite, il va scanner les signaux radio disponibles. Si ce signal est connect auparavant, il sera automatiquement connect, sinon des connexions manuelles seront ncessaires. ISED Radiation Exposure Statement:
Dclaration d'exposition aux rayonnements ISED :
This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. Cet quipement est conforme aux limites d'exposition aux radiations RF IC dfinies pour un environnement non contrl This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet metteur ne doit pas tre situ au mme endroit ou fonctionner conjointement avec une autre antenne ou metteur This equipment should be installed and operated with minimum distance 7.9 inches (20 cm) between the radiator
& your body. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm (7,9 pouces) entre le radiateur et votre corps. PAGE 5 OF 4