FCC ID: 2AJAC-V100 IP Camera

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6968062.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA ATTENTION: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Snap One, LLC FRN: 0010808202 Contact Name: Roger Midgley Street Address: 1800 Continental Blvd., Suite 200-300, City/Province/Zip: Charlotte, NC 28273, USA Telephone No: 8015233187 Email: roger.midgley@snapone.com This letter is to confirm that we (Snap One, LLC) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature:

Date:2023-11-22 Signed by (Printed Name/Title): Roger Midgley /Principal Compliance Engineer The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name:Snap One, LLC FRN:0010808202 FCC ID: 2AJAC-V100 Contact Name:Roger Midgley Street Address: 1800 Continental Blvd., Suite 200-300, Charlotte, NC 28273, USA Telephone No:8015233187 Email:roger.midgley@snapone.com Applicant Signature:

Date: 2023-11-22 Signed by (Printed Name/Title):Roger Midgley /Principal Compliance Engineer 1800 Continental Blvd. Suite 200-300 Charlotte, NC 28273 866-424-4489 snapone.com

Snap One, LLC Section 2.911(d)(5)(i) Certification Equipment Type Company name: Snap One, LLC Address: 1800 Continental Blvd., Suite 200-300, Charlotte, NC 28273, USA Product Name: IP Camera Model Number(s): CLR-V100-4T36WF-W, CLR-V100-4B36WF-W FCC ID: 2AJAC-V100 2.911(d)(5)(i) Equipment Type We, Snap One, LLCcertify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Signature:

Name: Roger Midgley Title: Principle Compliance Engineer Company name: Snap One, LLC Date: 2023/11/22 NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Snap One, LLC Section 2.911(d)(5)(ii) Certification Applicant (Covered List ) Company name: Snap One, LLC Address: 1800 Continental Blvd., Suite 200-300, Charlotte, NC 28273, USA Product Name: IP Camera Model Number(s): CLR-V100-4T36WF-W, CLR-V100-4B36WF-W FCC ID: 2AJAC-V100 2.911(d)(5)(ii) Applicant filing We, Snap One, LLCcertify that, as of the date of the filing of the application, the applicant is not on the Covered List NOTE 1, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Signature:

Name: Roger Midgley Title:Principle Compliance Engineer Company name: Snap One, LLC Date: 2023/11/22 NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3

Agent Authorization Company: Snap One, LLC Address: 1800 Continental Blvd., Suite 200-300, Charlotte, NC 28273, USA Product Name: IP Camera Model Number(s): CLR-V100-4T36WF-W, CLR-V100-4B36WF-W FCC ID: 2AJAC-V100 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name: Roger Midgley Title: Principal Compliance Engineer Company: Snap One, LLC Date: 2023-11-27 1800 Continental Blvd. Suite 200-300 Charlotte, NC 28273 866-424-4489 snapone.com

Longse Technology Limited 2023/11/22 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Subject: Authorization of Change in Identification Original FCC ID: 2A3CE-LBH30FG400W Dear Sir/Madam, This letter grants authorization for representatives of Snap One, LLC to apply to the FCC fora change in identification as specified under CFR Title 472.933(b) of the FCC rules. This authorization applies to Longse Technology Limited with Camera and FCC ID:

2A3CE-LBH30FG400W We are aware that Snap One, LLC intends to market the above product under their own FCC ID. Sincerely, Signature: ir Ward Name: Ying Title: Manager Company: Longse Technology Limited

Snap One, LLC Date: 2023/11/22 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject:

Request for 2.933 Change in identification of equipment Reference:

FCC ID: 2AJAC-V100 Dear Sir/Madam, Snap One, LLC requests a Change in Identification for a currently approved device. This application will establish a new FCC ID for purpose of marketing. The original Grant for 2A3CE,under FCC ID: 2A3CE-LBH30FG400W with a Grant Date of 07/12/2022 will remain in effect.An authorization letter from the original Grantee is attached. We attest that the equipment is electrically identical. Only the model name, Product Name, and FCC ID are different.The original test results are applicable and continue to be representative of this device. The following files are provided as attachments:

Cover letter giving permission from original Applicant for Change in ID External photos showing no physical changes to this device New FCC identification label and its location. Thanks and Best Regards, Signature:

Name: Roger Midgley Title: Principle Compliance Engineer Company: Snap One, LLC Email: roger.midgley@snapone.com

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for confidentiality FCC ID: 2AJAC-V100 Date: November 27, 2023 To whom it may concern:

Short-term confidentiality Pursuant to DA 04-1705 of the Commissions pubic notice, in order to comply with the marketing regulations in 47CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 20 days after issue date Internal Photographs External Photographs User's manual Test Set up photo Permanent confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below:

Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Applicant Address

: Snap One, LLC

: 1800 Continental Blvd Suite 200-300 Charlotte, North Carolina 28273 USA Signature

_________________________________ Name and Job Title. E-mail Tel.

: Roger Midgley, Principle Compliance Engineer

: Roger.Midgley@SnapOne.com

: +18015233187 1800 Continental Blvd. Suite 200-300 Charlotte, NC 28273 866-424-4489 snapone.com