all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 3.39 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual | Users Manual | 3.39 MiB |
Thank you for purchasing this fine window treatment proudly constructed by us. Your shade has been custom-sized to your personal specifications with the highest standards of quality and craftsmanship. We have confidence that it will provide you with many years of beauty andeasy maintenance. Enjoy!
Follow the easy step-by-step instructions to install your shade. Should you need additional support, please feel free to call our Customer Service Center at 1-800-221-6352 or email us at windowfashions@springswindowfashions.com. We will be glad to help you. Again, we appreciate that you have chosen us to enhance the design and look of your home. Gracias por adquirir este fino tratamiento de ventana orgullosamente fabricado para usted. Su persiana ha sido hecha a la medida del cliente segn sus especificaciones personales con los ms altos estndares de calidad y trabajo artesanal. Nosotros tenemos la confianza que le proveer muchos aos de belleza y fcil mantenimiento. Disfrtela!
Siga las fciles instrucciones paso a paso"para instalar su persiana. Si necesita ayuda adicional, favor de proceder con toda libertad llamando al Centro de Servicio al Cliente al telfono 1-800-221-6352 o enviando un correo electrnico awindowfashions@springswindowfashions.com. Estaremos muy dispuestos para ayudarle. Nuevamente, nosotros apreciamos que nos haya escogido para mejorar el diseo y la apariencia de su hogar. Merci davoir achet ce superbe traitement de fentre que nous sommes fiers davoir excut pour vous. Votre store a t fait sur mesure selon votre propre cahier des charges dans un souci dexcellence et de la plus haute technicit. Nous ne doutons pas quil vous offrira des annes de beaut et dentretien facile Profitez-en bien !
Pour installer votre store, veuillez suivre les instructions dtailles. Si vous avez des questions nhsitez pas prendre contact avec notre Centre de service aprs-vente en tlphonant au 1-800-221-6352 ou par courrier lectronique au windowfashions@springswindowfashions.com. Nous vous aiderons avec plaisir. Encore une fois, nous vous remercions de nous avoir choisi pour amliorer et embellir votre intrieur. HOW TO INSTALL CMO INSTALAR COMMENT INSTALLER Inside-/ceiling- or outside-mount motorized Cellular, Pleated, or Classic Roman Shade. Inside-/ceiling- or outside-mount motorized Cellular, Pleated, or Classic Roman Shade. Inside-/ceiling- or outside-mount motorized Cellular, Pleated, or Classic Roman Shade. 1 Everything needed to install your shade Todo lo necesario para instalar su persiana. Tout le ncessaire pour installer votre store 1 Shade 2 Brackets/Screws 3 Optional Extension Brackets 4 Reloadable battery case (optional) 5 Battery hanger/Screws 6 Plug-in Transformer (optional) 7 8 AA Batteries (optional) 1 Shade 2 Brackets/Screws 3 Optional Extension Brackets 4 Reloadable battery case (optional) 5 Battery hanger/Screws 6 Plug-in Transformer (optional) 7 8 AA Batteries (optional) 1 Shade 2 Brackets/Screws 3 Optional Extension Brackets 4 Reloadable battery case (optional) 5 Battery hanger/Screws 6 Plug-in Transformer (optional) 7 8 AA Batteries (optional) 4 6 Bracket chart (items 3, 4, 8 & 10) Tabla de soportes Tableau des supports Ordered width Ancho ordenado Largeur commande Bracket quantity Cantidad de soportes Quantit de botier 1 5 7 AA8 A A A A A A A A A A A A A A A A 2 3 2 Up to 42" hasta 106,7 cm jusqu 106,7 cm 3 42116" to 72" 106,8 cm hasta 182,9 cm 106,8 cm jusqu 182,9 cm 72116" to 102" 183 cm hasta 259,1 cm 183 cm jusqu 259,1 cm 4 102116 to 132 259,2 cm hasta 335,3 cm 259,2 cm jusqu 335,3 cm 5 132116 to 144 335,4 cm hasta 365,9 cm 335,4 cm jusqu 365,9 cm 6 Shades over 3,600 in2 (4,200 Roman) will have 2 battery cases Shades over 3,600 in2 (4,200 Roman) will have 2 battery cases Shades over 3,600 in2 (4,200 Roman) will have 2 battery cases Tools needed Herramientas necesarias Outillage ncessaire Single cell Celda sencilla Cellulaire simple Double cell Celda doble Cellulaire double Pleated Plisada Pliss Looped Lazada En boucle 5 Mark screw locations; center additional brackets, if applicable Marque la ubicacin de los tornillos; centre los soportes adicionales, si es aplicable Marquer lemplacement des vis; centrer les supports supplmentaires, le cas chant Inside/ceiling mount Montaje de techo/interior Pose intrieure/au plafond Outside mount Montaje exterior Pose extrieure Optional extension bracket Soporte de extensin opcional Rallonge (en option) 1/4"
6,4 mm mOtORIzatIOn IllustRatIOns_Motorized shade install guide 1/4" to front of bracket for flush mount 6,4 mm desde el frente del soporte para un montaje a ras 6,4 mm jusqu lavant du support pour montage encastr If using optional Battery Hanger, skip ahead to step 8 If using optional Battery Hanger, skip ahead to step 8 If using optional Battery Hanger, skip ahead to step 8 6 If mounting the battery case, mark battery screw locations If mounting the battery case, mark battery screw locations If mounting the battery case, mark battery screw locations OutsIDe mOunt Inside/ceiling mount mOtORIzatIOn IllustRatIOns_Motorized shade install guide Outside mount Montaje de techo/interior Pose intrieure/au plafond Montaje exterior Pose extrieure InsIDe mOunt On right end of window, hold battery case 1" behind and 2" to the left of the rear bracket screw location and mark. For a second reloadable battery case, mount the second set 5" to the left of the first base and mark. On right end of window, hold battery case 1 behind and 2 to the left of the rear bracket screw location and mark. For a second reloadable battery case, mount the second set 5 to the left of the first base and mark. On right end of window, hold battery case 1 behind and 2 to the left of the rear bracket screw location and mark. For a second reloadable battery case, mount the second set 5 to the left of the first base and mark. Draft-Image Review Only On right end of window, hold battery case 1/4" above and to 2" the left of the left bracket screw location and mark. For a second battery case, position base 5" tot he left of the first base and mark screw locations. OutsIDe mOunt On right end of window, hold battery case 1/4 above and to 2 the left of the left bracket screw location and mark. For a second battery case, position base 5 tot he left of the first base and mark screw locations. 141209 (6-1814) On right end of window, hold battery case 1/4 above and to 2 the left of the left bracket screw location and mark. For a second battery case, position base 5 tot he left of the first base and mark screw locations. 7 Drill holes, screw brackets into place, and battery case if applicable. Drill holes, screw brackets into place, and battery case if applicable. Drill holes, screw brackets into place, and battery case if applicable. InsIDe mOunt Inside/ceiling mount Montaje de techo/interior Pose intrieure/au plafond Draft-Image Review Only Outside mount Montaje exterior Pose extrieure 1/16" drill bit Broca de 1,6 mm Mche de 1,6 mm Optional extension bracket Soporte de extensin opcional Rallonge (en option) Determine el montaje interior/de techo o exterior Choisir la pose intrieure/au plafond ou extrieure 2 Determine inside/ceiling or outside mount 3 Place shade in desired location, mark corners Coloque la persiana en la ubicacin deseada, marque las esquinas Placer le store dans lemplacement souhait, marquer les coins Inside/ceiling mount Outside mount Optional extension bracket: assemble brackets Montaje de techo/interior Pose intrieure/au plafond Montaje exterior Pose extrieure Soporte de extensin opcional: ensamble los soportes Support de projection en option : assembler les supports Attach headrail brackets to extension brackets using screws and nuts. Conecte los soportes del cabezal con los soportes de extensin utilizando tornillosy tuercas. Fixer les supports de botier aux rallonges laide des vis et des crous. 4 Measure in from both ends and mark Mida desde los dos extremos y marque Mesurer partir de chacune des extrmits et marquer Inside/ceiling mount Outside mount Montaje de techo/interior Pose intrieure/au plafond Montaje exterior Pose extrieure 6"
15,2 cm 6"
15,2 cm Springs Window Fashions Middleton, WI 53562-1096 www.springswindowfashions.com 79056-00 (07/14) 2 Remove the Battery Pack Lid from the Battery Pack Base and insert batteries into the Battery Pack Lid B 3 Reattach the Battery Pack Lid to the Battery Pack Base by aligning the pegs with the 5 Attach the Battery Pack Hanger to the assembled Battery Pack 6 7 8 AA Lithium Batteries Screws 6optionalb 1 2 3 4 5 6 Align battery polarity with 7 labels on Battery Pack Lid 7 1 Shade Headrail Bracket Battery Pack Base Battery Pack Lid Battery Pack Hanger 6optionalb 8 AA Lithium Batteries Screws 6optionalb 7 2 3 4 Tools Needed - Herramientas necesarias - Outillage ncessaire AA8 5 6 A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A AA8 Tools Needed - Herramientas necesarias - Outillage ncessaire Hanger Bracket Option Tools Needed - Herramientas necesarias - Outillage ncessaire Screw Mount Option Screw Mount Option Hanger Bracket Option 7 Everything needed to install your battery pack Hanger Bracket Option 8 Remove battery case lid, insert batteries into lid 1 Remove battery case lid, insert batteries into lid Remove battery case lid, insert batteries into lid 10 2 Remove the Battery Pack Lid from the Battery Pack Base and insert batteries into the Battery Pack Lid 2 Remove the Battery Pack Lid from the Battery Pack Base and insert batteries into the Battery Pack Lid 2 Remove the Battery Pack Lid from the Battery Pack Base and insert batteries into the Battery Pack Lid Shade Headrail Bracket Battery Pack Base Battery Pack Lid Battery Pack Hanger 6optionalb while depressing the button to lock 8 AA Lithium Batteries Screws 6optionalb 4 Tools Needed - Herramientas necesarias - Outillage ncessaire 4 Slide the Battery Pack Lid into the base Hanger Bracket Option No tools required Screw Mount Option No tools required No tools required No tools required Screw Mount Option 1 2 3 4 5 6 7 AA8 7 A A B 2 3 1 6 5 A A A A A A A A A A A A B 6 A B
-
ALK ALIN BATTERIES E AA
+
Align battery polarity with labels on Battery Pack Lid Align battery polarity with labels on Battery Pack Lid A A A A
+
Align battery polarity with labels on Battery Pack Lid RIES ATTE E LIN B A A K L AA
-
Hanger Bracket Option Tools Needed - Herramientas necesarias - Outillage ncessaire 2 Remove the Battery Pack Lid from the Battery Pack Base and insert batteries into the Battery Pack Lid Screw Mount Option No tools required A B Align battery polarity with labels on Battery Pack Lid B SNAP Pack Base by aligning the pegs with the slots Pack Base by aligning the pegs with the slots 3 Reattach the Battery Pack Lid to the Battery 3 Reattach the Battery Pack Lid to the Battery 3 Reattach the Battery Pack Lid to the Battery 4 Slide the Battery Pack Lid into the base while depressing the button to lock 2 Remove the Battery Pack Lid from the Battery Pack Base and insert batteries into the Battery Pack Lid 4 Slide the Battery Pack Lid into the base b a t 8 t o E v e r y t h i n g n e e d e d Reattach the Battery Case lid to the Battery Case base by aligning the pegs with the slots. i n s t a l Reattach the Battery Case lid to the Battery Case base by aligning the pegs with the slots. Align battery polarity with labels on Battery Pack Lid Reattach the Battery Case lid to the Battery Case base by aligning the 2 pegs with the slots. 4 Slide the Battery Pack Lid into the base t e r y p a c k while depressing the button to lock y o u r Pack Base by aligning the pegs with the slots while depressing the button to lock A B 3 l Pack Base by aligning the pegs with the slots 1 3 Reattach the Battery Pack Lid to the Battery S h a d e H e a d r a il B r a c k e t t e r y P a c k B a s e 6 o p t i o n a l t e r y P a c k L i d B a t t e r y P a c k H a n g e r B a t i e s t e r 8 A A L i t h i u m B a t B a t 5 Attach the Battery Pack Hanger to the assembled Battery Pack 5 Attach the Battery Pack Hanger to the assembled Battery Pack b 6 o p t i o n a l S c r e w s 5 Attach the Battery Pack Hanger to the assembled Battery Pack 4 Slide the Battery Pack Lid into the base while depressing the button to lock 1 5 6 7 1 2 3 4 b 3 Reattach the Battery Pack Lid to the Battery Pack Base by aligning the pegs with the slots 4 Slide the Battery Pack Lid into the base while depressing the button to lock A A A 7 T o o l s N e e d e d SNAP O p t i o n SNAP B r a c k e t SNAP r a m i e n t a s n e c e s a r i a s
-
-
Up H e r Up Up B B B H a n g e r A A A A A A A A A A A A A A A A Mount shade, Battery Case and connect power cable. Mount shade, Battery Case and connect power cable. Mount shade, Battery Case and connect power cable. Inside/ceiling mount Montaje de techo/interior Pose intrieure/au plafond Outside mount Montaje exterior Pose extrieure Optional extension bracket Soporte de extensin opcional Rallonge (en option) 5 Connect battery Cable Conecte los alambres de la batera Connecter les files de la pile A A 8 4 6 A A A A A A A A A A A A A A A A Operating your shade, Vitrual Cord Operando su persiana, Vitrual Cord Fonctionnement du store, Vitrual Cord O u t ill a g e n c e s s a i r e S c r e w M o u n t O p t i o n 5 Attach the Battery Pack Hanger to the assembled Battery Pack 9 Optional Battery Hanger 5 Attach the Battery Pack Hanger to the assembled Battery Pack Optional Battery Hanger Optional Battery Hanger A B R e m o v e t h e B a t SNAP 2 A A B Attach the battery pack hanger to the assembled battery case. Attach the battery pack hanger to the assembled battery case. Attach the battery pack hanger to the assembled battery case. Battery Hanger and press until snug 6 Tilt the Headrail Bracket through the slot in the 6 Tilt the Headrail Bracket through the slot in the Battery Hanger and press until snug B A A B Tilt the headrail bracket tthough the slot in the battery hanger and press until snug. Tilt the headrail bracket tthough the slot in the battery hanger and press until snug. Tilt the headrail bracket tthough the slot in the battery hanger and press until snug. 7 Snap the Battery Pack Assembly on the backside of the window 7 Snap the Battery Pack Assembly on the backside of the window shade shade B A A B SNAP SNAP Attach bracket with Battery Case to shade. Attach bracket with Battery Case to shade. Attach bracket with Battery Case to shade. r e d r e q u i t o o l s N o t h e B a t r o m f t e r y P a c k L i d Light Indicator Light Indicator Light Indicator Down i n s e r Down Down t e r y P a c k B a s e a n d i n t o i e s t e r b a t t t e r y P a c k L i d t h e B a t t e r y p o l a r i t y w i t h t e r y P a c k L i d A li g n b a t l a b e l s o n B a t Program Button Program Button Program Button NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement. SNAP NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement. NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement. B 1. Adding 1. Adding 1. Adding Adjusting the upper or lower limits of your shade, Vitrual Cord Adjusting the upper or lower limits of your shade, Vitrual Cord Adjusting the upper or lower limits of your shade, Vitrual Cord t h e b a s e i n t o t e r y P a c k L i d l o c k t o t o n t h e b u t t h e B a t l e d e p r e s s i n g i d e S l w h i 4 Shade Endcap/
Push Button Control Shade Endcap/
Push Button Control Shade Endcap/
Push Button Control t e r y t h e B a t t h e t h t o t h e p e g s w i t e r y P a c k L i d i g n i n g t a c h t h e B a t P a c k B a s e b y a l R e a t 8 Connect the wire lead from the s l o t s 3 8 Connect the wire lead from the Battery Pack to the motor wire lead Battery Pack to the motor wire lead t a c h A t 5 A If adjusting the upper or lower shade limits, follow these steps:
Bring the shade to the upper or lower limit by pressing Up or Down button. Once at the limit, press and hold Up and Down buttons at the same time until shade jogs (a brief up and down movement). The control and shade endcap will flash orange and then green, confirming that you are in programming mode. Adjust the shade using the Up or Down button to your desired new limit. Press and release the shade endcap, the shade will jog. t h e B a t The new limit is saved to the shade and programming is complete. The shade endcap light no longer flashes. t h e a s s e m b l e d B a t t e r y P a c k H a n g e r t e r y P a c k S N A P t o B If adjusting the upper or lower shade limits, follow these steps:
Bring the shade to the upper or lower limit by pressing Up or Down button. Once at the limit, press and hold Up and Down buttons at the same time until shade jogs (a brief up and down movement). The control and shade endcap will flash orange and then green, confirming that you are in programming mode. Adjust the shade using the Up or Down button to your desired new limit. Press and release the shade endcap, the shade will jog. The new limit is saved to the shade and programming is complete. The shade endcap light no longer flashes. If adjusting the upper or lower shade limits, follow these steps:
Bring the shade to the upper or lower limit by pressing Up or Down button. Once at the limit, press and hold Up and Down buttons at the same time until shade jogs (a brief up and down movement). The control and shade endcap will flash orange and then green, confirming that you are in programming mode. Adjust the shade using the Up or Down button to your desired new limit. Press and release the shade endcap, the shade will jog. The new limit is saved to the shade and programming is complete. The shade endcap light no longer flashes. Springs Window Fashions Middleton, WI 53562-1096 www.springswindowfashions.com 79056-00 (07/14) 1. Adding 1. Adding 1. Adding Adding a control, Virtual Cord Adding a control, Virtual Cord Adding a control, Virtual Cord If the previous Virtual Cord is lost or damaged, follow these steps to add a new control. Press and hold the shade end cap until the shade jogs (a brief up and down movement). The control and shade endcap will flash green with solid red, confirming that you are ready to pair the control. On the back of the Virtual Cord control, use a paperclip or similar item, press and release the programing button. The shade will jog. Control is now saved to the shade. If the previous Virtual Cord is lost or damaged, follow these steps to add a new control. Press and hold the shade end cap until the shade jogs (a brief up and down movement). The control and shade endcap will flash green with solid red, confirming that you are ready to pair the control. On the back of the Virtual Cord control, use a paperclip or similar item, press and release the programing button. The shade will jog. Control is now saved to the shade. If the previous Virtual Cord is lost or damaged, follow these steps to add a new control. Press and hold the shade end cap until the shade jogs (a brief up and down movement). The control and shade endcap will flash green with solid red, confirming that you are ready to pair the control. On the back of the Virtual Cord control, use a paperclip or similar item, press and release the programing button. The shade will jog. Control is now saved to the shade. For Optional Single Channel Remote For Optional Single Channel Remote For Optional Single Channel Remote Operating your shade, Single Channel Remote Operando su persiana, Single Channel Remote Fonctionnement du store, Single Channel Remote Up Up Up Down Down Down Light Indicator Light Indicator Light Indicator Stop/Intermediate/Home Position Stop/Intermediate/Home Position Stop/Intermediate/Home Position Program Button Program Button Program Buton NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement. NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement. NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement. 1. Adding 1. Adding 1. Adding Adjusting the Upper or Lower Limit of your shade, Single Channel Remote Adjusting the Upper or Lower Limit of your shade, Single Channel Remote Adjusting the Upper or Lower Limit of your shade, Single Channel Remote If adjusting the upper or lower shade limits, follow these steps:
Bring the shade to the upper or lower limit by pressing Up or Down button. Once at the limit, press and hold Up and Down buttons at the same time until shade jogs. (A brief up and down movement.) The control and shade endcap will flash orange and green, confirming that you are in programming mode. Adjust the shade using the Up or Down button to your desired new limit. Press and hold the Stop/Intermediate button on the control, until the shade jogs. The new limit is saved to the shade and programming is complete. The shade endcap light no longer flahses. If adjusting the upper or lower shade limits, follow these steps:
Bring the shade to the upper or lower limit by pressing Up or Down button. Once at the limit, press and hold Up and Down buttons at the same time until shade jogs. (A brief up and down movement.) The control and shade endcap will flash orange and green, confirming that you are in programming mode. Adjust the shade using the Up or Down button to your desired new limit. Press and hold the Stop/Intermediate button on the control, until the shade jogs. The new limit is saved to the shade and programming is complete. The shade endcap light no longer flahses. If adjusting the upper or lower shade limits, follow these steps:
Bring the shade to the upper or lower limit by pressing Up or Down button. Once at the limit, press and hold Up and Down buttons at the same time until shade jogs. (A brief up and down movement.) The control and shade endcap will flash orange and green, confirming that you are in programming mode. Adjust the shade using the Up or Down button to your desired new limit. Press and hold the Stop/Intermediate button on the control, until the shade jogs. The new limit is saved to the shade and programming is complete. The shade endcap light no longer flahses. 1. Adding 1. Adding 1. Adding Setting an Intermediate (Home) Position, Single Channel Remote Setting an Intermediate (Home) Position, Single Channel Remote Setting an Intermediate (Home) Position, Single Channel Remote Setting -
Press Up or Down to operate shade with Single Channel Remote. Bring shade to desired position, press Stop/Intermediate to stop the shade. At desired position, press and hold the Stop/Intermediate button, the shade will jog. The position is saved to the shade, repeat to set a new home position. Using -
Send the shade to the intermediate position by pressing the Stop/Intermediate button from any shade position. Note: Shade should be stationary prior to pressing the Stop/Intermediate button, if the shade is actively moving, the Stop/Intermediate button would need to be pressed twice. Setting -
Press Up or Down to operate shade with Single Channel Remote. Bring shade to desired position, press Stop/Intermediate to stop the shade. At desired position, press and hold the Stop/Intermediate button, the shade will jog. The position is saved to the shade, repeat to set a new home position. Using -
Send the shade to the intermediate position by pressing the Stop/Intermediate button from any shade position. Note: Shade should be stationary prior to pressing the Stop/Intermediate button, if the shade is actively moving, the Stop/Intermediate button would need to be pressed twice. Setting -
Press Up or Down to operate shade with Single Channel Remote. Bring shade to desired position, press Stop/Intermediate to stop the shade. At desired position, press and hold the Stop/Intermediate button, the shade will jog. The position is saved to the shade, repeat to set a new home position. Using -
Send the shade to the intermediate position by pressing the Stop/Intermediate button from any shade position. Note: Shade should be stationary prior to pressing the Stop/Intermediate button, if the shade is actively moving, the Stop/Intermediate button would need to be pressed twice. 1. Adding 1. Adding 1. Adding Adding a Control, Single Control Remote Adding a Control, Single Control Remote Adding a Control, Single Control Remote If adding a new remote, follow these steps:
A. When the Virtual Cord is not present Press and hold the shade endcap until the shade jogs. The shade endcap will flash green with, solid red. Confirming that you are ready to pair the control. On the back of the Single Channel remote, use a paperclip or similar item, press and release the programming button. The shade will jog. The control is now saved to the shade. B. Using the Virtual Cord Control, Copy and Paste On the back of the Virtual Cord Control, use a paperclip or similar item, press and hold the programming button until the shade jogs. The shade endcap will flash green, with solid red. On the back of the Single Channel remote, use a paperclip or similar item, press and release the programming button. The shade will jog. The control is now saved to the shade. If adding a new remote, follow these steps:
A. When the Virtual Cord is not present Press and hold the shade endcap until the shade jogs. The shade endcap will flash green with, solid red. Confirming that you are ready to pair the control. On the back of the Single Channel remote, use a paperclip or similar item, press and release the programming button. The shade will jog. The control is now saved to the shade. B. Using the Virtual Cord Control, Copy and Paste On the back of the Virtual Cord Control, use a paperclip or similar item, press and hold the programming button until the shade jogs. The shade endcap will flash green, with solid red. On the back of the Single Channel remote, use a paperclip or similar item, press and release the programming button. The shade will jog. The control is now saved to the shade. If adding a new remote, follow these steps:
A. When the Virtual Cord is not present Press and hold the shade endcap until the shade jogs. The shade endcap will flash green with, solid red. Confirming that you are ready to pair the control. On the back of the Single Channel remote, use a paperclip or similar item, press and release the programming button. The shade will jog. The control is now saved to the shade. B. Using the Virtual Cord Control, Copy and Paste On the back of the Virtual Cord Control, use a paperclip or similar item, press and hold the programming button until the shade jogs. The shade endcap will flash green, with solid red. On the back of the Single Channel remote, use a paperclip or similar item, press and release the programming button. The shade will jog. The control is now saved to the shade. Springs Window Fashions Middleton, WI 53562-1096 www.springswindowfashions.com 79056-00 (07/14) 1. Adding 1. Adding 1. Adding Deleting a Control, Single Channel Remote Deleting a Control, Single Channel Remote Deleting a Control, Single Channel Remote If you need to remove a control from a shade, follow these steps:
Press and hold the shade endcap until the shade jogs (a brief up and down movement). The shade endcap will flash green and solid red, confirming that you are ready to unpair the control. On the back of the Single Channel remote, use the paperclip or similar item, press and release the programming button. The shade will jog. The single channel remote is deleted, and will not operate the shade. If you need to remove a control from a shade, follow these steps:
Press and hold the shade endcap until the shade jogs (a brief up and down movement). The shade endcap will flash green and solid red, confirming that you are ready to unpair the control. On the back of the Single Channel remote, use the paperclip or similar item, press and release the programming button. The shade will jog. The single channel remote is deleted, and will not operate the shade. If you need to remove a control from a shade, follow these steps:
Press and hold the shade endcap until the shade jogs (a brief up and down movement). The shade endcap will flash green and solid red, confirming that you are ready to unpair the control. On the back of the Single Channel remote, use the paperclip or similar item, press and release the programming button. The shade will jog. The single channel remote is deleted, and will not operate the shade. 1. Adding 1. Adding 1. Adding Changing Motor Direction Changing Motor Direction Changing Motor Direction If shade raises when the down button is pressed, or if shade lowers when the up button is pressed, the motor direction needs to be modified. Follow these steps to reverse direction:
Bring shade to the approximate half way point (shade should be moved away from upper and lower limit). Using the control, press and hold the Up and Down buttons at the same time until the shade jogs. If using the Virtual Cord, press and release the shade end cap. The shade will jog. If using the Single Channel Remote, press and hold the button until the shade jogs. Motor direction is reversed, Press Up or Down button to confirm correct direction. If shade raises when the down button is pressed, or if shade lowers when the up button is pressed, the motor direction needs to be modified. Follow these steps to reverse direction:
Bring shade to the approximate half way point (shade should be moved away from upper and lower limit). Using the control, press and hold the Up and Down buttons at the same time until the shade jogs. If using the Virtual Cord, press and release the shade end cap. The shade will jog. If using the Single Channel Remote, press and hold the button until the shade jogs. Motor direction is reversed, Press Up or Down button to confirm correct direction. If shade raises when the down button is pressed, or if shade lowers when the up button is pressed, the motor direction needs to be modified. Follow these steps to reverse direction:
Bring shade to the approximate half way point (shade should be moved away from upper and lower limit). Using the control, press and hold the Up and Down buttons at the same time until the shade jogs. If using the Virtual Cord, press and release the shade end cap. The shade will jog. If using the Single Channel Remote, press and hold the button until the shade jogs. Motor direction is reversed, Press Up or Down button to confirm correct direction. FCC STATEMENTS This portable transmitter with its antenna complies with FCC/IC RF exposure limits for general population / uncontrolled exposure. Compliance Statement (Part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. 2. undesired operation. This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause Warning (Part 15.21) Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Springs Window Fashions Middleton, WI 53562-1096 www.springswindowfashions.com FCC Interference Statement (Part 15.105 (b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC STATEMENTS This portable transmitter with its antenna complies with FCC/IC RF exposure limits for general population / uncontrolled exposure. Compliance Statement (Part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. 2. undesired operation. This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause Warning (Part 15.21) Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Interference Statement (Part 15.105 (b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. INDUSTRY CANADA STATEMENTS Section 7.1.3 of RSS-GEN This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Section 7.1.2 of RSS-GEN Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. DCLARATIONS DINDUSTRIE CANADA Section 7.1.3 DE RSS-GEN Cet appareil se conforme la (aux) norme(s) RSS exempte(s) de licence dIndustrie Canada. Son fonctionnement est soumis aux deux conditions suivantes : 1) cet appareil ne doit pas causer de linterfrence, et 2) cet appareil doit accepter toute interfrence, y compris linterfrence qui peut causer un fonctionnement indsirable de lappareil. Section 7.1.2 DE RSS-GEN En vertu des rglements dIndustrie Canada, cet metteur radio ne peut fonctionner quen utilisant une antenne dun type et dune amplification maximale (ou infrieure) approuvs pour lmetteur par Industrie Canada. Pour rduire linterfrence radio potentielle aux autres utilisateurs, le type dantenne et son amplification doivent tre choisis de manire ce que la puissance isotrope rayonne quivalente (pire) ne soit pas suprieure ce qui est ncessaire pour une communication russie. Customers located in the USA and Canada contact our Customer Service Center at 1-800-221-6352 Springs Window Fashions LLC P.O. Box 500, 8467 Route 405 South Montgomery, PA 177521 Clientes de Mxico: llamar al 01-800-909-0793 para obtener instrucciones sobre el lugar al que deben enviar el producto para su reparacin. Importador en Mxico:
Springs Window Fashions Sales Company de Mxico, S. de R.L. de C.V. Carretera Federal Reynosa a Matamoros Sin Nmero Edif 10A Prologis Park, Ciudad Reynosa, Tamaulipas CP 88780 TEL. (899) 954-0361 79056-00 (07/14)
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-08-20 | 2425 ~ 2475 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2014-08-20
|
||||
1 | Applicant's complete, legal business name |
Somfy Systems
|
||||
1 | FCC Registration Number (FRN) |
0006579940
|
||||
1 | Physical Address |
121 Herrod Blvd
|
||||
1 |
Dayton, New Jersey 08810
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
DWN
|
||||
1 | Equipment Product Code |
BR
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J****** P******** H****
|
||||
1 | Title |
Industrial Operations Manager
|
||||
1 | Telephone Number |
609 3******** Extension:
|
||||
1 | Fax Number |
609-4********
|
||||
1 |
j******@somfy.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | SWF Basic Remote Control BR-01 | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is conducted | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Advanced Compliance Laboratory
|
||||
1 | Name |
W****** L********
|
||||
1 | Telephone Number |
908-9********
|
||||
1 | Fax Number |
908-9********
|
||||
1 |
a******@ac-lab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2425.00000000 | 2475.00000000 | 0.0050000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC