all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
(Short-Term Confidential) User Manual MEX-N6000BH | Users Manual | 5.36 MiB | ||||
1 | External Photos | |||||||
1 | Test Setup Photos | |||||||
1 | Internal Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | RF Exposure Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Report | |||||||
1 | Cover Letter(s) | |||||||
1 | ID Label/Location Info | |||||||
1 | ID Label/Location Info |
1 | (Short-Term Confidential) User Manual MEX-N6000BH | Users Manual | 5.36 MiB |
M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\010COV.fm masterpage: Cover ML.book Page 1 Friday, March 14, 2014 9:35 AM 4-489-692-11(1) Bluetooth Audio System Operating Instructions GB Manual de instrucciones ES Owners Record The model and serial numbers are located on the bottom of the unit. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. Serial No. To cancel the demonstration (DEMO) display, see page 18. Para cancelar la pantalla de demostracin (DEMO), consulte la pgina 19. MEX-N6000BH/MEX-GS810BH MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\020INT.fm masterpage: Left ML.book Page 2 Friday, March 14, 2014 9:35 AM
(MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person's body. CAUTION The use of optical instruments with this product will increase eye hazard. For the State of California, USA only Perchlorate Material special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Note on the lithium battery Do not expose the battery to excessive heat such as direct sunlight, fire or the like. Warning if your cars ignition has no ACC position Be sure to set the AUTO OFF function (page 18). The unit will shut off completely and automatically in the set time after the unit is turned off, which prevents battery drain. If you do not set the AUTO OFF function, press and hold OFF until the display disappears each time you turn the ignition off. Be sure to install this unit in the dashboard of the car for safety. For installation and connections, see the supplied installation/connections manual. The nameplate indicating operating voltage, etc., is located on the bottom of the chassis. Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency
(RF) Exposure Guidelines. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation 2GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\020INT.fm masterpage: Right ML.book Page 3 Friday, March 14, 2014 9:35 AM Remember, in order to make or receive calls, the handsfree and the electronic device connected to the handsfree must be switched on in a service area with adequate cellular signal strength. Emergency calls may not be possible on all cellular phone networks or when certain network services and/or phone features are in use. Check with your local service provider. Notes on BLUETOOTH function Caution IN NO EVENT SHALL SONY BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASERS TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE. IMPORTANT NOTICE!
Safe and efficient use Changes or modifications to this unit not expressly approved by Sony may void the users authority to operate the equipment. Please check for exceptions, due to national requirement or limitations, in usage of BLUETOOTH equipment before using this product. Driving Check the laws and regulations on the use of cellular phones and handsfree equipment in the areas where you drive. Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions so require. Connecting to other devices When connecting to any other device, please read its user guide for detailed safety instructions. Radio frequency exposure RF signals may affect improperly installed or inadequately shielded electronic systems in cars, such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems or air bag systems. For installation or service of this device, please consult with the manufacturer or its representative of your car. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to this device. Consult with the manufacturer of your car to ensure that the use of your cellular phone in the car will not affect its electronic system. Check regularly that all wireless device equipment in your car is mounted and operating properly. Emergency calls This BLUETOOTH car handsfree and the electronic device connected to the handsfree operate using radio signals, cellular, and landline networks as well as user-programmed function, which cannot guarantee connection under all conditions. Therefore do not rely solely upon any electronic device for essential communications (such as medical emergencies). 3GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\030TOC.fm masterpage: Left ML.book Page 4 Friday, March 14, 2014 9:35 AM DISPLAY Setup . 20 COLOR (preset color - dynamic color illuminator) . 20 CUSTOM-C (custom color) . 20 SND SYNC (sound synchronization) . 20 WHT MENU (white menu) . 20 START-WHT (start white) . 20 BT (BLUETOOTH) Setup . 20 BT INIT (BLUETOOTH initialize). 20 APP REM (App Remote) Setup . 20 Additional Information Precautions . 21 Maintenance . 23 Specifications . 23 Troubleshooting . 25 Table of Contents Warning . 2 Guide to Parts and Controls . 5 Getting Started Detaching the Front Panel . 6 Setting the Clock . 6 Preparing a BLUETOOTH Device. 7 Connecting an iPod/USB Device . 8 Connecting Other Portable Audio Device . 9 Listening to the Radio/SiriusXM Listening to the Radio. 9 Storing and Receiving Stations . 9 Listening to the SiriusXM Satellite Radio . 10 iTunes Tagging . 11 Playback Playing a Disc . 12 Playing an iPod/USB Device. 12 Playing a BLUETOOTH Device. 12 Searching and Playing Tracks. 13 Listening to Pandora Preparing for Pandora. 14 Streaming Pandora . 14 Available Operations in the Pandora . 14 Handsfree Calling Receiving a Call . 15 Making a Call . 15 Available Operations during Call . 16 Useful Functions App Remote with iPhone/Android Phone . 16 Settings Canceling the DEMO Mode . 18 Basic Setting Operation . 18 GENERAL Setup . 18 SOUND Setup. 18 EQ10 PRESET . 18 EQ10 SETTING . 18 POSITION (listening position). 19 RB ENH (rear bass enhancer) . 19 SW DIREC (subwoofer direct connection) . 19 4GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Right ML.book Page 5 Friday, March 14, 2014 9:35 AM Guide to Parts and Controls Main unit The number 3/
(browse) (page 13, 14)
(repeat) button has a tactile dot. Enter the browse mode during playback. Front panel release button SEEK +/
Tune in radio stations automatically. Press and hold to tune manually.
/ (prev/next)
/ (fast-reverse/fast-forward) Control dial Rotate to adjust the volume. ENTER Enter the selected item. Press SRC, rotate then press to change the source. VOICE (page 16) Activate voice dial. When the App Remote function is on, the voice recognition is activated (Android phone only).
-APP Press and hold for more than 2 seconds to establish App Remote function (connection). N-Mark Touch the control dial with Android phone to make BLUETOOTH connection. Receptor for the remote commander Disc slot Display window
(disc eject) SRC (source) Turn on the power. Change the source.
-OFF Press and hold for 1 second to turn off the power. Press and hold for more than 2 seconds to turn off the power and the display. If the unit is turned off and the display disappears, it is unable you to operate with the remote.
(back) Return to the previous display. MODE (page 9, 12, 14, 16) CALL Enter the call menu. Receive/end a call. Press and hold more than 2 seconds to switch the BLUETOOTH signal. MENU Open the setup menu.
-DSPL (display) Press and hold, then press to change display items. Number buttons (1 to 6) Receive stored radio stations. Press and hold to store stations. Call a stored phone number. Press and hold to store a phone number. ALBUM /
Skip an album for audio device. Press and hold to skip albums continuously. Press to thumbs up, or to thumbs down in Pandora (page 14).
(repeat)
(shuffle) MIC (page 16) 5GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Left ML.book Page 6 Friday, March 14, 2014 9:35 AM PAUSE TAG Retrieve song information broadcast on a SiriusXM or HD Radio station.
-CAT (category) Press and hold to enter the category browse mode. AUX input jack USB port RM-X231 Remote Getting Started Detaching the Front Panel You can detach the front panel of this unit to prevent theft. 1 Press and hold OFF . The unit is turned off. 2 Press the front panel release button , then remove the panel by pulling it towards you.
* This button cannot be used for MEX-N6000BH/MEX-
GS810BH. The VOL (volume) + button has a tactile dot. Remove the insulation film before use.
()/ () VOL (Volume) +/
SOUND Open the SOUND menu directly.
-MENU Press and hold to open the setup menu.
(+)/ () DSPL (display)/-SCRL(scroll) Change display items. Press and hold to scroll a display item. 6GB Caution alarm If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used. Serial numbers Make sure the serial numbers on the bottom of the unit and the back of the front panel are matched correctly. Otherwise you cannot make BLUETOOTH pairing, connection and disconnection by NFC. Attaching the front panel Setting the Clock 1 Press MENU, rotate the control dial to select [GENERAL], then press it. 2 Rotate the control dial to select [CLOCK-
ADJ], then press it. The hour indication flashes. MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Right ML.book Page 7 Friday, March 14, 2014 9:35 AM 3 Rotate the control dial to set the hour and minute. To move the digital indication, press SEEK +/. 4 After setting the minute, press MENU. The setup is complete and the clock starts. To display the clock, press DSPL. Preparing a BLUETOOTH Device You can enjoy music, or perform handsfree calling, by connecting a suitable BLUETOOTH device. For details on connecting, refer to the operating instructions supplied with the device. Before connecting the device, turn down the volume of this unit; otherwise, loud sound may result. Pairing and connecting with a BLUETOOTH device When connecting a BLUETOOTH device (cellular phone, audio device, etc.) for the first time, mutual registration (called pairing) is required. Pairing enables this unit and other devices to recognize each other. 1 Place the BLUETOOTH device within 1 m
(3 ft) of this unit. 2 Press CALL, rotate the control dial to select [PAIRING], then press it. flashes. The unit enters pairing standby mode. 3 Perform pairing on the BLUETOOTH device so it detects this unit. 4 Select [Sony Car Audio] shown in the display of the BLUETOOTH device. If [Sony Car Audio] does not appear, repeat from step 2. 5 If passkey* input is required on the BLUETOOTH device, input [0000].
* Passkey may be called Passcode, PIN code, PIN number or Password, etc., depending on the device. Input passkey
[0000]
When pairing is made, stays lit. 6 Select this unit on the BLUETOOTH device to establish the BLUETOOTH connection. or made. lights up when the connection is Note While connecting to a BLUETOOTH device, this unit cannot be detected from another device. To enable detection, enter the pairing mode and search for this unit from another device. To cancel pairing Perform step 2 to cancel the pairing mode after this unit and the BLUETOOTH device are paired. Connecting with a paired BLUETOOTH device To use a paired device, connection with this unit is required. Some paired devices will connect automatically. 1 Press CALL, rotate the control dial to select [BT SIGNL], then press it. Make sure that lights up. 2 Activate the BLUETOOTH function on the BLUETOOTH device. 3 Operate the BLUETOOTH device to connect to this unit. or lights up. Icons in the display:
Lights up when a cellular phone is connected to the unit. Lights up when an audio device is connected to the unit. Indicates the signal strength status of connected cellular phone. 7GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Left ML.book Page 8 Friday, March 14, 2014 9:35 AM To disconnect by One touch Touch the N-Mark part of the unit with the N-Mark part of the smartphone again. Notes When making the connection, handle the smartphone carefully to prevent scratches. One touch connection is not possible when the unit is already connected to another NFC compatible device. In this case, disconnect the other device, and make connection with the smartphone again. Connecting with an iPhone/iPod
(BLUETOOTH Auto Pairing) When an iPhone/iPod with iOS5 or later installed is connected to the USB port, the unit is paired and connected with the iPhone/iPod automatically. To enable BLUETOOTH Auto Pairing, make sure
[AUTO PAIRING] in BT setup is set to [ON] (page 20). 1 Activate the BLUETOOTH function on the iPhone/iPod. 2 Connect an iPhone/iPod to the USB port. Make sure that unit. lights up on the display of the Note BLUETOOTH Auto Pairing is not possible if the unit is already connected to another BLUETOOTH device. In this case, disconnect the other device, then connect the iPhone/iPod again. Connecting an iPod/USB Device 1 Turn down the volume on the unit. 2 Connect the iPod/USB device to the unit. To connect an iPod/iPhone, use the USB connection cable for iPod (not supplied). When connecting iPhone 5 To connect the last-connected device from this unit Activate the BLUETOOTH function on the BLUETOOTH device. Press SRC. Select [BT PHONE] or [BT AUDIO]. Press ENTER to connect with the cellular phone, or PAUSE to connect with the audio device. Note While streaming BLUETOOTH audio, you cannot connect from this unit to the cellular phone. Connect from the cellular phone to this unit instead. Tip With BLUETOOTH signal on: when the ignition is turned to on, this unit reconnects automatically to the last-
connected cellular phone. To install the microphone For details on how to connect the microphone, refer to the supplied Installation/Connections guide. Connecting with a Smartphone by One touch (NFC) By touching the control dial on the unit with an NFC* compatible smartphone, the unit is paired and connected with the smartphone automatically.
* NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as mobile phones and IC tags. Thanks to the NFC function, data communication can be achieved easily just by touching the relevant symbol or designated location on NFC compatible devices. For a smartphone with Android OS 4.0 or lower installed, downloading the app NFC Easy Connect available at Google Play is required. The app may not be downloadable in some countries/regions. 1 Activate the NFC function on the smartphone. For details, refer to the operating instructions supplied with the smartphone. 2 Touch the N-Mark part of the unit with the N-Mark part of the smartphone. Make sure that unit. lights up on the display of the 8GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Right ML.book Page 9 Friday, March 14, 2014 9:35 AM For MEX-GS810BH, the rear USB port is also available. Connecting Other Portable Audio Device 1 Turn off the portable audio device. 2 Turn down the volume on the unit. 3 Connect the portable audio device to the AUX input jack (stereo mini jack) on the unit with a connecting cord (not supplied)*.
* Be sure to use a straight type plug. 4 Press SRC to select [AUX]. To match the volume level of the connected device to other sources Start playback of the portable audio device at a moderate volume, and set your usual listening volume on the unit. Press MENU and rotate the control dial. Select [SOUND] [AUX VOL] (page 20). Listening to the Radio/SiriusXM Listening to the Radio To listen to the radio, press SRC to select [TUNER]. Program Service Data: Contributes to the superior user experience of HD Radio Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams. Adjacent to traditional main stations are extra local FM channels. These HD2/HD3 Channels provide new, original music as well as deep cuts into traditional genre. Digital, CD-quality sound. HD Radio Technology enables local radio stations to broadcast a clean digital signal. AM sounds like todays FM and FM sounds like a CD. iTunes Tagging provides you the opportunity to discover a wide range of content and the means to tag that content for later review and purchase from the iTunes Store. For more information, visit the following web site:
http://www.hdradio.com/
Storing and Receiving Stations Caution When tuning to stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically (BTM) 1 Press MODE to change the band (FM1, FM2, FM3, AM1 or AM2). 2 Press MENU, rotate the control dial to select [GENERAL], then press it. 3 Rotate the control dial to select [BTM], then press it. The unit stores stations in order of frequency on the number buttons. 9GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Left ML.book Page 10 Friday, March 14, 2014 9:35 AM Tuning 1 Press MODE to change the band (FM1, FM2, FM3, AM1 or AM2). 2 Perform tuning. To tune manually Press and hold SEEK +/ to locate the approximate frequency, then press SEEK +/
repeatedly to fine adjust to the desired frequency. To tune automatically Press SEEK +/. Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. Storing manually 1 While receiving the station that you want to store, press and hold a number button
(1 to 6) until [MEM] appears. Receiving the stored stations 1 Select the band, then press a number button (1 to 6). About FM Multicasting Some FM HD Radio stations provide a main program and supplemental program(s) (up to 7) at the same frequency. Selecting a supplemental program 1 Press SEEK +/. 10GB Listening to the SiriusXM Satellite Radio Activating your SiriusXM Subscription Only SiriusXM brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Connect Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.com After installing your SiriusXM Connect Vehicle Tuner and antenna, press SRC to select [SIRIUSXM]. You should be able to hear the SiriusXM preview channel on Channel 1. After verifying that you can hear the preview channel, select Channel 0 to find the Radio ID of your tuner. In addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner and its packaging. You will need this number to activate your subscription. Write the number down for reference. In the USA, you can activate online or by calling SiriusXM Listener Care:
Online: Visit www.siriusxm.com/activatenow Phone: Call 1-866-635-2349 As part of the activation process, the SiriusXM satellites will send an activation message to your tuner. When your radio detects that the tuner has received the activation message, your radio will display: [SUBSCRIPTION UPDATED - ENTER TO CONTINUE]. Once subscribed, you can tune to channels in your subscription plan. Notes The activation process usually takes 10 to 15 minutes, but may take up to an hour. Your radio will need to be turned on and receiving the SiriusXM signal to receive the activation message. Selecting channels for SiriusXM 1 Press 2 Rotate the control dial to select the
(browse). desired channel, then press it. To select channels from categories 1 Press and hold CAT. 2 Rotate the control dial to select the desired category, then press it. To store channels 1 While receiving the channel that you want to store, press and hold a number button (1 to 6) until [MEM]
appears. MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Right ML.book Page 11 Friday, March 14, 2014 9:35 AM To receive the stored channel, press MODE to select
[SX1], [SX2] or [SX3], then press a number button (1 to 6). To set a parental control The parental control feature allows you to limit access to SiriusXM channels with mature content. When enabled, the parental control feature requires you to enter a passcode to tune to the locked channels. Information on setting up the passcode and locking channels can be found below. 1 Press MENU and rotate the control dial. 2 Select [GENERAL] [PARENTAL]
[LOCK SEL] [LOCK-ON]. 3 Enter the passcode, then press ENTER. The initial passcode is [0000]. To unlock the channels, select [OFF]. To change the passcode 1 Press MENU and rotate the control dial. 2 Select [GENERAL] [PARENTAL] [CODE EDIT]. 3 Enter the current passcode on the current passcode input display, then press ENTER. The initial passcode is [0000]. 4 Enter your new 4-digit passcode on the new passcode input display, then press ENTER. To change display items Press and hold DSPL, then press it again to change as follows:
Channel Number (Default) Channel Name Artist Name Song Title Content Info Category Name Clock iTunes Tagging With the iTunes Tagging feature, you can tag songs you hear while listening to SiriusXM or HD Radio stations. Song information is saved to the unit until you connect your iPod and then the song information is transferred to your iPod. When your iPod is connected to iTunes, you will then be able to preview and purchase the songs that you heard while listening to SiriusXM or HD Radio stations. For details on compatible iPod models, see About iPod (page 21). For details on iTunes Tagging and the latest iTunes Tagging compatible models, check the iTunes website at -
http://www.apple.com/itunes/
For details on purchasing a song using "Tagged"
information, check the iTunes website at -
http://www.apple.com/support/itunes/
1 Press TAG when the TAG indicator is lit. The TAG indicator lights up when song information is broadcast on a SiriusXM or HD Radio station. The TAG indicator blinks while retrieving and saving the song information. The song information is saved to the unit. 2 Connect an iPod to the USB port to transfer the data. If an iPod is already connected, the data will be transferred immediately.
[TRANSFER] appears in the display and starts blinking during the transfer. 3 Sync the iPod to your computer. The songs will show up in a Tagged playlist in iTunes. Notes If TAG is pressed right after the beginning of a song or just before the end of a song, the unit may retrieve the information of the previous or next song, in addition to the current song. The maximum number of tagged songs that you can save to this unit is 50. Once the tagged songs are transferred to the iPod, they are erased from the unit automatically. To delete all tagged songs before transfer 1 Press MENU, rotate the control dial to select
[GENERAL], then press it. 2 Rotate the control dial to select [TAG DEL], then press it. 3 Rotate the control dial to select [YES], then press it. 11GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Left ML.book Page 12 Friday, March 14, 2014 9:35 AM Playback Playing a Disc 1 Insert the disc (label side up). Playback starts automatically. Playing an iPod/USB Device In these Operating Instructions, iPod is used as a general reference for the iPod functions on an iPod and iPhone, unless otherwise specified by the text or illustrations. For details on the compatibility of your iPod, see About iPod (page 21) or visit the support site on the back cover. MSC (Mass Storage Class)-type USB devices (such as a USB flash drive, digital media player, Android phone) compliant with the USB standard can be used. Depending on the digital media player or Android phone, setting the USB connection mode to MSC is required. Notes For details on the compatibility of your USB device, visit the support site on the back cover. Playback of the following MP3/WMA/WAV files is not supported. lossless compression files copyright-protected files DRM (Digital Rights Management) files Multi-channel audio files 1 Connect an iPod/USB device to the USB port (page 8). Playback starts. If a device is already connected, to start playback, press SRC to select [USB] ([IPD]
appears in the display when the iPod is recognized). For MEX-GS810BH, press SRC to select [USB1] for the USB port on the front, [USB2] for the USB port on the rear. 2 Adjust the volume on this unit. 12GB To stop playback Press and hold OFF for 1 second. To remove the device Stop playback, then remove the device. Caution for iPhone When you connect an iPhone via USB, phone call volume is controlled by the iPhone, not the unit. Do not inadvertently increase the volume on the unit during a call, as sudden loud sound may result when the call ends. Operating an iPod directly (Passenger control) Press and hold MODE during playback until [MODE IPOD] appears to enable operation by the iPod directly. Note that the volume can be adjusted only by the unit. To exit passenger control Press and hold MODE until [MODE AUDIO] appears. Playing a BLUETOOTH Device You can play contents on a connected device that supports BLUETOOTH A2DP (Advanced Audio Distribution Profile). 1 Make BLUETOOTH connection with the audio device (page 7). 2 Press SRC to select [BT AUDIO]. 3 Operate the audio device to start playback. 4 Adjust the volume on this unit. Notes Depending on the audio device, information such as title, track number/time and playback status may not be displayed on this unit. Even if the source is changed on this unit, playback of the audio device does not stop.
[BT AUDIO] does not appear in the display while running the App Remote application via the BLUETOOTH function. To match the volume level of the BLUETOOTH device to other sources Start playback of the BLUETOOTH audio device at a moderate volume, and set your usual listening volume on the unit. MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Right ML.book Page 13 Friday, March 14, 2014 9:35 AM Press MENU and rotate the control dial. Select [SOUND] [BTA VOL] (page 20). Searching and Playing Tracks 4 Press ENTER to return to the Quick-
BrowZer mode. The selected item appears. 5 Rotate the control dial to select the desired item, then press it. Playback starts. Repeat play and shuffle play 1 During playback, press
(repeat) for
(shuffle) for Shuffle Repeat play, or play. 2 Press
(repeat) or
(shuffle) repeatedly to select the desired play mode. Playback in selected play mode may take time to start. Available play modes differ depending on the selected sound source. Searching a track by name (Quick-
BrowZer) 1 During CD, USB or BT audio device*1
(browse)*2 to display playback, press the list of search categories. When the track list appears, press repeatedly to display the desired search category.
(back)
*1 Available only for audio devices supporting AVRCP (Audio Video Remote Control Profile) 1.4 or above.
*2 During USB playback, press
(browse) for more than 2 seconds to directly return to the beginning of the category list. 2 Rotate the control dial to select the desired search category, then press it to confirm. 3 Repeat step 2 to search the desired track. Playback starts. To exit the Quick-BrowZer mode Press
(browse). Searching by skipping items
(Jump mode) 1 Press 2 Press SEEK +. 3 Rotate the control dial to select the item.
(browse). The list is jumped in steps of 10% of the total number of items. 13GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Left ML.book Page 14 Friday, March 14, 2014 9:35 AM Available Operations in the Pandora Thumbs feedback Thumbs Up or Thumbs Down feedback allows you to personalize stations. Thumbs Up During playback, press . Thumbs Down During playback, press . Using the station list The station list allows you to easily select a desired station. 1 During playback, press 2 Press SEEK + to select the sorting order
(browse).
[BY DATE] or [A TO Z]. 3 Rotate the control dial to select the desired station, then press it. Playback starts. Bookmarking The track currently being played can be bookmarked and stored in your Pandora account. 1 During playback, press MODE. Listening to Pandora Pandora is available to stream music through your iPhone, Android and BlackBerry phones. You can control Pandora on a USB-connected iPhone or BLUETOOTH connected Android/BlackBerry phone from this unit. The Pandora service is not available in some countries/regions. Preparing for Pandora 1 To check for compatible devices, visit the support site on the back cover. 2 Download the latest version of the Pandora application from your smartphones app store. A list of compatible devices can be found at www.pandora.com/everywhere/mobile For Android phone only You cannot control Pandora via the BLUETOOTH function while running the App Remote application via BLUETOOTH. Streaming Pandora 1 Connect this unit with the mobile device. iPhone via USB (page 8) Android/BlackBerry phone via BLUETOOTH function (page 7) 2 Press SRC to select [PANDORA USB] or
[BT PANDORA]. 3 Launch Pandora application on the mobile device. 4 Press PAUSE to start playback. If the device number appears Make sure that the same numbers are displayed
(e.g., 123456) in this unit and the mobile device, then press ENTER on this unit and select [Yes] on the mobile device. When activating the BLUETOOTH function You can adjust the volume level. Press MENU and rotate the control dial. Select
[SOUND] [BTA VOL] (page 20). 14GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Right ML.book Page 15 Friday, March 14, 2014 9:35 AM Handsfree Calling To use a cellular phone, connect it with this unit. For details, see Preparing a BLUETOOTH Device
(page 7). Receiving a Call 1 Press CALL when a call is received with a ringtone. The phone call starts. Note The ringtone and talkers voice are output only from the front speakers. To reject the call Press and hold OFF for 1 second. To end the call Press CALL again. Making a Call You can make a call from the phonebook or call history when a cellular phone supporting PBAP
(Phone Book Access Profile) is connected. Calling from the phonebook 1 Press CALL, rotate the control dial to select [PHONEBOOK], then press it. 2 Rotate the control dial to select an initial from the initial list, then press it. 3 Rotate the control dial to select a name from the name list, then press it. 4 Rotate the control dial to select a number from the number list, then press it. The phone call starts. Calling from the call history 1 Press CALL, rotate the control dial to select [RECENT CALL], then press it. A list of the call history appears. 2 Rotate the control dial to select a name or phone number from the call history, then press it. The phone call starts. Calling by phone number input 1 Press CALL, rotate the control dial to select [DIAL NUMBER], then press it. 2 Rotate the control dial to enter the phone number, and lastly select [ ]
(space), then press ENTER*. The phone call starts.
* To move the digital indication, press SEEK +/. Note
[_] appears instead of [#] on the display. Calling by redial 1 Press CALL, rotate the control dial to select [REDIAL], then press it. The phone call starts. Presetting phone numbers You can store up to 6 contacts in the preset dial. 1 Select a phone number that you want to store in the preset dial, from the phonebook, call history or by inputting the phone number directly. The phone number appears in the display of this unit. 2 Press and hold a number button (1 to 6) until [MEM] appears. The contact is stored in the selected preset number. Calling by preset number 1 Press SRC, rotate the control dial to select
[BT PHONE], then press it. 2 Press a number button (1 to 6) to select the contact you want to call. 3 Press ENTER. The phone call starts. 15GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Left ML.book Page 16 Friday, March 14, 2014 9:35 AM Useful Functions App Remote with iPhone/
Android Phone Downloading the App Remote application is required from the App Store for iPhone or from Google Play for Android phone. Using the App Remote application, the following features are available:
Operate the unit to launch and control compatible applications on iPhone/Android phone. Operate iPhone/Android phone with simple finger gestures to control the source of the unit. Launch an application/audio source or search the keyword on the application by saying a word or phrase into the microphone (Android phone only). Read out incoming text messages, SMS, email, Twitter, Facebook, Calendar, etc., automatically, and the text messages, SMS and email can be replied (Android phone only). Adjust the sound settings (EQ10, Balance/Fader, Listening Position) of the unit via iPhone/
Android phone. Notes For your safety, follow your local traffic laws and regulations, and do not operate the application while driving. Available operations differ depending on the applications. For details on available applications, visit the support site on the back cover. App Remote ver. 2.0 via USB is compatible with iOS 5/
iOS 6 installed iPhones. App Remote ver. 2.0 via BLUETOOTH is compatible with Android devices with Android 2.2, 2.3, 3.*, 4.0, 4.1 or 4.2 installed. Voice recognition function does not work depending on your smartphone. In that case, go to [Settings]
select [Voice Recognition]. SMS/E-mail/Notification reading is available for Android devices with TTS engine installed. The Smart Connect application, provided by Sony Mobile Communications, is necessary for Twitter/
Facebook/Calendar, etc., notification read out. Calling by voice tags You can make a call by saying the voice tag stored in a connected cellular phone that has a voice dialing function. 1 Press CALL, rotate the control dial to select [VOICE DIAL], then press it. Alternatively, press ENTER while the App Remote function is off. 2 Say the voice tag stored on the cellular phone. Your voice is recognized, and the call is made. To cancel voice dialing Press ENTER. Available Operations during Call To preset the volume of the ringtone and talkers voice You can preset the volume level of the ringtone and talkers voice. Adjusting the ringtone volume:
Rotate the control dial while receiving a call. Adjusting the talkers voice volume:
Rotate the control dial during a call. To adjust the volume for the other party (Mic gain adjustment) Press MIC. Adjustable volume levels: [MIC-LOW], [MIC-MID],
[MIC-HI]. To reduce echo and noise (Echo Canceler/
Noise Canceler Mode) Press and hold MIC. Settable mode: [EC/NC-1], [EC/NC-2]. To transfer a call In order to activate/deactivate the appropriate device (this unit/cellular phone), press MODE or use your cellular phone. Note Depending on the cellular phone, handsfree connection may be cut off when call transfer is attempted. To check the status of SMS/email*
flashes when a new SMS/email is received, and stays lit when there are unread messages.
* Available only for a cellular phone supporting MAP (Message Access Profile). 16GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Right ML.book Page 17 Friday, March 14, 2014 9:35 AM Activating voice recognition (Android phone only) By registering applications, you can control an application by voice command. For details, refer to the help of the application. To activate voice recognition 1 Press ENTER to activate voice recognition. 2 Say the desired voice command into the microphone when [Say Source or App] appears on the Android phone. Notes Voice recognition may not be available in some cases. Voice recognition may not work properly depending on the performance of the connected Android phone. Operate under conditions where noise such as engine sound is minimized during voice recognition. When a music or video application is selected*
Press 1 or 2 to enter HID mode, and press SEEK +/
to select a playback item, then press ENTER to start playback.
* Available only for an Android phone supporting HID (Human Interface Device Profile). Making sound settings You can adjust the settings for EQ, BAL/FAD/SW Level and Position via your smartphone. For details on settings, refer to the help of the application. Establishing the App Remote connection 1 Connect iPhone to the USB port or Android phone with the BLUETOOTH function. 2 Launch the App Remote application. 3 Press and hold APP on the unit for more than 2 seconds. Connection to iPhone/Android phone starts. For details on the operations on iPhone/
Android phone, see the help of the application. If the device number appears Make sure that the same numbers are displayed
(e.g., 123456) in this unit and the mobile device, then press ENTER on this unit and select [Yes] on the mobile device. To terminate connection Press and hold APP. Selecting the source or application You can operate the unit to select the desired source or application on your smartphone. 1 Rotate the control dial to select the desired source or application, then press it. To select another source or application, press SRC then rotate the control dial to select the desired source or application. Announcement of various information by voice guide (Android phone only) When SMS/E-mail, Twitter/Facebook/Calendar notifications, etc., are received, they are automatically announced through the car speakers. For details on settings, refer to the help of the application. 17GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Left ML.book Page 18 Friday, March 14, 2014 9:35 AM AUTO OFF Shuts off automatically after a desired time when the unit is turned off: [NO], [30S] (30 seconds), [30M] (30 minutes), [60M] (60 minutes). AUX-A (AUX audio) Activates the AUX source display: [ON], [OFF].
(Available only when the unit is turned off.) BTM (page 9) TAG DEL (tag delete) Confirms deleting tags: [YES], [NO] (page 11).
(Available only when the tuner or SiriusXM Connect Vehicle Tuner is selected.) PARENTAL Sets the parental lock to [ON], [OFF], and edits the passcode (page 11). (Available only when the SiriusXM Connect Vehicle Tuner is selected.) SXM RESET (SiriusXM reset) Initializes the SiriusXM Connect Tuner settings
(preset channels/parental lock): [ON], [OFF].
(Available only when the SiriusXM Connect Vehicle Tuner is selected.) SOUND Setup C.AUDIO+ (clear audio+) Reproduces sound by optimizing the digital signal with the Sony recommended sound settings: [ON], [OFF]. (Automatically sets to [OFF]
when [EQ10 PRESET] is changed). EQ10 PRESET Selects an equalizer curve from 10 equalizer curves or off: [R AND B], [ROCK], [POP], [DANCE],
[HIP-HOP], [ELECTRONICA], [JAZZ], [SOUL],
[COUNTRY], [CUSTOM], [OFF]. The equalizer curve setting can be memorized for each source. EQ10 SETTING Sets [CUSTOM] of EQ10. BASE Selects a preset equalizer curve as a basis for further customizing: [BAND1] 32 Hz, [BAND2] 63 Hz, [BAND3] 125 Hz, [BAND4] 250 Hz, [BAND5]
500 Hz, [BAND6] 1 kHz, [BAND7] 2 kHz, [BAND8]
4 kHz, [BAND9] 8 kHz, [BAND10] 16 kHz. The volume level is adjustable in 1 dB steps, from -6 dB to +6 dB. Settings Canceling the DEMO Mode You can cancel the demonstration display which appears while this unit is turned off. 1 Press MENU, rotate the control dial to select [DISPLAY], then press it. 2 Rotate the control dial to select [DEMO], then press it. 3 Rotate the control dial to select [DEMO-
OFF], then press it. The setting is complete. 4 Press
(back) twice. The display returns to normal reception/play mode. Basic Setting Operation You can set items in the menu to the following procedure. The following items can be set depending on the source and setting. 1 Press MENU. 2 Rotate the control dial to select the setup category, then press it. Setup categories are follows:
GENERAL setup (page 18) SOUND setup (page 18) DISPLAY setup (page 20) BT (BLUETOOTH) setup (page 20) APP REM (App Remote) setup (page 20) 3 Rotate the control dial to select the options, then press it. To return to the previous display Press
(back). GENERAL Setup CLOCK-ADJ (clock adjust) (page 6) CAUT ALM (caution alarm) Activates the caution alarm: [ON], [OFF]
(page 6). (Available only when the unit is turned off.) BEEP Activates the beep sound: [ON], [OFF]. 18GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Right ML.book Page 19 Friday, March 14, 2014 9:35 AM POSITION (listening position) RB ENH (rear bass enhancer) SET F/R POS (set front/rear position) Simulates a natural sound field by delaying the sound output from front/rear speaker to suit your position. FRONT L (): Front left FRONT R (): Front right FRONT (): Center front ALL (): In the center of your car CUSTOM: Position set by App Remote OFF: No position set ADJ POSITION* (adjust position) Fine-tunes the listening position setting. Adjustable range: [+3] [CENTER] [-3]. SET SW POS* (set subwoofer position) NEAR (): Near NORMAL (): Normal FAR (): Far BALANCE Adjusts the sound balance: [RIGHT-15]
[CENTER] [LEFT-15]. FADER Adjusts the relative level: [FRONT-15] [CENTER]
[REAR-15]. DSEE (digital sound enhancement engine) Improves digitally compressed sound by restoring high frequencies lost in the compression process. This setting can be memorized for each source other than the tuner. Selects the DSEE mode: [ON], [OFF]. LOUDNESS Reinforces bass and treble for clear sound at low volume levels: [ON], [OFF]. AAV (advanced auto volume) Adjust the playback volume level of all playback sources to the optimum level: [ON], [OFF]. Rear Bass Enhancer enhances the bass sound by applying a low pass filter setting to the rear speakers. This function allows the rear speakers to work as a subwoofer if one is not connected.
(Available only when [SW DIREC] is set to [OFF].) RBE MODE (rear bass enhancer mode) Selects the rear bass enhancer mode: [1], [2], [3],
[OFF]. LPF FREQ (low pass filter frequency) Selects the subwoofer cut-off frequency: [50Hz],
[60Hz], [80Hz], [100Hz], [120Hz]. LPF SLOP (low pass filter slope) Selects the LPF slope: [1], [2], [3]. SW DIREC (subwoofer direct connection) You can use the subwoofer without a power amplifier when it is connected to the rear speaker cord. (Available only when [RBE MODE]
is set to [OFF].) Be sure to connect a 4 - 8 ohm subwoofer to either of the rear speaker cords. Do not connect a speaker to the other rear speaker cord. SW MODE (subwoofer mode) Selects the subwoofer mode: [1], [2], [3], [OFF]. SW PHASE (subwoofer phase) Selects the subwoofer phase: [NORM], [REV]. SW POS* (subwoofer position) Selects the subwoofer position: [NEAR],
[NORMAL], [FAR]. LPF FREQ (low pass filter frequency) Selects the subwoofer cut-off frequency: [50Hz],
[60Hz], [80Hz], [100Hz], [120Hz]. LPF SLOP (low pass filter slope) Selects the LPF slope: [1], [2], [3]. S.WOOFER (subwoofer) SW LEVEL (subwoofer level) Adjusts the subwoofer volume level:
[+10 dB] [0 dB] [-10 dB].
([ATT] is displayed at the lowest setting.) SW PHASE (subwoofer phase) Selects the subwoofer phase: [NORM], [REV]. SW POS* (subwoofer position) Selects the subwoofer position: [NEAR],
[NORMAL], [FAR]. LPF FREQ (low pass filter frequency) Selects the subwoofer cut-off frequency: [50Hz],
[60Hz], [80Hz], [100Hz], [120Hz]. LPF SLOP (low pass filter slope) Selects the LPF slope: [1], [2], [3]. HPF (high pass filter) HPF FREQ (high pass filter frequency) Selects the front/rear speaker cut-off frequency:
[OFF], [50Hz], [60Hz], [80Hz], [100Hz], [120Hz]. HPF SLOP (high pass filter slope) Selects the HPF slope (effective only when [HPF FREQ] is set to other than [OFF]): [1], [2], [3]. 19GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Left ML.book Page 20 Friday, March 14, 2014 9:35 AM AUX VOL (AUX volume level) START-WHT (start white) Adjusts the volume level for each connected auxiliary device: [+18 dB] [0 dB] [-8 dB]. This setting negates the need to adjust the volume level between sources. When SRC is pressed, the display and buttons on the main unit turn white once, then change to the customized color: [ON], [OFF]. AUTO SCR (auto scroll) BTA VOL (BLUETOOTH audio volume level) Scrolls long items automatically: [ON], [OFF]. Adjusts the volume level for each connected BLUETOOTH device: [+6 dB] [0 dB] [-6 dB]. This setting negates the need to adjust the volume level between sources.
* Does not appear when [SET F/R POS] is set to [OFF]. DISPLAY Setup DEMO (demonstration) Activates the demonstration: [ON], [OFF]. DIMMER Changes the display brightness. AT (auto) Dims the display automatically when you turn lights on. (Available only when the illumination control lead is connected.) ON Dims the display. OFF Deactivates the dimmer. COLOR (preset color - dynamic color illuminator) Sets a preset color for the display and buttons on the main unit. Selects from 12 preset colors, 1 customized color and 5 preset patterns. CUSTOM-C (custom color) Registers a customized color for the display and buttons. BASE Selects a preset color as a basis for further customizing: [RGB RED], [RGB GRN],
[RGB BLUE]. Adjustable color range: [0] [32] ([0] cannot be set for all color ranges). DAYNIGHT Sets a different color for DAY/NIGHT mode according to the dimmer setting.
[DAY]: [DIMMER] sets to [OFF] or [AUTO] (turn off the head light).
[NIGHT]: [DIMMER] sets to [ON] or [AUTO] (turn on the head light). SND SYNC (sound synchronization) Selects the color with sound synchronization:
[ON], [OFF]. WHT MENU (white menu) You can display the menu more clearly (white) without concern for color setting: [ON], [OFF]. 20GB BT (BLUETOOTH) Setup This setup menu can be also opened by pressing CALL. PAIRING (page 7) PHONEBOOK (page 15) REDIAL (page 15) RECENT CALL (page 15) VOICE DIAL (page 16) DIAL NUMBER (page 15) RINGTONE Selects whether this unit or the connected cellular phone outputs the ringtone: [1] (this unit), [2] (cellular phone). AUTO ANS (auto answer) Sets this unit to answer an incoming call automatically: [OFF], [1] (about 3 seconds), [2]
(about 10 seconds). AUTO PAIRING*
Start BLUETOOTH pairing automatically when iOS device version 5.0 or later is connected via USB: [ON], [OFF]. BT SIGNL (BLUETOOTH signal) (page 7) Activates the BLUETOOTH function: [ON], [OFF]. BT INIT* (BLUETOOTH initialize) Initializes all the BLUETOOTH related settings
(pairing information, preset number, device information, etc.). When disposing the unit, initialize all the settings. (Available only when the unit is turned off.)
* Does not appear by pressing CALL. To set up the item, follow the procedure of Basic Setting Operation
(page 18). APP REM (App Remote) Setup Establish and terminate App Remote function
(connection). MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Right ML.book Page 21 Friday, March 14, 2014 9:35 AM Additional Information Precautions Cool off the unit beforehand if your car has been parked in direct sunlight. Do not leave the front panel or audio devices brought in inside the car, or it may cause malfunction due to high temperature in direct sunlight. Power antenna (aerial) extends automatically. Moisture condensation Should moisture condensation occur inside the unit, remove the disc and wait for about an hour for it to dry out; otherwise the unit will not operate properly. To maintain high sound quality Do not splash liquid onto the unit or discs. Notes on discs Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight. Before playing, wipe the discs with a cleaning cloth from the center out. Do not use solvents such as benzine, thinner, commercially available cleaners. This unit is designed to play back discs that conform to the Compact Disc (CD) standard. DualDiscs and some of the music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard, therefore, these discs may not be playable by this unit. Discs that this unit CANNOT play Discs with labels, stickers, or sticky tape or paper attached. Doing so may cause a malfunction, or may ruin the disc. Discs with non-standard shapes (e.g., heart, square, star). Attempting to do so may damage the unit. 8 cm (3 1/4 in) discs. Notes on CD-R/CD-RW discs The maximum number of: (CD-R/CD-RW only) folders (albums): 150 (including root folder) files (tracks) and folders: 300 (may less than 300 if folder/file names contain many characters) displayable characters for a folder/file name: 32
(Joliet)/64 (Romeo) If the multi-session disc begins with a CD-DA session, it is recognized as a CD-DA disc, and other sessions are not played back. Discs that this unit CANNOT play CD-R/CD-RW of poor recording quality. CD-R/CD-RW recorded with an incompatible recording device. CD-R/CD-RW which is finalized incorrectly. CD-R/CD-RW other than those recorded in music CD format or MP3 format conforming to ISO9660 Level 1/Level 2, Joliet/Romeo or multi-
session. Playback order of MP3/WMA files MP3/WMA Folder (album) MP3/WMA file (track) About iPod You can connect to the following iPod models. Update your iPod devices to the latest software before use. Compatible iPhone/iPod models Compatible Model iPhone 5 iPhone 4s iPhone 4 iPhone 3GS iPhone 3G iPod touch (5th generation) iPod touch (4th generation) iPod touch (3rd generation) iPod touch (2nd generation) iPod classic iPod nano (7th generation) iPod nano (6th generation) iPod nano (5th generation) iPod nano (4th generation) iPod nano (3rd generation) USB 21GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Left ML.book Page 22 Friday, March 14, 2014 9:35 AM Made for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. About BLUETOOTH function What is BLUETOOTH technology?
BLUETOOTH wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a cellular phone and a headset. BLUETOOTH wireless technology operates within a range of about 10 m (33 ft). Connecting two devices is common, but some devices can be connected to multiple devices at the same time. You do not need to use a cable for connection since BLUETOOTH technology is a wireless technology, neither is it necessary for the devices to face one another, such is the case with infrared technology. For example, you can use such a device in a bag or pocket. BLUETOOTH technology is an international standard supported by millions of companies all over the world, and employed by various companies worldwide. On BLUETOOTH communication BLUETOOTH wireless technology operates within a range of about 10 m (33 ft). Maximum communication range may vary depending on obstacles (person, metal, wall, etc.) or electromagnetic environment. The following conditions may affect the sensitivity of BLUETOOTH communication. There is an obstacle such as a person, metal, or wall between this unit and BLUETOOTH device. A device using 2.4 GHz frequency, such as a wireless LAN device, cordless telephone, or microwave oven, is in use near this unit. Because BLUETOOTH devices and wireless LAN
(IEEE802.11b/g) use the same frequency, microwave interference may occur and result in communication speed deterioration, noise, or invalid connection if this unit is used near a wireless LAN device. In such as case, perform the following. Use this unit at least 10 m (33 ft) away from the wireless LAN device. If this unit is used within 10 m (33 ft) of a wireless LAN device, turn off the wireless LAN device. Install this unit and BLUETOOTH device as near to each other as possible. 22GB Microwaves emitting from a BLUETOOTH device may affect the operation of electronic medical devices. Turn off this unit and other BLUETOOTH devices in the following locations, as it may cause an accident. where inflammable gas is present, in a hospital, train, airplane, or petrol station near automatic doors or a fire alarm This unit supports security capabilities that comply with the BLUETOOTH standard to provide a secure connection when the BLUETOOTH wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using BLUETOOTH wireless technology. We do not take any responsibility for the leakage of information during BLUETOOTH communication. Connection with all BLUETOOTH devices cannot be guaranteed. A device featuring BLUETOOTH function is required to conform to the BLUETOOTH standard specified by BLUETOOTH SIG, and be authenticated. Even if the connected device conforms to the above mentioned BLUETOOTH standard, some devices may not be connected or work correctly, depending on the features or specifications of the device. While talking on the phone hands free, noise may occur, depending on the device or communication environment. Depending on the device to be connected, it may require some time to start communication. Others Using the BLUETOOTH device may not function on cellular phones, depending on radio wave conditions and location where the equipment is being used. If you experience discomfort after using the BLUETOOTH device, stop using the BLUETOOTH device immediately. Should any problem persist, consult your nearest Sony dealer. If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer. MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Right ML.book Page 23 Friday, March 14, 2014 9:35 AM Maintenance Replacing the lithium battery of the remote commander When the battery becomes weak, the range of the remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery. Use of any other battery may present a risk of fire or explosion.
+ side up Notes on the lithium battery Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. Wipe the battery with a dry cloth to assure a good contact. Be sure to observe the correct polarity when installing the battery. Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur. Cleaning the connectors The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 6) and clean the connectors with a cotton swab. Do not apply too much force. Otherwise, the connectors may be damaged. Notes For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch. Never touch the connectors directly with your fingers or with any metal device. Specifications AUDIO POWER SPECIFICATIONS CEA2006 Standard Power Output: 17 Watts RMS 4 at 4 Ohms < 1% THD+N SN Ratio: 80 dBA
(reference: 1 Watt into 4 Ohms) Tuner section FM Tuning range: 87.5 107.9 MHz Antenna (aerial) terminal:
External antenna (aerial) connector Intermediate frequency: 25 kHz Usable sensitivity: 8 dBf Selectivity: 75 dB at 400 kHz Signal-to-noise ratio (stereo):
79 dB (Conventional broadcast) 80 dB (HD Radio broadcast) Separation at 1 kHz:
50 dB (Conventional broadcast) 80 dB (HD Radio broadcast) Frequency response:
20 - 15,000 Hz (Conventional broadcast) 20 - 20,000 Hz (HD Radio broadcast) AM Tuning range: 530 1,710 kHz Antenna (aerial) terminal:
External antenna (aerial) connector Intermediate frequency:
9,115 kHz or 9,125 kHz/5 kHz Sensitivity: 26 V CD Player section Signal-to-noise ratio: 120 dB Frequency response: 10 20,000 Hz Wow and flutter: Below measurable limit Corresponding codec: MP3 (.mp3) and WMA (.wma) USB Player section Interface: USB (High-speed) Maximum current:
MEX-N6000BH: 1 A MEX-GS810BH: 1 A (front), 2.1 A (rear) The maximum number of recognizable tracks:
10,000 Corresponding codec:
MP3 (.mp3), WMA (.wma) and WAV (.wav) Wireless Communication Communication System:
BLUETOOTH Standard version 3.0 Output:
BLUETOOTH Standard Power Class 2
(Max. +4 dBm) Maximum communication range:
Line of sight approx. 10 m (33 ft)*1 23GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Left ML.book Page 24 Friday, March 14, 2014 9:35 AM Frequency band:
2.4 GHz band (2.4000 2.4835 GHz) Modulation method: FHSS Compatible BLUETOOTH Profiles*2:
A2DP (Advanced Audio Distribution Profile) 1.3 AVRCP (Audio Video Remote Control Profile) 1.5 HFP (Handsfree Profile) 1.6 PBAP (Phone Book Access Profile) SPP (Serial Port Profile) MAP (Message Access Profile) HID (Human Interface Device Profile)
*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna (aerial)s performance, operating system, software application, etc.
*2 BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices. Power amplifier section Output: Speaker outputs Speaker impedance: 4 8 ohms Maximum power output: 55 W 4 (at 4 ohms) General Outputs:
Audio outputs terminal (front, rear, sub) Power antenna (aerial)/Power amplifier control terminal (REM OUT) Inputs:
SiriusXM input terminal Remote controller input terminal Antenna (aerial) input terminal MIC input terminal AUX input jack (stereo mini jack) USB port:
MEX-N6000BH: front MEX-GS810BH: front, rear Power requirements: 12 V DC car battery (negative ground (earth)) Dimensions:
Approx. 178 mm 50 mm 177 mm
(7 1/8 in 2 in 7 in) (w/h/d) Mounting dimensions:
Approx. 182 mm 53 mm 160 mm
(7 1/4 in 2 1/8 in 6 5/16 in) (w/h/d) Mass: Approx. 1.2 kg (2 lb 11 oz) Package contents:
Main unit (1) Remote commander (1): RM-X231 Microphone (1) Parts for installation and connections (1 set) Optional accessories/equipment:
SiriusXM Connect Vehicle Tuner: SXV100 Your dealer may not handle some of the above listed accessories. Please ask the dealer for detailed information. Design and specifications are subject to change without notice. 24GB Copyrights SiriusXM Connect Vehicle Tuner and Subscription sold separately. www.siriusxm.com Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. All rights reserved. HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio and the HD, HD Radio, and Arc logos are proprietary trademarks of iBiquity Digital Corp. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission. Google, Google Play and Android are trademarks of Google Inc. BlackBerry is the property of Research In Motion Limited and is registered and/or used in the U.S. and countries around the world. Used under license from Research In Motion Limited. MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Right ML.book Page 25 Friday, March 14, 2014 9:35 AM Troubleshooting The following checklist will help you remedy problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. For details on using the fuse and removing the unit from the dashboard, refer to the installation/
connections manual supplied with this unit. If the problem is not solved, visit the support site on the back cover. General No power is being supplied to the unit. If the unit is turned off and the display disappears, the unit cannot be operated with the remote commander. Turn on the unit. No sound. The position of the fader control [FADER] is not set for a 2-speaker system. No beep sound. An optional power amplifier is connected and you are not using the built-in amplifier. The contents of the memory have been erased. The power supply lead or battery has been disconnected or not connected properly. Stored stations and correct time are erased. The fuse has blown. Makes a noise when the position of the ignition is switched. The leads are not matched correctly with the cars accessory power connector. During playback or reception, the demonstration mode starts. If no operation is performed for 5 minutes with
[DEMO-ON] set, the demonstration mode starts. Set [DEMO-OFF] (page 20). The display disappears from/does not appear in the display window. The dimmer is set to [DIM-ON] (page 20). The display disappears if you press and hold OFF. Press OFF on the unit until the display appears. The connectors are dirty (page 23). The operation buttons do not function. The disc will not eject. Press TAG/CAT and
(back)/MODE for more than 2 seconds to reset the unit. The contents stored in memory are erased. For your safety, do not reset the unit while you are driving. Radio reception Stations cannot be received. The sound is hampered by noises. The connection is not correct. If your car has built-in radio antenna (aerial) in the rear/side glass, connect an REM OUT lead
(blue/white striped) or accessory power supply lead (red) to the power supply lead of a cars antenna (aerial) booster. Check the connection of the car antenna
(aerial). If the auto antenna (aerial) will not extend, check the connection of the power antenna
(aerial) control lead. Preset tuning is not possible. The broadcast signal is too weak. CD playback The disc does not play back. Defective or dirty disc. The CD-R/CD-RW is not for audio use (page 21). MP3/WMA files cannot be played back. The disc is incompatible with the MP3/WMA format and version. For details on playable discs and formats, visit the support site. MP3/WMA files take longer to play back than others. The following discs take a longer time to start playback. A disc recorded with a complicated tree structure. A disc recorded in Multi Session. A disc to which data can be added. The sound skips. Defective or dirty disc. USB playback You cannot play back items via a USB hub. This unit cannot recognize USB devices via a USB hub. A USB device takes longer to play back. The USB device contains files with a complicated tree structure. The sound is intermittent. The sound may be intermittent at a high-bit-rate of more than 320 kbps. Pandora connection is not possible. Shut down the Pandora application on the mobile device, and then launch it again. 25GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Left ML.book Page 26 Friday, March 14, 2014 9:35 AM Application name is mismatched with the actual application in App Remote. Launch the application again from the App Remote application. A call partner says that the volume is too low or high. Adjust the volume accordingly using mic gain adjustment (page 16). NFC function One touch connection (NFC) is not possible. If the smartphone does not respond to the touching. Check that the NFC function of the smartphone is turned on. Move the N-Mark part of the smartphone closer to the N-Mark part on this unit. If the smartphone is in a case, remove it. NFC receiving sensitivity depends on the device. If One touch connection with the smartphone fails several times, make BLUETOOTH connection manually. BLUETOOTH function The connecting device cannot detect this unit. Before the pairing is made, set this unit to pairing standby mode. While connected to a BLUETOOTH device, this unit cannot be detected from another device. Disconnect the current connection and search for this unit from another device. When the device pairing is made, set the BLUETOOTH signal output to on (page 7). Connection is not possible. The connection is controlled from one side (this unit or BLUETOOTH device), but not both. Connect to this unit from a BLUETOOTH device or vice versa. The name of the detected device does not appear. Depending on the status of the other device, it may not be possible to obtain the name. No ringtone. Adjust the volume by rotating the control dial while receiving a call. Depending on the connecting device, the ringtone may not be sent properly. Set [RINGTONE] to [1] (page 20). The front speakers are not connected to the unit. Connect the front speakers to the unit. The ringtone is output only from the front speakers. The talkers voice cannot be heard. The front speakers are not connected to the unit. Connect the front speakers to the unit. The talkers voice is output only from the front speakers. 26GB Echo or noise occurs in phone call conversations. Lower the volume. Set EC/NC Mode to [EC/NC-1] or [EC/NC-2]
(page 16). If the ambient noise other than the phone call sound is loud, try reducing this noise. E.g.: If a window is open and road noise, etc., is loud, shut the window. If an air conditioner is loud, lower the air conditioner. The phone is not connected. When BLUETOOTH audio is played, the phone is not connected even if you press CALL. Connect from the phone. The phone sound quality is poor. Phone sound quality depends on reception conditions of cellular phone. Move your car to a place where you can enhance the cellular phones signal if the reception is poor. The volume of the connected audio device is low
(high). Volume level will differ depending on the audio device. Adjust the volume of the connected audio device or this unit. The sound skips during playback of a BLUETOOTH audio device. Reduce the distance between the unit and the BLUETOOTH audio device. If the BLUETOOTH audio device is stored in a case which interrupts the signal, remove the audio device from the case during use. Several BLUETOOTH devices or other devices which emit radio waves are in use nearby. Turn off the other devices. Increase the distance from the other devices. The playback sound stops momentarily when the connection between this unit and the cellular phone is being made. This is not a malfunction. The connected BLUETOOTH audio device cannot be controlled. Check that the connected BLUETOOTH audio device supports AVRCP. Some functions do not work. Check if the connecting device supports the functions in question. A call is answered unintentionally. The connecting phone is set to answer a call automatically. MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Right ML.book Page 27 Friday, March 14, 2014 9:35 AM Pairing failed due to time out. Depending on the connecting device, the time limit for pairing may be short. Try completing the pairing within the time. BLUETOOTH function cannot operate. Turn off the unit by pressing OFF for more than 2 seconds, then turn the unit on again. No sound is output from the car speakers during handsfree call. If the sound is output from the cellular phone, set the cellular phone to output the sound from the car speakers. Pandora connection is not possible. Shut down the Pandora application on the mobile device, and then launch again. Application name is mismatched with the actual application in App Remote. Launch the application again from the App Remote application. While running the App Remote application via BLUETOOTH, the display automatically switches to [BT AUDIO]. The App Remote application or BLUETOOTH function has failed. Run the application again. Error displays/Messages ERROR The disc is dirty or inserted upside down. Clean or insert the disc correctly. A blank disc has been inserted. The disc cannot play due to a problem. Insert another disc. USB device was not automatically recognized. Connect it again. Press to remove the disc. HUB NO SUPRT (hubs not supported) USB hub is not supported on this unit. IPD STOP (iPod stop) When repeat play is not set, playback of the last track in album finished. The music application in the iPod/iPhone is terminated. Press PAUSE to start playback again. NO DEV (no device)
[USB] is selected as source without a USB device connected. A USB device or a USB cable has been disconnected during playback. Be sure to connect a USB device and USB cable. NO MUSIC The disc or USB device does not contain a music file. Insert a music CD. Connect a USB device with a music file in it. OVERLOAD USB device is overloaded. Disconnect the USB device, then change the source by pressing SRC. The USB device has a fault, or an unsupported device is connected. PUSH EJT (push eject) The disc cannot be ejected. Press (eject). READ The unit is reading all track and album information on the disc. Wait until reading is complete and playback starts automatically. Depending on the disc structure, it may take more than a minute. USB NO SUPRT (USB not supported) The connected USB device is not supported. For details on the compatibility of your USB device, visit the support site.
During reverse or fast-forward, you have reached
] or [
the beginning or the end of the disc and you cannot go any further.
The character cannot be displayed. For BLUETOOTH function:
BT BUSY (BLUETOOTH busy) The phonebook and the call history of the cellular phone are not accessible from this unit. Wait for a while, and then try again. ERROR BT Initialize failed. Phonebook access failed. Phonebook content was changed while accessing the cellular phone. Access the phonebook in the cellular phone again. MEM FAILURE (memory failure) This unit failed to store the contact in the preset dial. Make sure that the number you intend to store is correct (page 15). 27GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Left ML.book Page 28 Friday, March 14, 2014 9:35 AM MEMORY BUSY This unit is storing data. Wait until storing has finished. NO DEV (no device) BLUETOOTH audio source is selected without a BLUETOOTH audio device connected. A BLUETOOTH audio device has been disconnected during a call. Be sure to connect a BLUETOOTH audio device. BLUETOOTH phone source is selected without a cellular phone connected. A cellular phone has been disconnected during a call. Be sure to connect a cellular phone. P EMPTY (preset number empty) The preset dial is empty. UNKNOWN Name or phone number cannot be displayed when browsing phonebook or call history. WITHHELD Phone number is hidden by caller. For App Remote operation:
APP -------- (application) Connection with the application is not made. Establish iPhone connection again. APP DISCNCT (application disconnected) App Remote connection is not made. Establish the App Remote connection
(page 17). APP MENU (application menu) Button operation cannot be performed while a menu on iPhone/Android phone is open. Exit the menu on iPhone/Android phone. APP NO DEV (application no device) The device with the application installed is not connected. Connect the device, then establish iPhone connection. APP SOUND (application sound) Button operation cannot be performed while a sound menu on iPhone/Android phone is open. Exit the sound menu on iPhone/Android phone. OPEN APP (open application) The App Remote application is not running. Launch the iPhones application. 28GB For HD Radio operation:
IPOD FULL There is no memory space on the iPod while transferring song information. LINKING The reception of the supplemental program is interrupted. NO INFO (no information) When this unit receive analog broadcasting, song title/artist name/album name does not appear. Some radio stations do not provide this information. For iTunes Tagging operation:
PREV STORED (previous stored) TAG was pressed with the same song information already saved. STORE FAIL (store failure) Trying to retrieve song information again when already retrieving song information. TAG STORING TAG was pressed while retrieving song information. TAG FAILURE Failed to transfer song information.
[TAG DEL] was selected while saving other song information. Try again. TAG MEM FULL (TAG memory full) TAG was pressed with 50 tagged songs already saved. TAG NO SUPRT (TAG not supported) An iPod not compliant with iTunes Tagging was connected to the unit with song information saved. For Pandora operation:
CANNOT SKIP Skipping tracks on Pandora is not allowed. Wait until the commercial ends. Pandora limits the number of skips allowed on their service. Wait until the next track begins, or select another station on the list. ERROR Thumbs feedback failed. Try Thumbs Up/Down again. Bookmarking failed. Try bookmarking again. MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Right ML.book Page 29 Friday, March 14, 2014 9:35 AM NO STATION There is no station on your Pandora account. Create the station on the mobile device. NOT ALLOWED Thumbs feedback is not allowed. Wait until the commercial ends. Some functions, such as Shared Station, do not permit feedback. Wait until the next track begins, or select another station on the list. Bookmark is not allowed. Wait until the commercial ends. Select another track or station, then try it again. OPEN APP (open application) When connecting via the USB port. Pandora does not launch. Launch the Pandora application on the iPhone. OPEN APP (open application), PRESS PAUSE When connecting via the BLUETOOTH function. Pandora does not launch. Launch the Pandora application on the mobile device, then press PAUSE. PAN MAINT (Pandora maintenance) The Pandora server is under maintenance. Wait for a while, and then try again. PAN NO SUPRT (Pandora not supported) The connected device is not supported. For details of compatible devices, visit the support site. PAN RESTRICT (Pandora licensing restriction) Pandora is not available outside your country. PLEASE LOGIN, PANDORA APP (Pandora application) Not logged into your Pandora account. Disconnect the device, and log into your Pandora account, then connect the device again. UPDATE PAN (update Pandora application) An old version of Pandora is connected. Update the Pandora application to the latest version. NO NETWORK Network connection is unstable or lost. Make the network connection again on the device. Wait until the network connection is established. For SiriusXM operation:
CH LOCKED (channel locked) The channel that you have requested is locked by the radio parental control feature. See To set a parental control (page 11) for more information on the parental control feature and how to access locked channels. CH UNAVAIL (channel unavailable) The channel that you have requested is not a valid SiriusXM channel or the channel that you were listening to is no longer available. You may also see this message briefly when first connecting a new SiriusXM Connect Vehicle Tuner. Visit www.siriusxm.com for more information about the SiriusXM channel lineup. CHAN UNSUB (channel unsubscribed) The channel that you have requested is not included in your SiriusXM subscription package or the channel that you were listening to is no longer included in your SiriusXM subscription package. Visit www.siriusxm.com or call 866-635-2349 if you have questions about your subscription package or would like to subscribe to this channel. CHK ANT (check antenna) The radio has detected a fault with the SiriusXM antenna. The antenna cable may be either disconnected or damaged. Verify that the antenna cable is connected to the SiriusXM Connect Vehicle Tuner. Inspect the antenna cable for damage and kinks. Replace the antenna if the cable is damaged. SiriusXM products are available at your local car audio retailer or online at -
www.shop.siriusxm.com CHECK TUNER The radio is having difficulty communicating with the SiriusXM Connect Vehicle Tuner. The tuner may be disconnected or damaged. Verify that the SiriusXM Connect Vehicle Tuner cable is securely connected to the radio. MEM FAILURE (memory failure) This unit failed to store the channel in the preset dial. Make sure that the channel you intend to store is correct. NO SIGNAL SiriusXM Connect Vehicle Tuner is having difficulty receiving the SiriusXM satellite signal. Verify that your vehicle is outdoors with a clear view of the sky. 29GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Left ML.book Page 30 Friday, March 14, 2014 9:35 AM Verify that the SiriusXM magnetic mount antenna is mounted on a metal surface on the outside of the vehicle. Move the SiriusXM antenna away from any obstructions. Inspect the antenna cable for damage and kinks. Consult the SiriusXM Connect Vehicle Tuner installation manual for more information on antenna installation. Replace the antenna if the cable is damaged. SiriusXM products are available at your local car audio retailer or online at -
www.shop.siriusxm.com SUBSCRIPTION UPDATE - ENTER TO CONTINUE The radio has detected a change in your SiriusXM subscription status. Press ENTER to clear the message. Visit www.siriusxm.com or call 866-635-2349, if you have questions about your subscription. If these solutions do not help improve the situation, consult your nearest Sony dealer. If you take the unit to be repaired because of CD playback trouble, bring the disc that was used at the time the problem began. 30GB MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\040CD.fm masterpage: Blank.R ML.book Page 31 Friday, March 14, 2014 9:35 AM MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\020INT.fm masterpage: Izquier da ML.book Page 2 Friday, March 14, 2014 9:35 AM Asegrese de instalar esta unidad en la consola del barco por razones de seguridad. Para realizar la instalacin y las conexiones, consulte el manual de instalacin y conexiones suministrado. La placa de caractersticas que indica el voltaje de funcionamiento, etc., est situada en la parte inferior del chasis. PRECAUCIN El uso de instrumentos pticos con este producto aumenta el riesgo de sufrir daos oculares. Nota sobre la pila de litio No exponga la pila a fuentes de calor excesivo como luz solar directa, fuego o similar. Advertencia: si el encendido del automvil no dispone de una posicin ACC Asegrese de ajustar la funcin AUTO OFF
(pgina 20). La unidad se apagar completa y automticamente en el tiempo establecido despus de apagarla, lo cual evita que se agote la pila. Si no ajusta la funcin AUTO OFF, mantenga presionado OFF hasta que se apague la pantalla cada vez que apague el motor. 2ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\020INT.fm masterpage: Derech a ML.book Page 3 Friday, March 14, 2014 9:35 AM Llamadas de emergencia El dispositivo de manos libres BLUETOOTH para automviles y el dispositivo electrnico conectados al manos libres funcionan utilizando redes de seales de radio, celulares y terrestres as como tambin la funcin programada por el usuario, que no puede garantizar la conexin en todas las condiciones. Por lo tanto, no dependa nicamente de un dispositivo electrnico para las comunicaciones esenciales (como las emergencias mdicas). Recuerde que, para realizar o recibir llamadas, el dispositivo de manos libres y el dispositivo electrnico conectado al manos libres deben operar en una zona de servicio que tenga una intensidad de seal para celulares adecuada. Es posible que no se puedan realizar llamadas de emergencia en todas las redes de telfonos celulares o cuando se estn utilizando ciertos servicios de la red y caractersticas del telfono. Verifquelo con su proveedor de servicio local. Notas sobre la funcin BLUETOOTH Precaucin SONY NO SER RESPONSABLE DE NINGN DAO INCIDENTAL, INDIRECTO O DERIVADO NI DE OTROS DAOS QUE INCLUYEN, ENTRE OTROS, PRDIDA DE GANANCIAS, PRDIDA DE INGRESOS, PRDIDA DE DATOS, PRDIDA DE LA UTILIDAD DEL PRODUCTO O DE CUALQUIER EQUIPO RELACIONADO, TIEMPO DE INACTIVIDAD Y TIEMPO DEL COMPRADOR RELACIONADO CON LA UTILIZACIN DE ESTE PRODUCTO, SU HARDWARE Y SU SOFTWARE, O QUE RESULTE DE DICHA UTILIZACIN. AVISO IMPORTANTE Utilizacin segura y eficaz Los cambios o las modificaciones que se realicen en esta unidad sin la aprobacin de Sony pueden anular la autorizacin del usuario para utilizar el equipo. Revise las excepciones, debido a requisitos nacionales o limitaciones, en cuanto a la utilizacin de los equipos BLUETOOTH antes de utilizar el producto. Manejo Consulte las leyes y las normas acerca de la utilizacin de telfonos celulares y equipos de manos libres en las reas en las que maneja. Preste siempre atencin a la carretera y estacione el automvil antes de realizar o contestar una llamada si las condiciones lo requieren. Conexin a otros dispositivos Al conectar el equipo a cualquier otro dispositivo, lea el manual de instrucciones correspondiente para obtener las instrucciones de seguridad. Exposicin a radiofrecuencia Las seales de radiofrecuencia pueden afectar los sistemas electrnicos que no hayan sido instalados o protegidos correctamente en automviles, como los sistemas electrnicos de inyeccin de combustible, sistemas electrnicos de frenado antideslizante (antibloqueo), sistemas electrnicos de control de velocidad o sistemas de airbag. Para la instalacin o el mantenimiento de este dispositivo, consulte al fabricante de su automvil o su representante. La instalacin o el mantenimiento incorrectos podran ser peligrosos e invalidar cualquier garanta aplicada a este dispositivo. Consulte con el fabricante de su automvil para asegurarse de que el uso del telfono celular en el automvil no afectar el sistema electrnico. Controle regularmente que todos los equipos del dispositivo inalmbrico de su automvil estn instalados y funcionen correctamente. 3ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\030TOC.fm masterpage: Left ML.book Page 4 Friday, March 14, 2014 9:35 AM COLOR (color predefinido, iluminador de color dinmico) . 22 CUSTOM-C (Color personalizado) . 22 SND SYNC (Sincronizacin de sonidos) . 22 WHT MENU (Men Blanco) . 22 START-WHT (Arranque Blanco) . 22 Configuracin BT (BLUETOOTH). 22 BT INIT* (Inicializacin de la tecnologa BLUETOOTH) . 22 Configuracin APP REM (App Remote). 22 Informacin complementaria Precauciones. 23 Mantenimiento . 25 Especificaciones . 26 Solucin de problemas . 27 Tabla de contenidos Gua para las partes y los controles. 5 Procedimientos iniciales Extraccin del panel frontal . 7 Ajuste del reloj. 7 Preparacin del dispositivo BLUETOOTH . 7 Conexin de un dispositivo iPod/USB. 9 Conexin de otro dispositivo de audio porttil . 10 Escuchar la radio/SiriusXM Escuchar la radio . 10 Almacenamiento y recepcin de emisoras. 10 Escuchar la radio satelital SiriusXM . 11 Etiquetado de iTunes . 12 Reproduccin Reproduccin de un disco . 13 Reproduccin de un dispositivo iPod/USB . 13 Reproduccin de un dispositivo BLUETOOTH. 13 Bsqueda y reproduccin de pistas . 14 Escuchar Pandora Preparacin para Pandora . 15 Transmitir Pandora . 15 Operaciones disponibles en Pandora . 15 Realizacin de llamadas con manos libres Rechazo de llamadas . 16 Realizacin de llamadas. 16 Tareas disponibles durante la llamada . 17 Funciones tiles App Remote con iPhone/Android Phone . 18 Ajustes Cancelacin del modo DEMO . 19 Operacin bsica de ajustes . 19 Configuracin GENERAL . 20 Configuracin SOUND. 20 EQ10 PRESET . 20 EQ10 SETTING . 20 POSITION (posicin de escucha) . 20 RB ENH (Potenciador posterior de sonidos graves) . 21 SW DIREC (Conexin directa al altavoz potenciador de graves) . 21 Configuracin DISPLAY . 22 4ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Derech a ML.book Page 5 Friday, March 14, 2014 9:35 AM Gua para las partes y los controles Unidad principal
(repetir) tiene un punto sensible al tacto. El botn con el nmero 3/
(navegar) (pgina 14, 15) Para entrar al modo de navegacin durante la reproduccin. Botn de liberacin del panel frontal SEEK +/
Para sintonizar emisoras de radio en forma automtica. Mantngalo presionado para sintonizarlas en forma manual.
/ (anterior/siguiente)
/ (rebobinar/avanzar) Selector de control Grelo para ajustar el volumen. ENTER Ingresar el elemento seleccionado. Presione SRC, gire y luego presione para cambiar la fuente. VOICE (pgina 17) Activar el marcado por voz. Cuando la funcin App Remote est encendida, el reconocimiento de voz est activado
(solamente para telfonos Android).
-APP Presione durante 2 segundos para establecer la funcin App Remote (conexin). Marca N Toque el selector del control con un telfono Android para establecer conexin BLUETOOTH. Receptor del control remoto Ranura del disco Visualizador
(expulsar disco) SRC (fuente) Para encender la unidad. Para cambiar la fuente.
-OFF Mantngalo presionado durante 1 segundo para apagar la unidad. Mantngalo presionado durante ms de 2 segundos para apagar la unidad y la pantalla. Si la unidad est apagada y la pantalla desaparece, no se puede operar con el control remoto.
(volver) Para volver a la pantalla anterior. MODE (pgina 11, 13, 15, 17) CALL Acceda al men de llamada. Recibe/finaliza una llamada. Presione y sostenga ms de dos segundos para cambiar la seal de BLUETOOTH. MENU Para abrir el men de configuracin.
-DSPL (pantalla) Presione y aguarde, luego presione para cambiar los elementos de la pantalla. Botones numricos (de 1 a 6) Para recibir las emisoras almacenadas. Mantngalo presionado para almacenarlas en forma manual. Llame a un nmero almacenado. Mantngalo apretado para guardar un nmero telefnico. 5ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Izquier da ML.book Page 6 Friday, March 14, 2014 9:35 AM
()/ () VOL (volumen) +/
SOUND Abra el men SOUND directamente.
-MENU Mantngalo presionado para abrir el men de configuracin.
(+)/ () DSPL (pantalla)/-SCRL(desplazamiento) Para moverse entre los elementos de pantalla. Mantngalo apretado para desplazarse a un elemento de pantalla. ALBUM /
Para saltearse un lbum en el dispositivo de audio. Mantngalo apretado para saltear lbumes en forma continua. Presione para aprobar o para rechazar en Pandora (pgina 15).
(repetir)
(reproduccin aleatoria) MIC (pgina 17) PAUSE TAG Recupere la emisin de informacin de la cancin en una estacin SiriusXM o HD Radio.
-CAT (categora) Mantenga presionado para ingresar al modo de navegacin de categora. Toma de entrada AUX Puerto USB Control remoto RM-X231
* Este botn no se puede utilizar para MEX-N6000BH/
MEX-GS810BH. El botn VOL (volumen) + tiene un punto sensible al tacto. Retire la pelcula de aislamiento antes del uso. 6ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Derech a ML.book Page 7 Friday, March 14, 2014 9:35 AM Procedimientos iniciales Extraccin del panel frontal Es posible extraer el panel frontal de la unidad para evitar que la roben. 1 Mantenga presionado OFF . La unidad se apagar. 2 Presione el botn de liberacin del panel frontal y, a continuacin, extraiga el panel tirando de l hacia usted. Alarma de precaucin Si gira el interruptor de la llave de encendido hasta la posicin OFF sin haber extrado el panel frontal, la alarma de precaucin sonar durante unos segundos. La alarma sonar solamente si se utiliza el amplificador incorporado. Nmeros de serie Asegrese de que los nmeros de serie al final de la unidad coincidan correctamente con los de la parte posterior del panel frontal. De lo contrario, no se podr emparejar, conectarse o desconectarse a BLUETOOTH por NFC. Colocacin del panel frontal Ajuste del reloj 1 Presione MENU, gire el selector de control para seleccionar [GENERAL] y, a continuacin, presinelo. 2 Gire el selector de control para seleccionar [CLOCK-ADJ] y, a continuacin, presinelo. La indicacin de la hora parpadea. 3 Gire el selector de control para ajustar la hora y los minutos. Para mover la indicacin digital, presione SEEK
+/. 4 Una vez ajustados los minutos, presione MENU. El ajuste se completa y el reloj se pone en funcionamiento. Presione DSPL para mostrar el reloj. Preparacin del dispositivo BLUETOOTH Si conecta un dispositivo BLUETOOTH adecuado, puede escuchar msica o realizar llamadas con manos libres. Para obtener ms informacin acerca de la conexin, consulte las instrucciones de funcionamiento suministradas con el dispositivo. Antes de conectar el dispositivo, apague el volumen de esta unidad; si no lo hace, puede orse un sonido fuerte. Emparejamiento y conexin con otro dispositivo BLUETOOTH Cuando conecte un dispositivo BLUETOOTH
(telfono celular, dispositivo de audio, etc.) por primera vez es necesario el registro de ambos dispositivos (denominado emparejamiento). El emparejamiento permite que la unidad y otros dispositivos se reconozcan entre s. 1 Coloque el dispositivo BLUETOOTH dentro de 1 m de distancia respecto de la unidad. 7ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Izquier da ML.book Page 8 Friday, March 14, 2014 9:35 AM 2 Presione CALL, gire el selector de control para seleccionar [PAIRING] y, a continuacin, presinelo. parpadea. La unidad entrar en modo de espera de emparejamiento. 3 Realice el emparejamiento en el dispositivo BLUETOOTH para detectar esta unidad. 4 Seleccione [Sony Car Audio] que se muestra en la pantalla del dispositivo de BLUETOOTH. Si [Sony Car Audio] no aparece, repita desde el paso 2. 5 Si se requiere una clave * en el dispositivo BLUETOOTH, escriba [0000].
* La clave de paso puede denominarse clave de acceso, cdigo PIN, nmero PIN o contrasea etc. en funcin del dispositivo. Introduzca la clave
[0000]
Cuando se empareja, queda encendida. 6 Seleccione esta unidad en el dispositivo BLUETOOTH para establecer la conexin BLUETOOTH. o se enciende cuando la conexin est establecida. Nota Mientras se conecta a un dispositivo BLUETOOTH, esta unidad no puede detectarse desde otro dispositivo. Para habilitar la deteccin, acceda al modo de emparejamiento y busque esta unidad desde otro dispositivo. Para cancelar el emparejamiento Realizar el paso 2 para cancelar el modo de emparejamiento luego de que esta unidad y el dispositivo BLUETOOTH estn emparejados. 8ES Conexin con un dispositivo BLUETOOTH emparejado Para utilizar un dispositivo emparejado, es necesaria la conexin con esta unidad. Algunos dispositivos emparejados se conectarn automticamente. 1 Presione CALL, gire el selector de control para seleccionar [BT SIGNL] y, a continuacin, presinelo. Asegrese de que se encienda. 2 Active la funcin BLUETOOTH en el dispositivo BLUETOOTH. 3 Inicie el dispositivo BLUETOOTH para conectarlo a esta unidad. o se enciende. Iconos en la pantalla:
Se enciende cuando un telfono celular se conecta a la unidad. Se enciende cuando un dispositivo de audio se conecta a la unidad. Indica la potencia de la seal del telfono celular al que se conecta. Para conectar el dispositivo que se conect por ltima vez en esta unidad Active la funcin BLUETOOTH en el dispositivo BLUETOOTH. Presione SRC. Seleccione [BT PHONE] o [BT AUDIO]. Presione ENTER para conectar con el telfono celular, o PAUSE para conectar con el dispositivo de audio. Nota Mientras trasmite audio BLUETOOTH, no puede realizar la conexin de esta unidad al telfono celular. Realice en cambio la conexin desde el telfono celular a la unidad. Sugerencia Con la seal BLUETOOTH activada: si el encendido se ajusta en la posicin ON, la unidad vuelve a conectarse automticamente al ltimo telfono celular conectado. Para instalar el micrfono Para obtener detalles sobre cmo conectar el micrfono, consulte el manual suministrado de Instalacin/Conexiones. MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Derech a ML.book Page 9 Friday, March 14, 2014 9:35 AM Conectar con un smartphone a travs de One touch (NFC) Al tocar el selector del control de la unidad con un smartphone compatible con NFC*, la unidad est emparejada y automticamente conectada con el smartphone.
* NFC (Transmisin de datos en proximidad) es una tecnologa que permite la comunicacin inalmbrica de corto rango entre varios dispositivos, como telfonos mviles y etiquetas de IC. Gracias a la funcin de NFC, la comunicacin de datos se puede alcanzar fcilmente con solo tocar el smbolo o ubicacin sealados en dispositivos compatibles con tecnologa NFC. Para un smartphone con Android OS 4.0 o inferior instalado, se requiere descargar la aplicacin NFC Easy Connect disponibles en Google Play. Es posible que la aplicacin no est disponible para su descarga en algunos pases/regiones. 1 Activacin de la funcin NFC en un smartphone. Para obtener ms informacin, consulte las instrucciones de funcionamiento suministradas con el smartphone. 2 Toque la parte de la marca N de la unidad con la parte de la marca N del smartphone. Asegrese que la unidad. se encienda en la pantalla de Para desconectar mediante One touch Toque nuevamente la parte marca N de la unidad con la parte de la marca N del smartphone. Notas Al realizar la conexin, manipule el smartphone cuidadosamente para evitar raspaduras. La conexin One touch no es posible cuando la unidad ya est conectada a otro dispositivo compatible con tecnologa NFC. En este caso, desconecte el dispositivo y haga conexin con el smartphone nuevo. Conectar con un iPhone/iPod
(emparejamiento automtico BLUETOOTH ) Cuando se conecta un iPhone/iPod con iOS5 o superior instalado al puerto USB, la unidad es automticamente emparejada y conectada con el iPhone/iPod. Para activar emparejamiento automtico BLUETOOTH, asegrese de que [AUTO PAIRING] en la instalacin BT est fijado en [ON] (pgina 22). 1 Active la funcin BLUETOOTH en el iPhone/iPod. 2 Conecte un iPhone/iPod al puerto USB. Asegrese que la unidad. se encienda en la pantalla de Nota El emparejamiento automtico BLUETOOTH no es posible cuando la unidad ya est conectada a otro dispositivo BLUETOOTH. En este caso, desconecte el otro dispositivo y luego conecte otra vez el iPhone/
iPod. Conexin de un dispositivo iPod/USB 1 Baje el volumen de la unidad. 2 Conecte el dispositivo iPod/USB a la unidad. Para conectar un iPod/iPhone, utilice el cable de conexin USB para iPod (no suministrado). Al conectar un iPhone 5 Para MEX-GS810BH, el puerto USB posterior tambin est disponible. 9ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Izquier da ML.book Page 10 Friday, March 14, 2014 9:35 AM Conexin de otro dispositivo de audio porttil 1 Apague el dispositivo de audio porttil. 2 Baje el volumen de la unidad. 3 Conecte el dispositivo de audio porttil a la toma de entrada AUX (minitoma estreo) en la unidad con un cable de conexin* (no suministrado).
* Asegrese de utilizar una clavija recta. 4 Presione SRC para seleccionar [AUX]. Coincidencia del nivel de volumen del dispositivo conectado con otras fuentes Comience la reproduccin del dispositivo de audio porttil en un nivel moderado y configure su nivel habitual de volumen en la unidad. Presione MENU y gire el selector de control. Seleccione [SOUND] [AUX VOL] (pgina 21). Escuchar la radio/SiriusXM Escuchar la radio Para escuchar una estacin de radio, presione SRC para seleccionar [TUNER]. Programa de servicio de datos: contribuye a una experiencia superior del usuario de la tecnologa HD Radio. Presenta nombre de la cancin, artista, ID de estaciones, Gua de canales HD2/HD3 y otros flujos de datos relevantes. Adyacentes a las principales estaciones tradicionales se encuentran los canales FM locales adicionales. Estos canales HD2/HD3 proporcionan msica nueva y original, as como cortes profundos del gnero tradicional. Sonido digital de la calidad de un CD. La tecnologa HD Radio permite que las estaciones de radio locales emitan una seal digital limpia. La frecuencia AM se escucha igual que la frecuencia FM actual, y la frecuencia FM se escucha igual que un CD. El etiquetado de iTunes le ofrece la oportunidad para descubrir una amplia variedad de contenido y un medio para etiquetar ese contenido, consultarlo y comprarlo ms adelante desde la tienda de iTunes. Para obtener ms informacin, visite el siguiente sitio web: http://www.hdradio.com/
Almacenamiento y recepcin de emisoras Precaucin Al sintonizar estaciones mientras conduce, utilice BTM (Memoria de la mejor sintona) para evitar un accidente. 10ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Derech a ML.book Page 11 Friday, March 14, 2014 9:35 AM Almacenamiento automtico (BTM) 1 Presione MODE para cambiar la banda de radio (FM1, FM2, FM3, AM1 o AM2). 2 Presione MENU, gire el selector de control para seleccionar [GENERAL] y, a continuacin, presinelo. 3 Gire el selector de control para seleccionar [BTM] y, a continuacin, presinelo. La unidad almacena las emisoras en el orden de frecuencia en los botones numricos. Sintonizacin 1 Presione MODE para cambiar la banda de radio (FM1, FM2, FM3, AM1 o AM2). 2 Realice la sintonizacin. Para realizar la sintonizacin manual Mantenga presionado SEEK +/ para ubicar la frecuencia aproximada y, a continuacin, presinelo repetidas veces para ajustar la frecuencia deseada con mayor precisin. Para realizar la sintonizacin automtica Presione SEEK +/. La bsqueda se detiene cuando la unidad recibe una emisora. Repita este procedimiento hasta recibir la emisora deseada. Almacenamiento manual 1 Mientras recibe la emisora que desea almacenar, mantenga presionado un botn numrico (de 1 a 6) hasta que aparezca [MEM]. Recepcin de las emisoras almacenadas 1 Seleccione la banda y, a continuacin, presione un botn numrico (de 1 a 6). Acerca de la multidifusin FM Algunas estaciones FM de HD Radio proporcionan un programa principal y programa(s) complementario(s) (hasta 7) en la misma frecuencia. Seleccionar un programa complementario 1 Presione SEEK +/. Escuchar la radio satelital SiriusXM Activar la suscripcin a SiriusXM Solamente SiriusXM le brinda ms de lo que adora escuchar, todo en un lugar. Obtenga ms de 140 canales, entre ellos: msica gratuita comercial, ms los mejores deportes, noticias, charlas, comedias y entretenimiento. Bienvenido al mundo de la radio satelital. Se necesita un sintonizador para conectar a vehculos SiriusXM y una suscripcin. Para ms informacin, visite www.siriusxm.com Despus de instalar el sintonizador para conectar a vehculos SiriusXM y la antena, pulse SRC para seleccionar [SIRIUSXM]. Debe poder escuchar el canal de previsualizacin SiriusXM en el Canal 1. Despus de comprobar que puede escuchar el canal de previsualizacin, seleccione el Canal 0 para encontrar el ID de la radio de su sintonizador. El ID de la radio tambin se encuentra en la parte inferior del sintonizador para conectar a vehculos SiriusXM y en su empaque. Necesitar este nmero para activar su suscripcin. Escriba el nmero para tenerlo de referencia. En los Estados Unidos, puede activar a travs de Internet o Atencin al oyente de SiriusXM:
Por Internet: visite www.siriusxm.com/
activatenow Por telfono: Comunquese al 1-866-635-2349 Como parte del proceso de activacin, los satlites SiriusXM enviarn un mensaje de activacin a su sintonizador. Cuando su radio detecte que el sintonizador ha recibido el mensaje de activacin, su radio mostrar: [SUBSCRIPTION UPDATED -
ENTER TO CONTINUE]. Una vez realizada la suscripcin, puede sintonizar los canales de su plan de suscripcin. Notas El proceso de activacin suele tomar de 10 a 15 minutos, pero puede tomar hasta una hora. Necesitar encender la radio y recibir la seal de SiriusXM a fin de recibir el mensaje de activacin. Seleccionar canales para SiriusXM 1 Presione 2 Gire el selector de control para
(navegar). seleccionar el canal deseado y, a continuacin, presinelo. Para seleccionar canales desde categoras 1 Mantenga presionado CAT. 11ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Izquier da ML.book Page 12 Friday, March 14, 2014 9:35 AM 2 Gire el selector de control para seleccionar la categora deseada y, a continuacin, presinelo. Para almacenar canales 1 Mientras recibe el canal que desea almacenar, mantenga presionado un botn numrico (de 1 a 6) hasta que aparezca [MEM]. Para recibir el canal guardado, presione MODE para seleccionar [SX1], [SX2] o [SX3], luego presione un botn numrico (de 1 a 6). Para establecer un control parental La funcin de control parental le permite limitar el acceso a los canales SiriusXM con contenido para adultos. Cuando se activa, la funcin de control parental le exige ingresar una contrasea para sintonizar los canales bloqueados. La informacin para configurar la contrasea y el bloqueo de los canales se pueden encontrar a continuacin. 1 Presione MENU y gire el selector de control. 2 Seleccione [GENERAL] [PARENTAL] [LOCK SEL]
[LOCK-ON]. 3 Introduzca la contrasea, luego presione ENTER. La contrasea inicial es [0000]. Para desbloquear los canales, seleccione [OFF]. Para cambiar la contrasea 1 Presione MENU y gire el selector de control. 2 Seleccione [GENERAL] [PARENTAL] [CODE EDIT]. 3 Introduzca la contrasea actual en la pantalla de entrada de la contrasea actual, luego presione ENTER. La contrasea inicial es [0000]. 4 Introduzca su nueva contrasea de 4 dgitos en la pantalla de entrada de la contrasea actual, luego presione ENTER. Para cambiar los elementos de pantalla Mantenga presionado DSPL, luego presinelo otra vez para cambiar como se indica a continuacin:
Nmero de canal (estndar) Nombre del canal Nombre del artista Ttulo de la cancin Informacin del contenido Nombre de la categora Reloj Etiquetado de iTunes Con la funcin Etiquetar de iTunes, puede etiquetar canciones que escucha mientras escucha las estaciones SiriusXM o HD Radio. La informacin de la cancin se guarda en la unidad hasta que conecte su iPod y luego se transfiere a su iPod. Cuando su iPod est conectado a iTunes, podr previsualizar y comprar las canciones que escuch mientras escuchaba las estaciones SiriusXM o HD Radio. Para conocer detalles sobre modelos de iPod compatibles, vea Acerca de iPod (pgina 24). 12ES Para conocer detalles sobre el Etiquetado de iTunes y los ltimos modelos compatibles con esta funcin, consulte el sitio web de iTunes en:
http://www.apple.com/itunes/
Para conocer detalles sobre cmo comprar una cancin utilizando informacin Etiquetada, consulte el sitio web de iTunes en:
http://www.apple.com/support/itunes/
1 Presione TAG cuando est encendido el indicador TAG. El indicador TAG se enciende cuando se emite informacin de la cancin en una estacin SiriusXM o HD Radio. El indicador TAG parpadea mientras recupera y guarda la informacin de la cancin. La informacin de la cancin se guarda en la unidad. 2 Conecte un iPod al puerto USB para transferir los datos. Si ya hay un iPod conectado, los datos se transferirn de inmediato. Se muestra [TRANSFER] en la pantalla y comienza a parpadear durante la transferencia. 3 Sincronice el iPod con la computadora. Las canciones se mostrarn en una lista de reproduccin Etiquetada en iTunes. Notas Si se presiona TAG justo despus del comienzo de una cancin o justo antes de finalizada la cancin, la unidad puede recuperar la informacin de la cancin anterior o siguiente, adems de aquella de la cancin actual. La cantidad mxima de canciones etiquetada que puede guardar en esta unidad es 50. Despus de haber transferido las canciones etiquetadas al iPod, estas se borrarn de la unidad de manera automtica. Para eliminar todas las canciones etiquetadas antes de la transferencia 1 Presione MENU, gire el selector de control para seleccionar [GENERAL] y, a continuacin, presinelo. 2 Gire el selector de control para seleccionar [TAG DEL] y, a continuacin, presinelo. 3 Gire el selector de control para seleccionar [YES] y, a continuacin, presinelo. MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Derech a ML.book Page 13 Friday, March 14, 2014 9:35 AM Reproduccin Reproduccin de un disco 1 Inserte el disco (con la etiqueta orientada hacia arriba). La reproduccin se inicia automticamente. Reproduccin de un dispositivo iPod/USB En este Manual de instrucciones, iPod se utiliza como referencia general para las funciones del iPod en un iPod y un iPhone, a menos que se especifique lo contrario en el texto o en las ilustraciones. Para obtener ms informacin acerca de la compatibilidad de su iPod, consulte Acerca de iPod (pgina 24) o visite el sitio web de soporte tcnico que figura en la cubierta posterior. Es posible utilizar dispositivos USB de almacenamiento masivo (MSC), como unidades flash USB, reproductores multimedia y telfonos Android, que cumplan con el estndar USB. Segn el telfono Android o reproductor multimedia, se requiere que se le ajuste el modo de conexin USB a MSC. Notas Para obtener ms informacin acerca de la compatibilidad del dispositivo USB, visite el sitio web de soporte tcnico que figura en la cubierta posterior. No es posible reproducir los archivos MP3/WMA/WAV que se indican a continuacin. archivos con formato de compresin sin prdida;
archivos protegidos por derechos de autor;
archivos DRM (Gestin de derechos digitales);
archivos de audio de canales mltiples 1 Conecte el dispositivo iPod/USB al puerto USB (pgina 9). Se inicia la reproduccin. Si ya est conectado un dispositivo, para iniciar la reproduccin pulse SRC para seleccionar USB
(IPD aparece en la pantalla cuando se reconoce el iPod). Para MEX-GS810BH, presione SRC para seleccionar [USB1] para el puerto USB frontal,
[USB2] para el puerto USB en la parte posterior. 2 Ajuste el volumen de esta unidad. Para detener la reproduccin Mantenga presionado OFF por un segundo. Para extraer el dispositivo Detenga la reproduccin y extraiga el dispositivo. Precaucin para iPhone Al conectar un iPhone mediante USB, el volumen de las llamadas telefnicas es controlado por el iPhone, y no por la unidad. Trate de no subir el volumen de la unidad durante una llamada sin darse cuenta, ya que puede producirse un sonido fuerte y repentino al terminar la llamada. Utilizacin directa del iPod (Control de pasajero) Mantenga presionado MODE durante la reproduccin para que aparezca [MODE IPOD] y habilitar la operacin directamente en el iPod. Tenga en cuenta que solamente es posible ajustar el volumen en la unidad. Para salir del modo de control de pasajero Mantenga presionado MODE para que aparezca
[MODE AUDIO]. Reproduccin de un dispositivo BLUETOOTH Puede reproducir contenido en un dispositivo conectado que sea compatible con BLUETOOTH A2DP (Perfil de distribucin de audio avanzado). 1 Haga una conexin BLUETOOTH con el dispositivo de audio (pgina 7). 2 Presione SRC para seleccionar [BT AUDIO]. 3 Para comenzar la reproduccin, utilice las funciones del dispositivo de audio. 4 Ajuste el volumen de esta unidad. 13ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Izquier da ML.book Page 14 Friday, March 14, 2014 9:35 AM Notas En funcin del dispositivo de audio, es posible que no se muestre en esta unidad cierta informacin como, por ejemplo, el ttulo, el nmero de pista y la duracin y el estado de la reproduccin. Incluso si se cambia la fuente en la unidad, la reproduccin de la seal del dispositivo de audio no se interrumpe.
[BT AUDIO] no aparece en la pantalla mientras se ejecuta la aplicacin App Remote mediante la funcin BLUETOOTH. Para hacer coincidir el nivel de volumen del dispositivo BLUETOOTH con otras fuentes Comience la reproduccin del dispositivo de audio porttil BLUETOOTH en un nivel moderado y configure su nivel habitual de volumen en la unidad. Presione MENU y gire el selector de control. Seleccione [SOUND] [BTA VOL] (pgina 21). Bsqueda y reproduccin de pistas Reproduccin repetida y aleatoria 1 Durante la reproduccin, presione
(repetir), para seleccionar reproduccin repetida, o
(reproduccin aleatoria) para reproduccin aleatoria. 2 Presione
(repetir) o
(repeticin aleatoria) varias veces para elegir el modo de reproduccin deseado. Es posible que la reproduccin en el modo de reproduccin seleccionado se demore en iniciar. Los modos de reproduccin disponibles varan en funcin de la fuente de sonido seleccionada. Bsqueda de una pista por nombre
(Quick-BrowZer) 1 Durante la reproduccin de los dispositivos de audio CD, USB o BT*1 presione la lista de categoras de bsqueda. Cuando aparece la lista de pistas, presione
(navegar)*2 para desplegar
(volver) repetidamente hasta que aparezca la categora de bsqueda deseada.
*1 Disponible solamente para dispositivos de audio que soporten AVRCP (Perfil de control remoto audio/video) 1.4 o superior. 14ES
*2 Durante la reproduccin USB, presione
(navegar) durante ms de 2 segundos para volver directamente al inicio de la lista de categoras. 2 Gire el selector de control para seleccionar la categora de bsqueda deseada y, a continuacin, presinelo para confirmarla. 3 Repetir el paso 2 para buscar la pista deseada. Se inicia la reproduccin. Para salir del modo Quick-BrowZer Presione
(navegar). Bsqueda mediante omisin de elementos (Modo Saltar) 1 Presione 2 Presione SEEK +. 3 Gire el selector de control para
(navegar). seleccionar el elemento. Se realizan omisiones en pasos del 10 % de la cantidad total de elementos presentes en la lista. 4 Presione ENTER para volver al modo Quick-BrowZer. Aparecer el elemento seleccionado. 5 Gire el selector de control para seleccionar el elemento deseado y, a continuacin, presinelo. Se inicia la reproduccin. MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Derech a ML.book Page 15 Friday, March 14, 2014 9:35 AM Escuchar Pandora Pandora se encuentra disponible para transmitir msica a travs de su telfono iPhone, Android y BlackBerry. Puede controlar Pandora en un iPhone conectado por USB o un telfono Android/
BlackBerry conectado por BLUETOOTH desde esta unidad. El servicio Pandora no se encuentra disponible en algunos pases/algunas regiones. Preparacin para Pandora 1 Para verificar los dispositivos compatibles, visite el sitio web de servicio tcnico que se indica en la cubierta posterior. 2 Descargue la ltima versin de la aplicacin Pandora desde la tienda de aplicaciones de su smartphone. Puede encontrar una lista de dispositivos compatibles en www.pandora.com/everywhere/mobile Solamente para telfonos Android Usted no puede controlar Pandora por medio de la funcin BLUETOOTH mientras se ejecuta la aplicacin App Remote por medio de BLUETOOTH. Transmitir Pandora 1 Conecte esta unidad con el dispositivo mvil. iPhone por medio de USB (pgina 9) Telfono Android/BlackBerry por medio de la funcin BLUETOOTH (pgina 7) 2 Presione SRC para seleccionar
[PANDORA USB] o [BT PANDORA]. 3 Ejecute la aplicacin Pandora en el dispositivo mvil. 4 Presione PAUSE para comenzar la reproduccin. Si aparece el nmero de dispositivo Asegrese de que se muestran los mismos nmeros (por ejemplo, 123456) en esta unidad y el dispositivo mvil, luego presione ENTER en esta unidad y seleccione [Yes] en el dispositivo mvil. Al activar la funcin BLUETOOTH Puede ajustar el nivel de volumen. Presione MENU y gire el selector de control. Seleccione [SOUND] [BTA VOL] (pgina 21). Operaciones disponibles en Pandora Devolucin pulgares La devolucin de pulgares hacia arriba o pulgares hacia abajo le permite personalizar las estaciones. Pulgares hacia arriba Durante la reproduccin, presione . Pulgares hacia abajo Durante la reproduccin, presione . Utilizar la lista de estaciones La lista de estaciones le permite seleccionar fcilmente una estacin deseada. 1 Durante la reproduccin, presione
(navegar). 2 Presione SEEK + para seleccionar el orden de clasificacin [BY DATE] o [A TO Z]. 3 Gire el selector de control para seleccionar la estacin deseada y, a continuacin, presinelo. Se inicia la reproduccin. Favoritos La pista y el artista que se est reproduciendo pueden marcarse como favoritos y guardarse en su cuenta Pandora. 1 Durante la reproduccin, presione MODE. 15ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Izquier da ML.book Page 16 Friday, March 14, 2014 9:35 AM 4 Gire el selector de control para seleccionar un nmero de la lista de nmeros y, a continuacin, presinelo. Comienza la llamada telefnica. Realizacin de llamadas desde el historial de llamadas 1 Presione CALL, gire el selector de control para seleccionar [RECENT CALL] y, a continuacin, presinelo. Aparece una lista del historial de llamadas. 2 Gire el selector de control para seleccionar un nombre o un nmero telefnico del historial de llamadas y, a continuacin, presinelo. Comienza la llamada telefnica. Realizacin de llamadas mediante la introduccin de un nmero de telfono 1 Presione CALL, gire el selector de control para seleccionar [DIAL NUMBER] y, a continuacin, presinelo. 2 Gire el selector de control para ingresar el nmero de telfono y finalmente seleccione [ ] (espacio), luego, presione el botn ENTER*. Comienza la llamada telefnica.
* Para mover la indicacin digital, presione SEEK +/. Nota En la pantalla aparecer [_] en lugar de [#]. Realizacin de llamadas mediante repeticin de marcado 1 Presione CALL, gire el selector de control para seleccionar [REDIAL] y, a continuacin, presinelo. Comienza la llamada telefnica. Realizacin de llamadas con manos libres Para usar un telfono celular, conctelo a esta unidad. Para obtener ms informacin, consulte Preparacin del dispositivo BLUETOOTH
(pgina 7). Rechazo de llamadas 1 Presione CALL cuando reciba una llamada con un tono de llamada. Comienza la llamada telefnica. Nota El tono de llamada y la voz del auricular solamente salen de los altavoces frontales. Para rechazar la llamada Mantenga presionado OFF por un segundo. Para finalizar una llamada Presione CALL nuevamente. Realizacin de llamadas Puede realizar una llamada desde la libreta de direcciones o desde el historial de llamadas cuando un telfono celular que sea compatible con PBAP
(Perfil de acceso a la agenda telefnica) est conectado. Realizacin de llamadas desde la agenda telefnica 1 Presione CALL, gire el selector de control para seleccionar [PHONEBOOK] y, a continuacin, presinelo. 2 Gire el selector de control para seleccionar una inicial de la lista de iniciales y, a continuacin, presinelo. 3 Gire el selector de control para seleccionar un nombre de la lista de nombres y, a continuacin, presinelo. 16ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Derech a ML.book Page 17 Friday, March 14, 2014 9:35 AM Tareas disponibles durante la llamada Para configurar previamente el volumen del tono de llamada y del auricular Puede predefinir el volumen del tono de llamada y del auricular. Ajuste del volumen del tono de llamada:
Gire el selector de control mientras recibe la llamada. Ajuste del volumen del auricular:
Gire el selector de control durante una llamada. Para ajustar el volumen para otra persona
(Ajuste de ganancia de micrfono) Presione MIC. Niveles de volumen ajustables: [MIC-LOW], [MIC-
MID], [MIC-HI]. Para reducir el eco y el ruido (Cancelador de ecos/Modo cancelador de ruidos) Mantenga presionado MIC. Modo ajustable: [EC/NC-1], [EC/NC-2]. Para transferir una llamada Para activar o desactivar el dispositivo correcto
(esta unidad o el telfono celular), presione MODE o use el telfono celular. Nota En funcin del telfono celular, es posible que la conexin de manos libres se interrumpa al intentar transferir una llamada. Para revisar el estado de SMS/correo electrnico*
parpadea cuando se recibe un nuevo SMS/
correo electrnico, y permanece iluminado cuando hay mensajes no ledos.
* Disponible solamente para telfonos celulares que soportan MAP (Perfil de acceso a mensajes). Marcacin predefinida de nmeros telefnicos Es posible almacenar hasta 6 contactos en la marcacin predefinida. 1 Seleccione un nmero de telfono que desee almacenar en la marcacin predefinida, de la agenda telefnica, el historial de llamadas* o bien ingresando directamente el nmero. El nmero de telfono aparecer en la pantalla de esta unidad. 2 Mantenga presionado un botn numrico (de 1 a 6) hasta que aparezca
[MEM]. El contacto se almacena en el nmero predefinido que seleccione. Realizacin de llamadas mediante nmeros predefinidos 1 Presione SRC, gire el selector de control para seleccionar [BT PHONE], y, a continuacin, presinelo. 2 Presione un botn numrico (1 a 6) para seleccionar el contacto al que desea llamar. 3 Presione ENTER. Comienza la llamada telefnica. Llamada por etiquetas de voz Haga una llamada al decir la etiqueta de voz almacenada en un telfono celular conectado que tenga una funcin de marcado por voz. 1 Presione CALL, gire el selector de control para seleccionar [VOICE DIAL] y, a continuacin, presinelo. Alternativamente, presione ENTER mientras la funcin App Remote se encuentra apagada. 2 Mencione la etiqueta de voz almacenada en el telfono celular. Se reconocer su voz y se realizar la llamada. Para cancelar la marcacin por voz Presione ENTER. 17ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Izquier da ML.book Page 18 Friday, March 14, 2014 9:35 AM Funciones tiles App Remote con iPhone/
Android Phone Se requiere la descarga de la aplicacin App Remote desde App Store para el iPhone o desde Google Play para telfonos Android. Mediante la aplicacin App Remote, las siguientes caractersticas estn disponibles:
Operar la unidad para iniciar y controlar aplicaciones compatibles en iPhone/telfono con Android. Operar el telfono con Android/el iPhone con seales simples de dedos para controlar la fuente de la unidad. Iniciar una aplicacin/fuente de audio o buscar la palabra clave en la aplicacin al decir una palabra o frase en el micrfono (solamente telfonos Android). Leer mensajes de texto entrantes, SMS, correo electrnico, Twitter, Facebook, calendario, etc., y se pueden responder los mensajes de texto, SMS y correo electrnico automticamente
(solamente telfonos Android). Ajustar los parmetros del sonido (EQ10, Balance/Fader, posicin de escucha) de la unidad a travs de telfonos iPhone/Android. Notas Por su seguridad, cumpla con las regulaciones y leyes de trfico locales y no utilice la aplicacin mientras maneja. Las operaciones disponibles varan en funcin de la aplicacin. Para obtener ms informacin sobre las aplicaciones disponibles, visite el sitio web de servicio tcnico que se indica en la cubierta posterior. App Remote ver. 2.0 mediante USB es compatible con iPhones con iOS 5/iOS 6 instalados. App Remote ver. 2.0 mediante BLUETOOTH es compatible con dispositivos con Android que tengan Android 2.2, 2.3, 3.*, 4.0, 4.1 o 4.2 instalados. Es posible que la funcin de reconocimiento de voz no funcione dependiendo de su smartphone. En ese caso, vaya a [Configuracin] y seleccione
[Reconocimiento de voz]. La lectura de SMS/correo electrnico/notificaciones est disponible para dispositivos Android con motor TTS instalado. La aplicacin Smart Connect, proporcionada por Sony Mobile Communications, es necesaria para la notificacin de lectura de Twitter/Facebook/
calendario, etc. 18ES Establecer la conexin App Remote 1 Conecte el iPhone al puerto USB o el telfono Android con la funcin BLUETOOTH. 2 Inicie la aplicacin App Remote. 3 Mantenga presionado (APP) en la unidad por ms de 2 segundos. Comienza la conexin con su telfono iPhone/
Android. Para obtener ms detalles acerca del funcionamiento del iPhone/telfono Android, consulte la ayuda de la aplicacin. Si aparece el nmero de dispositivo Asegrese de que se muestran los mismos nmeros (por ejemplo, 123456) en esta unidad y el dispositivo mvil, luego presione ENTER en esta unidad y seleccione [Yes] en el dispositivo mvil. Para finalizar la conexin Mantenga presionado APP. Seleccionar la fuente o aplicacin Puede operar la unidad para seleccionar la fuente o aplicacin deseada en su smartphone. 1 Gire el selector de control para seleccionar la fuente o aplicacin deseados y, a continuacin, presinelo. Para seleccionar otra fuente o aplicacin, presione SRC y, a continuacin, gire el selector de control para seleccionar la fuente o aplicacin deseados. Anuncio de diversas informaciones por medio de la gua de voz (solamente para telfonos Android ) Cuando se recibe SMS/correo electrnico, notificaciones de Twitter/Facebook/Calendario, etc., estas se anuncian automticamente a travs de los parlantes del auto. Para detalles sobre configuraciones, consulte la ayuda de la aplicacin. MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Derech a ML.book Page 19 Friday, March 14, 2014 9:35 AM Activar el reconocimiento de voz
(solamente para telfonos Android) Al registrar aplicaciones, usted puede controlar una aplicacin por comando de voz. Para ms detalles, consulte la ayuda de la aplicacin. Para activar el reconocimiento de voz 1 Presione ENTER para activar el reconocimiento de voz. 2 Diga por el micrfono el comando de voz deseado cuando [Say Source or App] aparece en el telfono Android. Notas En algunos casos, el reconocimiento de voz puede no estar disponible. El reconocimiento de voz puede no funcionar correctamente dependiendo de funcionamiento del telfono Android conectado. Opere bajo las condiciones donde el sonido como por ejemplo el sonido del motor se minimice durante el reconocimiento de voz. Cuando se selecciona una aplicacin de msica o video*
Presione 1 o 2 para ingresar en el modo HID, y presione SEEK +/- para seleccionar un elemento de reproduccin, luego presione ENTER para comenzar la reproduccin.
* Disponible solamente para un telfono Android que soporte HID (Perfil de dispositivo de interfaz humana). Realizar configuraciones de sonido Puede ajustar las configuraciones para EQ, BAL/
FAD/SW Level y Position por medio de su smartphone. Ajustes Cancelacin del modo DEMO Puede cancelar la pantalla de demostracin que aparece mientras la unidad est apagada. 1 Presione MENU, gire el selector de control para seleccionar [DISPLAY] y, a continuacin, presinelo. 2 Gire el selector de control para seleccionar [DEMO] y, a continuacin, presinelo. 3 Gire el selector de control para seleccionar [DEMO-OFF] y, a continuacin, presinelo. El ajuste finaliz. 4 Presione
(volver) dos veces. La pantalla vuelve al modo de recepcin/
reproduccin normal. Operacin bsica de ajustes Puede ajustar los elementos en el men con el siguiente procedimiento. Los siguientes elementos pueden ajustarse en funcin de la fuente y de la configuracin. 1 Presione MENU. 2 Gire el selector de control para seleccionar la categora de configuracin y, a continuacin, presinela. Las categoras de configuracin son las siguientes:
Configuracin GENERAL (pgina 20) Configuracin SOUND (pgina 20) Configuracin DISPLAY (pgina 22) Configuracin BT (BLUETOOTH) (pgina 22) Configuracin APP REM (App Remote)
(pgina 22) 3 Gire el selector de control para seleccionar las opciones y, a continuacin, presinelas. Para detalles sobre configuraciones, consulte la ayuda de la aplicacin. Para volver a la pantalla anterior Presione
(volver). 19ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Izquier da ML.book Page 20 Friday, March 14, 2014 9:35 AM Configuracin GENERAL CLOCK-ADJ (Ajuste del reloj) (pgina 7) CAUT ALM (Alarma de precaucin) Activa la alarma de precaucin: [ON], [OFF]
(pgina 7). (Solamente est disponible cuando la unidad est apagada.) BEEP Activa el sonido de los pitidos: [ON], [OFF]. AUTO OFF Permite apagar la alimentacin automticamente una vez transcurrido un perodo deseado cuando la unidad est apagada: [NO], [30S] (30 segundos), [30M]
(30 minutos), [60M] (60 minutos). AUX-A (Audio AUX) Activa la pantalla de fuente AUX: [ON], [OFF].
(Solamente est disponible cuando la unidad est apagada.) BTM (pgina 11) TAG DEL (eliminacin de etiqueta) Confirma que se eliminarn las etiquetas: [YES],
[NO] (pgina 12). (Disponible solamente cuando el sintonizador o el Sintonizador para vehculo SiriusXM Connect se encuentra seleccionado). PARENTAL Fija el control parental a [ON], [OFF], y edita la contrasea (pgina 12). (Disponible solamente cuando el Sintonizador para vehculo SiriusXM Connect se encuentra seleccionado). SXM RESET (reinicio de SiriusXM ) Inicializa la configuracin del sintonizador para conectar SiriusXM (canales predefinidos/control parental): [ON], [OFF]. (Disponible solamente cuando el Sintonizador para vehculo SiriusXM Connect se encuentra seleccionado). Configuracin SOUND C.AUDIO+ (sonido ntido+) Reproduce el sonido al optimizar la seal digital con los ajustes de sonido recomendados por Sony: [ON], [OFF]. (Se fija automticamente a
[OFF] cuando se cambia [EQ10 PRESET]). 20ES EQ10 PRESET Seleccione una curva de ecualizador desde 10 curvas ecualizadoras o desactivado: [R AND B],
[ROCK], [POP], [DANCE], [HIP-HOP],
[ELECTRONICA], [JAZZ], [SOUL], [COUNTRY],
[CUSTOM], [OFF]. El ajuste de la curva de ecualizador se puede memorizar para cada fuente. EQ10 SETTING Ajuste [CUSTOM] de EQ10. BASE Selecciona una curva de ecualizador predefinida como base para futuros ajustes: [BAND1] 32 Hz,
[BAND2] 63 Hz, [BAND3] 125 Hz, [BAND4] 250 Hz,
[BAND5] 500 Hz, [BAND6] 1 kHz, [BAND7] 2 kHz,
[BAND8] 4 kHz, [BAND9] 8 kHz, [BAND10] 16 kHz. El nivel de volumen puede ajustarse en intervalos de 1 dB desde 6 dB hasta +6 dB. POSITION (posicin de escucha) SET F/R POS (configurar posicin frontal/
posterior) Simula un campo de sonido natural mediante el retardo de la salida de sonido desde los altavoces frontales/posteriores para adecuarse a su posicin. FRONT L (): izquierda delantera FRONT R (): derecha delantera FRONT (): delantera frontal ALL (): en el centro del automvil CUSTOM: Posicin configurada por App Remote OFF: sin configuracin de posicin ADJ POSITION* (ajustar posicin) Sintoniza con mayor precisin el ajuste de la posicin de escucha. Rango ajustable: [+3] [CENTER] [-3]. SET SW POS* (ajuste de la posicin del altavoz potenciador de graves) NEAR (): cerca NORMAL (): normal FAR (): lejos BALANCE Permite ajustar el balance de sonido: [RIGHT-15],
[CENTER], [LEFT-15]. FADER Permite ajustar el nivel relativo: [FRONT-15],
[CENTER], [REAR-15]. MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Derech a ML.book Page 21 Friday, March 14, 2014 9:35 AM DSEE (motor potenciador de sonido digital) Mejora el sonido comprimido digitalmente, ya que restaura las altas frecuencias que se pierden en el proceso de compresin. Este ajuste se puede memorizar para cada fuente diferente al sintonizador. Selecciona el modo DSEE: [ON], [OFF]. LOUDNESS Refuerza los graves y agudos para obtener un sonido claro a niveles de volumen bajos: [ON],
[OFF]. AAV (volumen automtico avanzado) Ajuste el nivel de volumen de reproduccin de todas las fuentes de reproduccin al nivel ptimo: [ON], [OFF]. RB ENH (Potenciador posterior de sonidos graves) El Potenciador de sonidos graves posteriores mejora los sonidos graves, ya que aplica el ajuste del filtro de paso bajo a los altavoces posteriores. Esta funcin permite que los altavoces posteriores funcionen como altavoces potenciadores de graves si uno de ellos no est conectado. (Disponible solamente cuando [SW DIRECT] est configurado en [OFF]). RBE MODE (potenciador posterior de sonidos graves) Selecciona el potenciador posterior de sonidos graves: [1], [2], [3], [OFF]. LPF FREQ (frecuencia de filtro de paso bajo) Selecciona la frecuencia de corte del altavoz potenciador de graves: [50Hz], [60Hz], [80Hz],
[100Hz], [120Hz]. LPF SLOP (pendiente de filtro de paso bajo) Selecciona la pendiente LPF: [1], [2], [3]. SW DIREC (Conexin directa al altavoz potenciador de graves) Puede utilizar el altavoz potenciador de graves sin un amplificador de potencia cuando est conectado al cable del altavoz posterior.
(Disponible solamente cuando [RBE MODE] est configurado en [OFF]). Asegrese de conectar un altavoz potenciador de graves de 4 a 8 a cualquiera de los cables del altavoz posterior. No conecte un altavoz al otro cable de altavoz posterior. SW MODE (Modo de altavoz potenciador de graves) Selecciona el modo del altavoz potenciador de graves: [1], [2], [3], [OFF]. SW PHASE (Fase de altavoz potenciador de graves) Selecciona la fase del altavoz potenciador de graves: [NORM], [REV]. SW POS* (Posicin de altavoz potenciador de graves) Selecciona la posicin del altavoz potenciador de graves: [NEAR], [NORMAL], [FAR]. LPF FREQ (frecuencia de filtro de paso bajo) Selecciona la frecuencia de corte del altavoz potenciador de graves: [50Hz], [60Hz], [80Hz],
[100Hz], [120Hz]. LPF SLOP (pendiente de filtro de paso bajo) Selecciona la pendiente LPF: [1], [2], [3]. S.WOOFER (altavoz potenciador de graves) SW LEVEL (nivel de altavoz potenciador de graves) Ajusta el nivel de volumen del altavoz potenciador de graves:
[+10 dB] [0 dB] [-10 dB].
([ATT] aparece en pantalla con el ajuste ms bajo). SW PHASE (Fase de altavoz potenciador de graves) Selecciona la fase del altavoz potenciador de graves: [NORM], [REV]. SW POS* (Posicin de altavoz potenciador de graves) Selecciona la posicin del altavoz potenciador de graves: [NEAR], [NORMAL], [FAR]. LPF FREQ (frecuencia de filtro de paso bajo) Selecciona la frecuencia de corte del altavoz potenciador de graves: [50Hz], [60Hz], [80Hz],
[100Hz], [120Hz]. LPF SLOP (pendiente de filtro de paso bajo) Selecciona la pendiente LPF: [1], [2], [3]. HPF (Filtro de paso alto) HPF FREQ (frecuencia de filtro de paso alto) Permite seleccionar la frecuencia de corte del altavoz frontal/posterior: [OFF], [50Hz], [60Hz],
[80Hz], [100Hz], [120Hz]. HPF SLOP (pista de filtro de paso alto) Selecciona la pendiente HPF (efectivo solamente cuando [HPF FREQ] se ajusta en un valor diferente a [OFF]): [1], [2], [3]. AUX VOL (Nivel de volumen AUX) Ajusta el nivel de volumen de cada equipo auxiliar conectado: [+18 dB] [0 dB] [-8 dB]. Este ajuste elimina la necesidad de ajustar el nivel de volumen entre fuentes. BTA VOL (nivel de volumen de audio BLUETOOTH) Ajusta el nivel de volumen de cada dispositivo BLUETOOTH conectado: [+6 dB] [0 dB]
[-6 dB]. Este ajuste elimina la necesidad de ajustar el nivel de volumen entre fuentes.
* No aparece cuando [SET F/R POS] se ajusta en [OFF]. 21ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Izquier da ML.book Page 22 Friday, March 14, 2014 9:35 AM Configuracin BT (BLUETOOTH) Esta configuracin tambin se puede abrir presionando CALL. PAIRING (pgina 7) PHONEBOOK (pgina 16) REDIAL (pgina 16) RECENT CALL (pgina 16) VOICE DIAL (pgina 17) DIAL NUMBER (pgina 16) RINGTONE Selecciona si esta unidad o el telfono celular conectado emite el tono de llamadas: [1] (esta unidad), [2] (telfono celular). AUTO ANS (respuesta automtica) Ajusta la unidad para que responda automticamente una llamada entrante: [OFF]-
[1] (aproximadamente 3 segundos), [2]
(aproximadamente 10 segundos). AUTO PAIRING*
Enciende el BLUETOOTH emparejndose automticamente cuando el dispositivo iOS versin 5.0, o posterior, est conectado mediante USB: [ON], [OFF]. BT SIGNL (Seal BLUETOOTH) (pgina 8) Activa la funcin BLUETOOTH: [ON], [OFF]. BT INIT* (Inicializacin de la tecnologa BLUETOOTH) Inicia todos los ajustes relacionados con BLUETOOTH (informacin de emparejamiento, nmero predefinido, informacin de dispositivo, etc.). Cuando se desecha la unidad, se inicializan todos los ajustes. (Solamente est disponible cuando la unidad est apagada.)
* No aparece al presionar CALL. Para configurar el elemento, siga el procedimiento indicado en Operacin bsica de ajustes (pgina 19). Configuracin APP REM (App Remote) Establece y termina la funcin App Remote
(conexin). Configuracin DISPLAY DEMO (Demostracin) Activa la demostracin: [ON], [OFF]. DIMMER Cambia el brillo de la pantalla. AT (automtico) Se atena la pantalla automticamente al encender la luz. (Disponible solamente si el cable de control de iluminacin est conectado.) ON Se atena la pantalla. OFF Desactiva el atenuador. COLOR (color predefinido, iluminador de color dinmico) Permite seleccionar un color predefinido para la pantalla y los botones de la Unidad principal. Permite seleccionar entre 12 colores predefinidos, un color personalizado y 5 diseos predefinidos. CUSTOM-C (Color personalizado) Permite registrar un color personalizado para la pantalla y los botones. BASE Selecciona un color predefinido como base para la personalizacin posterior: [RGB RED], [RGB GRN], [RGB BLUE]. Gama de colores ajustables: [0] - [32] ([0] no se puede utilizar para todas las gamas de colores). DAYNIGHT Permite definir un color diferente para DAY/
NIGHT segn el ajuste del atenuador.
[DAY]: [DIMMER] ajustado en [OFF] o [AUTO]
(apaga la luz principal).
[NIGHT]: [DIMMER] ajustado en [ON] o [AUTO]
(enciende la luz principal). SND SYNC (Sincronizacin de sonidos) Selecciona el color con la sincronizacin de sonido: [ON], [OFF]. WHT MENU (Men Blanco) Es posible visualizar el men de manera ms clara (en blanco) sin preocuparse del ajuste del color: [ON], [OFF]. START-WHT (Arranque Blanco) Cuando se presiona SRC, la pantalla y los botones de la unidad principal se ponen en blanco una vez, luego cambia al color personalizado: [ON], [OFF]. AUTO SCR (Desplazamiento automtico) Permite desplazarse por los elementos de la pantalla automticamente: [ON], [OFF]. 22ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Derech a ML.book Page 23 Friday, March 14, 2014 9:35 AM Informacin complementaria Precauciones Deje que la unidad se enfre antes de usarla si el automvil ha estado estacionado bajo la luz directa del sol. No deje el panel frontal o los dispositivos de audio dentro del vehculo o podra causar fallas en el funcionamiento debido a las altas temperaturas bajo la luz directa del sol. La antena de alimentacin se extiende automticamente. Condensacin de humedad Si se produce condensacin de humedad en el interior de la unidad, extraiga el disco y espere una hora aproximadamente hasta que se haya secado por completo la unidad. De lo contrario, la unidad no funcionar correctamente. Para mantener sonido de alta calidad No derrame ningn tipo de lquido sobre la unidad o los discos. Notas sobre los discos No exponga los discos a la luz solar directa ni a fuentes de calor como, por ejemplo, conductos de aire caliente, ni los deje en el automvil estacionado bajo la luz solar directa. Antes de reproducir los discos, lmpielos con un pao. Hgalo desde el centro hacia los bordes. No utilice disolventes como bencina, diluyentes ni productos de limpieza disponibles en el mercado. Esta unidad se dise para reproducir discos que cumplen con el estndar Compact disc (CD). Los DualDisc y otros discos de msica codificados con tecnologas de proteccin de derechos de autor no cumplen el estndar Compact disc (CD), por lo que no podrn reproducirse con esta unidad. Discos que NO se pueden reproducir en esta unidad Discos con etiquetas, autoadhesivos o cinta adhesiva o papeles adheridos. Si utiliza este tipo de discos, puede provocar una falla de funcionamiento o daar el disco. Discos con formas no estandarizadas (por ejemplo, formas de corazn, cuadrado o estrella). Si lo intenta, puede daar la unidad. Discos 8 cm. Notas sobre los discos CD-R/CD-RW Nmero mximo de: (solamente CD-R/CD-RW) carpetas (lbumes): 150 (incluida la carpeta raz) archivos (pistas) y carpetas: 300 (si los nombres de carpeta o archivo contienen muchos caracteres, este nmero puede ser inferior a 300) caracteres que se pueden visualizar en el nombre de una carpeta o archivo: 32 (Joliet)/
64 (Romeo) Si un disco multisesin empieza con una sesin CD-DA, se reconoce como un disco CD-DA y las otras sesiones no se reproducen. Discos que NO se pueden reproducir en esta unidad CD-R/CD-RW de calidad de grabacin deficiente. CD-R/CD-RW grabados con un dispositivo de grabacin no compatible. CD-R/CD-RW no finalizados correctamente. CD-R/CD-RW que no se hayan grabado en formato CD de msica o en formato MP3 que cumpla la norma ISO9660 Level 1/Level 2, Joliet/Romeo o multisesin. Orden de reproduccin de los archivos MP3/WMA MP3/WMA Carpeta (lbum) Archivo MP3/WMA
(pista) 23ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Izquier da ML.book Page 24 Friday, March 14, 2014 9:35 AM Acerca de iPod Puede conectarse a los siguientes modelos de iPod. Actualice sus dispositivos iPod a la ltima versin de software antes de utilizarlos. Compatible con modelos iPhone/iPod Modelo compatible iPhone 5 iPhone 4s iPhone 4 iPhone 3GS iPhone 3G iPod touch (5 generacin) iPod touch (4 generacin) iPod touch (3 generacin) iPod touch (2 generacin) iPod classic iPod nano (7 generacin) iPod nano (6 generacin) iPod nano (5 generacin) iPod nano (4 generacin) iPod nano (3 generacin) USB Made for iPod y Made for iPhone indican que un accesorio electrnico se dise para conectarse especficamente a los dispositivos iPod o iPhone respectivamente, y que el fabricante obtuvo la certificacin necesaria para que cumpla con los estndares de rendimiento de Apple. Apple no se hace responsable del funcionamiento de este dispositivo en cumplimiento de los estndares de seguridad y normativa. Tenga en cuenta que el uso de este accesorio con el iPod o el iPhone puede afectar al rendimiento inalmbrico. Acerca de la funcin BLUETOOTH Qu es la tecnologa BLUETOOTH?
La tecnologa inalmbrica BLUETOOTH es una tecnologa de corto alcance que permite la comunicacin inalmbrica de datos entre dispositivos digitales, como un telfono celular y un auricular. La tecnologa inalmbrica BLUETOOTH tiene una cobertura de aproximadamente 10 metros. Lo habitual es conectar dos dispositivos, aunque algunos dispositivos pueden conectarse a varios dispositivos al mismo tiempo. 24ES No es necesario utilizar un cable para realizar la conexin ya que la tecnologa BLUETOOTH es inalmbrica. Tampoco es necesario que los dispositivos estn orientados entre s, como sucede con la tecnologa infrarroja. Por ejemplo, puede utilizar este tipo de dispositivos dentro de una bolsa o un bolsillo. La tecnologa BLUETOOTH es un estndar internacional admitido por millones de empresas en todo el mundo y que utilizan varias compaas a escala internacional. Acerca de la comunicacin BLUETOOTH La tecnologa inalmbrica BLUETOOTH tiene una cobertura de aproximadamente 10 metros. El rango mximo de comunicacin puede variar de acuerdo con los obstculos (personas, metales, paredes, etc.) o el entorno electromagntico. Las siguientes condiciones pueden afectar la sensibilidad de la comunicacin BLUETOOTH. La existencia de obstculos como, una persona, un objeto metlico o una pared, entre esta unidad y el dispositivo BLUETOOTH. El uso de dispositivos que utilicen una frecuencia de 2,4 GHz, como un dispositivo LAN inalmbrico, un telfono inalmbrico o un microondas cerca de la unidad. Como los dispositivos BLUETOOTH y las redes LAN inalmbricas (IEEE802.11b/g) utilizan la misma frecuencia, pueden producirse interferencias de microondas que provoquen el deterioro de la velocidad de comunicacin, la aparicin de ruido o una conexin no vlida si la unidad se utiliza cerca de un dispositivo LAN inalmbrico. En este caso, realice el procedimiento siguiente. Utilice esta unidad a una distancia mnima de 10 m del dispositivo LAN inalmbrico. Si utiliza esta unidad a menos de 10 m de un dispositivo LAN inalmbrico, apague el dispositivo LAN inalmbrico. Instale esta unidad y el dispositivo BLUETOOTH a la distancia ms corta posible entre s. Las microondas que emite un dispositivo BLUETOOTH pueden afectar el funcionamiento de dispositivos mdicos electrnicos. Apague esta unidad y los dems dispositivos BLUETOOTH en los lugares siguientes ya que podran provocar un accidente. Lugares con presencia de gas inflamable, hospitales, trenes, aviones o gasolineras Lugares cerca de puertas automticas o alarmas de incendios Esta unidad admite recursos de seguridad que cumplen con el estndar BLUETOOTH para proporcionar una conexin segura al utilizar la tecnologa inalmbrica BLUETOOTH, pero es posible que la seguridad sea insuficiente segn el ajuste. Tenga cuidado al realizar una comunicacin con la tecnologa inalmbrica BLUETOOTH. MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Derech a ML.book Page 25 Friday, March 14, 2014 9:35 AM No se aceptan responsabilidades por la prdida de informacin que pudiera producirse durante una comunicacin BLUETOOTH. Mantenimiento No se garantiza la comunicacin con todos los dispositivos BLUETOOTH. Un dispositivo que disponga de la funcin BLUETOOTH debe cumplir el estndar BLUETOOTH especificado por BLUETOOTH SIG y estar autenticado. Incluso en el caso de que el dispositivo conectado cumpla el estndar BLUETOOTH mencionado anteriormente, es posible que algunos dispositivos no puedan conectarse o funcionar correctamente, segn las caractersticas o las especificaciones del dispositivo. Mientras est hablando con el manos libres del telfono, puede producirse ruido, segn el dispositivo o el entorno de comunicacin. En funcin del dispositivo que vaya a conectarse, es posible que transcurra cierto tiempo antes de que se inicie la comunicacin. Otros Es posible que el dispositivo BLUETOOTH no funcione en telfonos celulares segn las condiciones de las ondas de radio y la ubicacin en la que se utilice el equipo. Si no se siente cmodo despus de utilizar el dispositivo BLUETOOTH, deje de utilizarlo inmediatamente. Si el problema persiste, consulte con el distribuidor Sony ms cercano. Si desea realizar alguna consulta o solucionar algn problema relativo a la unidad que no se trate en este manual, pngase en contacto con el distribuidor Sony ms cercano. Sustitucin de la pila de litio del control remoto El alcance del control remoto disminuye a medida que se agota la pila. Sustityala por una pila de litio CR2025 nueva. El uso de cualquier otra pila podra provocar un incendio o una explosin. Lado + hacia arriba Notas sobre la pila de litio Mantenga la pila de litio fuera del alcance de los nios. Si se ingiriese, pngase en contacto inmediatamente con un mdico. Limpie la pila con un pao seco para garantizar un contacto ptimo. Asegrese de respetar la polaridad al instalarla. No sujete la pila con pinzas metlicas, ya que podra producirse un cortocircuito. Limpieza de los conectores Es posible que la unidad no funcione correctamente si los conectores entre sta y el panel frontal estn sucios. Para evitar esta situacin, extraiga el panel frontal (pgina 7) y limpie los conectores con un hisopo de algodn. Realice esta accin con suavidad. De lo contrario, los conectores podran resultar daados. Notas Por razones de seguridad, apague el motor antes de limpiar los conectores y extraiga la llave del interruptor de la llave de encendido. No toque nunca los conectores directamente con los dedos ni con ningn dispositivo metlico. 25ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Izquier da ML.book Page 26 Friday, March 14, 2014 9:35 AM Especificaciones Seccin del sintonizador FM Rango de sintonizacin: 87,5 107,9 MHz Terminal de antena:
Conector de antena externa Frecuencia intermedia: 25 kHz Sensibilidad til: 8 dBf Selectividad: de 75 dB a 400 kHz Relacin seal-ruido (estreo):
79 dB (Emisin convencional) 80 dB (Emisin HD Radio) Separacin a 1 kHz:
50 dB (Emisin convencional) 80 dB (Emisin HD Radio) Respuesta de frecuencia:
20 a 15.000 Hz (Emisin convencional) 20 a 20.000 Hz (Emisin HD Radio) AM Rango de sintonizacin: 530 1 710 kHz Terminal de antena:
Conector de antena externa Frecuencia intermedia:
9 115 kHz o 9 125 kHz/5 kHz Sensibilidad: 26 V Seccin del reproductor de CD Relacin seal-ruido: 120 dB Respuesta de frecuencia: 10 20 000 Hz Fluctuacin y trmolo: inferior al lmite medible Cdec correspondiente: MP3 (.mp3) y WMA (.wma) Seccin del reproductor USB Interfaz: USB (alta velocidad) Corriente mxima:
MEX-N6000BH: 1 A MEX-GS810BH: 1 A (frontal), 2,1 A (posterior) Cantidad mxima de pistas reconocibles: 10 000 Codec correspondiente:
MP3 (.mp3), WMA (.wma) y WAV (.wav) Comunicacin inalmbrica Sistema de comunicacin:
BLUETOOTH estndar versin 3.0 Salida:
BLUETOOTH estndar potencia clase 2
(Mx. +4 dBm) Rango mximo de comunicacin:
Lnea de visin aprox. 10 m *1 Banda de frecuencias:
banda 2,4 GHz (2,4000 2,4835 GHz ) Mtodo de modulacin: FHSS Perfiles compatibles BLUETOOTH*2:
A2DP (Perfil de distribucin de audio avanzado) 1.3 26ES AVRCP (Perfil de control remoto de audio y video) 1.5 HFP (Perfil manos libres) 1.6 PBAP (Perfil de acceso a la agenda telefnica) SPP (Perfil de puerto serie) MAP (Perfil de acceso a mensajes) HID (Perfil de dispositivo de interfaz humana )
*1 El alcance real variar segn factores, como los obstculos entre los dispositivos, los campos magnticos alrededor de un horno de microondas, la electricidad esttica, la sensibilidad de recepcin, el funcionamiento de la antena, el sistema operativo, la aplicacin del software, etc.
*2 Los perfiles estndar BLUETOOTH indican el propsito de la comunicacin BLUETOOTH entre dispositivos. Seccin del amplificador de potencia Salida: salidas de altavoz Impedancia de altavoz: 4 8 ohmios Salida de potencia mxima: 55 W 4 (a 4 ohmios) Generales Salidas:
Terminal de salidas de audio (frontal, posterior, sub) Antena de alimentacin/Terminal de control del amplificador de potencia (REM OUT) Entradas:
Termina de entrada SiriusXM Terminal de entrada del control remoto Terminal de entrada de la antena Terminal de entrada MIC Toma de entrada AUX (minitoma estreo) Puerto USB:
MEX-N6000BH: frontal MEX-GS810BH: frontal, posterior Requisitos de alimentacin: batera de automvil de CC 12 V (masa negativa) (masa negativa
[tierra]) Dimensiones:
Aprox. 178 mm 50 mm 177 mm (an/al/prf) Dimensiones de montaje:
Aprox. 182 mm 53 mm 160 mm
(7 1/4 in 2 1/8 in 6 5/16 in) (an/al/prf) Masa: Aprox. 1,2 kg Contenidos del paquete:
Unidad principal (1) Control remoto (1): RM-X231 Micrfono (1) Componentes de instalacin y conexiones
(1 juego) Accesorios/equipo opcional:
Sintonizador para vehculo SiriusXM Connect:
SXV100 Es posible que su distribuidor no comercialice algunos de los accesorios que figuran en la lista anterior. Solicite informacin detallada. El diseo y las especificaciones estn sujetos a cambios sin previo aviso. MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Derech a ML.book Page 27 Friday, March 14, 2014 9:35 AM Derechos de autor y en pases de todo el mundo. Se utiliza bajo licencia de Research In Motion Limited. Sintonizador para vehculo SiriusXM Connect y las suscripciones se venden por separado. www.siriusxm.com Sirius, XM y todas las marcas y logotipos relacionados son marcas comerciales de Sirius XM Radio Inc. Todos los derechos reservados. Tecnologa HD Radio fabricada bajo la licencia de iBiquity Digital Corporation. Patentes de E.E.U.U y Extranjeras. HD Radio y los logos HD, HD Radio y con el Arco son marcas propias de iBiquity Digital Corp. La marca de la palabra y logotipos Bluetooth son marcas comerciales registradas y son propiedad de Bluetooth SIG, Inc., y Sony Corporation posee licencia para utilizar cualquiera de dichas marcas. Otras marcas registradas y nombres comerciales pertenecen a sus respectivos propietarios. La marca N es una marca comercial o marca registrada de NFC Forum, Inc. en los Estados Unidos y en otro pases. Windows Media es una marca comercial registrada o una marca comercial de Microsoft Corporation en los EE. UU. y otros pases. Este producto est protegido por los derechos de propiedad intelectual de Microsoft Corporation. Queda prohibido el uso o la distribucin de esta tecnologa fuera de este producto si no se dispone de una licencia de Microsoft o una divisin autorizada de Microsoft. iPhone, iPod, iPod classic, iPod nano, y iPod touch son marcas comerciales de Apple Inc., registradas en los Estados Unidos y otros pases. App Store es una marca de servicio de Apple Inc. Tecnologa de codificacin de audio MPEG Layer-3 y patentes bajo licencia de Fraunhofer IIS y Thomson. Pandora, el logotipo de Pandora y la imagen de la marca Pandora son marcas comerciales o marcas comerciales registradas de Pandora Media, Inc., utilizadas con autorizacin. Google, Google Play y Android son marcas comerciales de Google Inc. BlackBerry es propiedad de Research In Motion Limited y est registrada y/o se utiliza en los EE.UU. Solucin de problemas La siguiente lista de comprobacin le ayudar a solucionar los problemas que puedan producirse con la unidad. Antes de consultarla, revise los procedimientos de conexin y de funcionamiento. Para obtener ms detalles acerca de cmo utilizar el fusible y cmo retirar la unidad del tablero, consulte el manual de instalacin y de conexiones suministrado con esta unidad. Si el problema no se resuelve, visite el sitio web de soporte tcnico que figura en la cubierta posterior. Generales La unidad no recibe alimentacin. Si la unidad est apagada y la pantalla desaparece, no se puede operar con el control remoto. Encienda la unidad. No se emite el sonido. La posicin del control de equilibrio [FADER] no est ajustada para un sistema de 2 altavoces. No se escuchan pitidos. Se encuentra conectado un amplificador de potencia opcional y no est usando el amplificador integrado. El contenido de la memoria se borr. Se desconect la batera o el cable de fuente de alimentacin, o no estn conectados correctamente. Las emisoras almacenadas y la hora correcta se borraron. El fusible se fundi. Se escucha un ruido cuando se cambia la posicin de la llave de encendido. Los cables no se conectaron de forma correcta al conector de alimentacin auxiliar del automvil. Durante la reproduccin o la recepcin, el modo demostracin se inicia. Si no se realiza ninguna operacin durante 5 minutos y la opcin [DEMO-ON] est ajustada, se iniciar el modo de demostracin. Ajuste [DEMO-OFF] (pgina 22). Las indicaciones desaparecen del visualizador o no aparecen en l. El atenuador est ajustado en [DIM-ON]
(pgina 22). 27ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Izquier da ML.book Page 28 Friday, March 14, 2014 9:35 AM La pantalla se apaga si mantiene presionado OFF. Presione OFF en la unidad hasta que se ilumine la pantalla. Los conectores estn sucios (pgina 25). Los botones de operacin no funcionan. El disco no se expulsa. Presione TAG/CAT y
(volver)/MODE durante ms de 2 segundos para la restauracin de la unidad. Los contenidos almacenados en la memoria son eliminados. Por su seguridad, no realice la restauracin de la unidad mientras maneja. Recepcin de radio No es posible recibir emisoras. Hay ruidos que obstaculizan el sonido. La conexin no es correcta. Si su automvil cuenta con una antena de radio incluida en el vidrio lateral o posterior, conecte un cable REM OUT (con rayas azules y blancas) o un cable de fuente de alimentacin accesorio
(rojo) al cable de fuente de alimentacin del amplificador de seal de la antena del automvil. Compruebe la conexin de la antena del automvil. Si la antena del automvil no se extiende, compruebe la conexin del cable de control de la antena motorizada. No es posible utilizar la sintonizacin programada. La seal de emisin es demasiado dbil. Reproduccin de CD No se inicia la reproduccin. Disco defectuoso o sucio. Los discos CD-R/CD-RW no son para audio
(pgina 23). No es posible reproducir archivos MP3/WMA. El disco no es compatible con el formato y la versin de MP3/WMA. Para obtener ms informacin acerca de los discos y formatos que se pueden reproducir, visite el sitio web de soporte tcnico en lnea. Los archivos MP3/WMA tardan ms tiempo en reproducirse que los dems. El inicio de la reproduccin de los siguientes discos tarda algo ms de tiempo. Disco grabado con una estructura de rbol complicada. Disco grabado en Multi Session. Disco al que es posible aadir datos. 28ES Se producen saltos de sonido. Disco defectuoso o sucio. Reproduccin USB No es posible reproducir elementos a travs de un concentrador USB. Esta unidad no puede reconocer dispositivos USB a travs de un concentrador USB. El dispositivo USB tarda en reproducirse. El dispositivo USB contiene archivos con una estructura de rbol compleja. El sonido es discontinuo. Es posible que la discontinuidad del sonido se deba a una tasa alta de bits de ms de 320 kbps. La conexin Pandora no es posible. Cierre la aplicacin Pandora en el dispositivo mvil y ejectela otra vez. El nombre de la aplicacin no coincide con la aplicacin real en App Remote. Inicie la aplicacin nuevamente desde la aplicacin App Remote. Funcin NFC La conexin One touch (NFC) no es posible. Si el smartphone no responde al tacto. Revise que la funcin NFC del smartphone est encendida. Mueva la parte de la marca N del smartphone de modo de acercarla a la parte de la marca N de esta unidad. Si el smartphone se encuentra dentro de un estuche, qutelo. La sensibilidad de recepcin NFC depende del dispositivo. Si la conexin One touch con el smartphone falla varias veces, haga la conexin a BLUETOOTH en forma manual. Funcin BLUETOOTH El dispositivo de conexin no puede detectar esta unidad. Antes de realizar el emparejamiento, configure esta unidad en el modo de espera del emparejamiento. Mientras se conecta al otro dispositivo BLUETOOTH, esta unidad no puede detectarse desde otro dispositivo. Desconecte la conexin actual y busque esta unidad desde otro dispositivo. Una vez realizado el emparejamiento del dispositivo, active la salida de seal de BLUETOOTH (pgina 8). MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Derech a ML.book Page 29 Friday, March 14, 2014 9:35 AM No es posible realizar la conexin. La conexin se controla de un solo lado (esta unidad o dispositivo BLUETOOTH) pero no de ambos lados. Conecte esta unidad a un dispositivo BLUETOOTH o viceversa. El volumen del dispositivo de audio conectado es bajo (alto). El nivel de volumen cambiar dependiendo del dispositivo de audio. Ajuste el volumen del dispositivo de audio conectado o de esta unidad. No aparece el nombre del dispositivo detectado. Segn el estado del otro dispositivo, es posible que no se pueda obtener el nombre. No se emite ningn tono de llamada. Ajuste el volumen girando el selector de control mientras recibe una llamada. El sonido salta durante la reproduccin de un dispositivo de audio BLUETOOTH. Reduzca la distancia entre la unidad y el dispositivo de audio BLUETOOTH. Si el dispositivo de audio BLUETOOTH est guardado en un estuche que interrumpe la seal, retrelo mientras lo utilice. Segn el dispositivo de conexin, es posible que el tono de llamada no se emita correctamente. Ajuste [RINGTONE] en [1] (pgina 22). Los altavoces frontales no estn conectados a la unidad. Conecte los altavoces frontales a la unidad. El tono de llamada suena solamente desde los altavoces frontales. No se puede ajustar el volumen de la voz de la persona que habla. Los altavoces frontales no estn conectados a la unidad. Conecte los altavoces frontales a la unidad. La voz del que habla y la voz del auricular solamente salen de los altavoces frontales. El interlocutor de una llamada le notifica que el volumen es demasiado bajo o demasiado alto. Ajuste el volumen segn corresponda mediante la ganancia de micrfono (pgina 17). Se producen ecos o ruidos durante las conversaciones telefnicas. Baje el volumen. Ajuste el modo EC/NC en [EC/NC-1] o [EC/NC-2]
(pgina 17). Si el sonido ambiente que no sea el sonido de la llamada de telfono es alto, intente reducir el ruido. Por ej.: si una ventana est abierta y se oye ruido de la calle, etc., fuerte, cierre la ventana. Si el aire acondicionado est alto, bjelo. El telfono no est conectado. Durante la reproduccin de audio BLUETOOTH, el telfono no est conectado aunque presione CALL. Realice la conexin desde el telfono. La calidad de sonido del telfono es baja. La calidad del sonido del telfono depende de las condiciones de recepcin del telfono celular. Mueva el automvil a un lugar en el que pueda mejorar la seal del telfono celular si la recepcin es de mala calidad. En los alrededores se estn utilizando varios dispositivos BLUETOOTH u otros dispositivos que emiten ondas de radio. Apague los otros dispositivos. Aumente la distancia entre la unidad y los otros dispositivos. El sonido de reproduccin se detiene momentneamente mientras se establece la conexin entre esta unidad y el telfono celular. No se trata de una falla de funcionamiento. No es posible controlar el dispositivo de audio BLUETOOTH conectado. Compruebe que el dispositivo de audio BLUETOOTH conectado sea compatible con AVRCP. Algunas funciones no estn disponibles. Compruebe que el dispositivo de conexin sea compatible con las funciones en cuestin. Se contesta una llamada accidentalmente. El telfono conectado est configurado para responder una llamada automticamente. El emparejamiento ha fallado porque se ha superado el tiempo establecido. Segn el dispositivo de conexin, es posible que el tiempo para el emparejamiento sea escaso. Intente completar el emparejamiento en el tiempo establecido. No es posible utilizar la funcin BLUETOOTH. Apague la unidad presionando OFF durante ms de 2 segundos, luego vuelva a encender la unidad. Durante la llamada con manos libres, los altavoces del automvil no emiten ningn sonido. Si el sonido de salida viene del telfono celular, ajuste el telfono para que el sonido se emita por los altavoces del automvil. La conexin Pandora no es posible. Cierre la aplicacin Pandora en el dispositivo mvil y ejectela otra vez. 29ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Izquier da ML.book Page 30 Friday, March 14, 2014 9:35 AM El nombre de la aplicacin no coincide con la aplicacin real en App Remote. Inicie la aplicacin nuevamente desde la aplicacin App Remote. Cuando ejecute la aplicacin App Remote mediante BLUETOOTH, la pantalla cambia automticamente a [BT AUDIO]. La aplicacin App Remote o la funcin BLUETOOTH han fallado. Ejecute la aplicacin nuevamente. Mensajes/indicaciones de error ERROR El disco est sucio o se insert al revs. Lmpielo o insrtelo de forma correcta. Se insert un disco vaco. No es posible reproducir el disco debido a un problema. Inserte otro disco. El dispositivo USB no ha sido reconocido automticamente. Conctelo nuevamente. Presione para extraer el disco. HUB NO SUPRT (No admite concentradores) El concentrador USB no es compatible con esta unidad. IPD STOP (iPod se detiene) Cuando no se selecciona la reproduccin repetida, la reproduccin termina con la ltima pista del lbum. Se finaliza la aplicacin de msica del iPod/
iPhone. Presione PAUSE para volver a comenzar la reproduccin. NO DEV (No hay dispositivo)
[USB] se selecciona como fuente sin que est conectado un dispositivo USB. Se ha desconectado un dispositivo USB o un cable USB durante la reproduccin. Asegrese de conectar un dispositivo USB y un cable USB. NO MUSIC El disco o dispositivo USB no contiene ningn archivo de msica. Inserte un CD de msica. Conecte un dispositivo USB que contenga algn archivo de msica. OVERLOAD El dispositivo USB est sobrecargado. Desconecte el dispositivo USB y, a continuacin, presione SRC para cambiar la fuente. El dispositivo USB tiene una falla, o se ha conectado un dispositivo incompatible. 30ES PUSH EJT (Presione expulsar) No es posible expulsar el disco. Presione (expulsar). READ La unidad est leyendo toda la informacin de pistas y de lbumes del disco. Espere hasta que finalice la lectura y se inicie la reproduccin automticamente. Es posible que demore ms de un minuto en funcin de la estructura del disco. USB NO SUPRT (USB no es compatible) El dispositivo USB conectado no es compatible. Para obtener ms informacin acerca de la compatibilidad del dispositivo USB, visite el sitio web de soporte tcnico.
Durante la operacin de avance o retroceso
] o [
rpido, lleg al principio o al final del disco, por lo que no es posible continuar.
No se puede mostrar el carcter. Acerca de la funcin BLUETOOTH:
BT BUSY (BLUETOOTH no disponible) La agenda telefnica y el historial de llamadas del telfono celular no son accesibles mediante esta unidad. Espere un momento e intntelo nuevamente. ERROR Fall BT Initialize. Fall el acceso a la agenda telefnica. El contenido de la agenda telefnica ha sido modificado durante el acceso al telfono celular. Acceda a la agenda telefnica nuevamente. MEM FAILURE (Error de memoria) La unidad no pudo almacenar el contacto en la marcacin predefinida. Asegrese de que el nmero que desea almacenar sea correcto (pgina 17). MEMORY BUSY Esta unidad est almacenando datos. Espere a que termine el almacenamiento. NO DEV (No hay dispositivo) La fuente de audio BLUETOOTH se selecciona sin que est conectado un dispositivo BLUETOOTH. El dispositivo de audio BLUETOOTH se ha desconectado durante una llamada. Asegrese de conectar un dispositivo de audio BLUETOOTH. MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Derech a ML.book Page 31 Friday, March 14, 2014 9:35 AM La fuente del telfono BLUETOOTH se selecciona sin un telfono celular conectado. El telfono celular se ha desconectado durante una llamada. Asegrese de conectar un telfono celular. P EMPTY (nmero predefinido) La marcacin predefinida est vaca. UNKNOWN El nombre o el nmero de telfono no se pueden visualizar al explorar una agenda telefnica o un historial de llamadas. WITHHELD La persona que llama oculta el nmero de telfono. Para el funcionamiento de App Remote:
APP -------- (Aplicacin) No se logr la conexin con la aplicacin. Establezca la conexin de iPhone nuevamente. APP DISCNCT (aplicacin desconectada) No se realiza la conexin App Remote. Establezca la conexin App Remote
(pgina 18). APP MENU (Men de aplicaciones) La operacin de los botones no puede realizarse mientras haya algn men abierto en el iPhone/
telfono Android. Salga del men en el iPhone/telfono Android. APP NO DEV (Aplicacin sin dispositivo) El dispositivo con la aplicacin instalada no est conectado. Conecte el dispositivo y luego establezca la conexin del iPhone. APP SOUND (Sonido de la aplicacin) La operacin de los botones no puede realizarse mientras haya algn men de sonidos abierto en el iPhone/telfono Android. Salga del men de sonidos en el iPhone/
telfono Android. OPEN APP (Abrir aplicacin) La aplicacin App Remote no est funcionando. Inicie la aplicacin del iPhone. Para la operacin de HD Radio:
IPOD FULL No hay espacio en la memoria del iPod durante la transferencia de la informacin de la cancin. LINKING Se interrumpi la recepcin del programa complementario. NO INFO (sin informacin) Cuando esta unidad reciba emisin analgica, no se mostrar el ttulo de la cancin/nombre del artista/nombre del lbum. Algunas estaciones de radio no proporcionan esta informacin. Para la operacin iTunes Tagging:
PREV STORED (previa almacenada) Se presion TAG con la misma informacin de la cancin ya guardada. STORE FAIL (error de almacenamiento) Se intent recuperar la informacin de la cancin otra vez cuando ya se estaba recuperando. TAG STORING Se presion TAG al recuperar informacin de la cancin. TAG FAILURE Error al transferir informacin de la cancin. Se seleccion [TAG DEL] al guardar otra informacin de la cancin. Intente otra vez. TAG MEM FULL (Memoria TAG completa) Se presion TAG con 50 canciones etiquetadas ya guardadas. TAG NO SUPRT (TAG no compatible) Se conect un iPod a la unidad con informacin de la cancin guardada no compatible con Etiquetado de iTunes. Para el funcionamiento de Pandora:
CANNOT SKIP No se permite saltear pistas en Pandora. Espere hasta que el comercial finalice. Pandora limita el nmero de saltos permitidos en el servicio. Espere hasta que comience la siguiente pista, o seleccione otra estacin en la lista. ERROR La devolucin pulgares fall. Vuelva a intentar ingresar pulgares abajo. Marcar como favorito fall. Intent volver a marcar como favorito. NO STATION No hay estacin en su cuenta Pandora. Cree la estacin en su dispositivo mvil. 31ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Izquier da ML.book Page 32 Friday, March 14, 2014 9:35 AM NOT ALLOWED No se permite la devolucin pulgares. Espere hasta que el comercial finalice. Algunas funciones, como la Estacin compartida, no permiten devoluciones. Espere hasta que comience la siguiente pista, o seleccione otra estacin en la lista. No se permite marcar como favorito. Espere hasta que el comercial finalice. Seleccione otra pista o estacin y, a continuacin, intntelo nuevamente. OPEN APP (abrir aplicacin) Al conectar por medio del puerto USB. Pandora no se ejecuta. Ejecute la aplicacin Pandora en el iPhone. OPEN APP (abrir aplicacin), PRESIONE PAUSE Cuando conecte por medio de la funcin BLUETOOTH. Pandora no se ejecuta. Ejecute la aplicacin Pandora en el dispositivo mvil, luego presione PAUSE. PAN MAINT (mantenimiento de Pandora) El servidor de Pandora est en mantenimiento. Espere un momento e intntelo nuevamente. PAN NO SUPRT (Pandora no es compatible) El dispositivo conectado no es soportado. Para ms detalles de los dispositivos compatibles, visite el sitio de soporte. PAN RESTRICT (restriccin de licencia Pandora) Pandora no se encuentra disponible fuera de su pas. PLEASE LOGIN, PANDORA APP (aplicacin Pandora) No ingresado en su cuenta Pandora. Desconecte el servicio e ingrese a su cuenta Pandora, luego desconecte nuevamente el dispositivo. UPDATE PAN (actualizar Pandora application) Est conectada una versin antigua de Pandora. Actualice la aplicacin de Pandora a la ltima versin. NO NETWORK La conexin de red es inestable o se pierde. Vuelva a establecer la conexin de red en su dispositivo. Espere hasta que se establezca la conexin de red. 32ES Para el funcionamiento de SiriusXM:
CH LOCKED (canal bloqueado) El canal que ha solicitado est bloqueado por la funcin Control parental de la radio. Consulte Para establecer un control parental
(pgina 12) para obtener ms informacin sobre la funcin de Control parental y cmo acceder a los canales bloqueados. CH UNAVAIL (canal no disponible) El canal que ha solicitado no es un canal SiriusXM vlido o el canal que estaba escuchando ya no est disponible. Tambin es posible que vea este mensaje por un momento cuando conecte por primera vez un Sintonizador para vehculo SiriusXM Connect nuevo. Visite www.siriusxm.com para obtener ms informacin sobre el programa de canales SiriusXM. CHAN UNSUB (no suscrito a canal) El canal que ha solicitado no est incluido en su paquete de suscripcin de SiriusXM o el canal que estaba escuchando ya no est incluido en su paquete de suscripcin de SiriusXM. Visite www.siriusxm.com o llame al 866-635-
2349 si tiene alguna pregunta sobre su paquete de suscripcin o si le gustara suscribirse a este canal. CHK ANT (revisar antena) La radio ha detectado una falla con la antena de SiriusXM. Es posible que el cable de la antena est desconectado o daado. Verifique que el cable de la antena est conectado al Sintonizador para vehculo SiriusXM Connect. Inspeccione el cable de la antena en busca de daos o pliegues. Reemplace la antena si el cable est daado. Los productos SiriusXM estn disponibles en su tienda al por menor local de audio para autos o en lnea en -
www.shop.siriusxm.com CHECK TUNER La radio tiene problemas para comunicarse con el Sintonizador para vehculo SiriusXM Connect. Es posible que el sintonizador est desconectado o daado. Verifique que el cable del Sintonizador para vehculo SiriusXM Connect est conectado de forma segura a la radio. MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\02ES-MEXN6000BHU\040CD.fm masterpage: Derech a ML.book Page 33 Friday, March 14, 2014 9:35 AM MEM FAILURE (Error de memoria) La unidad no pudo almacenar el canal en la marcacin predefinida. Asegrese de que el canal que intenta almacenar es correcto. NO SIGNAL El Sintonizador para vehculo SiriusXM Connect tiene problemas para recibir la seal del satlite SiriusXM. Verifique que su vehculo se encuentra al aire libre con una vista clara al cielo. Verifique que la antena de montaje magntico SiriusXM est montada sobre una superficie de metal en la parte exterior del vehculo. Aleje la antena SiriusXM de cualquier obstruccin. Inspeccione el cable de la antena en busca de daos o pliegues. Consulte el manual de instalacin del Sintonizador para vehculo SiriusXM Connect para obtener ms informacin sobre la instalacin de la antena. Reemplace la antena si el cable est daado. Los productos SiriusXM estn disponibles en su tienda al por menor local de audio para autos o en lnea en -
www.shop.siriusxm.com SUBSCRIPTION UPDATE - ENTER TO CONTINUE La radio ha detectado un cambio en su estado de suscripcin de SiriusXM. Presione ENTER para borrar el mensaje. Visite www.siriusxm.com o llame al 866-635-
2349, si tiene preguntas sobre su suscripcin. Si estas soluciones no ayudan a solucionar el problema, pngase en contacto con el distribuidor Sony ms cercano. Si entrega la unidad para su reparacin a causa de problemas en la reproduccin de CD, lleve el disco que se utiliz cuando se produjo el problema. 33ES MEX-N6000BH/MEX-GS810BH 4-489-692-11(1) M:\003\Win 7 ML\4489692111_MEX-N6000BH_GB-LaES(10.0 600dpi)\4489692111_MEX-
N6000BH_GB-LaES\01GB-MEXN6000BHU\050BCO.fm masterpage: BCO ML.book Page 32 Friday, March 14, 2014 9:35 AM http://esupport.sony.com If you have any questions/problems regarding this product, try the following:
Operating Instructions. 1 Read Troubleshooting in these 2 Please contact (U.S.A. only);
Call 1-800-222-7669 URL http://www.SONY.com http://www.sony.net/
2014 Sony Corporation Printed in Thailand MEX-N6000BH/MEX-GS810BH 4-489-692-11(1)
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-05-25 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2014-05-25
|
||||
1 | Applicant's complete, legal business name |
Sony Corporation
|
||||
1 | FCC Registration Number (FRN) |
0003739166
|
||||
1 | Physical Address |
1-7-1 Konan
|
||||
1 |
Tokyo, N/A 108-0075
|
|||||
1 |
Japan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
e******@ul.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
AK8
|
||||
1 | Equipment Product Code |
MEXN6000BH
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
R****** T****
|
||||
1 | Title |
Senior Manager
|
||||
1 | Telephone Number |
81-50********
|
||||
1 | Fax Number |
81-50********
|
||||
1 |
c******@jp.sony.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
UL Japan, Inc.
|
||||
1 | Name |
T******** I******
|
||||
1 | Physical Address |
1-22-3 Megumigaoka, Hiratsuka-shi
|
||||
1 |
Kanagawa-ken, 259-1220
|
|||||
1 |
Japan
|
|||||
1 | Telephone Number |
81-46********
|
||||
1 | Fax Number |
81-46********
|
||||
1 |
T******@ul.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/24/2014 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Bluetooth Audio System | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is Conducted. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
UL Japan, Inc. Shonan EMC EMC Lab.
|
||||
1 | Name |
T******** H********
|
||||
1 | Telephone Number |
+81-5********
|
||||
1 | Fax Number |
+81 5********
|
||||
1 |
T******@jp.ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0010000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC