all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Short Term Confidentiality Users Manual | Users Manual | 3.54 MiB | July 09 2012 / June 03 2013 | |||
1 | Cover Letter(s) | July 09 2012 | ||||||
1 | Cover Letter(s) | July 09 2012 | ||||||
1 | RF Exposure Info | July 09 2012 | ||||||
1 | Cover Letter(s) | July 09 2012 | ||||||
1 | Cover Letter(s) | July 09 2012 | ||||||
1 | Test Report | July 09 2012 | ||||||
1 | ID Label/Location Info | July 09 2012 | ||||||
1 | ID Label/Location Info | July 09 2012 | ||||||
1 | External Photos | July 09 2012 / June 03 2013 | ||||||
1 | Test Setup Photos | July 09 2012 / June 03 2013 | ||||||
1 | Internal Photos | July 09 2012 / June 03 2013 |
1 | Short Term Confidentiality Users Manual | Users Manual | 3.54 MiB | July 09 2012 / June 03 2013 |
E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504122_GB\4445504122
\4445504122DWZM50UC\01GB01COV.fm 00DWZ.book Page 1 Friday, August 31, 2012 11:50 AM masterpage:Right 4-445-504-12 (2) Digital Wireless Package The supplied CD-ROM includes the Operating Instructions (English, French, German, Italian, and Spanish versions) in PDF format. For more details, see Using the CD-ROM manual on page 19. Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. DWZ-M50 DWZ-B30GB 2012 Sony Corporation DWZ-M50/B30GB 4-445-504-12 (2) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB02REG.fm 00DWZ.book Page 2 Wednesday, August 15, 2012 3:38 PM masterpage:Left For the ZTX-M01/B01 Transmitters Owners Record The model and serial numbers are located at the rear or on the bottom of the unit. Record the model and serial numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. _____________________ Serial No. ______________________ WARNING Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. If the transmitter develops an abnormally high temperature, a burning odor or smoke during use, remove the battery holder and stop using the transmitter immediately. Take care not to burn your fingers when removing the battery holder as the batteries may be very hot at this time. AVERTISSEMENT Nexposez pas les batteries une chaleur excessive, au soleil ou prs dun feu par exemple. Si lmetteur dgage une temprature anormalement leve, une odeur de brl ou de la fume pendant son utilisation, enlevez le support de piles et arrtez toute utilisation immdiatement. Attention ne pas vous brler les doigts lorsque vous retirez le support de piles car cellesci peuvent tre brlantes. WARNUNG Akkus drfen keinesfalls bermiger Wrmeeinwirkung ausgesetzt werden, wie z.B. Sonneneinstrahlung, Feuer o. Wenn der Sender eine abnorm hohe Temperatur, einen Geruch nach Verbranntem oder Rauch entwickelt, 2 entnehmen Sie den Batterie-Halter und stoppen Sie sofort den Betrieb des Senders. Achten Sie bei der Entnahme des Batterie-
Halters darauf, sich nicht die Finger zu verbrennen, denn die Batterien knnten sehr hei zu diesem Zeitpunkt sein. For the customers in the U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. All interface cables used to connect peripherals must be shielded in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. If you have any questions about this product, you may call ;
DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504122_GB\4445504122
\4445504122DWZM50UC\01GB02REG.fm 00DWZ.book Page 3 Friday, August 31, 2012 11:49 AM masterpage:Right Sony Customer Information Service Center 1-800-222-7669 or http://www.sony.com/
Declaration of Conformity Trade Name : SONY Model : ZTX-M01/B01 Responsible party : Sony Electronics Inc. Address : 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone Number : 858-942-2230 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void users authority to operate this device. This device complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This device has very low levels of RF energy that it is deemed to comply without testing of specific absorption ratio (SAR). This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. For the customers in Canada This Class B digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term IC: before the radio certification number only signifies that Industry Canada technical specifications were met. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR). Pour les clients au Canada Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. La mention IC: devant le numro de certification/homologation signifie uniquement que les spcifications techniques dIndustrie Canada sont remplies. Cet quipement est conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles dexposition aux frquences radiolectriques (RF) CNR-102 de lIC. Cet quipement met une nergie RF trs faible qui est considre conforme sans valuation du dbit dabsorption spcifique (DAS). 3 DWZ-M50/B30GB 4-445-504-12 (2) E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504122_GB\4445504122
\4445504122DWZM50UC\01GB02REG.fm 00DWZ.book Page 4 Friday, August 31, 2012 11:49 AM masterpage:Left For the customers in Europe Hereby, Sony Corporation, declares that this ZTX-M01/B01 is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/
EC. For details, please access the following URL: http://www.compliance.sony.de/
Pour les clients en Europe Par la prsente Sony Corporation dclare que lappareil ZTX-M01/B01 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Pour toute information complmentaire, veuillez consulter lURL suivante:
http://www.compliance.sony.de/
Fr Kunden in Europa Hiermit erklrt Sony Corporation, dass sich das Gert ZTX-M01/B01 in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Weitere Informationen erhltlich unter:
http://www.compliance.sony.de/
Per i clienti in Europa Con la presente Sony Corporation dichiara che questo ZTX-M01/B01 conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/
CE. Per ulteriori dettagli, si prega di consultare il seguente URL:
http://www.compliance.sony.de/
Para los clientes de Europa Por medio de la presente Sony Corporation declara que el ZTX-M01/B01 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Para mayor informacin, por favor consulte el siguiente URL:
4 http://www.compliance.sony.de/
Voor de klanten in Europa Hierbij verklaart Sony Corporation dat het toestel ZTX-M01/B01 in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/
EG. Nadere informatie kunt u vinden op:
http://www.compliance.sony.de/
Fr kunder i Europa Hrmed intygar Sony Corporation att denna ZTX-M01/B01 str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Fr ytterligare information g in p fljande hemsida: http://www.compliance.sony.de/
Para clientes na Europa Sony Corporation declara que este ZTX-M01/B01 est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Para mais informacoes, por favor consulte a seguinte URL:
http://www.compliance.sony.de/
Til europiske kunder Undertegnede Sony Corporation erklrer herved, at flgende udstyr ZTX-M01/B01 overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. For yderligere information g ind p flgende hjemmeside:
http://www.compliance.sony.de/
Asiakkaille Euroopassa Sony Corporation vakuuttaa tten ett ZTX-M01/B01 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Halutessasi listietoja, ky osoitteessa:
http://www.compliance.sony.de/
For kunder i Europa Sony Corporation erklrer herved at utstyret ZTX-M01/B01 er i samsvar med de DWZ-M50/B30GB 4-445-504-12 (2) E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504122_GB\4445504122
\4445504122DWZM50UC\01GB02REG.fm 00DWZ.book Page 5 Friday, August 31, 2012 11:49 AM masterpage:Right kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Tovbbi informcikat a kvetkez weboldalon tallhat:
http://www.compliance.sony.de/
grunnleggende krav og vrige relevante krav i direktiv 1999/5/EF. For flere detaljer, vennligst se:
http://www.compliance.sony.de/
E
Sony Corporation
ZTX-M01/B01
1999/5/.
http://www.compliance.sony.de/
Pro zkaznky v Evrop Sony Corporation tmto prohlauje, e tento ZTX-M01/B01 je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Podrobnosti lze zskat na nsledujc URL:
http://www.compliance.sony.de/
Klientidele Euroopas Sony Corporation kinnitab kesolevaga seadme ZTX-M01/B01 vastavust 1999/5/
E direktiivi phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. ksikasjalikum info:
http://www.compliance.sony.de/. Eurpai gyfeleinknek Alulrott, Sony Corporation nyilatkozom, hogy a(z) ZTX-M01/B01 megfelel a vonatkoz alapvet Dla klientw w Europie Niniejszym Sony Corporation owiadcza, e ZTX-M01/B01 jest zgodne z zasadniczymi wymaganiami oraz innymi stosownymi postanowieniami Dyrektywy 1999/5/
WE. Szczegowe informacje znale mona pod nastpujcym adresem URL:
http://www.compliance.sony.de/
Pentru clienii din Europa Prin prezenta, Sony Corporation declar c acest ZTX-M01/B01 respect cerinele eseniale i este n conformitate cu prevederile Directivei 1995/5/EC. Pentru detalii, v rugm accesai urmtoarea adres:
http://www.compliance.sony.de/
Pre zkaznkov v Eurpe Sony Corporation tmto vyhlasuje, e ZTX-M01/B01 spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. 5 DWZ-M50/B30GB 4-445-504-12 (2) E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504122_GB\4445504122
\4445504122DWZM50UC\01GB02REG.fm 00DWZ.book Page 6 Friday, August 31, 2012 11:49 AM masterpage:Left Podrobnosti zskate na nasledovnej webovej adrese:
http://www.compliance.sony.de/
Za stranke v Evropi Sony Corporation izjavlja, da je ta ZTX-M01/B01 v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES. Za podrobnosti vas naproamo, e pogledate na URL:
http://www.compliance.sony.de/
For the customers in Europe The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. Pour les clients en Europe Le fabricant de ce produit est Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japon. Le reprsentant autoris pour EMC et la scurit des produits est Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Allemagne. Pour toute question concernant le service ou la garantie, veuillez consulter les adresses indiques dans les documents de service ou de garantie spars. Fr Kunden in Europa Der Hersteller dieses Produkts ist Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan. Der autorisierte Reprsentant fr EMV und Produktsicherheit ist Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Deutschland. Bei jeglichen Angelegenheiten in Bezug auf Kundendienst oder Garantie wenden Sie sich bitte an die in den separaten Kundendienst- oder Garantiedokumenten aufgefhrten Anschriften. 6 Per i clienti in Europa Il fabbricante di questo prodotto la Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Giappone. La rappresentanza autorizzata per EMC e la sicurezza dei prodotti la Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stoccarda, Germania. Per qualsiasi questione riguardante lassistenza o la garanzia, si prega di rivolgersi agli indirizzi riportati nei documenti sullassistenza o sulla garanzia a parte. Para los clientes de Europa El fabricante de este producto es Sony Corporation, con direccin en 1-7-1 Konan, Minato-ku, Tokio, 108-0075 Japn. El Representante autorizado para EMC y seguridad del producto es Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Alemania. Para asuntos relacionados con el servicio y la garanta, consulte las direcciones entregadas por separado para los documentos de servicio o garanta. Voor klanten in Europa De fabrikant van dit product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan. De geautoriseerde vertegenwoordiger voor EMC en productveiligheid is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Duitsland. Raadpleeg de adressen in de afzonderlijke service- of garantiedocumenten voor alle kwesties met betrekking tot service en garantie. Fr kunder i Europa Tillverkaren av denna produkt r Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan. Auktoriserad representant fr EMC och produktskerhet r Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Tyskland. Fr renden gllande service eller garanti, se de adresser som angivits i separata service- eller garantidokument. DWZ-M50/B30GB 4-445-504-12 (2) E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504122_GB\4445504122
\4445504122DWZM50UC\01GB02REG.fm 00DWZ.book Page 7 Friday, August 31, 2012 11:49 AM masterpage:Right
Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan.
EMC Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
. Sony Corporation, 1-7-1 Konan, Minatoku, , 108-0075 . Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 , .
. Pentru clienii din Europa Productorul acestui produs este Sony Corporation, 1-7-1 Konan, Minato-ku, Tokio, 108-0075 Japonia. Reprezentantul autorizat pentru EMC i sigurana produsului este Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germania. Pentru orice probleme legate de service sau garanie, v rugm s consultai adresele afiate n documentele separate pentru service sau garanie. Para clientes na Europa O fabricante deste produto a Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japo. O Representante Autorizado para o EMC e segurana de produtos a Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Alemanha. Para quaisquer questes sobre servio ou a garantia, consulte os endereos nos documentos de servio ou garantia fornecidos parte. Kunder i Europa Producenten af dette produkt er Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan. Den autoriserede reprsentant for EMC og produktsikkerhed er Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Tyskland. Nr det glder service eller garantisprgsml, henvises til de adresser, som er angivet i srskilte service-
eller garantidokumenter. Asiakkaille Euroopassa Tmn tuotteen valmistaja on Sony Corporation, 1-7-1 Konan, Minato-ku, Tokio, 108-0075 Japani. Valtuutettu shkmagneettista yhteensopivuutta ja tuotteen turvallisuutta edustava taho on Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Saksa. Ottakaa yhteytt huolto- ja takuuasioissa erillisiss huolto- tai takuuasiakirjoissa annettuihin osoitteisiin. For kunder i Europa Produsenten av dette produktet er Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan. Den autoriserte representanten for EMC og produktsikkerhet er Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Tyskland. For all service eller garantisaker vennligs henvis til adressen som er oppgitt i de separate service eller garantidokumentene. 7 DWZ-M50/B30GB 4-445-504-12 (2) E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504122_GB\4445504122
\4445504122DWZM50UC\01GB02REG.fm 00DWZ.book Page 8 Friday, August 31, 2012 11:49 AM masterpage:Left Klientidele Euroopas Selle seadme tootja on Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan. EMC ja toodete ohutuse volitatud esindaja on Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. Hoolduse vi garantiiga seonduvates ksimustes vt aadresse eraldiseisvatest hooldus- vi garantiidokumentidest. Eurpai gyfeleinknek E termk gyrtja a Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, 108-
0075 Japan. EMC s termkbiztonsg tekintetben a kvetkez szervezet illetkes: Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. Szerviz s garancia gyekben forduljon a kln szervizvagy jtllsi fzetben feltntetett szervezet(ek)hez. Europos klientams io produkto gamintojas yra Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan. EMC ir produkto saugos galiotasis atstovas yra Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. Dl techninio aptarnavimo arba garantijos kreipkits adresais, nurodytais atskiruose techninio aptarnavimo ir garantijos dokumentuose. Dla klientw w Europie Producentem tego produktu jest Sony Corporation, 1-7-1 Konan, Minato-ku, Tokio, 108-0075 Japonia. Autoryzowanym przedstawicielem producenta w Europie w zakresie kompatybilnoci elektromagnetycznej i bezpieczestwa produktu jest Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Niemcy. W sprawach serwisowych i gwarancyjnych naley kontaktowa si z podmiotami, ktrych adresy podano w osobnych dokumentach gwarancyjnych lub serwisowych. 8 DWZ-M50/B30GB 4-445-504-12 (2) E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504122_GB\4445504122
\4445504122DWZM50UC\01GB02REG.fm 00DWZ.book Page 9 Friday, August 31, 2012 11:49 AM masterpage:Right Za kupce v Evropi Izdelovalec tega izdelka je druba Sony Corporation, 1-7-1 Konan, Minato-ku, Tokio, 108-0075 Japonska. Pooblaeni zastopnik za EMC in varnost izdelkov je druba Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Nemija. V zvezi s servisiranjem in uveljavljanjem garancije se obrnite na naslove, ki so navedeni v loeni servisni ali garancijski dokumentaciji. For the ZRX-HR50/C30 Receivers Owners Record The model and serial numbers are located at the rear or on the bottom of the unit. Record the model and serial numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. _____________________ Serial No. _____________________ IMPORTANT The nameplate is located on the bottom. IMPORTANT La plaque signaltique se situe sous lappareil. WICHTIG Das Namensschild befindet sich auf der Unterseite des Gertes. WARNING Excessive sound pressure from earphones and headphones can cause hearing loss. In order to use this product safely, avoid prolonged listening at excessive sound pressure levels. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. If the receiver develops an abnormally high temperature, a burning odor or smoke during use, remove the battery holder and stop using the receiver immediately. Take care not to burn your fingers when removing the battery holder as the batteries may be very hot at this time. AVERTISSEMENT Une pression acoustique excessive en provenance des couteurs ou du casque peut provoquer une baisse de lacuit auditive. Pour utiliser ce produit en toute scurit, vitez lcoute prolonge des pressions sonores excessives. Nexposez pas les batteries une chaleur excessive, au soleil ou prs dun feu par exemple. Si le rcepteur dgage une temprature anormalement leve, une odeur de brl ou de la fume pendant son utilisation, enlevez le support de piles et arrtez toute utilisation immdiatement. Attention ne pas vous brler les doigts lorsque vous retirez le support de piles car cellesci peuvent tre brlantes. WARNUNG Zu hoher Schalldruck von Ohrhrern und Kopfhrern kann Gehrschden verursachen. Um dieses Produkt sicher zu verwenden, vermeiden Sie lngeres Hren bei sehr hohen Schalldruckpegeln. 9 DWZ-M50/B30GB 4-445-504-12 (2) E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504122_GB\4445504122
\4445504122DWZM50UC\01GB02REG.fm 00DWZ.book Page 10 Friday, August 31, 2012 11:49 AM masterpage:Left Akkus drfen keinesfalls bermiger Wrmeeinwirkung ausgesetzt werden, wie z.B. Sonneneinstrahlung, Feuer o. Wenn der Empfnger eine abnorm hohe Temperatur, einen Geruch nach Verbranntem oder Rauch entwickelt, entnehmen Sie den Batterie-Halter und stoppen Sie sofort den Betrieb des Empfngers. Achten Sie bei der Entnahme des Batterie-
Halters darauf, sich nicht die Finger zu verbrennen, denn die Batterien knnten sehr hei zu diesem Zeitpunkt sein. About the supplied AC adapter A propos de ladaptateur CA fourni Informationen zum mitgelieferten Netzteil Important Safety Instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible socket-outlet near the unit. If a fault should occur during operation of the unit, operate the disconnect device to switch the power supply off, or disconnect the power plug. DWZ-M50/B30GB 4-445-504-12 (2) E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504122_GB\4445504122
\4445504122DWZM50UC\01GB02REG.fm 00DWZ.book Page 11 Friday, August 31, 2012 11:49 AM masterpage:Right AVERTISSEMENT Afin de rduire les risques dincendie ou dlectrocution, ne pas exposer cet appareil la pluie ou lhumidit. Afin dcarter tout risque dlectrocution, garder le coffret ferm. Ne confier lentretien de lappareil qu un personnel qualifi. Lors de linstallation de lappareil, incorporer un dispositif de coupure dans le cblage fixe ou brancher la fiche dalimentation dans une prise murale facilement accessible proche de lappareil. En cas de problme lors du fonctionnement de lappareil, enclencher le dispositif de coupure dalimentation ou dbrancher la fiche dalimentation. WARNUNG Um die Gefahr von Brnden oder elektrischen Schlgen zu verringern, darf dieses Gert nicht Regen oder Feuchtigkeit ausgesetzt werden. Um einen elektrischen Schlag zu vermeiden, darf das Gehuse nicht geffnet werden. berlassen Sie Wartungsarbeiten stets nur qualifiziertem Fachpersonal. Beim Einbau des Gerts ist daher im Festkabel ein leicht zugnglicher Unterbrecher einzufgen, oder der Netzstecker muss mit einer in der Nhe des Gerts befindlichen, leicht zugnglichen Wandsteckdose verbunden werden. Wenn whrend des Betriebs eine Funktionsstrung auftritt, ist der Unterbrecher zu bettigen bzw. der Netzstecker abzuziehen, damit die Stromversorgung zum Gert unterbrochen wird. CAUTION The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. ATTENTION Eviter dexposer lappareil un gouttement ou des claboussures. Ne placer aucun objet rempli de liquide, comme un vase, sur lappareil. Cet appareil nest pas dconnect de la source dalimentation secteur tant quil est raccord la prise murale, mme si lappareil lui-mme a t mis hors tension. VORSICHT Das Gert ist nicht tropf- und spritzwassergeschtzt. Es drfen keine mit Flssigkeiten gefllten Gegenstnde, z. B. Vasen, darauf abgestellt werden. Solange das Netzkabel an eine Netzsteckdose angeschlossen ist, bleibt das Gert auch im ausgeschalteten Zustand mit dem Strommetz verbunden. For the customers in the U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause 11 DWZ-M50/B30GB 4-445-504-12 (2) E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504122_GB\4445504122
\4445504122DWZM50UC\01GB02REG.fm 00DWZ.book Page 12 Friday, August 31, 2012 11:49 AM masterpage:Left harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. All interface cables used to connect peripherals must be shielded in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. If you have any questions about this product, you may call ;
Sony Customer Information Service Center 1-800-222-7669 or http://www.sony.com/
12 Declaration of Conformity Trade Name : SONY Model : ZRX-HR50/C30 Responsible party : Sony Electronics Inc. Address : 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone Number : 858-942-2230 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For the customers in Canada This Class B digital apparatus complies with Canadian ICES-003. Pour les clients au Canada Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. For the customers in Europe Hereby, Sony Corporation, declares that this ZRX-HR50/C30 is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/
EC. For details, please access the following URL: http://www.compliance.sony.de/
Pour les clients en Europe Par la prsente Sony Corporation dclare que lappareil ZRX-HR50/C30 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Pour toute information complmentaire, veuillez consulter lURL suivante:
http://www.compliance.sony.de/
DWZ-M50/B30GB 4-445-504-12 (2) E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504122_GB\4445504122
\4445504122DWZM50UC\01GB02REG.fm 00DWZ.book Page 13 Friday, August 31, 2012 11:49 AM masterpage:Right Fr Kunden in Europa Hiermit erklrt Sony Corporation, dass sich das Gert ZRX-HR50/C30 in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Weitere Informationen erhltlich unter:
http://www.compliance.sony.de/
Per i clienti in Europa Con la presente Sony Corporation dichiara che questo ZRX-HR50/C30 conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/
CE. Per ulteriori dettagli, si prega di consultare il seguente URL:
http://www.compliance.sony.de/
Para los clientes de Europa Por medio de la presente Sony Corporation declara que el ZRX-HR50/C30 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Para mayor informacin, por favor consulte el siguiente URL:
http://www.compliance.sony.de/
Voor de klanten in Europa Hierbij verklaart Sony Corporation dat het toestel ZRX-HR50/C30 in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Nadere informatie kunt u vinden op:
http://www.compliance.sony.de/
Fr kunder i Europa Hrmed intygar Sony Corporation att denna ZRX-HR50/C30 str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Fr ytterligare information g in p fljande hemsida: http://www.compliance.sony.de/
Para clientes na Europa Sony Corporation declara que este ZRX-HR50/C30 est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Para mais informacoes, por favor consulte a seguinte URL:
http://www.compliance.sony.de/
Til europiske kunder Undertegnede Sony Corporation erklrer herved, at flgende udstyr ZRX-HR50/C30 overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. For yderligere information g ind p flgende hjemmeside:
http://www.compliance.sony.de/
Asiakkaille Euroopassa Sony Corporation vakuuttaa tten ett ZRX-HR50/C30 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Halutessasi listietoja, ky osoitteessa:
http://www.compliance.sony.de/
For kunder i Europa Sony Corporation erklrer herved at utstyret ZRX-HR50/C30 er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 1999/5/EF. For flere detaljer, vennligst se:
http://www.compliance.sony.de/
E
Sony Corporation
ZRX-HR50/C30
1999/5/.
http://www.compliance.sony.de/
13 DWZ-M50/B30GB 4-445-504-12 (2) E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504122_GB\4445504122
\4445504122DWZM50UC\01GB02REG.fm 00DWZ.book Page 14 Friday, August 31, 2012 11:49 AM masterpage:Left Pro zkaznky v Evrop Sony Corporation tmto prohlauje, e tento ZRX-HR50/C30 je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Podrobnosti lze zskat na nsledujc URL:
http://www.compliance.sony.de/
Klientidele Euroopas Sony Corporation kinnitab kesolevaga seadme ZRX-HR50/C30 vastavust 1999/5/
E direktiivi phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. ksikasjalikum info:
http://www.compliance.sony.de/. Eurpai gyfeleinknek Alulrott, Sony Corporation nyilatkozom, hogy a(z) ZRX-HR50/C30 megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Tovbbi informcikat a kvetkez weboldalon tallhat:
http://www.compliance.sony.de/
14 Dla klientw w Europie Niniejszym Sony Corporation owiadcza, e ZRX-HR50/C30 jest zgodne z zasadniczymi wymaganiami oraz innymi stosownymi postanowieniami Dyrektywy 1999/5/
WE. Szczegowe informacje znale mona pod nastpujcym adresem URL:
http://www.compliance.sony.de/
Pentru clienii din Europa Prin prezenta, Sony Corporation declar c acest ZRX-HR50/C30 respect cerinele eseniale i este n conformitate cu prevederile Directivei 1995/5/EC. Pentru detalii, v rugm accesai urmtoarea adres:
http://www.compliance.sony.de/
Pre zkaznkov v Eurpe Sony Corporation tmto vyhlasuje, e ZRX-HR50/C30 spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. Podrobnosti zskate na nasledovnej webovej adrese:
http://www.compliance.sony.de/
Za stranke v Evropi Sony Corporation izjavlja, da je ta ZRX-HR50/C30 v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES. Za podrobnosti vas naproamo, e pogledate na URL:
http://www.compliance.sony.de/
DWZ-M50/B30GB 4-445-504-12 (2) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB03TOC.fm 00DWZ.book Page 15 Wednesday, August 15, 2012 3:38 PM masterpage:Right System Configuration Examples ....................................... 37 Configuration Examples for the DWZ-M50 ........................37 Configuration Example for the DWZ-B30GB .........................38 Troubleshooting ........................... 39 Important Notes on Use ...............42 Usage and Storage ..................42 Cleaning .................................42 Specifications ................................43 DWZ-M50 ..............................43 DWZ-B30GB .........................44 Table of Contents Package Contents ........................ 16 DWZ-M50 ............................. 16 DWZ-B30GB ........................ 17 Features ........................................ 18 DWZ-M50 ............................. 18 DWZ-B30GB ........................ 18 Using the CD-ROM manual ....... 19 Parts Identification ...................... 20 DWZ-M50 ............................. 20 DWZ-B30GB ........................ 23 Power Supply ............................... 27 Inserting Batteries .................. 27 Attaching the Supplied Accessories ................................... 29 Attaching the Supplied Accessories to the Handheld Microphone (ZTX-M01) ....... 29 Attaching the Supplied Accessories to the Half-Rack Receiver (ZRX-HR50) .......... 29 Attaching the Supplied Accessories to the Body-Pack Transmitter (ZTX-B01) ......... 30 Attaching the Supplied Accessories to the Compact Receiver (ZRX-C30) ............. 30 Receiver Settings ......................... 31 Half-Rack Receiver
(ZRX-HR50) ......................... 31 Compact Receiver
(ZRX-C30) ............................ 33 Transmitter Settings ................... 35 Configuring the Transmitting Channel Settings .................... 35 Channel Display .................... 35 Table of Contents 15 DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 16 Wednesday, August 15, 2012 3:38 PM masterpage:Left Package Contents This manual contains information on the Sony DWZ-M50/B30GB Digital Wireless Packages. The contents of each package are as follows. DWZ-M50 This set includes a handheld microphone (transmitter: ZTX-M01) and a half-rack receiver
(receiver: ZRX-HR50). Handheld microphone
(ZTX-M01) (1) Half-rack receiver
(ZRX-HR50) (1) Supplied accessories Mic holder (1) Antenna (2) AC adapter (1) Operating Instructions (1) CD-ROM (1) Waranty card (1) (for UC model only) Waranty booklet (1) (for SYV model only) 16 Package Contents DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 17 Wednesday, August 15, 2012 3:38 PM masterpage:Right DWZ-B30GB This set includes a body-pack (transmitter: ZTX-B01) and a compact receiver (receiver:
ZRX-C30). Body-pack transmitter
(ZTX-B01) (1) Compact receiver
(ZRX-C30) (1) Supplied accessories Guitar cable (1) Belt clip (1) Cable clamp (1) Belt clip screw (1) AC adapter (1) Operating Instructions (1) CD-ROM (1) Waranty card (1) (for UC model only) Waranty booklet (1) (for SYV model only) Package Contents 17 DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 18 Wednesday, August 15, 2012 3:38 PM masterpage:Left ZRX-HR50) and is ideal for use with vocals. ZTX-M01 A microphone designed with a sturdy metal body. Equipped with a muting function and an attenuator adjustment function, the unit supports a wide range of audio input levels. In addition, the interchangeable microphone unit allows you to use the microphone in a variety of applications.
* The microphone units mounting area has a diameter of 31.3 mm and a pitch of 1.0 mm. ZRX-HR50 A half-rack receiver equipped with large-
screen high-resolution color LCD that combines high-functionality with simple operability. The Best Channel Selection and Clear Channel Scan functions allow quick and easy configuration of safe channels. In addition, the 5-band graphic equalizer allows wide-range audio-quality adjustment. You can also select whether the muting function applies to the UNBALANCED OUTPUT TUNER/AUX connector. Using the optional RMM-HRD1 Rack Mount Kit allows you to mount the unit on a rack. DWZ-B30GB The DWZ-B30GB is a package that includes a body-pack transmitter
(transmitter: ZTX-B01) and a compact receiver (receiver: ZRX-C30) and is ideal for use with electric guitars, electric acoustic guitars, electric bass guitars, etc. Features The DWZ series is a digital wireless system that combines Sonys consistently developed superior audio technology, highly reliable wireless technology, and state-of-the-art digital signal processing technology. Using an unlicensed 2.4 GHz band, the system provides wide-range functionality with simple, user-friendly operability. By providing a package that is optimized for specific usage environments, the system offers a wireless solution to users ranging from those inexperienced with wireless systems to seasoned professionals. Superb audio quality By transmitting audio signals via 24-bit high-quality linear PCM digital transmission, without signal compression, decompression, or similar processing, the system provides superb audio quality and high-bandwidth transmissions that approach that of wired microphones. High reliability By allowing you to select from two RF modes based on your intended use and incorporating Sonys unique data processing technology, the system provides highly-reliable wireless transmission in wireless LAN environments. The receiver is equipped with two antennas with the antenna with the best reception status selected automatically via space diversity, providing stable reception with minimized audio breakup and noise occurrences. DWZ-M50 The DWZ-M50 is a package that includes a handheld microphone (transmitter: ZTX-
M01) and a half-rack receiver (receiver:
18 Features DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 19 Wednesday, August 15, 2012 3:38 PM masterpage:Right ZTX-B01 A transmitter designed with a sturdy metal body. Equipped with a muting function, an instrument/mic input switching function, and an attenuator adjustment function, the unit supports a wide range of audio input levels. The supplied belt clip can be rotated in 90-degree increments, allowing you to adjust the direction in which the cables extend based on your environment. ZRX-C30 A compact receiver equipped with an internal antenna that is capable of withstanding rough handling. Power can be supplied by the supplied 12 V AC adapter, by an external 9 V DC power supply, or by a square 9 V dry cell battery
(6LR61). The unit supports power distributors, allowing you to reduce noise caused by battery operation. The cable tone generator also allows you to match the quality of wireless and wired audio. This reduces the amount of equalizer adjustment necessary on the amp side during wireless transmission. The muting function does not affect the TUNER OUT connector, allowing tuning without sound output. Using the CD-
ROM manual The manual can be read on a computer with Adobe Reader installed. You can download Adobe Reader free from the Adobe website. 1 Open the index.html file in the CD-
ROM. 2 Select and click on the manual that you want to read. Note If you have lost or damaged the CD-ROM, you can purchase a new one from your Sony dealer or Sony service counter. Adobe and Adobe Reader are trademarks of Adobe Systems Incorporated in the United States and/or other countries. Using the CD-ROM manual 19 DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 20 Wednesday, August 15, 2012 3:38 PM masterpage:Left Parts Identification DWZ-M50 Handheld microphone
(transmitter: ZTX-M01) Top (when microphone unit is removed) Grip interior a Microphone unit The standard-equipped microphone unit can be interchanged with another interchangeable microphone unit with a diameter of 31.3 mm and a pitch of 1.0 mm. For details on attaching and removing the microphone unit, see Replacing the microphone unit (page 29). b BATT/MUTING (remaining battery
/ muting) indicator Lights when the unit is turned on. This indicates the remaining battery charge and the on/off status of the muting function. 20 Parts Identification Indicator Lit (green) Lit (red) Blinking (orange) Muting function Status Good Almost dead enabled (i.e., audio disabled) The remaining battery indication only appears when alkaline dry cell batteries are being used. c POWER/MUTING button Turns the unit on or off. This button can also be used to enable or disable the muting function. Button operation Press the button for at least 1 second Press the button until indicator turns off Press the button Function Turn power on Turn power off Enable muting function Disable muting function d Grip Contains the control buttons, channel display, and battery compartment. Open the grip to configure channel settings and replace the batteries. For details on opening the grip, see Inserting Batteries (page 27). e Antenna cover Contains the antenna. Caution Do not squeeze the antenna cover. Doing so will weaken the signal that is transmitted, decreasing the transmission range. DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 21 Wednesday, August 15, 2012 3:38 PM masterpage:Right f ATT (attenuator) switch Set the attenuation level based on the sound volume. UNLOCK: Releases the lock to enable button operation. Attenuation level (dB) 0 6 12 When to use Standard switch position Set to this position if a red bar occasionally appears in the audio level meter of the receiver. Set to this position if a red bar always appears in the audio level meter of the receiver. The attenuator switch is located at the top of the unit when the microphone unit is removed. For details on attaching and removing the microphone unit, see Replacing the microphone unit (page 29). g Channel display Displays the transmission channel. The display disappears after about 10 seconds. You can display it again by pressing the channel selection button. For details on the channel display, see Channel Display (page 35). h Channel selection button Allows you to select the RF mode and the transmitting channel. For details on selecting the RF mode and transmitting channel, see Configuring the Transmitting Channel Settings (page 35). i Button lock switch Locks the POWER/MUTING button and the channel selection button. This prevents unintentional operations, such as accidentally turning the power off. LOCK: Locks the buttons to disable their operation. Caution You cannot turn on the unit while this switch is set to the LOCK position, as even the power button is disabled. Set the switch to the UNLOCK position to perform operations. Half-rack receiver (receiver:
ZRX-HR50) Front a POWER button Turns the unit on or off. b POWER indicator Lights when the unit is turned on. c Display Displays setting configurations and other information. A Receiving channel indicator Displays the receiving channel. Parts Identification 21 DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 22 Wednesday, August 15, 2012 3:38 PM masterpage:Left B Remaining transmitter battery b UNBALANCED OUTPUT TUNER/
indicator Displays the remaining battery charge of the transmitter. An approximate duration is displayed for the remaining usage time. This duration appears only when signals are being received. C Audio level meter Displays the audio level. Set the audio level so that the yellow or red bar does not appear. D Equalizer status Displays the on/off status of the equalizer. E Receiving level indicator Displays the reception status of the radio signal. More bars indicate more stable reception. d ESC (escape) button Cancels operations, or returns to the main screen from the settings screen. e Rotary encoder Allows you to change settings. For details on changing settings, see Receiver Settings (page 31). Rear a ANTENNA a/b connector (BNC type) Connect the supplied antenna here. 22 Parts Identification AUX (external audio output) connector (headphone jack) Connect monitoring equipment and similar peripheral devices here. The audio output from the UNBALANCED OUTPUT TUNER/AUX connector will continue, even if the muting function of the transmitter is enabled. You can enable or disable the audio from this connector via the settings in the receivers display. For details on settings, see Configuring the transmitter muting function for the UNBALANCED OUTPUT TUNER/AUX connector (page 33). For details on connections, see System Configuration Examples (page 37). c UNBALANCED OUTPUT MAIN
(main audio output) connector
(headphone jack) Connect a mixer or an amp here. For details on connections, see System Configuration Examples (page 37). d BALANCED OUTPUT connector
(XLR type) Connect a mixer or similar device here. For details on connections, see System Configuration Examples (page 37). e MIC/LINE (audio output level) selector Selects the audio output level of the BALANCED OUTPUT connector. MIC: Sets the audio output level to the mic level. LINE: Sets the audio output level to the line level. Caution Do not set the selector to the LINE position while outputting audio to an audio mixer or similar device. Inputting audio at excessive levels may distort audio or damage the playback/recording device. DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 23 Wednesday, August 15, 2012 3:38 PM masterpage:Right f Cable clamp Secures the cable of the supplied AC adapter. The remaining battery indication only appears when alkaline dry cell batteries are being used. g DC IN 12V (power input) connector Connect the supplied AC adapter here. DWZ-B30GB Body-pack transmitter
(transmitter: ZTX-B01) a Antenna cover Contains the antenna. Caution Do not squeeze the antenna cover. Doing so will weaken the signal that is transmitted, decreasing the transmission range. b BATT (remaining battery) indicator Indicates the remaining battery charge when the unit is turned on. Indicator Lit (green) Lit (red) Status Good Almost dead c Button lock switch Locks the POWER/MUTING button and the CHANNEL SELECT button. This prevents unintentional operations, such as accidentally turning the power off. LOCK: Locks the buttons to disable their operation. UNLOCK: Releases the lock to enable button operation. Caution You cannot turn on the unit while this switch is set to the LOCK position, as even the power button is disabled. Set the switch to the UNLOCK position to perform operations. d Audio input connector Connect a guitar or similar instrument here using the supplied guitar cable. e AUDIO/MUTING indicator Indicates the input level of the audio signal and the status of the muting function. Indicator Lit (green) Lit (red) Off Status Audio input present Excessive audio input Audio input weak or nonexistent Blinking (orange) Muting function enabled (i.e., audio disabled) f INPUT switch Set this based on the connected equipment. INST: Set to this position when a guitar or similar instrument is connected. MIC: Set to this position when a microphone is connected. Parts Identification 23 DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 24 Wednesday, August 15, 2012 3:38 PM masterpage:Left j Channel display Displays the transmission channel. The display disappears after about 10 seconds. You can display it again by pressing the channel selection button. For details on the channel display, see Channel Display (page 35). k CHANNEL SELECT button Allows you to select the RF mode and the transmitting channel. For details on selecting the RF mode and transmitting channel, see Configuring the Transmitting Channel Settings (page 35). Compact receiver (receiver:
ZRX-C30) Top/front Left/rear Caution Do not set the switch to the INST position while outputting audio to an audio mixer or similar device. Inputting audio at excessive levels may distort audio or damage the playback/recording device. For details on the setting, see System Configuration Examples (page 37). g ATT (attenuator) switch Set the attenuation level based on the connected equipment. Attenuation level (dB) 0 10 20 When to use Standard switch position Set to this position if the AUDIO/MUTING indicator on the receiver occasionally lights red. Set to this position if the AUDIO/MUTING indicator on the receiver is always lit red. h Battery compartment Insert two LR6 (size AA) batteries here. For details on how to insert batteries, see Inserting Batteries (page 27). i POWER/MUTING button Turns the unit on or off. This button can also be used to enable or disable the muting function. Button operation Press the button for at least 1 second Press the button until indicator turns off Press the button Function Turn power on Turn power off Enable muting function Disable muting function 24 Parts Identification DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 25 Wednesday, August 15, 2012 3:38 PM masterpage:Right a POWER indicator Lights when the unit is turned on. When a square 9 V dry cell battery (6LR61) is being used, this also indicates the remaining battery charge. Indicator Lit (green) Lit (red) Status Good Almost dead b RF (radio frequency input) indicator Displays the reception status of the radio signal. Indicator Lit (green) Lit (red) Off Status Reception good Reception poor No reception c AUDIO indicator Indicates the status of the audio signal. Indicator Lit (green) Lit (red) Off Status Audio input present Excessive audio input Audio input weak or nonexistent d TUNER OUT connector (TS phone type) Connect a tuning meter or similar device here. Caution The audio output from the TUNER OUT connector will continue, even if the muting function of the transmitter is enabled. For details on connections, see System Configuration Examples (page 37). e MAIN OUT connector (TS phone type) Connect a guitar amp or bass amp here. For details on connections, see System Configuration Examples (page 37). f CABLE TONE (cable tone generator) switch Turn the knob to configure the cable tone generator. For details on the cable tone generator, see Configuring the cable tone generator (page 34). g CHANNEL (channel selection) switch Turn the knob to select the receiving channel. The receiving channel will be set to the channel of the RF mode that is selected with the RF MODE switch. For details on settings, see Configuring the RF mode and receiving channel (page 33). h RF MODE indicators The indicator of the RF mode that is selected with the RF MODE switch lights. i RF MODE (RF mode selection) switch Selects the RF mode. For details on settings, see Configuring the RF mode and receiving channel (page 33). j BALANCED OUTPUT connector
(XLR type) Connect a mixer or similar device here. For details on connections, see System Configuration Examples (page 37). k Cable clamp attachment hole Attach the supplied cable clamp here. For details on attaching the cable clamp, see Attaching the cable clamp (page 30). Parts Identification 25 DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 26 Wednesday, August 15, 2012 3:38 PM masterpage:Left l DC IN 9V (power input) connector Bottom a Battery compartment Insert a square 9 V dry cell (6LR61) battery here. For details on how to insert batteries, see Inserting Batteries (page 27). Use this to connect to a commercially available 9 V DC power supply unit. m DC IN 12V (power input) connector Connect the supplied AC adapter here. n POWER switch Turns the unit on or off. o TX MUTING (transmitter muting) indicator Indicates the status of the muting function for the transmitter. This blinks orange when the muting function is enabled. p TX BATT (remaining transmitter battery) indicator Indicates the remaining battery charge of the transmitter. Indicator Lit (green) Lit (red) Status Good Almost dead The remaining battery indication only appears when alkaline dry cell batteries are being used. 26 Parts Identification DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 27 Wednesday, August 15, 2012 3:38 PM masterpage:Right Replace only with the same or equivalent type recommended by the manufacturer. When you dispose of the battery, you must obey the law in the relative area or country. ATTENTION Il y a danger dexplosion sil y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du mme type ou dun type quivalent recommand par le constructeur. Lorsque vous mettez la batterie au rebut, vous devez respecter la lgislation en vigueur dans le pays ou la rgion o vous vous trouvez. VORSICHT Explosionsgefahr bei Verwendung falscher Batterien. Batterien nur durch den vom Hersteller empfohlenen oder einen gleichwertigen Typ ersetzen. Wenn Sie die Batterie entsorgen, mssen Sie die Gesetze der jeweiligen Region und des jeweiligen Landes befolgen. Note Replacing the batteries during operation will result in high noise. Be sure to turn off the unit before replacing the batteries. Handheld microphone (ZTX-
M01) 1 Press and hold the POWER/MUTING button to turn off the unit. 2 Turn the grip in the direction of the arrow, and pull down the grip until the battery compartment is shown. Power Supply This section describes the power supply for each device. For details on how to insert batteries, see Inserting Batteries (page 27). Handheld microphone (ZTX-
M01), body-pack transmitter
(ZTX-B01) Power supplied by two LR6 (size AA) batteries. The following types of battery can be used.
Alkaline dry cell batteries
Rechargeable nickel-metal hydride batteries
Lithium batteries Half-rack receiver (ZRX-HR50) Power supplied by the supplied AC adapter. Compact receiver (ZRX-C30) Power can be supplied by the supplied AC adapter, by a commercially available 9 V DC power supply unit, or by a square 9 V dry cell battery (6LR61). Priority sequence for power supplies When multiple power supplies are made available for use, they will be used in the following order of priority. A 12 V power input B 9 V power input C Square 9 V dry cell battery (6LR61) Inserting Batteries CAUTION Danger of explosion if battery is incorrectly replaced. Power Supply 27 DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 28 Wednesday, August 15, 2012 3:38 PM masterpage:Left 3 Insert two new LR6 (size AA) batteries while making sure the polarities are correct. 4 Close the grip and turn it in the reverse direction in the step 2 above. Body-pack transmitter (ZTX-
B01) 1 Press and hold the POWER/MUTING button to turn off the unit. 2 Slide the battery-compartment catches inward (in the direction of the arrows b B) to take out the compartment. 3 Insert two new LR6 (size AA) batteries into the battery compartment while making sure the polarities are correct, and then reinsert the compartment into the unit. Compact receiver (ZRX-C30) 1 Set the POWER switch to the OFF position to turn off the unit. 2 Slide open the battery compartment cover at the bottom of the device. 3 Connect the new square 9 V dry cell
(6LR61) battery to the units battery snap while making sure the polarities are correct, and then insert the battery into the compartment. 4 Close the battery compartment. 28 Power Supply DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 29 Wednesday, August 15, 2012 3:38 PM masterpage:Right Attaching the Supplied Accessories This section describes how to attach the supplied accessories to each unit. Attaching the Supplied Accessories to the Handheld Microphone
(ZTX-M01) Attaching the microphone holder Insert the bottom part of the microphone into the holder. Replacing the microphone unit To remove the microphone unit Turn the microphone unit in the direction of the arrow. To attach the microphone unit Turn the microphone unit in the opposite direction from when you removed it, and make sure that the unit is securely attached to the microphone. Attaching the Supplied Accessories to the Half-
Rack Receiver (ZRX-HR50) Attaching the antenna Insert the supplied antenna into the ANTENNA a/b connector at the rear of the receiver and turn it. Attaching the Supplied Accessories 29 DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 30 Wednesday, August 15, 2012 3:38 PM masterpage:Left Attaching the Supplied Accessories to the Body-
Pack Transmitter (ZTX-B01) Attaching the belt clip Attaching the Supplied Accessories to the Compact Receiver (ZRX-
C30) Attaching the cable clamp Align the mounting hole at the rear of the transmitter with the hole in the middle of the supplied belt clip, and secure the belt clip using the supplied belt clip screw. You can also rotate the belt clip 180 degrees or 90 degrees to the left or right before securing it. To attach to a guitar strap Insert the cable clamp into the cable clamp attachment hole on the left side of the receiver. Slide the guitar strap into the belt clip on the unit completely, and make sure it is secure. Caution Depending on the thickness and width of the strap, the belt clip may not attach securely. 30 Attaching the Supplied Accessories DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504121_GB\4445504121
\4445504121DWZM50UC\01GB04BAS.fm 00DWZ.book Page 31 Saturday, August 25, 2012 6:24 PM masterpage:Right Receiver Settings Half-Rack Receiver (ZRX-
HR50) Use the rotary encoder and the ESC button to configure settings on the ZRX-HR50 half-rack receiver. Perform setting operations as follows. Confirm: Press the rotary encoder. Move cursor: Turn the rotary encoder. Cancel: Press the ESC button. Displaying the settings menu Press the rotary encoder to display the
[Setup] screen in the display. To return to the main screen from the
[Setup] screen, press the ESC button. Configuring the receiving channel settings Two RF modes (channel modes), wide band and narrow band, are available on the DWZ. Each RF mode consists of six channels. Select the appropriate channel according to your intended use. RF mode Wide band
(WIDE) Transmitting channel number 1/2/3/4/5/6 a/b/c/d/e/f Narrow band
(NARROW) Description This mode reduces any interference to other wireless equipment. This mode uses the Clear Channel Scan function, making it useful for avoiding any interference from other wireless equipment. Caution When using multiple channels (up to six), the two RF modes, wide band and narrow band, cannot be used simultaneously. Select only one RF mode during use. To select the RF mode 1 In the [Setup] screen, select [Advanced Settings]. 2 Select [RF Mode Settings]. The [RF Mode Settings] screen appears. 3 Select [Wide Band] or [Narrow Band]. When the configuration is complete, the main screen appears again. Receiver Settings 31 DWZ-M50/B30GB 4-445-504-12 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 32 Wednesday, August 15, 2012 3:38 PM masterpage:Left C Select [Manual Setup]
Configure the channel manually. Select the channel you want to use. This completes the configuration, and the main screen appears again. Caution If you change the channel setting, be sure to change the channel setting on the transmitter to the same channel. If the receiver channel and transmitter channel are not identical, audio will not be output. Configuring the equalizer 1 In the [Setup] screen, select [Audio Setup]. The [Audio Setup] screen appears. 2 Select [Equalizer]. The [Equalizer] screen appears. 3 Select [ON] to enable the equalizer function, or [OFF] to disable it. If you select [ON], the equalizer settings screen appears. If you select [OFF], configuration is complete and the main screen appears again. 4 Select the frequency for which you want to adjust the level, and adjust the setting. To select the channel 1 In the [Setup] screen, select [Channel Setup]. The [Channel Setup] screen appears. 2 Specify the channel using one of the following methods. A Select [Best Channel Selection]
The channel with the least interference will be configured automatically. B Select [Clear Channel Scan]
The status of all the channels in the selected RF mode will be displayed, allowing you to select the channel you want to use. If there are no open channels, No Clear Channel appears. Display White font
(underlined) White font Gray font No Clear Channel Status Channel with low interference. Channel with relatively low interference. Channel with high interference, or channel that is being used by another device. No usable channels available. 32 Receiver Settings DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 33 Wednesday, August 15, 2012 3:38 PM masterpage:Right 5 Select [Set]. The setting value is saved. To cancel the setting, press the ESC button. Configuring the transmitter muting function for the UNBALANCED OUTPUT TUNER/AUX connector You can select whether the muting function of the transmitter will be applied to the audio output of the UNBALANCED OUTPUT TUNER/AUX (external audio output) connector. Caution The audio output from the UNBALANCED OUTPUT TUNER/AUX connector will continue, even if the muting function of the transmitter is enabled. To disable the audio output from the UNBALANCED OUTPUT TUNER/AUX connector, enable the TX Muting function. 1 In the [Setup] screen, select [Audio Setup]. The [Audio Setup] screen appears. 2 Select [AUX/Tuner Out Settings]. The [AUX/Tuner Out Settings] screen appears. 3 Select whether to enable the muting function. TX Muting Valid: Enables the TX Muting function. The audio output from the connector is disabled when the muting function of the transmitter is enabled. TX Muting Invalid: Disables the TX Muting function. The audio out put from the connector will continue, regardless of whether the muting function of the transmitter is enabled or disabled. This completes the configuration, and the main screen appears again. Configuring the battery type Specify the type of battery that is being used in the transmitter so that the transmitters remaining battery charge can be displayed properly on this unit. 1 In the [Setup] screen, select [Advanced Settings]. 2 Select [Battery Type]. 3 Select the battery type. Alkaline: Alkaline dry cell batteries are being used in the transmitter. Ni-MH: Rechargeable nickel-metal hydride batteries are being used in the transmitter. Lithium: Lithium batteries are being used in the transmitter. This completes the configuration, and the main screen appears again. Compact Receiver (ZRX-
C30) Configuring the RF mode and receiving channel Two RF modes (channel modes), wide band and narrow band, are available on the DWZ. Each RF mode consists of six channels. Select the appropriate channel according to your intended use. Receiver Settings 33 DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504121_GB\4445504121
\4445504121DWZM50UC\01GB04BAS.fm 00DWZ.book Page 34 Saturday, August 25, 2012 6:24 PM masterpage:Left Configuring the cable tone generator The cable tone generator is a function that modifies sound properties to simulate the quality of a wired cable connection. You can simulate the sound quality of a cable that is 1 m to 25 m in length by setting the CABLE TONE switch to the corresponding number (m). Supposed cable length (m): OFF/1/3/5/8/
12/18/25 RF mode Wide band
(WIDE) Transmitting channel number 1/2/3/4/5/6 a/b/c/d/e/f Narrow band
(NARROW) Description This mode reduces any interference to other wireless equipment. This mode uses the Clear Channel Scan function, making it useful for avoiding any interference from other wireless equipment. Caution When using multiple channels (up to six), the two RF modes, wide band and narrow band, cannot be used simultaneously. Select only one RF mode during use. 1 Set the RF MODE (RF mode selection) switch to WIDE or NARROW. 2 Turn the CHANNEL (channel selection) switch to set the receiving channel. Caution If you change the channel setting, be sure to change the channel setting on the transmitter to the same channel. If the receiver channel and transmitter channel are not identical, audio will not be output. 34 Receiver Settings DWZ-M50/B30GB 4-445-504-12 (1) E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504121_GB\4445504121
\4445504121DWZM50UC\01GB04BAS.fm 00DWZ.book Page 35 Saturday, August 25, 2012 6:24 PM masterpage:Right Transmitter Settings Configuring the Transmitting Channel Settings Two RF modes (channel modes), wide band and narrow band, are available on the DWZ. Each RF mode consists of six channels. Select the appropriate channel according to your intended use. RF mode Wide band
(WIDE) Transmitting channel number 1/2/3/4/5/6 a/b/c/d/e/f Narrow band
(NARROW) Description This mode reduces any interference to other wireless equipment. This mode uses the Clear Channel Scan function, making it useful for avoiding any interference from other wireless equipment. Caution When using multiple channels (up to six), the two RF modes, wide band and narrow band, cannot be used simultaneously. Select only one RF mode during use. Selecting the RF mode 1 Press and hold the POWER/MUTING button to turn off the unit. 2 Press and hold the POWER/MUTING button (about 1 second) while holding down the channel selection button. 0 blinks in the channel display. 3 Press the channel selection button to select 1 or a. 4 Press the POWER/MUTING button. Selecting the channel 1 Press and hold the channel selection button while the unit is turned on. The channel display blinks. 2 Press the channel selection button to select the channel. 3 Press and hold the channel selection button to apply the channel selection. Caution If you change the channel setting on the transmitter, be sure to change the channel setting on the receiver to the same channel. If the receiver channel and transmitter channel are not identical, audio will not be output. Channel Display Each channel will appear as follows in the transmitters channel display. Transmitter Settings 35 DWZ-M50/B30GB 4-445-504-12 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 36 Wednesday, August 15, 2012 3:38 PM masterpage:Left RF mode Wide band
(WIDE) Channel number 1 2 3 4 a d 5 6 b c e f Narrow band
(NARROW) 36 Transmitter Settings DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 37 Wednesday, August 15, 2012 3:38 PM masterpage:Right System Configuration Examples Note Production of the peripheral and relating devices may have been discontinued. Upon selecting the devices to be used with this product, consult your nearest Sony representative or the dealer from whom you purchased the product. Configuration Examples for the DWZ-M50 Mixer, recorder, etc. Antenna
(supplied) Antenna
(supplied) Half-rack receiver
(ZRX-HR50) UNBALANCED OUTPUT MAIN (main audio output) connector ANTENNA a connector AC adapter
(supplied) ANTENNA b connector DC IN 12V (power input) connector BALANCED OUTPUT connector Mixer Power amp Speaker Handheld microphone
(ZTX-M01) System Configuration Examples 37 DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 38 Wednesday, August 15, 2012 3:38 PM masterpage:Left Configuration Example for the DWZ-B30GB Mixer, recorder, etc. AC adapter
(supplied) BALANCED OUTPUT connector DC IN 12V
(power input) connector Compact receiver (ZRX-C30) Effector Guitar amp Guitar or bass TUNER OUT connector MAIN OUT connector Guitar tuner INPUT switch: INST Body-pack transmitter
(ZTX-B01) 38 System Configuration Examples DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 39 Wednesday, August 15, 2012 3:38 PM masterpage:Right Troubleshooting Check the following if problems occur. Should any problem persist, consult your Sony dealer. Meanings The polarity orientation of the batteries in the battery compartment is incorrect. The batteries are exhausted. Replace the batteries with new Remedy Insert the batteries with the correct polarity orientation. ones. Button operations are locked. Set the button lock switch to UNLOCK. The batteries are exhausted. Replace the batteries with new Symptom The unit does not turn on. The batteries drain quickly. There is no sound. Manganese batteries are being used. The unit is being used under cold conditions. The RF mode or channel setting on the transmitter is different from that on the receiver. The sound is weak. The attenuation level on the transmitter is too high. The output level of the receiver does not match the input level setting of the connected device. ones. Use alkaline batteries. The battery life of a manganese battery is less than half that of an alkaline battery. The batteries drain quickly under cold conditions. Use the same RF mode and channel setting on both the transmitter and the receiver. The input level is low. Set the attenuation level on the transmitter to the appropriate level. Set the MIC/LINE selector according to the input level of the connected device (ZRX-HR50). Troubleshooting 39 DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 40 Wednesday, August 15, 2012 3:38 PM masterpage:Left Symptom The sound is distorted. Meanings The attenuation level of the transmitter is too low. Remedy The audio input level is too high. Set the attenuation level on the transmitter to a level where sound is not distorted. The audio input level is too high. Specify INST input. Set the MIC/LINE selector according to the input level of the connected device (ZRX-HR50). Shorten the distance between the transmitter and receiver until audio breakup does not occur. Change the selected channel, or move the devices that are causing interference away from the unit. Do not use the same channel for more than one transmitter. Attach the supplied antenna. The transmitter is set to MIC input. The output level of the receiver does not match the input level setting of the connected device. The transmitter and receiver are far away from each other. Signal interference from other devices is occurring. Two or more transmitters are set to the same channel. The antenna is not attached to the receiver. Wide band and narrow band are being used simultaneously. When using multiple channels simultaneously, use channels from a single RF mode, either wide mode or narrow mode. Set the cable tone generator to a suitable setting (ZRX-C30). Set the equalizer to a suitable setting (ZRX-HR50). The cable tone generator setting is incorrect. The equalizer setting is incorrect. Button operations are locked. Set the button lock switch to The RF mode is being configured. UNLOCK. The unit cannot be turned off while RF mode configuration is in progress (ZTX-M01/B01). Button operations are locked. Set the button lock switch to The settings menu is not open. UNLOCK. Follow the instructions in Displaying the settings menu and Configuring the receiving channel settings (page 31) to configure settings (ZRX-HR50). DWZ-M50/B30GB 4-445-504-11 (1) Noise occurs. The service area
(i.e., operating range) is small. The audio quality is abnormal. The unit does not turn off when the POWER switch is pressed. Channels cannot be changed. 40 Troubleshooting E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 41 Wednesday, August 15, 2012 3:38 PM masterpage:Right Symptom The RF indicator on the receiver lights even when the transmitter is off. Meanings Interference is being received. Remedy Set the receiver to a channel for which the RF indicator does not light, and then set the transmitter to the same channel. Troubleshooting 41 DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 42 Wednesday, August 15, 2012 3:38 PM masterpage:Left Cleaning Clean the surface and the connectors of the DWZ series components with a dry, soft cloth. Never use thinner, benzene, alcohol or any other chemicals, since these may mar the finish. To prevent electromagnetic interference from portable communication devices The use of portable telephones and other communication devices near the DWZ series components may result in malfunction and interference with audio signals. It is recommended that portable communication devices near the DWZ series components be turned off. Important Notes on Use The operating range of the 2.4 GHz band used by the units may be reduced and noise may occur due to interference from the operating environment or from other wireless stations. In such cases, moving the units away from other wireless stations or changing the channel may resolve the problem.
If other wireless stations are being used nearby, distance the units from the stations as much as possible, or change the channel or RF mode being used.
If this does not resolve the problem, try turning off the other wireless stations
(i.e., stopping their radio signals) one by one. Caution To prevent audio noise caused by interference from other transmitters or by excessive RF inputs, maintain a distance of at least 30 cm between the transmitter and the receiver. Usage and Storage
Operating the DWZ series components near electrical equipment (motors, transformers, or dimmers) may cause it to be affected by electromagnetic induction. Keep the DWZ series components as far from such equipment as possible.
The presence of the lighting equipment may produce electrical interference over the entire frequency range. Position the DWZ series components so that interference is minimized. 42 Important Notes on Use DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504121_GB\4445504121
\4445504121DWZM50UC\01GB04BAS.fm 00DWZ.book Page 43 Saturday, August 25, 2012 6:23 PM masterpage:Right Specifications Design and specifications are subject to change without notice. Note Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER. DWZ-M50 Carrier frequencies 2402.0 MHz to 2478.5 MHz Occupied RF bandwidth 2.5 MHz Type of emission F1D and F1E Modulation method GFSK Operating temperature 0 C to 50 C (32 F to 122 F) Storage temperature 20 C to +60 C (4 F to +130 F) Handheld microphone (ZTX-
M01) RF output level 10 mW (e.i.r.p.) Antenna
/4 monopole antenna Microphone type Dynamic: unidirectional Frequency response Transmission: 10 Hz to 22 kHz Microphone unit: 70 Hz to 16 kHz Maximum input level 142 dBSPL (when attenuator level is 12 dB) Dynamic range 102 dB (A-weighted) Power requirements 3.0 V DC (two LR6 (size AA) alkaline dry cell batteries) Battery life Approx. 10 hours of continuous use
(25 C (77 F) ambient temperature, Sony LR6 (size AA) alkaline dry cell batteries) Dimensions 48 8 5 2 Unit: mm 48 258 mm (1 15/16 10 1/4 inches) (diameter/length) Mass Approx. 305 g (11 oz.) (including batteries) Half-rack receiver (ZRX-HR50) Reception type Space diversity Specifications 43 DWZ-M50/B30GB 4-445-504-12 (1) E:\#works_2\120800937_DWZ-
M50_B30GB\120800937_4445504121_GB\4445504121
\4445504121DWZM50UC\01GB04BAS.fm 00DWZ.book Page 44 Saturday, August 25, 2012 6:23 PM masterpage:Left ANTENNA a/b connector BNC-R, 50 Frequency response 10 Hz to 22 kHz Maximum output level Balanced Output MIC: 22 dBu LINE: +24 dBu Unbalanced Output: +8 dBu Reference output level Balanced Output MIC: 58 dBu LINE: 12 dBu Unbalanced Output: 28 dBu Power requirements External DC input: 12 V DC Consumption current (during 12 V DC input) 220 mA Dimensions 6 9 4 4 168 Unit: mm 168 44 96 mm (6 5/8 1 3/4 3 7/8 inches) (w/h/d) Mass Approx. 510 g (1 lb. 2.0 oz.) DWZ-B30GB Carrier frequencies 2402.0 MHz to 2478.5 MHz Occupied RF bandwidth 2.5 MHz Type of emission F1D and F1E 44 Specifications Modulation method GFSK Operating temperature 0 C to 50 C (32 F to 122 F) Storage temperature 20 C to +60 C (4 F to +130 F) Body-pack transmitter (ZTX-
B01) RF output level 10 mW (e.i.r.p.) Antenna
/4 monopole antenna Frequency response 10 Hz to 22 kHz Maximum input level MIC: 22 dBu INST: +8 dBu
(when attenuator level is 0 dB) Reference input level MIC: 58 dBu INST: 28 dBu
(when attenuator level is 0 dB) Dynamic range MIC: 102 dB (A-weighted) INST: 98 dB (A-weighted) Power requirements 3.0 V DC (two LR6 (size AA) alkaline dry cell batteries) Battery life Approx. 10 hours of continuous use
(25 C (77 F) ambient temperature, Sony LR6 (size AA) alkaline dry cell batteries) DWZ-M50/B30GB 4-445-504-12 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 45 Wednesday, August 15, 2012 3:38 PM masterpage:Right Dimensions 13 temperature, Sony square 9 V alkaline dry cell battery) Dimensions 74 2 3 1 1 4 Unit: mm 132 41 74 mm (5 1/4 1 5/8 3 inches) (w/h/d) Mass Approx. 205 g (7.2 oz.) (including battery) 3 0 1 0 8 63 20 Unit: mm 63 80 20 mm (2 1/2 3 1/4 13/16 inches) (w/h/d) (excluding the antenna) Mass Approx. 156 g (5.5 oz.) including batteries Compact receiver (ZRX-C30) Reception type Space diversity Antenna Internal /4 monopole antenna Frequency response 10 Hz to 22 kHz Maximum output level Balanced Output: +16 dBu Main/Tuner Output: +8 dBu Reference output level Balanced Output: 20 dBu Main/Tuner Out: 28 dBu Power requirements External DC input: 12 V DC / 9 V DC Dry cell battery: Square 9 V alkaline dry cell battery
(6LR61) Consumption current During 12 V DC input: 90 mA During 9 V DC input: 120 mA Battery life Approx. 3.5 hours of continuous use (25 C (77 F) ambient Specifications 45 DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 46 Wednesday, August 15, 2012 3:38 PM masterpage:Left 46 Specifications DWZ-M50/B30GB 4-445-504-11 (1) E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB04BAS.fm 00DWZ.book Page 47 Wednesday, August 15, 2012 3:38 PM masterpage:Right Specifications 47 DWZ-M50/B30GB 4-445-504-11 (1) masterpage:Right 00DWZ.book Page 48 Wednesday, August 15, 2012 3:38 PM E:\#works_2\120700180_DWZ-
M50_B30GB\120700180_4445504111_GB\4445504111
\4445504111DWZM50UC\01GB05BCO.fm Sony Corporation Printed in Korea DWZ-M50/B30GB 4-445-504-11 (1)
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-09-07 | 2402 ~ 2478.5 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2012-09-07
|
||||
1 | Applicant's complete, legal business name |
Sony Corporation
|
||||
1 | FCC Registration Number (FRN) |
0003739166
|
||||
1 | Physical Address |
1-7-1 Konan
|
||||
1 |
Tokyo, N/A 108-0075
|
|||||
1 |
Japan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
e******@jp.ul.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
AK8
|
||||
1 | Equipment Product Code |
ZTXM01
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
R****** T****
|
||||
1 | Title |
Senior Manager
|
||||
1 | Telephone Number |
81-50********
|
||||
1 | Fax Number |
81-50********
|
||||
1 |
c******@jp.sony.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
UL Japan, Inc.
|
||||
1 | Name |
G**** I********
|
||||
1 | Physical Address |
1-22-3 Megumigaoka, Hiratsuka-shi
|
||||
1 |
Kanagawa-ken, 259-1220
|
|||||
1 |
Japan
|
|||||
1 | Telephone Number |
81-46********
|
||||
1 | Fax Number |
81-46********
|
||||
1 |
G******@ul.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/06/2013 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | DIGITAL WIRELESS MICROPHONE | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is Conducted. End-users must be provided with specific operating instructions for satisfying RF exposure compliance. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
UL Japan, Inc. Shonan EMC EMC Lab.
|
||||
1 | Name |
T******** H****
|
||||
1 | Telephone Number |
+81-5********
|
||||
1 | Fax Number |
+81 5********
|
||||
1 |
T******@jp.ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2478.50000000 | 0.0054000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC