all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
(Short Confidential)MEX-BT4100P-Opr Manual-UC | Users Manual | 1014.02 KiB | ||||
1 | Test Setup Photos | |||||||
1 | Internal Photos | |||||||
1 | External Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Report | |||||||
1 | Cover Letter(s) | |||||||
1 | ID Label/Location Info | |||||||
1 | RF Exposure Info |
1 | (Short Confidential)MEX-BT4100P-Opr Manual-UC | Users Manual | 1014.02 KiB |
E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\010COV.fm masterpage:Right 000COV.book Page 1 Friday, June 15, 2012 1:02 PM 4-427-802-11(1) Bluetooth Audio System Operating Instructions GB Mode demploi FR Owners Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. MEX-BT4100P Serial No. To cancel the demonstration (DEMO) display, see page 7. Pour annuler laffichage de dmonstration (DEMO), reportez-
vous la page 4. MEX-BT4100P MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\020INT.fm masterpage:Left 000COV.book Page 2 Friday, June 15, 2012 1:02 PM Be sure to install this unit in the dashboard of the car for safety. For installation and connections, see the supplied installation/connections manual. Warning FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC. POUR LES CONSOMMATEURS AUX TATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUBEC. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 2 You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from persons body
(excluding extremities: hands, wrists, feet and ankles). CAUTION The use of optical instruments with this product will increase eye hazard. MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\020INT.fm masterpage:Right_SideIndex Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission. Android is a trademark of Google Inc. Use of this trademark is subject to Google Permissions. BlackBerry is the property of Research In Motion Limited and is registered and/or used in the U.S. and countries around the world. Used under license from Research In Motion Limited. Note on the lithium battery Do not expose the battery to excessive heat such as direct sunlight, fire or the like. Warning if your cars ignition has no ACC position Be sure to set the Auto Off function
(page 35). The unit will shut off completely and automatically in the set time after the unit is turned off, which prevents battery drain. If you do not set the Auto Off function, press and hold
until the display disappears each time you turn the ignition off. 000COV.book Page 3 Friday, June 15, 2012 1:02 PM For the State of California, USA only Perchlorate Material special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Perchlorate Material: Lithium battery contains perchlorate The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. ZAPPIN and Quick-BrowZer are trademarks of Sony Corporation. Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft. iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. 3 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\030TOC.fm masterpage:Left 000COV.book Page 4 Friday, June 15, 2012 1:02 PM Table of contents Getting Started . 6 Notes on Bluetooth function . 6 Canceling the DEMO mode . 7 Setting the clock . 7 Detaching the front panel . 7 Location of controls. 8 Main unit. 8 RM-X231 Remote commander . 10 Radio . 11 Storing and receiving stations . 11 RDS. 12 CD . 13 Playing a disc. 13 USB devices. 13 Playing back a USB device . 13 iPod . 14 Playing back iPod. 14 Operating an iPod directly Passenger control . 15 Pandora internet radio via USB (iPhone) . 16 Streaming Pandora. 16 App Remote via USB (iPhone) . 17 Two-way Music Control with iPhone. 17 Searching and playing tracks . 18 Playing tracks in various modes. 18 Searching a track by name Quick-BrowZer . 19 Searching a track by listening to track passages ZAPPIN . 20 Changing the illumination . 20 Changing the color of display and buttons Dynamic Color Illuminator . 20 Advanced color setting . 21 Connecting Bluetooth devices . 22 Bluetooth operations . 22 Pairing . 23 Connection . 24 Handsfree calling . 26 Music streaming. 29 Initializing Bluetooth Settings . 30 4 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\030TOC.fm masterpage:Right 000COV.book Page 5 Friday, June 15, 2012 1:02 PM Pandora internet radio via Bluetooth wireless technology
(Android & BlackBerry phones) . 30 Streaming Pandora. 30 App Remote via Bluetooth wireless technology (Android phone) . 32 Two-way Music Control with Android phone . 32 Sound Settings and Setup Menu. 33 Enjoying sophisticated sound functions Advanced Sound Engine . 33 Adjusting setup items . 35 Using optional equipment. 38 Auxiliary audio equipment . 38 SiriusXM Vehicle Tuner . 39 Additional Information. 40 Precautions . 40 Maintenance . 42 Specifications. 43 Troubleshooting . 44 5 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 6 Friday, June 15, 2012 1:02 PM Radio frequency exposure RF signals may affect improperly installed or inadequately shielded electronic systems in cars, such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems or air bag systems. For installation or service of this device, please consult with the manufacturer or its representative of your car. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to this device. Consult with the manufacturer of your car to ensure that the use of your cellular phone in the car will not affect its electronic system. Check regularly that all wireless device equipment in your car is mounted and operating properly. Emergency calls This Bluetooth car handsfree and the electronic device connected to the handsfree operate using radio signals, cellular, and landline networks as well as user-programmed function, which cannot guarantee connection under all conditions. Therefore do not rely solely upon any electronic device for essential communications
(such as medical emergencies). Remember, in order to make or receive calls, the handsfree and the electronic device connected to the handsfree must be switched on in a service area with adequate cellular signal strength. Emergency calls may not be possible on all cellular phone networks or when certain network services and/or phone features are in use. Check with your local service provider. Getting Started Notes on Bluetooth function Caution IN NO EVENT SHALL SONY BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASERS TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE. IMPORTANT NOTICE!
Safe and efficient use Changes or modifications to this unit not expressly approved by Sony may void the users authority to operate the equipment. Please check for exceptions, due to national requirement or limitations, in usage of Bluetooth equipment before using this product. Driving Check the laws and regulations on the use of cellular phones and handsfree equipment in the areas where you drive. Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions so require. Connecting to other devices When connecting to any other device, please read its user guide for detailed safety instructions. 6 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 7 Friday, June 15, 2012 1:02 PM Canceling the DEMO mode You can cancel the demonstration display which appears while this unit is turned off. 1 Press , rotate the control dial until DISPLAY appears, then press it. 2 Rotate the control dial until DEMO appears, then press it. 3 Rotate the control dial to select DEMO-OFF, then press it. The setting is complete. 4 Press
(BACK) twice. The display returns to normal reception/
play mode. Setting the clock The clock uses a 12-hour digital indication. 1 Press , rotate the control dial until GENERAL appears, then press it. 2 Rotate the control dial until CLOCK-
ADJ appears, then press it. The hour indication flashes. 3 Rotate the control dial to set the hour and minute. To move the digital indication, press
+/. 4 After setting the minute, press
. The setup is complete and the clock starts. To display the clock, press . Detaching the front panel You can detach the front panel of this unit to prevent theft. 1 Press and hold . The unit is turned off. 2 Press the front panel release button , then remove the panel by pulling it towards you. Caution alarm If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used. Note Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray. Attaching the front panel Engage part of the front panel with part
of the unit, as illustrated, and push the left side into position until it clicks. 7 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 8 Friday, June 15, 2012 1:02 PM Location of controls Main unit This section contains instructions on the location of controls and basic operations.
SOURCE/OFF button*1*2 Press to turn on the power; select the source (Radio/CD/USB/Pandora via USB/AUX/Bluetooth audio/Bluetooth Pandora/Bluetooth phone). Press repeatedly to change to another source. Press and hold for 1 second to turn off the power. Press and hold for more than 2 seconds to turn off the power and the display disappears.
SEEK +/ buttons Radio:
To tune in stations automatically
(press); find a station manually (press and hold). CD/USB:
To skip a track (press); skip tracks continuously (press, then press again within about 2 seconds and hold);
reverse/fast-forward a track (press and hold). Pandora via USB/Bluetooth Pandora:
8 To skip a track (press +). Bluetooth Audio*3:
To skip a track (press); reverse/fast-
forward a track (press and hold). App Remote*4:
To skip a track (press).
CALL button page 23 To enter the call menu (press); switch the Bluetooth signal (press and hold more than 2 seconds); receive/end a call
(press).
Control dial/ENTER/MENU/APP button page 17, 20, 32, 35 Rotate to adjust volume. Press to enter setup mode. Press to receive/end a call. Press and hold for more than 2 seconds to establish App Remote. After pressing , rotate then press to change the source.
Receptor for the remote commander
Disc slot Insert the disc (label side up), playback starts.
Display window MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 9 Friday, June 15, 2012 1:02 PM
(Eject) button To eject the disc.
USB port page 13, 14, 16, 17
(BACK)/MODE button page 11, 15, 17, 31 Press to return to the previous display;
select the radio band (FM/AM). Press and hold to enter/cancel the passenger control; enter the bookmark mode (Pandora via USB/Bluetooth Pandora). Press to activate/deactivate the appropriate device (this unit/cellular phone) (Bluetooth phone).
Front panel release button page 7
(BROWSE) button page 16, 19 To enter the Quick-BrowZer mode
(CD/USB); list the station (Pandora via USB/Bluetooth Pandora).
PTY (Program Type)/CAT
(Category)*5 button page 12, 39 To select PTY in RDS.
Number buttons Radio:
To receive stored stations (press); store stations (press and hold). CD/USB:
/: ALBUM / (during MP3/
WMA/AAC playback) To skip an album (press); skip albums continuously (press and hold).
(Repeat)*6 page 18
: SHUF page 18
: ZAP page 20
: PAUSE To pause playback. Press again to resume playback. Pandora via USB/Bluetooth Pandora:
/: Thumbs down ()/up ()
(press and hold for 1 second) page 16
: PAUSE To pause playback. Press again to resume playback. Bluetooth Audio*3:
(Repeat)*6 page 29
/: ALBUM /
: SHUF page 29
: PAUSE To pause playback. Press again to resume playback. Bluetooth phone: page 27, 28 To call a stored phone number (press);
to store a phone number as a preset
(press and hold) (in the call menu).
: MIC (during a call) page 27, 27 To set the MIC gain (press); to select Echo Canceller/Noise Canceller mode (press and hold). App Remote*4:
: PAUSE To pause playback. Press again to resume playback.
DSPL (Display)/SCRL (Scroll) button page 12, 13, 14, 15, 16, 25, 29, 31, 39 To change display items (press); scroll a display item (press and hold).
AUX input jack page 38
*1 If a SiriusXM Vehicle Tuner is connected:
when is pressed, the connected device (SIRIUSXM) will appear on the display. Press to select the desired SiriusXM Vehicle Tuner band.
*2 If App Remote is established with iPhone/
Android phone, the application name appears on the display when selecting the source.
*3 When a Bluetooth audio device (supports AVRCP of Bluetooth technology) is connected. Depending on the device, certain operations may not be available.
*4 When App Remote is established with iPhone/Android phone. Depending on the application, certain operations may not be available.
*5 When the SiriusXM Vehicle Tuner is connected.
*6 This button has a tactile dot. Note If the unit is turned off and the display disappears, the unit cannot be operated with the remote commander unless on 9 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 10 Friday, June 15, 2012 1:02 PM the unit is pressed, or a disc is inserted to activate the unit first. RM-X231 Remote commander Remove the insulation film before use.
OFF button To turn off the power; stop the source;
reject a call.
SOURCE button*1*2 Press to turn on the power. Press repeatedly to change to another source (Radio/CD/USB/Pandora via USB/AUX/Bluetooth audio/Bluetooth Pandora/Bluetooth phone).
()/ () buttons To control Radio/CD/USB/Pandora via USB/Bluetooth audio/Bluetooth Pandora/App Remote, the same as
/+ on the unit. Setup items can be operated by . 10 After pressing , press
to change the source.
(BACK) button To return to the previous display.
ENTER button To apply a setting; receive a call; end a call.
PTY (Program Type) button
VOL (Volume) +*3/ button
CALL button To enter the call menu. To receive/end a call.
MODE button*1 Press to select the radio band (FM/AM). Press and hold to enter/cancel the passenger control; enter the bookmark mode (Pandora via USB/Bluetooth Pandora). Press to activate/deactivate the appropriate device (this unit/cellular phone) (Bluetooth phone).
SOUND/MENU button To enter the SOUND menu directly
(press); to enter setup mode (press and hold).
(BROWSE) button
(+)/ () buttons To control CD/USB/Pandora via USB/
Bluetooth audio device/Bluetooth Pandora, the same as /
(ALBUM /) on the unit. Setup items can be operated by .
DSPL (Display)/SCRL (Scroll) button
Number buttons To receive stored stations (press); store stations (press and hold). To call a stored phone number (press);
to store a phone number as a preset
(press and hold) (in the call menu). To pause playback (press ).
*1 If a SiriusXM Vehicle Tuner is connected:
when is pressed, the connected device (SIRIUSXM) will appear on the MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 11 Friday, June 15, 2012 1:02 PM display. Press to select the desired SiriusXM Vehicle Tuner band.
*2 If App Remote is established with iPhone/
Android phone, the application name appears on the display when selecting the source.
*3 This button has a tactile dot. Radio Storing and receiving stations Caution When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically BTM 1 Press repeatedly until TUNER appears. To change the band, press repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2. 2 Press , rotate the control dial until GENERAL appears, then press it. 3 Rotate the control dial until BTM appears, then press it. The unit stores stations in order of frequency on the number buttons. Tip You can also press , rotate the control dial to select TUNER, then press it to select the source. Storing manually 1 While receiving the station that you want to store, press and hold a number button ( to ) until MEM appears. 11 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 12 Friday, June 15, 2012 1:02 PM Receiving the stored stations 1 Select the band, then press a number button ( to ). Tuning automatically 1 Select the band, then press +/
to search for the station. Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. Tip If you know the frequency of the station you want to listen to, press and hold +/ to locate the approximate frequency, then press
+/ repeatedly to fine adjust to the desired frequency (manual tuning). RDS FM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio program signal. Notes Depending on the country/region, not all RDS functions may be available. RDS will not work if the signal strength is too weak, or if the station you are tuned to is not transmitting RDS data. Changing display items Press . Selecting PTY (Program Types) Use PTY to display or search for a desired program type. 1 Press during FM reception. The current program type name appears if the station is transmitting PTY data. 12 2 Rotate the control dial until the desired program type appears, then press it. The unit starts to search for a station broadcasting the selected program type. Type of programs NEWS (News), INFORM (Information), SPORTS (Sports), TALK (Talk), ROCK
(Rock), CLS ROCK (Classic Rock), ADLT HIT (Adult Hits), SOFT RCK (Soft Rock), TOP 40 (Top 40), COUNTRY (Country), OLDIES (Oldies), SOFT (Soft), NOSTALGA
(Nostalgia), JAZZ (Jazz), CLASSICL
(Classical), R AND B (Rhythm and Blues), SOFT R B (Soft Rhythm and Blues), LANGUAGE (Foreign Language), REL MUSC (Religious Music), REL TALK
(Religious Talk), PERSNLTY (Personality), PUBLIC (Public), COLLEGE (College), WEATHER (Weather) Note You may receive a different radio program from the one you select. Setting CT (Clock Time) The CT data from the RDS transmission sets the clock. 1 Set CT-ON in setup (page 36). Note The CT function may not work properly even though an RDS station is being received. MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 13 Friday, June 15, 2012 1:02 PM CD Playing a disc This unit can play CD-DA (also containing CD TEXT) and CD-R/CD-RW (MP3/
WMA/AAC files (page 40)). 1 Insert the disc (label side up). Playback starts automatically. To eject the disc, press . Notes When ejecting/inserting a disc, keep any USB devices disconnected to avoid damage to the disc. Corresponding codec is MP3 (.mp3), WMA
(.wma) and AAC (.m4a). Changing display items Press . Displayed items may differ depending on the disc type, recording format and settings. USB devices MSC (Mass Storage Class)-type USB devices compliant with the USB standard can be used. Backup of data to a USB device is recommended. MSC (Mass Storage Class)-type Android Phone compliant with the USB standard can be used. Depending on the Android Phone, setting the USB connection mode to MSC is required. Notes Connect the USB device after starting the engine. Depending on the USB device, malfunction or damage may occur if it is connected before starting the engine. Corresponding codec is MP3 (.mp3), WMA
(.wma), AAC (.m4a) and AAC (.mp4). For details on the compatibility of your USB device, visit the support site on the back cover. Playing back a USB device 1 Open the USB cover, then connect the USB device to the USB port. Playback starts. If a USB device is already connected, to start playback, press repeatedly until USB appears. To stop playback, press and hold
for 1 second. 13 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 14 Friday, June 15, 2012 1:02 PM To remove the USB device, stop the USB playback, then remove the USB device. Notes Do not use USB devices so large or heavy that they may fall down due to vibration, or cause a loose connection. Do not detach the front panel during playback of the USB device, otherwise USB data may be damaged. Changing display items Press . Displayed items may differ depending on the USB device, recording format and settings. iPod In these Operating Instructions, iPod is used as a general reference for the iPod functions on the iPod and iPhone, unless otherwise specified by the text or illustrations. For details on the compatibility of your iPod, see About iPod (page 41) or visit the support site on the back cover. Playing back iPod Notes The maximum number of tracks is 10,000. It may take time for playback to begin, depending on the amount of recorded data. During playback or fast-forward/reverse of a VBR (Variable Bit Rate) MP3/WMA/AAC file, elapsed playing time may not display accurately. Playback of the following MP3/WMA/AAC files is not supported. lossless compression copyright-protected DRM (Digital Rights Management) files Multi-channel audio files Before connecting the iPod, turn down the volume of the unit. 1 Open the USB cover, then connect the iPod to the USB port with a USB connection cable for iPod (not supplied)*.
* RC-100IP USB connection cable for iPod is recommended. The tracks on the iPod start playing automatically from the point last played. If an iPod is already connected, to start playback, press repeatedly until USB appears. (IPD appears in the display when iPod is recognized.) To stop playback, press and hold
for 1 second. To remove the iPod, stop the iPod playback, then remove the iPod. MEX-BT4100P 4-427-802-11(1) 14 E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 15 Friday, June 15, 2012 1:02 PM Operating an iPod directly Passenger control You can operate an iPod directly even when it is connected to the dock connector. 1 During playback, press and hold
. MODE IPOD appears and you will be able to operate the iPod directly. To exit the passenger control, press and hold . MODE AUDIO will appear and direct operation of the iPod will not be possible. Note The volume can be adjusted only by the unit. Caution for iPhone When you connect iPhone via USB, phone call volume is controlled by iPhone, not the unit. Do not inadvertently increase the volume on the unit during a call, as sudden loud sound may result when the call ends. Note Do not detach the front panel during playback of the iPod, otherwise data may be damaged. Tip The iPod is recharged while the unit is turned on. Resuming mode When the iPod is connected to the dock connector, playback starts in the mode set by the iPod. In this mode, the following buttons do not function.
(SHUF)
) Changing display items Press . Note Some letters stored in iPod may not be displayed correctly. Skipping albums, podcasts, genres, playlists and artists To Skip Skip continuously Do this Press / (ALBUM /
) [press once for each skip]
Press and hold /
(ALBUM /)
[hold to desired point]
15 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 16 Friday, June 15, 2012 1:02 PM Pandora internet radio via USB (iPhone) Pandora internet radio is available to stream music through your iPhone. You can control Pandora on a USB-connected iPhone from this unit. Download the latest version of the Pandora application and obtain more information from www.pandora.com For details on usable devices, visit the support site on the back cover. Notes Certain Pandora service functions may not be The Pandora service is only available in the available. U.S. Streaming Pandora Before connecting the iPhone, turn down the volume of the unit. 1 Open the USB cover, then connect the iPhone to the USB port with a USB connection cable for iPhone (not supplied)*.
* RC-100IP USB connection cable for iPhone is recommended. 4 Adjust the volume on this unit. To pause playback, press (PAUSE). To resume playback, press again. To skip a track, press +. Notes You cannot skip back to the previous track. Pandora limits the number of skips allowed. Changing display items Press . Thumbs feedback Thumbs Up or Thumbs Down feedback allows you to personalize stations to suit your preference. Thumbs Up During playback, press and hold () for 1 second. Thumbs Down During playback, press and hold () for 1 second. Station list The station list allows you to easily select a desired station. 1 During playback, press 2 Press + to select the sorting
(BROWSE). order BY DATE or A TO Z. 2 Press repeatedly until PANDORA USB appears. 3 Launch Pandora application on the iPhone. 16 3 Rotate the control dial to select the desired station, then press it. Playback starts. Shuffle Shuffle allows you to listen to tracks played on one or more Pandora stations in your station list randomly. MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 17 Friday, June 15, 2012 1:02 PM Edit your Shuffle station selections on the device before connection. Bookmarking The track or artist currently being played can be bookmarked and stored in your Pandora account. 1 During playback, press and hold
until BOOKMARK appears. 2 Rotate the control dial to select TRK
(Track) or ART (Artist), then press it. App Remote via USB
(iPhone) Downloading the App Remote application from App StoreSM is required for iPhone. If the application is downloaded to iPhone and connected to the unit, the following features are available:
Operate the unit to launch and control compatible applications on iPhone. Operate iPhone with simple finger gestures to control the source of the unit. Display detailed source information (song title, artist name, album art, etc.) on iPhone. Available operations differ depending on the application. For details on available applications, visit the support site on the back cover. Notes For your safety, follow your local traffic laws and regulations, and do not operate the application while driving. The App Remote application via USB is only available for iPhones with iOS 5 installed. Two-way Music Control with iPhone 1 Open the USB cover, then connect iPhone to the USB port with a USB connection cable for iPhone (not supplied)*.
* RC-100IP USB connection cable for iPhone is recommended. 2 Start up the App Remote application. 3 Press and hold (APP) on the unit for more than 2 seconds. Connection to iPhone starts. 17 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 18 Friday, June 15, 2012 1:02 PM When connection is established, the name of the application on iPhone appears when selecting a source, and some playback operations for the application become available. (Available operations differ depending on the application.) Likewise, some playback operations of the unit can be controlled by iPhone. For details on the operations on iPhone, see the help of the application. Tip You can also press , rotate the control dial to select APP REM, then press it to establish the connection. And then press
to select the source. To terminate connection Press and hold . 18 Searching and playing tracks Playing tracks in various modes You can listen to tracks repeatedly (repeat play) or in random order (shuffle play). Available play modes differ depending on the selected sound source. 1 During playback, press (
) or
(SHUF) repeatedly until the desired play mode appears. Playback in selected play mode may take time to start. To play track repeatedly. album repeatedly. podcast repeatedly. artist repeatedly. playlist repeatedly. genre repeatedly. track in normal order
(Normal play). Repeat play Select TRACK ALBUM PODCAST*1 ARTIST*1 PLAYLIST*1 GENRE*1 OFF Shuffle play Select SHUF ALBUM To play album in random order. disc in random order. SHUF DISC*2 SHUF PODCAST*1 podcast in random order. artist in random order. SHUF ARTIST*1 SHUF PLAYLIST*1 playlist in random order. MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 19 Friday, June 15, 2012 1:02 PM SHUF GENRE*1 SHUF DEVICE*3 SHUF OFF genre in random order. device in random order. track in normal order
(Normal play).
*1 iPod only
*2 CD only
*3 USB and iPod only Searching a track by name Quick-BrowZer You can search for a track in a CD or USB device easily by category. 1 Press
(BROWSE)*. The unit enters the Quick-BrowZer mode, and the list of search categories appears. When the track list appears, press
(BACK) repeatedly until the desired search category appears.
* During USB playback, press
(BROWSE) for more than 2 seconds to directly return to the beginning of the category list. 2 Rotate the control dial to select the desired search category, then press it to confirm. 3 Repeat step 2 until the desired track is selected. Playback starts. To exit the Quick-BrowZer mode, press
(BROWSE). Note When entering the Quick-BrowZer mode, the repeat/shuffle setting is canceled. Searching by skip items Jump mode When many items are in a category, you can search for a desired item quickly. 1 Press + in Quick-BrowZer mode. The item name will appear. 2 Rotate the control dial to select the item near the one desired. The list is skipped in steps of 10% of the total number of items in the list. 3 Press . The display returns to the Quick-
BrowZer mode and the selected item appears. 4 Rotate the control dial to select the desired item and press it. Playback starts if the selected item is a track. To cancel Jump mode, press
(BACK) or Searching by alphabetical order Alphabet search When an iPod is connected to the unit, you can search for a desired item alphabetically. 1 Press + in Quick-BrowZer mode. 2 Rotate the control dial to select the first letter of the desired item, then press it. A list of items beginning with the selected letter appears in alphabetical order. 3 Rotate the control dial to select the desired item, then press it. Playback starts if the selected item is a track. 19 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 20 Friday, June 15, 2012 1:02 PM To cancel Alphabet search, press
(BACK) or . Notes In Alphabet search, a symbol or article (a/an/
the) before the selected letter of the item is excluded. Depending on the search item you select, only Jump mode may be available. Alphabet search may take some time, depending on the number of tracks. Searching a track by listening to track passages ZAPPIN By playing back short track passages in a CD or USB device in sequence, you can search for a track you want to listen to. ZAPPIN mode is suitable for searching for a track in shuffle or shuffle repeat mode. 1 Press (ZAP) during playback. Playback starts from a passage of the next track. You can select the playback time (page 36). Track
pressed. The part of each track to play back in ZAPPIN mode. 2 Press or (ZAP) when a track you want to listen is played back. The track that you select returns to normal play mode from the beginning. Pressing
(BACK) will also play back the chosen track. Tips Press +/ in ZAPPIN mode to skip a track. Press / (ALBUM /) in ZAPPIN mode to skip an album. 20 Changing the illumination Changing the color of display and buttons Dynamic Color Illuminator Dynamic Color Illuminator allows you to change the color of the display and buttons on the main unit to match the cars interior. You can select from 12 preset colors, customized color and 5 preset patterns. Preset colors:
RED, AMBER, M_AMBER, YELLOW, WHITE, LIGHT GREEN, GREEN, LIGHT BLUE, SKY BLUE, BLUE, PURPLE, PINK. Preset patterns:
RAINBOW, OCEAN, SUNSET, FOREST, RANDOM. 1 Press , rotate the control dial until DISPLAY appears, then press it. 2 Rotate the control dial until COLOR appears, then press it. 3 Rotate the control dial to select the desired preset color or pattern, then press it. 4 Press
(BACK) to return to the previous display. Note If the control dial is rotated rapidly, the color of the display and the buttons may change too quickly. MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 21 Friday, June 15, 2012 1:02 PM Customizing the display and button color Custom Color You can register a customized color for the display and buttons. 1 Press , rotate the control dial until DISPLAY appears, then press it. 2 Rotate the control dial until CUSTOM-C appears, then press it. 3 Rotate the control dial until BASE appears, then press it. You can select a preset color as a basis for further customizing. When you select BASE, the customized color is overwritten. 4 Rotate the control dial to select from RGB RED, RGB GRN, or RGB BLUE, then press it. 5 Rotate the control dial to adjust the color range, then press it. Adjustable color range: 0 32. You cannot set 0 for all color ranges. 6 Press
(BACK) to return to the previous display. Changing DAY/NIGHT color mode You can set a different color for DAY/
NIGHT mode according to the dimmer setting. Color mode DAY NIGHT DIMMER*1 OFF or AUTO (turn off the head light*2) ON or AUTO (turn on the head light*2)
*1 For details on the DIMMER, see page 37.
*2 Available only when the illumination control lead is connected. 1 Select DAYNIGHT in step 3. 2 Select DAY or NIGHT. 3 Customize the preset color from step 2 to 5. Advanced color setting Changing the color with sound synchronization Sound Synchronization When you select a preset pattern, sound synchronization becomes effective. 1 Press , rotate the control dial until DISPLAY appears, then press it. 2 Rotate the control dial until SND SYNC appears, then press it. 3 Rotate the control dial to select SYNC-ON, then press it. 4 Press
(BACK) to return to the previous display. Displaying clear color White Menu You can display the menu more clearly
(White) without concern for color setting. 1 Press , rotate the control dial until DISPLAY appears, then press it. 2 Rotate the control dial until WHT MENU appears, then press it. 3 Rotate the control dial to select WHITE-ON, then press it. 4 Press
(BACK) to return to the previous display. To cancel White Menu, select OFF in step 3. 21 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 22 Friday, June 15, 2012 1:02 PM Start up effect Start White In the Start White setting, when you press
, the display and buttons on the main unit turn white once, then change to the customized color. 1 Press , rotate the control dial until DISPLAY appears, then press it. 2 Rotate the control dial until START-
WHT appears, then press it. 3 Rotate the control dial to select WHITE-ON, then press it. 4 Press
(BACK) to return to the previous display. To cancel Start White, select OFF in step 3. 22 Connecting Bluetooth devices Bluetooth operations The Bluetooth function allows for handsfree calling and music streaming via this unit. To use the Bluetooth function, the following procedure is necessary.
Pairing When connecting Bluetooth devices for the first time, mutual registration is required. This is called pairing. Registration is required only for the first time, as this unit and the other devices will recognize each other automatically thereafter.
Connection To use the device after pairing is made, start the connection. Sometimes pairing allows for connection automatically.
Handsfree calling/Music streaming You can make/receive handsfree calls and listen to music when the connection is made. If pairing is not possible, your device may not be compatible with this unit. For details on compatible devices, visit the support site on the back cover. Installing the microphone To capture your voice during handsfree calling, you need to install the microphone
(supplied). For details on how to connect the microphone, refer to the supplied Installation/Connections guide. MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 23 Friday, June 15, 2012 1:02 PM Operating the Bluetooth functions 1 Press . The call menu appears. 2 Rotate the control dial until the desired item appears, then press it. Pairing The Bluetooth device (cellular phone, audio device, etc.) and this unit need to be paired before use between each other via the Bluetooth function. 3 Press
(BACK)*. The source returns to the Bluetooth phone.
* For PAIRING, REDIAL, VOICE DIAL and BT SIGNL settings, step 3 is not necessary. The following items can be set:
PAIRING*1 (page 23) PHONEBOOK (page 26) REDIAL (page 27) RECENT CALL (page 26) VOICE DIAL (page 28) DIAL NUMBER (page 27) RINGTONE*1*2 Selects whether this unit or the connected cellular phone outputs the ringtone: 1 (this unit)- 2 (cellular phone). AUTO ANS (Auto Answer) Sets this unit to answer an incoming call automatically: OFF-1 (about 3 seconds)-2 (about 10 seconds). BT SIGNL*1 (Bluetooth Signal) (page 24, 25) BT INIT*3 (Bluetooth Initialize) (page 30)
*1 You can also select these items by pressing
and rotating the control dial to select BT.
*2 Depending on the cellular phone, this units ringtone may be output even if set to 2
(cellular phone).
*3 Appears on the setup menu when the unit is turned off. Tips For details on pairing for a Bluetooth device, refer to the operating instructions supplied with the device. You can pair up to 9 Bluetooth devices with this unit. 1 Place the Bluetooth device within 1 m
(3 ft) of this unit. 2 Press and rotate the control dial until PAIRING appears, then press it. The unit enters pairing standby mode. Flashing 3 Set the Bluetooth device to search for this unit. A list of detected devices appears in the display of the device to be connected. This unit is displayed as Sony Automotive on the device to be connected. 4 If passkey* input is required in the display of the device to be connected, input 0000. 23 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 24 Friday, June 15, 2012 1:02 PM If the device supports Bluetooth version 2.1, passkey input is not required.
* Passkey may be called passcode, PIN code, PIN number or Password, etc., depending on the device. Input passkey 0000 This unit and the Bluetooth device memorize each others information, and when pairing is made, The unit is ready for connection to the device. stays lit. Note continues to flash, the Bluetooth If device may not be compatible with this unit. For details on compatible devices, visit the support site on the back cover. 5 Select this unit on the Bluetooth device to be connected. connection is made. or appears when the Notes While connecting to a Bluetooth device, this unit cannot be detected from another device. To enable detection, enter the pairing mode and search for this unit from another device. It may take time to search or connect. Depending on the device, the confirmation display of the connection appears before inputting the passkey. The time limit for inputting the passkey differs depending on the device. If the time expires, perform the pairing procedure from the beginning again. This unit cannot be connected to a device that supports only HSP (Head Set Profile). 24 Tip Connection between this unit and the Bluetooth device may be automatic, depending on the device. Cancelling pairing Perform step 2 to cancel the pairing mode after this unit and the Bluetooth device are paired. Connection To use the device after pairing is made, start the connection. Sometimes pairing allows for connection automatically. If pairing has already been achieved, start operation from here. Connecting a cellular phone 1 Press and rotate the control dial until BT SIGNL appears, then press it. activated. lights up when Bluetooth signal is Note When the Bluetooth signal for this unit is already ON, selecting BT SIGNL deactivates the Bluetooth signal. Tip You can also output the Bluetooth signal from this unit by pressing and holding on this unit more than two seconds. MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 25 Friday, June 15, 2012 1:02 PM 2 Turn on the cellular phone and activate the Bluetooth signal. 3 Connect to this unit using the cellular appears when the connection is phone. made. If you select the Bluetooth phone source after the connection is made, the network name and the connected cellular phone name appear in the display. Icons in the display:
Signal strength status of connected cellular phone.*
Remaining battery status of connected cellular phone.*
* Turns off without handsfree connection. Differs depending on the cellular phone. Changing display items Press . Connecting the last-connected cellular phone from this unit 1 Make sure the Bluetooth signal of the cellular phone is activated. 2 Press repeatedly until BT PHONE appears. 3 Press . flashes while the connection is being made, then stays lit while connected. Notes Some cellular phones require permission to access their phonebook data during handsfree connection to this unit. Obtain permission via the cellular phone. While streaming Bluetooth audio, you cannot connect from this unit to the cellular phone. Connect from the cellular phone to this unit instead. A connecting noise may be heard over playback sound. Tip With Bluetooth signal on: when the ignition is turned to on, this unit reconnects automatically to the last-connected cellular phone. But automatic connection also depends on the cellular phones specification. If automatic connection is not made, connect manually. Connecting an audio device 1 Press and rotate the control dial until BT SIGNL appears, then press it. activated. lights up when Bluetooth signal is 2 Turn on the audio device and activate the Bluetooth signal. 3 Connect to this unit using the audio appears when the connection is device. made. Connecting the last-connected audio device from this unit 1 Make sure the Bluetooth signal of the audio device is activated. 2 Press repeatedly until BT AUDIO appears. 3 Press (PAUSE). flashes while the connection is being made, then stays lit while connected. 25 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 26 Friday, June 15, 2012 1:02 PM Handsfree calling Once the unit is connected to the cellular phone, you can make/receive handsfree calls by operating this unit. Before handsfree calling, check the following:
Make sure that and appear in the display. and
If do not appear, perform the connection procedure (page 24).
If you cannot connect this unit and the cellular phone via the Bluetooth function, perform the pairing procedure
(page 23). Receiving calls When receiving a call, a ringtone is output from your car speakers or the connected cellular phone. The callers name or phone number appears in the display. 1 Press when a call is received with a ringtone. The phone call starts. Notes Depending on the cellular phone, the callers name may appear. The ringtone and talkers voice are output only from the front speakers. Rejecting a call Press and hold for 1 second. Ending a call Press again. 26 Calling from the phonebook When connecting to a cellular phone supporting PBAP (Phone Book Access Profile), you can access the phonebook, and make a call. 1 Press and rotate the control dial until PHONEBOOK appears, then press it. 2 Rotate the control dial to select an initial from the initial list, and then press it. 3 Rotate the control dial to select a name from the name list, and then press it. 4 Rotate the control dial to select a number from the number list, and then press it. The phone call starts. Note Depending on the cellular phone, contacts displayed on the unit may differ from the phonebook of the cellular phone. Note on phonebook data Disconnecting the power supply lead will erase all the phonebook data. Calling from the call history You can access to the call history stored in the cellular phone, and make a call. This unit stores up to 20 calls in the call history. 1 Press and rotate the control dial until RECENT CALL appears, then press it. A list of the call history appears. 2 Rotate the control dial to select a name or phone number from the call history, then press it. The phone call starts. MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 27 Friday, June 15, 2012 1:02 PM Note The call history in this unit may not change even if the respective cellular phones call history is deleted. Calling by phone number input 1 Press and rotate the control dial until DIAL NUMBER appears, then press it. 2 Rotate the control dial to enter the phone number, and lastly select
(space), then press the button*. The phone call starts.
* To move the digital indication, press
/+. Note _ appears instead of # on the display. Calling by preset number You can store up to 6 contacts in the preset dial. For details on how to store, see Preset dial (page 28). 1 Press , rotate the control dial until Bluetooth phone appears, then press it. 2 Press a number button ( to ) to select the contact you want to call. 3 Press . The phone call starts. Calling by redial 1 Press and rotate the control dial until REDIAL appears, then press it. The phone call starts. Operations during a call Presetting the volume of the ringtone and talkers voice You can preset the volume level of the ringtone and talkers voice. To adjust the ringtone volume:
Rotate the control dial while receiving a call. Ringtone volume can be adjusted. To adjust the talkers voice volume:
Rotate the control dial during a call. The talkers voice volume can be adjusted. Note If the Bluetooth phone source is selected, rotating the control dial will only adjust the talkers volume. Mic gain adjustment You can adjust the volume for the other party. Press (MIC) to adjust the volume levels (MIC-LOW, MIC-MID, MIC-
HI). EC/NC Mode (Echo Canceller/Noise Canceller Mode) You can reduce echo and noise. Press and hold (MIC) to set to EC/
NC-1 or EC/NC-2. Call transfer In order to activate/deactivate the appropriate device (this unit/cellular phone), press or use your cellular phone. Notes For details on cellular phone operation, refer to your cellular phone manual. Depending on the cellular phone, handsfree connection may be cut off when call transfer is attempted. 27 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 28 Friday, June 15, 2012 1:02 PM Tip Store voice tags while seated in the car, via this unit with BT PHONE source selected. Preset dial Contacts (up to 6) in the phonebook can be stored in the preset dial. 1 Select a phone number that you want to store in the preset dial, from the phonebook, call history* or by inputting the phone number directly. The phone number appears in the display of this unit.
* For the call history, you can also select from the caller name. In this case, the caller name appears in the display of this unit. 2 Press and hold a number button ( to ) to select the preset number to store until MEM appears. The contact is stored in the selected preset number. Voice dial activation You can activate voice dialing with a cellular phone connected to this unit by saying the voice tag stored on the cellular phone, then make a call. 1 Press and rotate the control dial until VOICE DIAL appears, then press it. 2 Say the voice tag stored on the cellular phone. Your voice is recognized, and the call is made. Notes Check that the unit and cellular phone are connected beforehand. Store a voice tag on your cellular phone beforehand. If you activate voice dialing with a cellular phone connected to this unit, this function may not always work in some cases. Voice dialing may not work in some situations, depending on the effectiveness of the cellular phones recognition function. For details, see the support site on the back cover. 28 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 29 Friday, June 15, 2012 1:02 PM SMS indicator While connecting a cellular phone to this unit, the SMS indicator informs you of any incoming or unread SMS messages. If you receive a new SMS message, the SMS indicator flashes. If there are any unread SMS messages, the SMS indicator stays lit. Note Function of the SMS indicator may depend on the cellular phone. Music streaming Listening to music from an audio device You can listen to music from an audio device on this unit if the audio device supports A2DP (Advanced Audio Distribution Profile) of Bluetooth technology. 1 Turn down the volume on this unit. 2 Press repeatedly until BT AUDIO appears. 3 Operate the audio device to start playback. 4 Adjust the volume on this unit. Changing display items Press . Adjusting the volume level The volume level is adjustable for any difference between the unit and the Bluetooth audio device. 1 Start playback of the Bluetooth audio device at a moderate volume. 2 Set your usual listening volume on the unit. 3 Press , rotate the control dial until SOUND appears, then press it. 4 Rotate the control dial until BTA VOL appears, and rotate the volume control dial to adjust the input level (+18dB 0dB 8dB). Operating an audio device with this unit You can perform the following operations on this unit if the audio device supports AVRCP (Audio Video Remote Control Profile) of Bluetooth technology. (The operation differs depending on the audio device.) To Skip albums Do this Press / (ALBUM /)
[press once for each album]
Press (REP)*1 Press (SHUF)*1 Press (PAUSE)*2 on this unit. Press (PAUSE)*2 on this unit. Press /+ (/
) [press once for each track]
Press and hold /+
(/) [hold to desired point]
Repeat play Shuffle play Play Pause Skip tracks Reverse/
Fast-forward 29 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 30 Friday, June 15, 2012 1:02 PM
*1 Press repeatedly until the desired setting appears.
*2 Depending on the device, it may be necessary to press twice. Operations other than the above should be performed on the audio device. Notes Depending on the audio device, information, such as title, track number/time, playback status, etc., may not be displayed on this unit. The information is displayed during Bluetooth audio playback only. Even if the source is changed on this unit, playback of the audio device does not stop. Initializing Bluetooth Settings You can initialize all the Bluetooth related settings (pairing information, preset number, device information, etc.) from this unit. 1 Press and hold for 1 second to turn off the power. 2 Press and hold . The menu list appears. 3 Rotate the control dial to select BT INIT, then press it. The confirmation appears. 4 Rotate the control dial to select INIT-
YES, then press it. INITIAL flashes while initializing the Bluetooth settings; COMPLETE appears when initializing has finished. Note When disposing of this unit, preset numbers should be deleted with BT INIT. 30 Pandora internet radio via Bluetooth wireless technology (Android
& BlackBerry phones) Pandora internet radio is available to stream music through your Android and BlackBerry phones. You can control Pandora on Bluetooth connected Android and BlackBerry phone from this unit. Download the latest version of the Pandora application and obtain more information from www.pandora.com For details on usable devices, visit the support site on the back cover. Notes Certain Pandora service functions may not be available. You can control Pandora via the Bluetooth function on Android and BlackBerry phones only. The Pandora service is only available in the U.S. You cannot control Pandora via the Bluetooth function while running the App Remote application via Bluetooth. Streaming Pandora Before connecting the mobile device, turn down the volume of the unit. 1 Connect this unit and the mobile device via the Bluetooth function
(page 22). 2 Press repeatedly until BT PANDORA appears. 3 Launch Pandora application on the mobile device. MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 31 Friday, June 15, 2012 1:02 PM 4 Press * (PAUSE) to start playback.
* When the mobile device is connected, the device number may appear. Make sure that the same numbers are displayed (e.g., 123456) in this unit and the mobile device, then press on this unit and select Yes on the mobile device. To pause playback, press (PAUSE). To resume playback, press again. To skip a track, press +. Notes You cannot skip back to the previous track. Pandora limits the number of skips allowed. Changing display items Press . Adjusting the volume level The volume level of Pandora internet radio is adjusted in the same way as a Bluetooth audio device. For details, see page 29. Thumbs feedback Thumbs Up or Thumbs Down feedback allows you to personalize stations to suit your preference. Thumbs Up During playback, press and hold () for 1 second. Thumbs Down During playback, press and hold () for 1 second. Station list The station list allows you to easily select a desired station. 1 During playback, press
(BROWSE). 2 Press + to select the sorting order BY DATE or A TO Z. 3 Rotate the control dial to select the desired station, then press it. Playback starts. Shuffle Shuffle allows you to listen to tracks played on one or more Pandora stations in your station list randomly. Edit your Shuffle station selections on the device before connection. Bookmarking The track or artist currently being played can be bookmarked and stored in your Pandora account. 1 During playback, press and hold
until BOOKMARK appears. 2 Rotate the control dial to select TRK
(Track) or ART (Artist), then press it. 31 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 32 Friday, June 15, 2012 1:02 PM Two-way Music Control with Android phone Before connecting the mobile device, turn down the volume of the unit. 1 Connect this unit and the mobile device via the Bluetooth function
(page 22). 2 Start up the App Remote application. 3 Press and hold (APP) on the unit for more than 2 seconds. Connection to the mobile device starts. When connection is established, the name of the application on the mobile device appears when selecting a source, and some playback operations for the application become available. (Available operations differ depending on the application.) Likewise, some playback operations of the unit can be controlled by the mobile device. For details on the operations on the mobile device, see the help of the application. Tip You can also press , rotate the control dial to select APP REM, then press it to establish the connection. And then press
to select the source. To terminate connection Press and hold . App Remote via Bluetooth wireless technology (Android phone) Downloading the App Remote application from Google Play is required for Android phone. If the application is downloaded to an Android phone and connected to the unit, the following features are available:
Operate the unit to launch and control compatible applications on Android phone. Operate Android phone with simple finger gestures to control the source of the unit. Display detailed source information (song title, artist name, album art, etc.) on Android phone. Read out incoming text messages/SMS automatically. Available operations differ depending on the application. For details on available applications, visit the support site on the back cover. Notes For your safety, follow your local traffic laws and regulations, and do not operate the application while driving. The App Remote application via the Bluetooth function is only available for Android phones with Android 2.1, 2.2, 2.3 or 4.0 installed. Automatic reading of the SMS function is only available for Android phones with TTS Engine installed. You cannot control the App Remote application via the Bluetooth function while running Pandora via Bluetooth. 32 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 33 Friday, June 15, 2012 1:02 PM Sound Settings and Setup Menu Enjoying sophisticated sound functions Advanced Sound Engine Advanced Sound Engine creates an ideal in-
car sound field with digital signal processing. Selecting the sound quality EQ7 Preset You can select an equalizer curve from 7 equalizer curves (XPLOD, VOCAL, EDGE, CRUISE, SPACE, GRAVITY, CUSTOM or OFF). 1 During reception/playback, press
, rotate the control dial until SOUND appears, then press it. 2 Rotate the control dial until EQ7 PRESET appears, then press it. 3 Rotate the control dial until the desired equalizer curve appears, then press it. 4 Press
(BACK) to return to the previous display. To cancel the equalizer curve, select OFF in step 3. Tip The equalizer curve setting can be memorized for each source. Customizing the equalizer curve EQ7 Setting CUSTOM of EQ7 allows you to make your own equalizer settings. 1 After selecting a source, press , rotate the control dial until SOUND appears, then press it. 2 Rotate the control dial until EQ7 SETTING appears, then press it. 3 Rotate the control dial until BASE appears, then press it. You can select an equalizer curve as a basis for further customizing. 4 Rotate the control dial to select the equalizer curve, then press it. 5 Setting the equalizer curve.
Rotate the control dial to select the frequency range, then press it. BAND1: 63 Hz BAND2: 160 Hz BAND3: 400 Hz BAND4: 1 kHz BAND5: 2.5 kHz BAND6: 6.3 kHz BAND7: 16.0 kHz
Rotate the control dial to adjust the volume level, then press it. The volume level is adjustable in 1 dB steps, from 6 dB to +6 dB. Repeat steps and to adjust other frequency ranges. 6 Press
(BACK) to return to the previous display. The equalizer curve is stored in CUSTOM. Optimizing sound by Time Alignment Listening Position The unit can simulate a natural sound field by delaying the sound output from each speaker to suit your position. 33 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 34 Friday, June 15, 2012 1:02 PM The options for POSITION are indicated below. FRONT L (): Front left FRONT R (): Front right FRONT (): Center front ALL (): In the center of your car OFF: No position set Adjusting the listening position You can fine-tune the listening position setting. 1 During reception/playback, press
, rotate the control dial until SOUND appears, then press it. You can also set the approximate subwoofer position from your listening position if the listening position is set to other than OFF. The options for SET SW POS are indicated below. NEAR (): Near NORMAL (): Normal FAR (): Far 1 During reception/playback, press
, rotate the control dial until SOUND appears, then press it. 2 Rotate the control dial until POSITION appears, then press it. 3 Rotate the control dial until SET F/R POS appears, then press it. 4 Rotate the control dial to select from FRONT L, FRONT R, FRONT or ALL, then press it. 5 Rotate the control dial until SET SW POS appears, then press it. 6 Rotate the control dial to select the subwoofer position from NEAR, NORMAL or FAR, then press it. 7 Press
(BACK) to return to the previous display. To cancel listening position, select OFF in step 4. 34 2 Rotate the control dial until POSITION appears, then press it. 3 Rotate the control dial until ADJ POSITION appears, then press it. 4 Rotate the control dial to adjust the listening position, then press it. Adjustable range: +3 CENTER 3. 5 Press
(BACK) to return to the previous display. DM+ Advanced DM+ Advanced improves digitally compressed sound by restoring high frequencies lost in the compression process. 1 During playback, press , rotate the control dial until SOUND appears, then press it. 2 Rotate the control dial until DM+
appears, then press it. 3 Rotate the control dial to select ON, then press it. 4 Press
(BACK) to return to the previous display. Tip The DM+ setting can be memorized for each source other than the tuner. MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 35 Friday, June 15, 2012 1:02 PM Using rear speakers as subwoofer Rear Bass Enhancer Rear Bass Enhancer enhances the bass sound by applying a low pass filter setting
(page 37) to the rear speakers. This function allows the rear speakers to work as a subwoofer if one is not connected. 1 During reception/playback, press
, rotate the control dial until SOUND appears, then press it. 2 Rotate the control dial until RB ENH appears, then press it. 3 Rotate the control dial until RBE MODE appears, then press it. 4 Rotate the control dial to select from 1, 2 or 3, then press it. 5 Press
(BACK) to return to the previous display. 4 Rotate the control dial to select 1, 2 or 3, then press it. 5 Press
(BACK) to return to the previous display. For details on the settings for the subwoofer phase, position, low pass filter frequency and the low pass filter slope, see page 37. Adjusting setup items 1 Press , rotate the control dial until the desired category appears, then press it. 2 Rotate the control dial until the desired item appears, then press it. 3 Rotate the control dial to select the setting, then press it.*
The setting is complete. 4 Press
(BACK) to return to the previous display. Using a subwoofer without a power amplifier Subwoofer Direct Connection You can use the subwoofer without a power amplifier when it is connected to the rear speaker cord. Note Be sure to connect a 4 - 8 ohm subwoofer to either of the rear speaker cords. Do not connect a speaker to the other rear speaker cord. 1 During reception/playback, press
, rotate the control dial until SOUND appears, then press it. 2 Rotate the control dial until SW DIREC appears, then press it. 3 Rotate the control dial until SW MODE appears, then press it.
* For CLOCK-ADJ and BTM settings, step 4 is not necessary. The following items can be set depending on the source and setting:
GENERAL:
CLOCK-ADJ (Clock Adjust) (page 7) CAUT ALM*1 (Caution Alarm) Activates the caution alarm: ON, OFF (page 7). BEEP Activates the beep sound: ON, OFF. AUTO OFF Shuts off automatically after a desired time when the unit is turned off: NO, 30S (Seconds), 30M (Minutes), 60M
(Minutes). 35 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 36 Friday, June 15, 2012 1:02 PM AUX-A*1*2 (AUX Audio) Activates the AUX source display: ON, OFF (page 38). CT (Clock Time) Activates the CT function: ON, OFF
(page 12). BTM*3 (page 11) ZAPPIN*4 ZAP TIME (Zappin Time) Selects the playback time for the ZAPPIN function. Z.TIME-1 (about 6 seconds), Z.TIME-2 (about 15 seconds), Z.TIME-3 (about 30 seconds). ZAP BEEP (Zappin Beep) Applies a beep sound between track passages: ON, OFF. PARENTAL*5 Sets the parental lock to ON or OFF, and edits the passcode (page 39).
*1 When the unit is turned off.
*2 Does not appear in App Remote.
*3 When the tuner is selected.
*4 When the CD or USB is selected.
*5 When the SiriusXM Vehicle Tuner is connected. SOUND:
EQ7 PRESET (page 33) EQ7 SETTING (page 33) POSITION SET F/R POS (Set Front/Rear Position)
(page 34) ADJ POSITION*1 (Adjust Position)
(page 34) SET SW POS*1 (Set Subwoofer Position)
(page 34) BALANCE Adjusts the sound balance: RIGHT-15 CENTER LEFT-15. 36 FADER Adjusts the relative level: FRONT-15 CENTER REAR-15. DM+*2 (page 34) LOUDNESS (Dynamic Loudness) Reinforces bass and treble for clear sound at low volume levels: ON, OFF. ALO (Automatic Level Optimizer) Adjust the playback volume level of all playback sources to the optimum level:
ON, OFF. RB ENH*3 (Rear Bass Enhancer) RBE MODE (Rear Bass Enhancer Mode) Selects the rear bass enhancer mode: 1, 2, 3, OFF. LPF FREQ (Low Pass Filter Frequency) Selects the subwoofer cut-off frequency:
50Hz, 60Hz, 80Hz, 100Hz, 120Hz. LPF SLOP (Low Pass Filter Slope) Selects the LPF slope: 1, 2, 3. SW DIREC*4 (Subwoofer Direct Connection) SW MODE (Subwoofer Mode) Selects the subwoofer mode: 1, 2, 3, OFF. SW PHASE (Subwoofer Phase) Selects the subwoofer phase: NORM, REV. SW POS*1 (Subwoofer Position)
(page 34) Selects the subwoofer position: NEAR, NORMAL, FAR. LPF FREQ (Low Pass Filter Frequency) Selects the subwoofer cut-off frequency:
50Hz, 60Hz, 80Hz, 100Hz, 120Hz. LPF SLOP (Low Pass Filter Slope) Selects the LPF slope: 1, 2, 3. MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 37 Friday, June 15, 2012 1:02 PM S.WOOFER (Subwoofer) SW LEVEL (Subwoofer Level) Adjusts the subwoofer volume level:
+10 dB 0 dB 10 dB.
(ATT is displayed at the lowest setting.) SW PHASE (Subwoofer Phase) Selects the subwoofer phase: NORM, REV. SW POS*1 (Subwoofer Position) Selects the subwoofer position: NEAR, NORMAL, FAR. LPF FREQ (Low Pass Filter Frequency) Selects the subwoofer cut-off frequency:
50Hz, 60Hz, 80Hz, 100Hz, 120Hz. LPF SLOP (Low Pass Filter Slope) Selects the LPF slope: 1, 2, 3. HPF (High Pass Filter) HPF FREQ (High Pass Filter Frequency) Selects the front/rear speaker cut-off frequency: OFF, 50Hz, 60Hz, 80Hz, 100Hz, 120Hz. HPF SLOP (High Pass Filter Slope) Selects the HPF slope (effective only when HPF FREQ is set to other than OFF): 1, 2, 3. AUX VOL*5 (AUX Volume Level) Adjusts the volume level for each connected auxiliary equipment:
+18 dB 0 dB 8 dB. This setting negates the need to adjust the volume level between sources. BTA VOL (Bluetooth Audio Volume Level)*6 (page 29)
*1 Does not appear when SET F/R POS is set to OFF.
*2 Does not appear when the tuner is selected.
*3 When SW DIREC is set to OFF.
*4 When RBE MODE is set to OFF.
*5 When the AUX is selected.
*6 When Bluetooth audio source is activated. DISPLAY:
DEMO (Demonstration) Activates the demonstration: ON, OFF. DIMMER Changes the display brightness. AT: to dim the display automatically when you turn lights on. (Available only when the illumination control lead is connected.) ON: to dim the display. OFF: deactivate the dimmer. COLOR (Preset Color) Selects the preset color of the display and buttons on the main unit (page 20). CUSTOM-C (Custom Color) Selects a preset color as a basis for further customizing (page 21). SND SYNC Selects the color with sound synchronization: ON, OFF
(page 21). WHT MENU Sets the effect when the source is switched: ON, OFF (page 21). START-WHT Sets the start up color: ON, OFF
(page 22). AUTO SCR* (Auto Scroll) Scrolls long items automatically: ON, OFF. M.DISPLAY (Motion Display) SA: to show moving patterns and spectrum analyzer. OFF: to deactivate the Motion Display.
* When the CD or USB is selected. BT (Bluetooth):
For details on setup items for the Bluetooth settings, see page 23. 37 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 38 Friday, June 15, 2012 1:02 PM APP REM:
Start establishing App Remote. 38 Using optional equipment Auxiliary audio equipment By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. Connecting the portable audio device 1 Turn off the portable audio device. 2 Turn down the volume on the unit. 3 Connect the portable audio device to the unit with a connecting cord (not supplied)*.
* Be sure to use a straight type plug. Adjusting the volume level Be sure to adjust the volume for each connected audio device before playback. 1 Turn down the volume on the unit. 2 Press repeatedly until AUX appears. 3 Start playback of the portable audio device at a moderate volume. 4 Set your usual listening volume on the unit. 5 Adjust the input level (page 37). MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 39 Friday, June 15, 2012 1:02 PM SiriusXM Vehicle Tuner Everything worth listening to is on SiriusXM, getting over 130 channels, including the most commercial-free music, plus the best sports, news, talk and entertainment. A SiriusXM Vehicle Tuner
(sold separately) and Subscription are required. For more information, visit www.siriusxm.com. To listen to SiriusXM Satellite Radio, a subscription is required. Activate the SiriusXM Vehicle Tuner using one of the two methods below:
Online: Go to www.siriusxm.com/
activatenow Phone: Call 1-866-635-2349 For SiriusXM activation, the Radio ID is required. Displaying the SiriusXM Radio ID 1 During playback, press enter the browse mode.
(BROWSE) to 2 Rotate the control dial to select the channel 0, then press it. Note To select SIRIUSXM, press beforehand. Selecting channels 1 Press mode.
(BROWSE) to enter the browse 2 Rotate the control dial to select the desired channel, then press it. Selecting channels from categories 1 Press to enter browse mode. 2 Rotate the control dial to select the desired category, then press it. Storing channels 1 While receiving the channel that you want to store, press and hold a number button
( to ) until MEM appears. To receive the stored channel, select SX1, SX2 or SX3 by pressing , then press a number button ( to ). Parental control Some SiriusXM channels contain content that is not suitable for children. You can enable a parental control passcode for these channels. 1 On the GENERAL menu (page 35), rotate the control dial to select PARENTAL, then press it. 2 Rotate the control dial to select LOCK SEL, then press it. 3 Rotate the control dial to select LOCK-
ON, then press it. To unblock the channels, select OFF in step 3, then enter the passcode. The initial passcode is 0000. Changing the passcode 1 On the GENERAL menu (page 35), rotate the control dial to select PARENTAL, then press it. 2 Rotate the control dial to select CODE EDIT, then press it. 3 On the current passcode input display, enter the current passcode, then press the control dial. The initial passcode is 0000. 4 On the new passcode input display, enter your new 4-digit passcode, then press the control dial. Changing display items Press . 39 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 40 Friday, June 15, 2012 1:02 PM Discs that this unit CANNOT play Additional Information Precautions Discs with labels, stickers, or sticky tape or paper attached. Doing so may cause a malfunction, or may ruin the disc. Discs with non-standard shapes (e.g., heart, square, star). Attempting to do so may damage the unit. 8 cm (3 1/4 in) discs. Notes on CD-R/CD-RW discs The maximum number of: (CD-R/CD-RW only) folders (albums): 150 (including root folder) files (tracks) and folders: 300 (may less than 300 if folder/file names contain many characters) displayable characters for a folder/file name:
32 (Joliet)/64 (Romeo) If the multi-session disc begins with a CD-
DA session, it is recognized as a CD-DA disc, and other sessions are not played back. Discs that this unit CANNOT play CD-R/CD-RW of poor recording quality. CD-R/CD-RW recorded with an incompatible recording device. CD-R/CD-RW which is finalized incorrectly. CD-R/CD-RW other than those recorded in music CD format or MP3 format conforming to ISO9660 Level 1/Level 2, Joliet/Romeo or multi-session. Playback order of MP3/WMA/
AAC files MP3/WMA/AAC Folder
(album) MP3/WMA/
AAC file (track) Cool off the unit beforehand if your car has been parked in direct sunlight. Do not leave the front panel or audio devices brought in inside the car, or it may cause malfunction due to high temperature in direct sunlight. Power antenna (aerial) extends automatically. Moisture condensation Should moisture condensation occur inside the unit, remove the disc and wait for about an hour for it to dry out; otherwise the unit will not operate properly. To maintain high sound quality Do not splash liquid onto the unit or discs. Notes on discs Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight. Before playing, wipe the discs with a cleaning cloth from the center out. Do not use solvents such as benzine, thinner, commercially available cleaners. This unit is designed to play back discs that conform to the Compact Disc (CD) standard. DualDiscs and some of the music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard, therefore, these discs may not be playable by this unit. 40 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 41 Friday, June 15, 2012 1:02 PM About iPod You can connect to the following iPod models. Update your iPod devices to the latest software before use. Made for iPod touch (4th generation) iPod touch (3rd generation) iPod touch (2nd generation) iPod classic iPod nano (6th generation) iPod nano (5th generation) iPod nano (4th generation) iPod nano (3rd generation) iPod nano (2nd generation) iPod nano (1st generation)*
iPhone 4S iPhone 4 iPhone 3GS iPhone 3G
* Passenger control is not available for iPod nano
(1st generation). Made for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. About Bluetooth function What is Bluetooth technology?
Bluetooth wireless technology is a short-
range wireless technology that enables wireless data communication between digital devices, such as a cellular phone and a headset. Bluetooth wireless technology operates within a range of about 10 m (about 33 feet). Connecting two devices is common, but some devices can be connected to multiple devices at the same time. You do not need to use a cable for connection since Bluetooth technology is a wireless technology, neither is it necessary for the devices to face one another, such is the case with infrared technology. For example, you can use such a device in a bag or pocket. Bluetooth technology is an international standard supported by millions of companies all over the world, and employed by various companies worldwide. On Bluetooth communication Bluetooth wireless technology operates within a range of about 10 m. Maximum communication range may vary depending on obstacles (person, metal, wall, etc.) or electromagnetic environment. The following conditions may affect the sensitivity of Bluetooth communication. There is an obstacle such as a person, metal, or wall between this unit and Bluetooth device. A device using 2.4 GHz frequency, such as a wireless LAN device, cordless telephone, or microwave oven, is in use near this unit. Because Bluetooth devices and wireless LAN
(IEEE802.11b/g) use the same frequency, microwave interference may occur and result in communication speed deterioration, noise, or invalid connection if this unit is used near a wireless LAN device. In such as case, perform the following. Use this unit at least 10 m away from the wireless LAN device. If this unit is used within 10 m of a wireless LAN device, turn off the wireless LAN device. Install this unit and Bluetooth device as near to each other as possible. Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices. Turn off this unit and other Bluetooth devices in the following locations, as it may cause an accident. where inflammable gas is present, in a hospital, train, airplane, or petrol station near automatic doors or a fire alarm 41 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 42 Friday, June 15, 2012 1:02 PM Depending on the device to be connected, it Be sure to observe the correct polarity when This unit supports security capabilities that comply with the Bluetooth standard to provide a secure connection when the Bluetooth wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using Bluetooth wireless technology. We do not take any responsibility for the leakage of information during Bluetooth communication. Connection with all Bluetooth devices cannot be guaranteed. A device featuring Bluetooth function is required to conform to the Bluetooth standard specified by Bluetooth SIG, and be authenticated. Even if the connected device conforms to the above mentioned Bluetooth standard, some devices may not be connected or work correctly, depending on the features or specifications of the device. While talking on the phone hands free, noise may occur, depending on the device or communication environment. may require some time to start communication. Others Using the Bluetooth device may not function on cellular phones, depending on radio wave conditions and location where the equipment is being used. If you experience discomfort after using the Bluetooth device, stop using the Bluetooth device immediately. Should any problem persist, consult your nearest Sony dealer. If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer. 42 Maintenance Replacing the lithium battery of the remote commander When the battery becomes weak, the range of the remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery. Use of any other battery may present a risk of fire or explosion.
+ side up Notes on the lithium battery Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. Wipe the battery with a dry cloth to assure a good contact. installing the battery. Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur. WARNING Battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire. Cleaning the connectors The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 7) and clean the connectors with a cotton swab. Do not apply too much force. Otherwise, the connectors may be damaged. MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 43 Friday, June 15, 2012 1:02 PM Notes For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch. Never touch the connectors directly with your fingers or with any metal device. Specifications FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC. POUR LES CONSOMMATEURS AUX TATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUBEC. AUDIO POWER SPECIFICATIONS CEA2006 Standard Power Output: 17 Watts RMS 4 at 4 Ohms < 1% THD+N SN Ratio: 80 dBA
(reference: 1 Watt into 4 Ohms) Tuner section FM Tuning range: 87.5 107.9 MHz Antenna (aerial) terminal:
External antenna (aerial) connector Intermediate frequency: 25 kHz Usable sensitivity: 8 dBf Selectivity: 75 dB at 400 kHz Signal-to-noise ratio: 80 dB (stereo) Separation: 50 dB at 1 kHz Frequency response: 20 15,000 Hz AM Tuning range: 530 1,710 kHz Antenna (aerial) terminal:
External antenna (aerial) connector Intermediate frequency:
9,115 kHz or 9,125 kHz/5 kHz Sensitivity: 26 V CD Player section Signal-to-noise ratio: 120 dB Frequency response: 10 20,000 Hz Wow and flutter: Below measurable limit USB Player section Interface: USB (Full-speed) Maximum current: 1 A Wireless Communication Communication System:
Bluetooth Standard version 2.1 + EDR Output:
Bluetooth Standard Power Class 2 (Max. +4 dBm) Maximum communication range:
Line of sight approx. 10 m (33 ft)*1 Frequency band:
2.4 GHz band (2.4000 2.4835 GHz) Modulation method: FHSS Compatible Bluetooth Profiles*2:
A2DP (Advanced Audio Distribution Profile) 1.2 AVRCP (Audio Video Remote Control Profile) 1.3 HFP (Handsfree Profile) 1.5 PBAP (Phone Book Access Profile) OPP (Object Push Profile) SPP (Serial Port Profile)
*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna
(aerial)s performance, operating system, software application, etc.
*2 Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices. Power amplifier section Output: Speaker outputs Speaker impedance: 4 8 ohms Maximum power output: 52 W 4 (at 4 ohms) General Outputs:
Inputs:
Audio outputs terminal (front, rear, sub) Power antenna (aerial)/Power amplifier control terminal (REM OUT) SiriusXM input terminal Remote controller input terminal Antenna (aerial) input terminal MIC input terminal AUX input jack (stereo mini jack) USB port Power requirements: 12 V DC car battery
(negative ground (earth)) Dimensions: Approx. 178 50 177 mm
(7 1/8 2 7 in) (w/h/d) 43 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 44 Friday, June 15, 2012 1:02 PM Mounting dimensions: Approx. 182 53 160 mm
(7 1/4 2 1/8 6 5/16 in) (w/h/d) Mass: Approx. 1.2 kg (2 lb 11 oz) Supplied accessories:
Remote commander: RM-X231 Microphone Parts for installation and connections (1 set) Optional accessories/equipment:
USB connection cable for iPod: RC-100IP SiriusXM Vehicle Tuner: SXV100 Your dealer may not handle some of the above listed accessories. Please ask the dealer for detailed information. Design and specifications are subject to change without notice. 44 Troubleshooting The following checklist will help you remedy problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. For details on using the fuse and removing the unit from the dashboard, refer to the installation/connections manual supplied with this unit. If the problem is not solved, visit the support site on the back cover. General No power is being supplied to the unit.
Check the connection or fuse.
If the unit is turned off and the display disappears, the unit cannot be operated with the remote commander. Turn on the unit. The power antenna (aerial) does not extend.
The power antenna (aerial) does not have a relay box. No sound.
The ATT function is activated.
The position of the fader control FADER is not set for a 2-speaker system. No beep sound.
The beep sound is canceled (page 35).
An optional power amplifier is connected and you are not using the built-in amplifier. The contents of the memory have been erased.
The power supply lead or battery has been disconnected or not connected properly.
The unit is reset. Store again in the memory. Stored stations and correct time are erased. The fuse has blown. Makes noise when the position of the ignition is switched.
The leads are not matched correctly with the cars accessory power connector. MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 45 Friday, June 15, 2012 1:02 PM During playback or reception, demonstration mode starts.
If no operation is performed for 5 minutes with DEMO-ON set, demonstration mode starts. Set DEMO-OFF (page 37). The display disappears from/does not appear in the display window.
The dimmer is set to DIM-ON (page 37).
The display disappears if you press and hold
. Press on the unit until the display appears.
The connectors are dirty (page 42). The Auto Off function does not operate.
The unit is turned on. The Auto Off function activates after turning off the unit. Turn off the unit. The operation buttons do not function. The disc will not eject.
Press and
(BACK)/ for more than 2 seconds. The contents stored in memory are erased. For your safety, do not perform the reset operation while you are driving. Radio reception The stations cannot be received. The sound is hampered by noises.
The connection is not correct. Connect an REM OUT lead (blue/white striped) or accessory power supply lead (red) to the power supply lead of a cars antenna
(aerial) booster (only when your car has built-in radio antenna (aerial) in the rear/
side glass). Check the connection of the car antenna
(aerial). If the auto antenna (aerial) will not go up, check the connection of the power antenna
(aerial) control lead. Preset tuning is not possible.
Store the correct frequency in the memory.
The broadcast signal is too weak. Automatic tuning is not possible.
The broadcast signal is too weak. Perform manual tuning. RDS PTY displays - - - - - - - -.
The current station is not an RDS station.
RDS data has not been received.
The station does not specify the program type. CD playback The disc cannot be loaded.
Another disc is already loaded.
The disc has been forcibly inserted upside down or in the wrong way. The disc does not play back.
Defective or dirty disc.
The CD-Rs/CD-RWs are not for audio use
(page 40). MP3/WMA/AAC files cannot be played back.
The disc is incompatible with the MP3/WMA/
AAC format and version. For details on playable discs and formats, visit the support site. MP3/WMA/AAC files take longer to play back than others.
The following discs take a longer time to start playback. A disc recorded with a complicated tree structure. A disc recorded in Multi Session. A disc to which data can be added. The display items do not scroll.
For discs with very many characters, those may not scroll.
AUTO SCR is set to OFF. Set A.SCRL-ON (page 37). Press and hold (SCRL). The sound skips.
Installation is not correct. Install the unit at an angle of less than 45 in a sturdy part of the car.
Defective or dirty disc. 45 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 46 Friday, June 15, 2012 1:02 PM USB playback You cannot play back items via a USB hub.
This unit cannot recognize USB devices via a USB hub. Cannot play back items.
A USB device does not work. Connect it again. A USB device takes longer to play back.
The USB device contains files with a complicated tree structure. The sound is intermittent.
The sound may be intermittent at a high-bit-
rate of more than 320 kbps. Pandora connection is not possible.
Shut down Pandora application on the mobile device, and then launch again. Application name is mismatched with the actual application in App Remote.
Launch the application again from the App Remote application. Bluetooth function The connecting device cannot detect this unit.
Before the pairing is made, set this unit to pairing standby mode.
While connected to a Bluetooth device, this unit cannot be detected from another device. Disconnect the current connection and search for this unit from another device.
When the device pairing is made, set the Bluetooth signal output to on (page 24, 25). Connection is not possible.
The connection is controlled from one side
(this unit or Bluetooth device), but not both. Connect to this unit from a Bluetooth device or vice versa.
Check the pairing and connection procedures in the manual of the other device, etc., and perform the operation again. 46 The name of the detected device does not appear.
Depending on the status of the other device, it may not be possible to obtain the name. No ringtone.
Adjust the volume by rotating the control dial while receiving a call.
Depending on the connecting device, the ringtone may not be sent properly. Set RINGTONE to 1 (page 23). The talkers voice volume is low.
Adjust the volume level. A call partner says that the volume is too low or high.
Adjust the volume accordingly using mic gain adjustment (page 27). Echo or noise occurs in phone call conversations.
Lower the volume.
Set EC/NC Mode to EC/NC-1 or EC/NC-2
(page 27).
If the ambient noise other than the phone call sound is loud, try reducing this noise. E.g.: If a window is open and road noise, etc., is loud, shut the window. If an air conditioner is loud, lower the air conditioner. The phone is not connected.
When Bluetooth audio is played, the phone is not connected even if you press . Connect from the phone. The phone sound quality is poor.
Phone sound quality depends on reception conditions of cellular phone. Move your car to a place where you can enhance the cellular phones signal if the reception is poor. The volume of the connected audio device is low (high).
Volume level will differ depending on the audio device. Adjust the volume of the connected audio device or this unit. MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 47 Friday, June 15, 2012 1:02 PM No sound is heard from the Bluetooth audio device.
The audio device is paused. Cancel pause of the audio device. The sound skips during playback of a Bluetooth audio device.
Reduce the distance between the unit and the Bluetooth audio device.
If the Bluetooth audio device is stored in a case which interrupts the signal, remove the audio device from the case during use.
Several Bluetooth devices or other devices which emit radio waves are in use nearby. Turn off the other devices. Increase the distance from the other devices.
The playback sound stops momentarily when the connection between this unit and the cellular phone is being made. This is not a malfunction. The connected Bluetooth audio device cannot be controlled.
Check that the connected Bluetooth audio device supports AVRCP. Some functions do not work.
Check if the connecting device supports the functions in question. The name of the other party does not appear when a call is received.
The calling phone is not set to send the phone number. A call is answered unintentionally.
The connecting phone is set to answer a call automatically.
AUTO ANS of this unit is set to ANS-1 or ANS-2 (page 23). Pairing failed due to time out.
Depending on the connecting device, the time limit for pairing may be short. Try completing the pairing within the time. Bluetooth function cannot operate.
Turn off the unit by pressing for more than 2 seconds, then turn the unit on again. No sound is output from the car speakers during handsfree call.
If the sound is output from the cellular phone, set the cellular phone to output the sound from the car speakers. Pandora connection is not possible.
Shut down the Pandora application on the mobile device, and then launch again. Application name is mismatched with the actual application in App Remote.
Launch the application again from the App Remote application. Error displays/Messages CHECKING
The unit is confirming the connection of a USB device. Wait until confirming the connection is finished. ERROR
The disc is dirty or inserted upside down. Clean or insert the disc correctly.
A blank disc has been inserted.
The disc cannot play due to a problem. Insert another disc.
USB device was not automatically recognized. Connect it again.
Press to remove the disc. FAILURE
The connection of speakers/amplifiers is incorrect. See the installation/connections manual of this model to check the connection. HUB NO SUPRT (Hubs Not Supported)
USB hub is not supported on this unit. NO DEV (No Device)
USB is selected as source without a USB device connected. A USB device or a USB cable has been disconnected during playback. Be sure to connect a USB device and USB cable. 47 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 48 Friday, June 15, 2012 1:02 PM NO DISC
The disc is ejected, or CD is selected as the source without inserting the disc. NO MUSIC
The disc or USB device does not contain a music file. Insert a music CD in this unit. Connect a USB device with a music file in it. NO NAME
A disc/album/artist/track name is not written in the track. NOT FOUND
There is no item beginning with the selected letter in Alphabet search. OFFSET
There may be an internal malfunction. Check the connection. If the error indication remains on in the display, consult your nearest Sony dealer. OVERLOAD
USB device is overloaded. Disconnect the USB device, then change the source by pressing . Indicates that the USB device is out of order, or an unsupported device is connected. PUSH EJT (Push Eject)
The disc cannot be ejected. Press (eject) (page 9). READ
The unit is reading all track and album information on the disc. Wait until reading is complete and playback starts automatically. Depending on the disc structure, it may take more than a minute. USB NO SUPRT (USB Not Supported)
The connected USB device is not supported. For details on the compatibility of your USB device, visit the support site.
During reverse or fast-forward, you have or reached the beginning or the end of the disc and you cannot go any further. 48
The character cannot be displayed with the unit. For Bluetooth function:
BT BUSY (Bluetooth Busy)
The phonebook and the call history of the cellular phone are not accessible from this unit. Wait for a while, and then try again. EMPTY
The call history is empty. ERROR
BT Initialize failed.
Phonebook access failed.
Phonebook content was changed while accessing the cellular phone. Access the phonebook in the cellular phone again. MEM FAILURE (Memory Failure)
This unit failed to store the contact in the preset dial. Make sure that the number you intend to store is correct (page 28). MEMORY BUSY
This unit is storing data. Wait until storing has finished. NO DEV (No Device)
Bluetooth audio source is selected without a Bluetooth audio device connected. A Bluetooth audio device has been disconnected during a call. Be sure to connect a Bluetooth audio device.
Bluetooth phone source is selected without a cellular phone connected. A cellular phone has been disconnected during a call. Be sure to connect a cellular phone. NO INFO (No Information)
Network name and cellular phone name are not received with cellular phone connected. P (preset number) EMPTY
The preset dial is empty. MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Right 000COV.book Page 49 Friday, June 15, 2012 1:02 PM UNKNOWN
Name or phone number cannot be displayed when browsing phonebook or call history. WITHHELD
Phone number is hidden by caller. For App Remote operation:
APP -------- (Application)
Connection with the application is not made. Establish iPhone/Android phone connection again. APP MENU (Application Menu)
Button operation cannot be performed while a menu on iPhone/Android phone is open. Exit the menu on iPhone/Android phone. APP NO DEV (Application No Device)
The device with the application installed is not connected. Connect the device, then establish iPhone/
Android phone connection. OPEN APP (Open Application)
The App Remote application is not running. Start up the iPhones application. For Pandora internet radio operation:
CANNOT SKIP
Skipping tracks on Pandora is not allowed. Wait until the commercial ends. Pandora limits the number of skips allowed on their service. Wait until the next track begins, or select another station on the list. CHK DEV (Check Device)
Pandora does not start up. Start up the Pandora application and log into your account. ERROR
Thumbs feedback failed. Try Thumbs Up/Down again.
Bookmarking failed. Try bookmarking again. NOT ALLOWED
Thumbs feedback is not allowed. Wait until the commercial ends. Some functions, such as Shared Station, do not permit feedback. Wait until the next track begins, or select another station on the list.
Bookmark is not allowed. Wait until the commercial ends. Select another track or station, then try it again. NO STATION
There is no station on your Pandora account. Create the station on the mobile device. OPEN APP (Open Application)
Pandora does not start up. Start up the Pandora application on the mobile device, then press (PAUSE). PAN NO SUPRT (Pandora Not Supported)
The connected device is not supported. For details on the compatibility of the device, visit the support site. For SiriusXM operation:
CH LOCKD (Channel Locked)
The selected channel is locked by the parental control function. CH UNAVL (Channel Unavailable)
The selected channel is not available.
The active channel has become unavailable. CH UNSUB (Channel Unsubscribed)
There is no subscription to the selected channel.
The subscription to the active channel has been terminated. CHEK ANT (Check Antenna)
The antenna (aerial) is not being used properly. Make sure the antenna (aerial) is connected and being used properly. CHK TUNR (Check Tuner)
The SiriusXM Vehicle Tuner is not functioning properly. Disconnect the SiriusXM Vehicle Tuner, and connect it again. 49 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Left 000COV.book Page 50 Friday, June 15, 2012 1:02 PM CODE ERROR
Passcode inputs failed. MEM FAILURE (Memory Failure)
This unit failed to store the channel in the preset dial. Make sure that the channel you intend to store is correct. NOSIGNAL (No Signal)
The service is stopped due to a signal interruption. SUBSCRIPTION UPDATE - ENTER TO CONTINUE
Your subscription has been updated. Press . If these solutions do not help improve the situation, consult your nearest Sony dealer. If you take the unit to be repaired because of CD playback trouble, bring the disc that was used at the time the problem began. 50 MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\040CD.fm masterpage:Blank 000COV.book Page 51 Friday, June 15, 2012 1:02 PM MEX-BT4100P 4-427-802-11(1) E:\DATA\4427802111\4427802111MEXBT4100PUC\01GB-MEXBT4100PUC\050BCO.fm masaterpage:Left 000COV.book Page 52 Friday, June 15, 2012 1:02 PM http://esupport.sony.com http://www.sony.com/caraudio http://www.SONY.com http://www.sony.net/
2012 Sony Corporation Printed in Thailand MEX-BT4100P 4-427-802-11(1)
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-08-20 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2012-08-20
|
||||
1 | Applicant's complete, legal business name |
Sony Corporation
|
||||
1 | FCC Registration Number (FRN) |
0003739166
|
||||
1 | Physical Address |
1-7-1 Konan
|
||||
1 |
Tokyo, N/A 108-0075
|
|||||
1 |
Japan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
e******@ul.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
AK8
|
||||
1 | Equipment Product Code |
MEXBT4100
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
R****** T****
|
||||
1 | Title |
Senior Manager
|
||||
1 | Telephone Number |
81-50********
|
||||
1 | Fax Number |
81-50********
|
||||
1 |
c******@jp.sony.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
UL Japan, Inc.
|
||||
1 | Name |
T******** I********
|
||||
1 | Physical Address |
1-22-3, Megumigaoka, Hiratsuka-shi
|
||||
1 |
Kanagawa-ken, 259-1220
|
|||||
1 |
Japan
|
|||||
1 | Telephone Number |
81-46********
|
||||
1 | Fax Number |
81-46********
|
||||
1 |
T******@ul.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/19/2012 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Bluetooth Audio System | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power Output listed is Conducted. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
UL Japan, Inc. Shonan EMC EMC Lab.
|
||||
1 | Name |
T******** H******
|
||||
1 | Telephone Number |
+81-5********
|
||||
1 | Fax Number |
+81 5********
|
||||
1 |
T******@jp.ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0015000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC