all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 711.47 KiB | ||||
1 | Attestation Statements | |||||||
1 | Attestation Statements | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual | Users Manual | 711.47 KiB |
4-674-967-11(1) Operating Instructions Wireless LAN PC Card
(IEEE 802.11g: 2.4 GHz/54 Mbps) PCWA-C300S 2003 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Owners Record The model and serial numbers are located on the back of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. PCWA-C300S Serial No.______________ CAUTION Any changes or modifications not expressly approved in this manual could void your warranty. FCC ID: AK8PCWAC300S Exposure to Radio Frequency Radiation. The radiated output power of the Wireless LAN PC Card is far below the FCC radio frequency exposure limits. Nevertheless, the Wireless LAN PC Card shall be used in such a manner that the potential for human contact during normal operation is minimized. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 2 Consult the dealer or an experienced radio/TV technician for help. Declaration of Conformity Trade Name: Sony Model No: PCWA-C300S Responsible Party: Sony Electronics Inc. Address: 680 Kinderkamack Road, Oradell, NJ 07649 USA Telephone: 201-930-6972 This phone number is for FCC-related matters only. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This equipment may not cause harmful interference, and
(2) this equipment must accept any interference received, including interference that may cause undesired operation. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Safety Information WARNING Opening the product, for whatever reason, could lead to damages that are not covered by the warranty. Do not use this product on hospital premises. Doing so may cause medical devices to malfunction. If using the product near a pacemaker, make sure it is at least 9 inches (22 cm) away from the pacemaker. Do not use this product in an aircraft, as doing so could cause the aircraft's equipment to malfunction. Make sure you remove the equipment from the PC card slot before carrying your computer onto an aircraft. Do not apply unnecessary physical strain on the product when it is inserted in your computer as this could damage the product and/or your computer. This product is meant for use in the USA and Canada only. FCC RF Exposure Install and connect this product by following descriptions in its Operating Instructions before using it. This equipment generates and radiates radio frequency energy. SAR (Specific Absorption Rate) for this device was measured in accordance with FCC OET Bulletin 65. Supplement C and guidelines established in IEEE C95.1-1991. In order to comply with FCC RF exposure limits please maintain at least 4 mm spacing between the user and the antenna of this device while it is in use. This product can only be used with desktop computers and laptop (notebook) computers with side mounted PCMCIA slots. This device cannot be used with other types of host devices, such as PDAs. Users are not permitted to make changes or modify the system in any way. For customers in Canada This class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. The term IC before the equipment certification number only signifies that Industry Canada technical specifications were met. Pour les utilisateurs au Canada Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Lutilisation de ce dispositif est autorise seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l'utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Pour empcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit tre utilis lintrieur et devrait tre plac loin des fentres afin de fournir un cran de blindage maximal. Si le matriel (ou son antenne dmission) est install lextrieur, il doit faire l'objet d'une licence. Le terme IC avant le mumro dhomologation ne signifie seulement que les normes dIndustrie du Canada ont t respectes. About the supplied software THE SUPPLIED SOFTWARE IS SUPPLIED PURSUANT TO THE APPLICABLE END-
USER LICENSE AGREEMENT. Copyright laws prohibit reproducing the software or the software manual in whole or in part, or renting the software without the permission of the copyright holder. In no event will SONY be liable for any financial damage or loss of profits, including claims made by third parties, arising out of the use of the software supplied with this product. In the event a problem occurs with this software as a result of defective manufacturing, SONY will replace it at SONYs option or issue a refund; however, SONY bears no other responsibility. The software provided with this product cannot be used with equipment other than that which is designated for use with. Please note that, due to continued efforts to improve quality, the software specifications may be changed without notice. Program 2001, 2002, 2003 Sony Corporation, 2000-2003 Atheros Communications, Inc., All Rights Reserved Documentation 2003 Sony Corporation are
, and Sony, VAIO, trademarks of Sony Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States of America and/or other countries. MMX and Pentium are registered trademarks of Intel Corporation. Ehternet is a registered trademark of Xerox Co., Ltd. All other trademarks are trademarks of their respective owners. 3 Table of contents Overview ................................................ 5 Capabilities ..................................... 5 System requirements ...................... 8 Documentation and Help file................ 10 Getting started Unpacking............................................. 12 Supplied software ......................... 12 Installing the supplied software ............ 13 Making Access Point Connection Settings ............................................ 20 Windows Me or Windows 2000 .. 20 Windows XP ................................ 24 Removing the Wireless LAN PC Card and Precautions When Inserting it .......... 28 To remove the Wireless LAN PC Card .......................................... 28 If your computer has two PC Card slots ........................................... 28 Wireless LAN connection Checking the communication status ..... 29 Checking the wireless signal strength ..................................... 29 Checking network information .... 29 Using the Wireless Panel ...................... 30 Opening the Wireless Panel ......... 30 Additional information Manually installing, verifying, and removing the supplied software ....... 31 Installing the Wireless LAN PC Card driver manually ......................... 31 Installing the Wireless Panel manually ................................... 39 Connecting to the Access Point with Wireless Panel
(Windows Me/2000) ................. 41 Verifying Wireless LAN PC Card driver installation ...................... 42 Uninstalling the Wireless LAN PC Card driver ................................ 50 Uninstalling the Wireless Panel ... 53 Precautions ........................................... 56 Specifications ....................................... 57 Getting help .......................................... 57 Glossary ................................................ 58 Troubleshooting .................................... 60 In this manual, Microsoft Windows Millennium Edition is referred to as Windows Me. In this manual, Microsoft Windows 2000 Professional is referred to as Windows 2000. In this manual, Microsoft Windows XP Professional and Microsoft Windows XP Home Edition are referred to as Windows XP. Notes The user interface of the Sony supplied software may differ slightly from that shown in this manual. This manual is written based on the assumption that you are familiar with basic operations of the Windows operating system. For computer operations, refer to manuals that come with your computer. 4 Overview Capabilities The Wireless LAN PC Card (IEEE 802.11g: 2.4 GHz/54 Mbps) PCWA-
C300S is a PC Card type wireless network card. With this card, you can build a wireless LAN, allowing multiple computers to communicate and exchange data without needing any physical connection. The supplied Wireless Panel software lets you easily configure the card for multiple networks. For example, you can store different settings required for networking at the office and at home, or quickly switch between Access Point (Infrastructure) Network connection mode and Peer to Peer (Ad-Hoc) Network connection mode. This greatly facilitates use of the card in various environments and for a range of applications. z Hints The network mode can easily be switched using the supplied Wireless Panel software. To use the card in Access Point Network connection mode, an IEEE 802.11g or IEEE 802.11b compliant Wireless LAN Access Point* (available separately) is necessary. With Windows Me or Windows 2000:
Access Point (Infrastructure) Network connection mode Peer to Peer (Ad-Hoc) Network connection mode
* If using the separately available Wireless LAN Access Point PCWA-A320, also refer to the documentation supplied with the unit. 5 With Windows XP:
Available Wireless Networks Windows XP Service Pack 1:
Available Wireless Networks 6 Accessing the Internet from various points within your home (Access Point Network connection mode) With a separately available Access Point you can easily build a wireless network. By connecting a DSL modem, cable modem, or ISDN router to the Access Point, you can access the Internet from the living room, bedroom, or any other convenient location in the house. Equipping multiple computers with a Wireless LAN PC Card also allows you to exchange files between the computers via the Access Point. ADSL modem etc. z Hint The illustration above gives an example of a system configuration using the Access Point Network connection mode. Two computers equipped with Wireless LAN PC Cards establish communications with the Wireless Broadband Router PCWA-AR300. The Wireless Broadband Router is connected to the ADSL modem, therefore it is possible to access the Internet through this wireless connection. 7 Direct communication between computers
(Peer to Peer Network connection mode) The Peer to Peer Network connection mode enables computers equipped with Wireless LAN PC Cards to communicate directly. This allows file sharing in locations where the Wireless LAN Access Point is not present. System requirements To use the supplied software, the following system requirements must be met:
Windows PC:
128 MB RAM or more Card Bus compliant PC Card slot CD-ROM drive (for software installation) Operating system:
Microsoft Windows Millennium Edition Microsoft Windows 2000 Professional Microsoft Windows XP Home Edition Microsoft Windows XP Professional Display:
High color (16 bit color) or higher, 800 480 pixels or higher 8 Notes Correct operation is not assured for all computers, even if satisfying the above system requirements. Correct operation in an OS upgrade environment is not assured, except for factory provided Windows XP upgrade packages for Sony VAIO series computers. For Internet access via the wireless LAN, an IEEE 802.11g or IEEE 802.11b compliant Wireless LAN Access Point (available separately) is necessary. An Internet Service Provider (ISP) is required for Internet access. Precaution when using the PCWA-C300S Because of the particular shape of the PCWA-C300S, it may not be possible to insert it into all computers. 1 The PCWA-C300S has an antenna protruding up 0.4 in. (9 mm). If obstructions 0.6 in. (15 mm) in length or more come in contact with it when you insert the PCWA-C300S into the PC card slot, you cannot fully insert the wireless LAN PC card into the slot. The antenna is obstructed. The PCWA-C300S cannot be inserted. Computer Wireless LAN PC Card PCWA-C300S 2 If the PC card slot of your computer is more than 3.3 in. (85 mm) in length, you cannot fully insert the PCWA-C300S into the slot. The PC card slot is longer than 3.3 in. (85 mm). The PCWA-C300S cannot be inserted. Computer For details, visit Wireless LAN PC Card PCWA-C300S http://www.sony.com/wirelesslansupport 9 Documentation and Help file This product comes with the following documentation and help files. Operating Instructions (this document) Explains how to install the Wireless LAN PC Card and how to configure all settings of the card. Quick Start Guide This document explains how to install software required to use the Wireless LAN PC Card (IEEE 802.11g: 2.4 GHz/54 Mbps) PCWA-
C300S. The document also contains answers to frequently asked questions and common problems. Wireless Panel Online Help This is the Online Help of the supplied Wireless Panel software. Refer to it for instructions on how to use the software. Access the Wireless Panel Online Help as follows. I Access from the Easy Installation Wizard 1 On the main menu of the Easy Installation Wizard, click Documents. 10 2 On the screen that opens, click Wireless Panel Online Help. I Access from Wireless Panel 1 Install the Wireless Panel software, following the instructions in this manual. 2 Start the Wireless Panel. 3 Right-click the Wireless Panel icon on the taskbar and click Help on the shortcut menu. z Hint You can also access Help by clicking on the Wireless Panel title bar. 11 Unpacking Your Wireless LAN PC Card comes with the following items:
Wireless LAN PC Card CD-ROM (Setup disc) Quick Start Guide Operating Instructions Warranty card Supplied software The supplied CD-ROM contains the following software. Wireless LAN PC Card driver This device driver is necessary to the operation of the Wireless LAN PC Card. Wireless Panel Wireless Panel is a utility software that lets you configure the computer for the wireless LAN and monitor the communication status. The software is also used to switch between networks. Normally, the Wireless Panel appears as an icon in the taskbar, which shows the communication status. When using the card for the first time, see page 13 for information on how to install the Wireless LAN PC Card driver and the Wireless Panel. 12 Installing the supplied software G e t t i n g s t a r t e d This section explains how to use the supplied CD-ROM to install the Wireless LAN PC Card device driver and Wireless Panel. You must insert the Wireless LAN PC Card into your computer before installing the device driver and Wireless Panel. The installation procedures are performed with an easy-to-use wizard. Before you start, verify the following. The wizard located on the CD-ROM supplied with the Wireless LAN PC Card. Make sure that your CD-ROM drive is ready for use. When using the Wireless LAN PC Card in Access Point Network Connection mode, you must install the Access Point and make the necessary settings before proceeding. For details about these procedures, refer to your Access Point users guide. Notes To install the supplied software on a computer running Windows 2000, log on with a user account listed in Administrators. To install the supplied software on a computer running Windows XP, log on with a user account with administrator access privileges. You cannot install the software or modify settings when logged on with any other account. To change any of the Wireless Panel settings on a computer running Windows 2000, log on with a user account listed in Administrators. You cannot modify settings when logged on with any other account. Exit all other Windows programs. 13 Important Computer Firewall Functions When using Windows XPs Internet Connection Firewall Enabling the Windows XP Internet Connection Firewall may prevent you from being able to access your computer through wireless communication. (This function is inactive under Windows XP default settings.) Because of this function, you may not be able to connect to your network when you change your Access Point settings. If this happens, deactivate the Internet Connection Firewall function, connect to the network, and then reactivate the function. For details, refer to Windows XP Help. Note Network security is an important issue. You are urged to consider carefully how best to protect your computer. When using a personal firewall function provided by virus scanning or network security software Virus scanning and network security software sometimes includes a function called a personal firewall that is designed to prevent illegal access by outside entities. Depending on the software, the security level of this function may be initially set to a high level. If this high security level setting is left in effect, it may be impossible for an outside entity to access your computer. This can cause problems such as not being able to connect to the network when changing the Access Points settings. In this event, lower the security level in order to permit the network connection. For details, refer to the manuals provided with your software. Notes Pay special attention to security issues. For questions regarding firewall functions, please contact your firewall software manufacturer. 14 1 When using the Wireless LAN PC Card in Access Point Network Connection mode, turn on the Access Point. 2 Insert the supplied CD-ROM into the CD-ROM drive of your computer. The Easy Installation Wizard starts automatically. G e t t i n g s t a r t e d z Hint If the Easy Installation Wizard does not appear when you insert the supplied CD-ROM into your CD-ROM drive, double-click Setup.exe (
) on the CD-ROM. Depending on the settings of your computer, the file name may be Setup. 3 When the following message appears, click OK. 4 Click the button that corresponds to your type of CD-ROM drive. 15 If you are using an external CD-ROM drive, follow the instructions on the screen and copy the contents of the CD-ROM to your hard disk. When the copy is complete, click Main Menu. The Main Menu of the Easy Installation Wizard appears. 5 Click Install Driver. The following screen appears. Insert the Wireless LAN PC Card and follow the instructions on the screen to install the device driver. 16 6 Insert the Wireless LAN PC Card in the PC card slot. You do not need to turn off your computer when you insert the Wireless LAN PC Card. G e t t i n g s t a r t e d Insert in arrow direction Notes To PC Card slot If your computer has two PC Card slots, insert the Wireless LAN PC Card into the top slot. If inserted into the bottom slot, the antenna of the Wireless LAN PC Card will block the top slot. See section If your computer has two PC Card slots on page 28. Depending on the depth and configuration of PC card slots on your computer, you may not be able to insert the Wireless LAN PC Card. Push the Wireless LAN PC Card into the slot until it is firmly seated. If the card does not fit easily, do not force it in. Take the card out and try reinserting it. When you insert the Wireless LAN PC Card, the device driver installed automatically. When installation is complete, proceed to step 7. 17 7 When installation is complete, the following screen appears. Click Continue. 8 Click Install Software Utility. The utility installation starts. 18 9 Follow the instructions on the screen to complete the installation. G e t t i n g s t a r t e d This completes the installation of the software. Once Wireless Panel is installed, appears on the Windows taskbar. What to do next Make Access Point connection settings. When using Windows Me or Windows 2000, proceed to page 20. When using Windows XP, proceed to page 24. z Hint When using Windows XP, click Main Menu as necessary to return to the first screen of the wizard, or click to close the Easy Installation Wizard. 19 Making Access Point Connection Settings After installing the necessary software, you must make the necessary settings to establish a connection with the Access Point. If you want to establish a connection in Peer to Peer Network connection mode, refer to the Wireless Panel Help for details about the necessary settings. Windows Me or Windows 2000 1 Click Connect to Access Point. The following screen appears. 2 Make the appropriate settings. 1 2 20 1Network Name (SSID) This is a unique ID used to identify wireless networks. The setting can be made individually for Access Point Network connection mode and Peer to Peer Network connection mode. When connecting to an existing network, consult your network administrator regarding the proper settings. When changing an existing Network Name, you can use up to 32 alphanumeric characters (including symbols). z Hints Opening the Network Name drop-down list will show the Network Names of any Access Points within range. You can then select a Network Name from the list. When using the Wireless LAN Access Point PCWA-A320, the default Network Name (SSID) of the Access Point is shown on the ID label of the Access Point. For details on the position of the label and other information, refer to the manuals provided with the Access Point. G e t t i n g s t a r t e d 2WEP If Data Encryption (WEP) is enabled for the Access Point to which you connect, check this item. When this item is checked, you also need to enter the encryption key (WEP key) in the Key and Confirm key fields. The data encryption function serves to prevent unauthorized access to the network. For security reasons, it is strongly recommended that you enable this feature. The setting can be configured individually for Access Point Network connection mode and Peer to Peer Network connection mode. When connecting to an existing network, consult your network administrator regarding the proper settings. For information on how to control this setting at the Access Point, refer to the manuals of the Access Point. 21 Key If data encryption (WEP) is enabled for the Access Point, enter the encryption key (WEP key) here. Because this key functions as a password that enables communication with the network, the key entered here must be exactly the same as that set for the Access Point. Only computers for which the key has been configured correctly can join the network. The number of characters depends on the ASCII/Hex and Length settings (see table below). ASCII Hexadecimal Permissible characters Alphanumeric characters 0 to 9, A to F, a to f Maximum number of characters 5 or 13 characters 10 or 26 characters Confirm key Re-enter the encryption key that you entered in the Key box. z Hint This product supports a function called roaming which allows the creation of a wireless network with multiple Access Points for wider coverage. When using this function, configure all Access Points to the same Network Name (SSID) and Data Encryption (WEP) settings. 3 When you are done, click Next. The following screen appears. 4 Make sure that the settings are correct, and then click Connect. 22 Wait until the Wireless LAN PC Card connects to the Access Point. G e t t i n g s t a r t e d When the Wireless LAN PC Card establishes the connection with the Access Point, the following screen appears. This completes the Access Point connection settings procedure. z Hint You can change the connection settings and network connection mode from Wireless Panel. For details about how to use Wireless Panel, refer to the Wireless Panel Help. 23 Windows XP After installing the necessary software, you must make the necessary settings to establish a connection with the Access Point. If you want to establish a connection in Peer to Peer Network connection mode, refer to the Wireless Panel Help for details about the necessary settings. Note Before configuring the Wireless LAN PC Card Perform the following steps to confirm that the Use Windows to configure my wireless network settings check box is selected. This option is selected by default. 1 Click Start, Control Panel, and double-click Network Connections. zHint If Network Connections is not displayed, click Switch to Classic View. 2 Right-click Wireless Network Connection * (* is a number that differs according to the computer settings), and select Properties from the shortcut menu. 3 Click the Wireless Network tab. 4 Confirm that the box Use Windows to configure my wireless network settings is checked. If not, place a check mark in the box. 1 Click Start, point to Connect To, and click Show all connections. The Network Connections window appears. 2 Right-click Wireless Network Connection * (* is a number that differs according to the computer settings), and select View Available Wireless Networks from the shortcut menu. The Connect to Wireless Network dialog box appears. 24 z Hints If the computer is not connected to a wireless network, an x is shown for the Wireless Network Connection * icon in the Network Connections window. G e t t i n g s t a r t e d If you have installed Windows XP Service Pack 1, see page 26. 3 From the Available Wireless Networks list in the Connect to Wireless Network dialog box, select the Access Point to which you want to connect. z Hint The Available Wireless Networks list shows the names of Access Points within communication range of the computer. When using the Wireless LAN Access Point PCWA-A320, the default Network Name (SSID) of the Access Point is shown on the ID label of the card. For details on the position of the label and other information, refer to the manuals of the Access Point. Because the Network Name of an Access Point may have been changed, consult your network administrator if you are not sure. 4 If Data Encryption (WEP) is enabled for the Access Point, enter the encryption key (WEP key) in the Network key field. The key entered here must be exactly the same as that set for the Access Point. Permissible characters and their maximum number are detailed below. ASCII Hexadecimal Permissible characters Alphanumeric characters 0 to 9, A to F, a to f Maximum number of characters 5 or 13 characters 10 or 26 characters 25 z Hints ASCII and hexadecimal characters are automatically identified. The data encryption (WEP) function serves to prevent unauthorized access to the network. When the function is enabled, only computers configured with the correct encryption key (WEP key) can join the network. For security reasons, it is strongly recommended that you enable this feature. The setting can be made individually for Access Point Network connection mode and Peer to Peer Network connection mode. When connecting to an existing network, consult your network administrator regarding the proper settings. For information on how to control this setting at the Access Point, refer to the manuals of the Access Point. When using Service Pack 1 If you have installed Windows XP Service Pack 1, steps 3 and 4 must be performed as follows. 3 From the Available Wireless Networks list in the Connect to Wireless Network dialog box, select the Access Point to which you want to connect. 4 Depending on the Data Encryption (WEP) settings of the Access Point, proceed as follows. Data Encryption (WEP) at selected Access Point is enabled Enter the encryption key (WEP key) in the Network key field.
(The input is shown only as asterisks.) For verification, the same string must be entered once more in the Confirm network key field. 26 Data Encryption (WEP) at selected Access Point is disabled Select Allow me to connect to the selected wireless network, even though it is not secure check box. (For security reasons, enabling data encryption is recommended.) G e t t i n g s t a r t e d 5 Click Connect. Connection to the Access Point is established. If the Access Point has already been configured, the setup procedure is now complete. If you want to change the Access Point settings, refer to the manuals of the Access Point for information on how to proceed. Note To use an Access Point to connect to the Internet, you must change the Access Point default settings. z Hint For additional information on the wireless network capabilities of Windows XP, refer to Windows XP Help and Support. (Click Start, and click Help and Support, enter wireless into the Search field, and click the green arrow icon.) You may also wish to consult the Windows XP documentation. 27 Removing the Wireless LAN PC Card and Precautions When Inserting it This section explains how to remove the Wireless LAN PC Card and outlines precautions when inserting the card in a computer with two card slots arranged one above the other. z Hint You do not need to turn off your computer when you insert or remove the Wireless LAN PC Card. To remove the Wireless LAN PC Card 1 Quit any software accessing the wireless LAN (e.g. Internet Explorer). 2 Click on the Windows taskbar. 3 Click Safely remove Sony 802.11g Wireless LAN Adapter or Stop Sony 802.11g Wireless LAN Adapter on the shortcut menu that appears. If your computer has two PC Card slots Notes When using a computer which has two PC Card slots arranged vertically (one above the other), insert the Wireless LAN PC Card into the top slot. If inserted into the bottom slot, the antenna of the Wireless LAN PC Card will block the top slot. If you insert the Wireless LAN PC Card into a slot other than the one you usually use, the computer treats the card as a new device and automatically begins installing device drivers for it. Completing the driver installation makes it possible to use the Wireless LAN PC Card in that slot. Installation is performed automatically by the installation wizard. (For instructions on how to uninstall the Wireless LAN PC Card driver, see page 50.) z Hint If you are using Windows Me or Windows 2000, you can register up to 32 networks for each PC card slot. However, you have to register each network individually. You cannot share the settings across slots. 28 W l i r e e s s L A N c o n n e c t i o n Checking the communication status Checking the wireless signal strength The communication status is shown by the signal level indicator in the taskbar. Signal level indicator Meaning of indicator appearance Excellent Good Poor Out of range Card not inserted
(Wireless LAN PC Card is not inserted or not recognized correctly) Peer to Peer
(Communicating in Peer to Peer Network connection mode) Checking network information To obtain information about the network to which you are connected, proceed as follows. Double-click the signal level indicator in the taskbar. The Wireless Panel main screen appears, and information about the network connection is shown. For details, refer to the Wireless Panel Help. 29 Using the Wireless Panel The Wireless Panel is a software application that shows information about the communication status of the computer connected to the wireless network. Normally, the Wireless Panel runs in the background and only shows the radio signal condition by means of the signal level indicator in the taskbar. The main screen of the Wireless Panel contains more detailed information. When running under operating systems other than Windows XP, communication setup and network switching are also performed using the Wireless Panel. Notes To use the Wireless Panel under Windows 2000 for modifying communication settings, log on with a user account listed in Administrators. You cannot modify settings when logged on with any other account. On a computer running Windows XP, communication setup and network switching are not performed with the Wireless Panel but with built-in functions of Windows XP. However, the Wireless Panel can be used to check the communication status. Opening the Wireless Panel To open the Wireless Panel, proceed as follows. Double-click the signal level indicator in the taskbar. The Wireless Panel appears. z Hints For information on the signal level indicator, see Checking the wireless signal strength on page 29. When you move the mouse pointer over an item in the Wireless Panel screen, a short description of that item appears. For details about how to use Wireless Panel, refer to the Wireless Panel Help. For details about how to access Help, see page 10. 30 Manually installing, verifying, and removing the supplied software Installing the Wireless LAN PC Card driver manually Notes To install the supplied software on a computer running Windows 2000, log on with a user account listed in Administrators. To install the supplied software on a computer running Windows XP, log on with a user account with administrator access privileges. You cannot install the software or modify settings when logged on with any other account. Exit all other Windows programs. 1 Insert the supplied CD-ROM into the CD-ROM drive of your computer. 2 In the Easy Installation Wizard dialog box, click Exit. 3 If your computer has only one PC card slot and it is currently used, copy the Driver folder from the supplied CD-ROM to the hard disk of your computer before inserting the Wireless LAN PC Card. The following explanation assumes that a folder called temp was created on drive C and that the data was copied to this folder. 4 Insert the Wireless LAN PC Card into the PC Card slot of the computer. 5 Install the Wireless LAN PC Card driver. The actual procedure differs slightly, depending on whether you are using Windows Me, Windows 2000, or Windows XP. See the section specific to your operating system. A d d i t i o n a l i n f o r m a t i o n 31 Windows Me:
1 Select Specify the location of the driver and click Next. 2 Check the box Specify a location. 32 3 Click Browse and specify the location of the driver in the dialog box that appears. z Hint If the Driver folder from the CD-ROM has been copied to the temp folder on drive C, enter C:\temp\Driver\WinMe. 4 Click OK. 5 Click Next. A d d i t i o n a l i n f o r m a t i o n 33 6 Click Next. The driver is installed. 7 Click Finish. Restart the computer. Windows 2000:
1 Click Next. 34 2 Select Search for a suitable driver for my device and click Next. 3 Check the box Specify a location and click Next. A d d i t i o n a l i n f o r m a t i o n 4 Click Browse and specify the location of the driver in the dialog box. z Hint If the Driver folder from the CD-ROM has been copied to the temp folder on drive C, enter C:\temp\Driver\WinXP2K. 5 Click OK. 35 6 Click Next. The driver is installed. 7 Click Finish. 36 Windows XP:
1 Select Install from a list or specific location and click Next. 2 Check the box Include this location in the search and click Browse. A d d i t i o n a l i n f o r m a t i o n 37 3 In the dialog box that appears, select the folder that contains the driver and click OK. z Hint If the Driver folder from the CD-ROM has been copied to the temp folder on drive C, select C:temp\Driver\WinXP2K. 4 Click OK. 5 Click Next. 38 6 Click Finish. Installing the Wireless Panel manually A d d i t i o n a l i n f o r m a t i o n Note When using Windows 2000, log on with a user account listed in Administrators. When using Windows XP, log on with a user account with administrator access privileges. Before installation Install the Access Point and connect it to a power outlet when using the Access Point Network connection mode. Complete installation of the Wireless LAN PC Card driver. (See page 31) Exit all other Windows programs. 1 Insert the supplied CD-ROM into the CD-ROM drive of your computer. 2 In the Easy Installation Wizard dialog box, click Exit. 3 If your computer has only one PC card slot and it is currently used, copy the WPanel folder from the supplied CD-ROM to the hard disk of your computer before inserting the Wireless LAN PC Card. The following explanation assumes that a folder called temp was created on drive C and that the data was copied to this folder. 39 4 Go to the WPanel folder copied from the CD-ROM and double-click Setup.exe. Depending on your computers settings, the file name Setup.exe may be displayed as Setup. If there are multiple files named Setup in the same folder, double-click the one with the following icon. 5 Click Next. 6 The License Agreement dialog box appears. Click Yes to accept. The Choose Destination Location dialog box appears. 7 Click Next. The Wireless Panel software is installed. 8 Click Finish. Once Wireless Panel is installed, appears on the Windows taskbar. If you installed Wireless Panel manually, see the following for details about how to connect to the Access Point. With Windows Me and Windows 2000, see Connecting to the Access Point with Wireless Panel (Windows Me/2000) on page 41. With Windows XP, see Making Access Point Connection Settings on page 20. 40 Connecting to the Access Point with Wireless Panel
(Windows Me/2000) 1 Double-click in the taskbar. The Wireless Panel screen appears. 2 Click the Network List tab, select a wireless network from the list, and click Register. The Registering Network dialog box appears. 3 If data encryption (WEP) is enabled for the Access Point, select the WEP check box, enter the encryption key in the Key box, and then confirm it by entering it again in the Confirm key box. A d d i t i o n a l i n f o r m a t i o n 4 Click Connect. The Wireless LAN PC Card connects to the Access Point. 41 Verifying Wireless LAN PC Card driver installation To verify that the Wireless LAN PC Card driver has been installed properly, perform the following steps. Windows Me:
1 Click Start, point to Settings, and click Control Panel. Control Panel appears. 2 Double-click the System icon. z Hint If the System icon is not shown, select View all Control Panel options. 3 Click the Device Manager tab. 4 Click View devices by type. 5 Double-click Network adapters. 42 6 Double-click Sony 802.11g Wireless LAN Adapter. The Sony 802.11g Wireless LAN Adapter Properties dialog box appears. A d d i t i o n a l i n f o r m a t i o n Note The Wireless LAN PC Card is not working properly in the following cases:
Sony 802.11g Wireless LAN Adapter is shown with an X or ! symbol. c Click Sony 802.11g Wireless LAN Adapter and click Remove to uninstall the driver. Then repeat the installation process. Double-clicking Network Adapters does not display Sony 802.11g Wireless LAN Adapter. c Remove the Wireless LAN PC Card. Then repeat the installation process. Double-clicking Other devices displays Ethernet Controller. c Click Ethernet Controller, then click Remove to uninstall the driver. Repeat the installation process. 7 Confirm that the message This device is working properly. is displayed under Device status. Note If This device is working properly. is not shown, the Wireless LAN PC Card is not working correctly. Perform steps 1 - 5, click Sony 802.11g Wireless LAN Adapter, then click Remove to uninstall the driver. After uninstalling, restart the computer and repeat the installation process. 43 8 Click OK to close the Sony 802.11g Wireless LAN Adapter Properties dialog box. The System Properties dialog box appears. 9 Click OK to close the System Properties dialog box. Control Panel appears. 10 Click to close Control Panel. If the computer you are using incorporates another Ethernet interface besides the Wireless LAN PC Card, disable the other interface as follows. 1 Click Start, point to Settings, and click Control Panel. Control Panel appears. 2 Double-click the System icon. z Hint If the System icon is not shown, select View all Control Panel options. 3 Click the Device Manager tab and double-click Network adapters. 4 Double-click the network adapter to disable. 5 Click the General tab, then select the Disable in this hardware profile check box. 6 Click OK to close the Properties dialog box for the network adapter to disable. The System Properties dialog box appears. 7 Click OK to close the System Properties dialog box. Control Panel appears. 8 Click to close Control Panel. 44 Windows 2000:
1 Click Start, point to Settings, and click Control Panel. Control Panel appears. 2 Double-click the System icon. The System Properties dialog box appears. 3 Click the Hardware tab, then click Device Manager. The Device Manager window appears. 4 In the View menu, click Devices by type. 5 Double-click Network adapters. 6 Double-click Sony 802.11g Wireless LAN Adapter. The Sony 802.11g Wireless LAN Adapter Properties dialog box appears. A d d i t i o n a l i n f o r m a t i o n 45 Note The Wireless LAN PC Card is not working properly in the following cases:
Sony 802.11g Wireless LAN Adapter is shown with an X or ! symbol. c Right-click Sony 802.11g Wireless LAN Adapter and click Remove to uninstall the driver. Then repeat the installation process. Double-clicking Network Adapters does not display Sony 802.11g Wireless LAN Adapter. c Remove the Wireless LAN PC Card. Then repeat the installation process. Double-clicking Other devices displays Ethernet Controller. c Right-click Ethernet Controller, then click Remove to uninstall the driver. Repeat the installation process. 7 Confirm that the message This device is working properly. is displayed under Device status. Note If This device is working properly. is not shown, the Wireless LAN PC Card is not working correctly. Perform steps 1 - 5, right-click Sony 802.11g Wireless LAN Adapter, then click Remove to uninstall the driver. After uninstalling, restart the computer and repeat the installation process. 8 Click OK to close the Sony 802.11g Wireless LAN Adapter Properties dialog box. The Device Manager window appears. 9 Click to close the Device Manager window. The System Properties dialog box appears. 10 Click OK to close the System Properties dialog box. Control Panel appears. 11 Click to close Control Panel. 46 If the computer you are using incorporates another Ethernet interface besides the Wireless LAN PC Card, disable the other interface as follows. 1 Click Start, point to Settings, and click Network and Dial-
up Connections. The Network and Dial-up Connections window appears. 2 Select the network adapter to disable. 3 On the File menu, click Disable. 4 Click window. to close the Network and Dial-up Connections Windows XP:
1 Click Start and click Control Panel. Control Panel appears. 2 Double-click the System icon. The System Properties dialog box appears. z Hint If the System icon is not displayed, click Switch to Classic View. 3 Click the Hardware tab, then click Device Manager. The Device Manager window appears. 4 On the View menu, click Devices by type. 5 Double-click Network adapters. A d d i t i o n a l i n f o r m a t i o n 47 6 Double-click Sony 802.11g Wireless LAN Adapter. The Sony 802.11g Wireless LAN Adapter Properties dialog box appears. Note The Wireless LAN PC Card is not working properly in the following cases:
Sony 802.11g Wireless LAN Adapter is shown with an X or ! symbol. c Right-click Sony 802.11g Wireless LAN Adapter and click Remove to uninstall the driver. Then repeat the installation process. Double-clicking Network Adapters does not display Sony 802.11g Wireless LAN Adapter. c Remove the Wireless LAN PC Card. Then repeat the installation process. Double-clicking Other devices displays Ethernet Controller. c Right-click Ethernet Controller, then click Remove to uninstall the driver. Repeat the installation process. 7 Confirm that the message This device is working properly. is displayed under Device status. Note If This device is working properly. is not shown, the Wireless LAN PC Card is not working correctly. Perform steps 1 - 5, right-click Sony 802.11g Wireless LAN Adapter, then click Remove to uninstall the driver. After uninstalling, restart the computer and repeat the installation process. 48 8 Click OK to close the Sony 802.11g Wireless LAN Adapter Properties dialog box. The Device Manager window appears. 9 Click to close the Device Manager window. The System Properties dialog box appears. 10 Click OK to close the System Properties dialog box. Control Panel appears. 11 Click to close Control Panel. If the computer you are using incorporates another Ethernet interface besides the Wireless LAN PC Card, disable the other interface as follows. 1 On the Start menu, click Control Panel, and double-click Network Connections. The Network Connections window appears. Note If Network Connections is not displayed, click Switch to Classic View on the left of Control Panel. A d d i t i o n a l i n f o r m a t i o n 2 From LAN or high-speed Internet, select the network adapter to disable. 3 On the File menu, click Disable. 4 Click to close the Network Connections window. 49 Uninstalling the Wireless LAN PC Card driver To uninstall the Wireless LAN PC Card driver, proceed as follows. z Hint For information on how to install the Wireless LAN PC Card driver, see page 31. Windows Me:
1 Click Start, point to Settings, and click Control Panel. Control Panel appears. 2 Double-click the System icon. The System Properties dialog box appears. z Hint If the System icon is not shown, select View all Control Panel options. 3 Click the Device Manager tab. 4 Click View devices by type. 5 Double-click Network adapters. 6 Click Sony 802.11g Wireless LAN Adapter, then click Remove. The Confirm Device Removal dialog box appears. 7 Click OK to uninstall. The message To finish removing your hardware, you must restart your computer. Do you want to restart your computer now? appears. 50 8 Remove the Wireless LAN PC Card from its slot, then click Yes. The computer restarts. This completes uninstallation of the driver. Windows 2000:
Notes In Windows 2000, only users with administrator access privileges can uninstall drivers. Log onto Windows 2000 with a user account listed in Administrators. Exit all programs before running the uninstall process. 1 Click Start, point to Settings, and click Control Panel. Control Panel appears. 2 Double-click the System icon. The System Properties dialog box appears. 3 Click the Hardware tab, then click Device Manager. The Device Manager window appears. 4 On the View menu, click Devices by type. 5 Double-click Network adapters, and double-click Sony 802.11g Wireless LAN Adapter. The Sony 802.11g Wireless LAN Adapter Properties dialog box appears. A d d i t i o n a l i n f o r m a t i o n 6 Click the Driver tab, then click Uninstall. The Confirm Device Removal dialog box appears. 7 Click OK. The Device Manager window appears. 8 Click to close the Device Manager window. The System Properties dialog box appears. 51 9 Click OK to close the System Properties dialog box. Control Panel appears. 10 Click to close Control Panel. Windows XP:
Notes In Windows XP, only users with administrator access privileges can uninstall drivers. Log onto Windows XP with a user account with administrator access privileges. Exit all programs before running the uninstall process. 1 Click Start and click Control Panel. Control Panel appears. 2 Double-click the System icon. The System Properties dialog box appears. z Hint If the System icon is not displayed, click Switch to Classic View. 3 Click the Hardware tab, then click Device Manager. The Device Manager window appears. 4 On the View menu, click Devices by type. 5 Double-click Network adapters, and Double-click Sony 802.11g Wireless LAN Adapter. The Sony 802.11g Wireless LAN Adapter Properties dialog box appears. 6 Click the Driver tab, then click Uninstall. The Confirm Device Removal dialog box appears. 7 Click OK. The Device Manager window appears. 52 8 Click to close the Device Manager window. The System Properties dialog box appears. 9 Click OK to close the System Properties dialog box. Control Panel appears. 10 Click to close Control Panel. Uninstalling the Wireless Panel To uninstall the Wireless Panel, proceed as follows. Note Exit the Wireless Panel with the icon in the taskbar before proceeding. z Hint For information on how to install the Wireless Panel, see page 39. Windows Me:
Note Exit all programs before running the uninstall process. 1 Click Start, point to Settings, and click Control Panel. Control Panel appears. 2 Double-click the Add/Remove Programs icon. The Add/Remove Programs Properties dialog box appears. 3 Select Wireless Panel and click Add/Remove. The Confirm File Deletion dialog box appears. 4 Click OK. The software uninstall process is carried out. 5 Click Finish. The uninstall process is complete. 53 A d d i t i o n a l i n f o r m a t i o n Windows 2000:
Notes In Windows 2000, only users with administrator access privileges can uninstall software. Log onto Windows 2000 with a user account listed in Administrators. Exit all programs before running the uninstall process. 1 Click Start, point to Settings, and click Control Panel. Control Panel appears. 2 Double-click the Add/Remove Programs icon. The Add/Remove Programs dialog box appears. 3 Select Wireless Panel and click Change/Remove. The Confirm File Deletion dialog box appears. 4 Click OK. The software uninstall process is carried out, and then the InstallShield completion dialog box appears. 5 Click Finish. The uninstall process is complete. 54 Windows XP:
Notes In Windows XP, only users with administrator access privileges can uninstall software. Log onto Windows XP with a user account with administrator access privileges. Exit all programs before running the uninstall process. 1 Click Start and click Control Panel. Control Panel appears. 2 Double-click the Add or Remove Programs icon. The Add or Remove Programs window appears. z Hint If the Add or Remove Programs icon is not displayed, click Switch to Classic View. 3 Select Wireless Panel and click Change/Remove. The Confirm File Deletion dialog box appears. 4 Click OK. The software uninstall process is carried out, and then the maintenance completion dialog box appears. A d d i t i o n a l i n f o r m a t i o n 5 Click Finish. The uninstall process is complete. 55 Cleaning Clean the casing with a soft cloth, lightly moistened with water or a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzene as it may damage the finish of the casing. Precautions Safety Do not drop or cause a mechanical shock to the Wireless LAN PC Card, as this may damage the unit. Installation Do not expose the Wireless LAN PC Card to the following conditions:
Unstable surfaces High humidity or poor ventilation Excessive dust Direct sunlight or extreme heat Closed cars Magnetized location (near magnets, speakers, or televisions) Locations exposed to frequent vibration Locations where the transmission of radio waves may be obstructed by metal plates or concrete walls Operation If the Wireless LAN PC Card is moved directly from a cold location to a warm locations, or if it is placed in a very damp environment, moisture may condense on the parts inside. The Wireless LAN PC Card may not operate properly if moisture condensation occurs. 56 Specifications Getting help Protocol support TCP/IP compliant Standard compliance IEEE 802.11b IEEE 802.11g Radio frequency 2.4 GHz wireless network:
2.4 to 2.4835 GHz (ISM band) Modulation DS-SS OFDM General Power requirements 3.3 V DC (supplied from the computer through the PC card adapter) Current Peak current at transmission: 700 mA Peak current at reception: 370 mA Connector PC Card Card Type II (Card Bus) Dimensions Approx. 2.2 0.2 3.6 inches
(Approx. 54 5 91 mm) (W H D)
(Antenna height: 0.55 inches (Approx. 14 mm)) Mass Approx. 1.5 oz. (Approx. 40 g) Operating temperature 41F to 95F (5C to 35C) (not condensed) Environment temperature 4F to 140F (20C to 60C) (not condensed) Supplied accessories See Unpacking on page 12. Design and specifications are subject to change without notice. A d d i t i o n a l i n f o r m a t i o n This section describes how to get help and support from Sony, as well as troubleshooting tips for your Wireless LAN PC Card. About Sonys Support Options Sony provides several support options for your Wireless LAN PC Card. Operating Instructions explains how to use your Wireless LAN PC Card. Quick Start Guide explains how to install software required to use the Wireless LAN PC Card (IEEE 802.11g:
2.4 GHz/54 Mbps) PCWA-C300S. The document also contains answers to frequently asked questions and common problems. Wireless Panel Online Help is the Online Help of the supplied Wireless Panel utility software. Refer to it for instructions on how to use the software. The Sony Wireless LAN products support Web site http://www.sony.com/
wirelesslansupport provides the latest information on your Wireless LAN products. The Sony e-mail support service answers your questions by electronic mail. Just send your question in an e-
mail message and a customer service representative will reply. To send a question to Sony e-mail support, fill out the e-mail form at http://www.ita.sel.sony.com/
support/pc/email.html 57 The Sony fax-back service provides you with answers to commonly asked questions. You can use this automated service to request a list of available topics then select the topics you want to receive. To contact the Sony fax-back service, call 1-877-760-7669. The Sony Customer Information Services Center offers information about your Wireless LAN products and other Sony products that work with your computer. To contact the Sony Customer Information Services Center, call 1-877-760-7669. Open 24 hours/day, 7 days/week. 58 Glossary Access Point (Infrastructure) Network mode A method of building a wireless network using one or more Access Points. For details, see Capabilities on page 5. Channel A part of the frequency spectrum to be used for wireless communication. Only client computers and Access Points set to the same channel can communicate with each other. Client A computer connected to a LAN (Local Area Network). Also may be called a client computer. DHCP (Dynamic Host Configuration Protocol) DHCP lets network administrators centrally manage and automate assignment of client computer IP addresses. DNS (Domain Name System) A system that translates host names into IP addresses. Networks that use the TCP/IP protocol, such as the Internet, use a set of numbers like 192.168.0.1 (IP address) to identify a computer. However, since the IP address is hard to memorize, DNS was developed to allow a name like www.sony.com to identify a computer for convenience. DNS servers manage these translations from host names into IP addresses. LAN (Local Area Network) A network which is accessible only to its members, unlike the Internet which is open to an unlimited number of people. A LAN may be built for different purposes. For example, you can build an office LAN that is accessible only to members of the same department or a home LAN that is accessible only to family members. Network Name (SSID) A wireless LAN group identifier according to the IEEE 802.11 standard. SSID stands for Service Set ID. The Network Name can be set individually for each Access Point and Peer to Peer Network to connect to. When roaming among multiple Access Points is used, all Access Points must be configured for the same Network Name (SSID) and WEP encryption key. TCP/IP (Transmission Control Protocol/Internet Protocol) TCP/IP is the network communications protocol that is used to communicate over the Internet. TCP is a connection-oriented protocol for establishing reliable, sequenced data transfer. TCP ensures that data reaches its destination. IP assembles and addresses data packets for transmission to their network destinations. WAN (Wide Area Network) A network that interconnects remote LANs through the Internet or telephone lines. A d d i t i o n a l i n f o r m a t i o n 59 Troubleshooting Read the Troubleshooting section of this guide before calling Sony Customer Information Services. If you still cannot resolve your issue after reading this section, call Sony Customer Information Services. Symptom My computer does not detect the Wireless LAN PC Card. I cannot see other computers. I cannot access the Internet. Cause/Remedy The Wireless LAN PC Card may not be properly inserted into the PC card slot of your computer. c Check that the Wireless LAN PC Card is inserted in the proper direction, then push it in as far as it will go. You did not enter a password when starting Windows. c Make sure that you enter a user name and appropriate password when you log on to Windows. Windows settings are incorrect. c Check the Windows network settings. If there are no other computers on the network to which you are connected, no other computer is displayed. The Access Point is not connected. c Follow the instructions in the Access Point Operating Instructions to connect it properly. The Wireless LAN PC Card may not be inserted into your computer. c See the instructions on page 17 of this manual to insert it properly. Communication between the Access Point and your computer are not established. c Check the communication status using the Wireless Panel. For details on how to check the status, see Checking the communication status (page 29). The Access Point is not properly configured. c Configure the Access Point with the connection method of your choice. Distance between computer and Access Point is too great. The maximum allowable distance is about 150 feet in line of sight, but this will vary depending on usage conditions. c Check the signal level indicator in the taskbar. If the level is low, bring the computer and Access Point closer together. 60 Symptom Data transfer speed is slow I cannot remember the WEP Key. Cause/Remedy There is interference with other Access Points. c Try changing the Access Point channel setting. The network is handling a large amount of simultaneous traffic. c Try again when the network load is lower. Communication distance is long. c Reduce the communication distance. There are obstacles (objects blocking radio transmission) within the communication range. c Remove the obstacles or change the installation location. c When using an Access Point, reset the Access Point to its defaults. For further information about how to reset the Access Point, see the Access Point Operating Instructions. c When using a Wireless LAN PC Card in Peer to Peer Network connection mode, delete the network settings registered on each computer connected to the network, then reconfigure the computers wireless network settings. A d d i t i o n a l i n f o r m a t i o n 61 The Sony Wireless LAN products support Web site http://www.sony.com/wirelesslansupport provides the latest information on your Wireless LAN products. The Sony e-mail support service answers your questions by electronic mail. Just send your question in an e-mail message and a customer service representative will reply. To send a question to Sony e-mail support, fill out the e-mail form at http://www.ita.sel.sony.com/support/pc/email.html The Sony fax-back service provides you with answers to commonly asked questions. You can use this automated service to request a list of available topics and then select the topics you want to receive. To contact the Sony fax-back service, call 1-877-760-7669. The Sony Customer Information Services Center offers information about your Wireless LAN products and other Sony products that work with your computer. To contact the Sony Customer Information Services Center, call 1-877-760-7669. Open 24 hours/day, 7 days/week. Printed on chlorine-free 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Printed in Japan
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-04-28 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2003-04-28
|
||||
1 | Applicant's complete, legal business name |
Sony Corporation
|
||||
1 | FCC Registration Number (FRN) |
0003739166
|
||||
1 | Physical Address |
1-7-1 Konan
|
||||
1 |
Tokyo, N/A 108-0075
|
|||||
1 |
Japan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
AK8
|
||||
1 | Equipment Product Code |
PCWAC300S
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
R**** T******
|
||||
1 | Title |
Senior Manager
|
||||
1 | Telephone Number |
81-50********
|
||||
1 | Fax Number |
81-50********
|
||||
1 |
c******@jp.sony.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
PCTEST Engineering Lab., Inc.
|
||||
1 | Name |
R****** O********
|
||||
1 | Physical Address |
6660-B Dobbin Road
|
||||
1 |
Columbia, Maryland 21045
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 2.4 GHz DSSS/OFDM WLAN PCMCIA Card | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Limited Single Modular Approval | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Limited Modular Approval. Power is conducted (20.4 mW DSSS / 30.9 mW OFDM). SAR compliance has been established in the laptop computer(s) configurations with PCMCIA slot configuration(s) (e.g., side near the rear) as tested in this filing, and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device. The highest reported SAR is 1.12 W/kg (DSSS), 1.19 W/kg (OFDM) | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 | Name |
R******** O******
|
||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412 | 2462 | 0.0204 | ||||||||||||||||||||||||||||||||||||
1 | 2 | 15C | 2412 | 2462 | 0.0309 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC