all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Manual | Users Manual | 1.44 MiB | / June 04 2007 | |||
1 | External Photos | / June 04 2007 | ||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | / June 04 2007 | ||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Setup Photos | / June 04 2007 | ||||||
1 | Test Report | |||||||
1 | Test Report |
1 | Manual | Users Manual | 1.44 MiB | / June 04 2007 |
3-097-195-11(1) Micro HI-FI Component System Operating Instructions Owners Record Th e model and serial numbers are located on the rear of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. ______________ Serial No. ______________ CMT-DH7BT 2007 Sony Corporation CMT-DH7BT.GB.3-097-195-11(1) CAUT You ar modifi this m operat Th is eq operat antenn Th is eq radiati uncon FCC r Guidel Th is eq level th FCC r Guidel withou evalua it shou least 2 and pe hands, U.S.A mode WARNING To reduce the risk of fi re or electric shock, do not expose this apparatus to rain or moisture. CAUTION Th e use of optical instruments with this product will increase eye hazard. Notice for the customers in the U.S.A. Note to CATV system installer:
Th is reminder is provided to call the CATV system installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifi es that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. The following FCC statement applies only to the version of this model manufactured for sale in the U.S.A. Other versions may not comply with FCC technical regulations. WARNING Th is equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Th ese limits are designed to provide reasonable protection against harmful interference in a residential installation. Th is equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Th is symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of suffi cient magnitude to constitute a risk of electric shock to persons. Th is symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 2GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
About this manual Icons, such as
, listed at the top of each explanation indicate what kind of media can be used with the function being explained. Th e English on-screen display is used for illustration purposes only. Th e Control Menu items may be diff erent depending on the disc. Th e Setup Menu items may be diff erent depending on the area. CAUTION You are cautioned that any changes or modifi cations not expressly approved in this manual could void your authority to operate this equipment. Th is equipment must not be co-located or operated in conjunction with any other antenna or transmitter. Th is equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. Th is equipment has a very low RF energy level that is deemed to comply with FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20cm and more between the radiator and persons body (excluding extremities:
hands, wrists, feet and legs). U.S.A., Canadian and Australian models only ENERGY STAR is a U.S. registered mark. As an ENERGY STAR partner, Sony Corporation has determined that this product meets the ENERGY STAR guidelines for energy effi ciency. des
, in ound e point pplies el S.A. with found B the d to t es, ere l
, ect e he tlet which ed 3GB CMT-DH7BT.GB.3-097-195-11(1) Table of Contents About this manual ............................... 3 Playable discs ........................................ 5 Guide to parts and controls ............. 8 Bluetooth Using the Bluetooth function ........52 Getting Started Hooking up the system....................14 Hooking up the TV.............................17 Setting the clock ................................19 Performing QUICK SETUP ...............20 Using the THEATRE SYNC function .................................................21 Disc Playing a disc .......................................23 Normal Play Using play mode ................................27 Searching/selecting a disc ..............31 Playing MP3/JPEG discs ...................34 Adjusting the delay between the picture and sound .............................39 A/V SYNC Restricting playback of the disc ....39 CUSTOM PARENTAL CONTROL, PARENTAL CONTROL Using the DVD setup menu............43 Tuner Listening to the radio .......................48 Sound Adjustment Adjusting the sound .........................58 Other operations Using the timer ...................................59 Changing the display .......................60 Viewing information about the disc .........................................................61 Hooking up optional components .........................................64 Additional Information Troubleshooting .................................66 Precautions ...........................................75 Specifi cations ......................................76 Guide to the Control Menu display ....................................................79 Language code list ............................82 Bluetooth wireless technology .....84 Playable Bluetooth devices ............85 Glossary .................................................86 Index ...............................................................89 4GB CMT-DH7BT.GB.3-097-195-11(1) Play Type DVD V VR mo VIDEO CD DATA DATA Th is sy 1) MP3 data. 2) JPEG File S Techn 3) A log Stand DVD tradem CMT-
.....52
.....58
.....59
.....60
.....61
.....64
.....66
.....75
.....76
.....79
.....82
.....84
.....85
.....86
......89 Playable discs Type DVD VIDEO DVD VIDEO Characteristics VR mode VIDEO CD CD DATA CD DATA DVD DVD-R*/-RW*/+R/+RW in DVD VIDEO format
* also in video mode DVD-R/-RW in VR (Video Recording) mode VIDEO CD Super VCD*
CD-ROM*/-R*/-RW*
* in VIDEO CD or Super VCD format AUDIO CD*
CD-R*/-RW*
* in AUDIO CD format CD-ROM/-R/-RW in DATA CD format, containing MP3 audio tracks1) and/or JPEG image fi les2), and conforming to ISO 96603) Level 1 or Level 2, or Joliet (expansion format). DVD-ROM/-R/-RW/+R/+RW in DATA DVD format containing MP3 audio tracks1) and/or JPEG image fi les2), and conforming to UDF (Universal Disk Format). Icon used in this manual Logo Th is system can also play back discs with the following disc logos:
1) MP3 (MPEG 1 Audio Layer 3) is a standard format defi ned by ISO/MPEG which compresses audio data. MP3 audio tracks must be in MPEG 1 Audio Layer 3 format. 2) JPEG image fi les must conform to the DCF image fi le format. (DCF Design rule for Camera File System: Image standards for digital cameras regulated by Japan Electronics and Information Technology Industries Association (JEITA)). 3) A logical format of fi les and folders on CD-ROMs, defi ned by ISO (International Organization for Standardization). DVD+RW, DVD-RW, DVD+R, DVD VIDEO, and the CD logos are trademarks. Continued 5GB CMT-DH7BT.GB.3-097-195-11(1) Discs that cannot be played Note on DualDiscs A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to Compact Disc (CD) standard, playback on this product is not guaranteed. Notes on CD-R/-RW and DVD-R/-RW/+R/+RW In some cases, CD-Rs/-RWs and DVD-Rs/-RWs/+Rs/+RWs cannot be played back on this system due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring soft ware. Th e disc will not be played back if it has not been correctly fi nalized. For more information, see the operation instructions for the recording device. Note that some playback functions may not work with some DVD+RWs/
+Rs, even if they have been correctly fi nalized. In this case, view the disc by normal playback. A disc created in Packet Write format cannot be played back. Note on playback operations of DVD VIDEOs and VIDEO CDs Some playback operations of DVD VIDEOs and VIDEO CDs may be intentionally set by soft ware producers. CD-ROMs recorded in PHOTO CD DATA CDs recorded in MP3 PRO format format Data part of CD-Extras1) Data part of Mixed CDs2) Super Audio CDs DVD Audio discs DVD-RAMs A DVD VIDEO with a diff erent region code. A disc that has a non-standard shape
(e.g., heart, square, star). A disc that has the adhesive cellophane tape or a sticker still left on it. 1) CD-Extra: Th is format records audio
(AUDIO CD data) on the tracks in session 1 and data on the tracks in session 2. 2) Mixed CD: Th is format records data on the fi rst track and audio (AUDIO CD data) on the second and subsequent tracks of a session. Region code of DVD VIDEOs you can play back on this system Your system has a region code printed on the back of the unit and will only play back DVD VIDEOs labeled with identical region code. DVD VIDEOs labeled ALL will also be played back on this system. If you try to play back any other region code DVD VIDEO, the message Playback prohibited by area limitations. will appear on the TV screen. Depending on the DVD VIDEO, no region code indication may be labeled even though playing the DVD VIDEO is prohibited by area restrictions. 6GB CMT-DH7BT.GB.3-097-195-11(1) Since t VIDEO the dis design not be instru VIDEO Mus copy Th is p discs t
(CD) s discs e techno record among do not may n Note Th is Sess
(or a the fi audi reco play If th AUD only back Th e Sess is a form syste the fi CD CMT-
duct al rial he m to back ot be o the dition of ng yed see ns RWs/
ctly sc by rmat s of cers. Since this system play back DVD VIDEOs and VIDEO CDs according to the disc contents the soft ware producers designed, some playback features may not be available. Also, refer to the instructions supplied with the DVD VIDEOs or VIDEO CDs. Music discs encoded with copyright protection technologies Th is product is designed to play back discs that conform to the Compact Disc
(CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. Notes on Multi Session disc Th is system can play back Multi Session discs when an MP3 audio track
(or a JPEG image fi le) is contained in the fi rst session. Any subsequent MP3 audio tracks (or JPEG image fi les) recorded in later sessions can also be played back. If the fi rst session is recorded in AUDIO CD or VIDEO CD format, only the fi rst session will be played back. Th e system will recognize a Multi Session disc as an AUDIO CD if there is a session recorded in AUDIO CD format on the disc. However, the system will only play back the disc if the fi rst session is recorded in AUDIO CD format. Copyrights Th is product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. Th is system incorporates Dolby*
Digital and the DTS** Digital Surround System.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
** Manufactured under license from Digital Th eater Systems, Inc. DTS and DTS Digital Surround are registered trademarks of Digital Th eater Systems, Inc. Th e Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Th omson. Th e XM name and related logos are registered trademarks of XM Satellite Radio Inc.
(c) 2006 SIRIUS Satellite Radio Inc. SIRIUS and the SIRIUS dog logo are registered trademarks of SIRIUS Satellite Radio Inc. 7GB CMT-DH7BT.GB.3-097-195-11(1) Guide to parts and controls Th is manual mainly explains operations using the remote, but the same operations can also be performed using the buttons on the unit having the same or similar names. Unit (HCD-DH7BT/Compact Disc Receiver) Front panel Top panel 8GB CMT-DH7BT.GB.3-097-195-11(1) Remo Unit:
79) Remo
(11) Press t Press t STAN Lights CMT-
Remote control (RM-SCD30) can Unit: (on/standby) (11, 69, 79) Remote: TV 2) (on/standby)
(11) Press to turn on the system. Press to turn on the TV. STANDBY indicator (71) Lights up when the system is turned off . CMT-DH7BT.GB.3-097-195-11(1) i G u d e t o p a r t s a n d c o n t r o l s BLUETOOTH indicator (60, 80) Lights up when the Bluetooth function is active. BLUETOOTH OPR (57) Press to make a connection, disconnection, or pairing with a Bluetooth device.
(eject) (59, 72) Press to eject the disc. Disc slot (73)
+/ (15, 19) Press to select an album. PRESET +/ (XX) Press to return the settings to the default setting.
/ (go backward/
forward) (19, 54) Press to select a track or fi le. Remote: TV CH +/2) (11) Press to change the TV channels. Remote: SLOW Press to watch the slow-motion play. Remote: TUNING +/ (51) Press to tune in the desired station.
/ (rewind/fast forward)
(34, 54) Press to fi nd a point in a track or fi le.
(34)
Continued 9GB AUDIO IN jack (55, 56, 68) Connect to an optional audio component. PHONES jack (55) Connect the headphones. DISPLAY (19) Press to display the disc information or clock in the front panel display. PROGRESSIVE (XX, XX) Press to change the output video format
(INTERLACE or PROGRESSIVE format). DSGX (XX) Press to select the sound eff ect. IR Receptor (52) Unit: DVD (play) (XX, XX) Press to select the DVD function. Press to start playback of a disc. Unit: BLUETOOTH (XX, XX) Press to select the Bluetooth function. Press to start playback of the music on the Bluetooth device (Bluetooth mobile phone, etc.). Unit: TUNER/BAND (XX, XX) Press to select the TUNER function. Press to switch among FM, AM, XM and SIRIUS band. Unit: AUDIO IN (XX, XX) Press to select the AUDIO IN function. FUNCTION +/ (14, 51, 54, 63, 70, 78) Press to select the function. Unit: REPEAT/FM MODE (XX, XX) Remote: FM MODE (53) Remote: REPEAT (25) Press to select FM reception mode
(monaural or stereo). Press to listen to a disc, a single track or fi le repeatedly.
(stop) (19, 39, 52, 54, 70, 81)
(pause) (19, 54) Press to stop or pause playback. Remote: 1) (play) (19, 42, 54, 56, 68, 70) Press to start playback. Remote: TV VOL +/1)2) (11) Press to adjust the TV volume. VOLUME +/1) (51, 69, 73, 79) Press to adjust the volume. DIMMER (20) Press to adjust the brightness of the display. PICTURE NAVI (29) Press to select the VIEWER format for searching the chapters, titles and tracks. Press to display the thumbnail pictures. 10GB CMT-DH7BT.GB.3-097-195-11(1) AUDI Press t on the SUBT Press t subtitl ANGL Press t with m DVD/
Press t TV scr Press t EQ (5 Press t DIS 92) Press t TV scr TV2) (
Press t ADVA Press t playba REPL Press t playba CMT-
i G u d e t o p a r t s a n d c o n t r o l s ion. 3, XX) ck or 1) 4,
) for acks. ures. AUDIO (29, 37, 63, 78) Press to display the current audio signal on the TV screen. SUBTITLE (38) Press to switch the language of the subtitle (DVD VIDEO). ANGLE (38) Press to change the angle (DVD VIDEO with multi-angles only). DVD/TUNER MENU (25, 51) Press to display the MENU items on the TV screen. Press to preset the radio station. EQ (57, 78) Press to adjust the sound level. DISPLAY (15, 21, 23, 39, 63, 75, 92) Press to display the Control Menu on the TV screen. TV2) (11) Press to operate the TV functions.
(20) ADVANCE Press to advance the current scene during playback. REPLAY Press to replay the previous scene during playback.
(20) STEP/ STEP (20) Press to play one frame at a time when playback is paused. RETURN (26) Press to return to the previous menu on the TV screen.
/// (14, 22, 39, 50, 58, 69, 84) Press to select the MENU items. ENTER (14, 19, 39, 50, 63, 69) Press to enter the settings. DVD TOP MENU (25) Press to display the DVD title on the TV screen. CLEAR (15, 48) Press to delete a pre-programmed track or fi le. Press to delete a SIRIUS Parental Lock password entry. Press to erase the pairing registration information of the Bluetooth device.
-/--2) (11) Press to change the entering mode for a single digit and double digit number. Numeric buttons1) (11, 19, 40, 53) Press to select a track, fi le or satellite channel. Press to enter a SIRIUS Parental Lock password. Press to enter a Bluetooth passcode. 10/02) Press to enter a double digit number. Continued 11GB CMT-DH7BT.GB.3-097-195-11(1) XM (XX, XX) Press to select XM band. SIRIUS (XX, XX) Press to select SIRIUS band. CATEGORY +/ (XX, XX) Press to select a satellite radio category. CATEGORY MODE (XX, XX) Press to select the tuning mode for XM or SIRIUS band. TIME/TEXT (73) Press to change the information in the front panel display. TV/VIDEO2) (11) Press to switch the input sources. SLEEP (53, 69) Press to set the Sleep Timer. TIMER MENU (14, 69) Press to set the clock and the timers. THEATRE SYNC (XX, XX) Press to register the input sources and functions. Press to activate the THEATRE SYNC function. Displa Ind Ind Lig Lig
(xx Lig
(62 Ind Lig Lig sel Lig is s 1) Th e numeric button 5, TV VOL +, VOLUME + and buttons have a tactile dot. Use the tactile dot as a reference when operating the system. 2) Th is button is used to operate a Sony TV. For details, see Operating a Sony TV on page 11. 12GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
Display i G u d e t o p a r t s a n d c o n t r o l s Indicates the selected function. (21) Indicates the selected play mode. (16) Lights up when timer is set. (56) Lights up when a station is tuned in.
(xx)
(62) Lights up when DSGX is turned on. Indicates the Playback status. (xx) Lights up when DTS is selected. (63) Lights up when Dolby Digital is Lights up when CATEGORY MODE selected. (xx) is selected. (xx) Lights up when P AUTO or P VIDEO is selected. (xx) Lights up when playing VIDEO CD Lights up when an MP3 disc is with PBC. (xx) loaded. (xx) Indicates the track/fi le information.
(xx) Lights up when chapter or title number is displayed. (xx) Indicates the type of disc being played back. (xx) Displays the text information. (xx) 13GB CMT-DH7BT.GB.3-097-195-11(1) Getting Started Hooking up the system Wall socket Right speaker Left speaker Wall socket SiriusConnect Home tuner (not supplied) Home indoor/outdoor antenna (not supplied)*
AC power adaptor (not supplied)*
DIN cable (not supplied)*
XM Mini-Tuner and Home Dock (not supplied) FM lead antenna (Extend it horizontally.) Connect white side. AM loop antenna
* Supplied with SiriusConnect Home tuner FM/AM antennas Find a location and an orientation that provide good reception, and then set up the antenna. Keep the antennas away from the speaker cords and the power cord to avoid picking up noise. 14GB CMT-DH7BT.GB.3-097-195-11(1) SI Conne When tuner w the AC tuner t Keep t antenn from t cord to XM Conne Dock. Satellit Sp Po Conne If the s not fi t the plu an ada Inse batt Note If you d of time damage CMT-
Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Attaching the speaker pads Attach the supplied speaker pads at each corner on the bottom of the speakers to stabilize the speakers and to prevent them from slipping. Front speaker of SS-CDH3 G e t t i n g S t a r t e d When carrying this system Perform the following procedure to protect the DVD mechanism. Use buttons on the unit for the operation. 1 Press / to turn on the system, then press DVD . 2 Make sure that no disc is loaded in the system and check that No Disc appears. 3 Press / to turn off the system and check that STANDBY disappears. 4 Unplug the power cord. Continued 15GB SIRIUS antenna Connect the SiriusConnect Home tuner. When you use the SiriusConnect Home tuner with this system, be sure to connect the AC power adaptor supplied with the tuner to a wall socket. Keep the SiriusConnect Home tuner, antenna, and AC power adaptor away from the speaker cords and the power cord to avoid picking up noise. XM antenna Connect the XM Mini-Tuner and Home Dock. For details, see To receive the XM Satellite Radio (page xx) Speakers Power Connect the power cord to a wall socket. If the supplied adaptor on the plug does not fi t your wall socket, detach it from the plug (only for models equipped with an adaptor). Inserting two R6 (size AA) batteries into the remote Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. CMT-DH7BT.GB.3-097-195-11(1) hat et up peaker Th ere are three places to fi nd your eight character XM Radio ID: on the XM Mini-Tuner, on the XM Mini-Tuner package, and on XM Channel 0. Record the Radio ID in the following eight squares for reference. Note: Th e XM Radio ID does not use the letters I, O, S or F. Activate your XM Satellite Radio service in the U.S. online at http://activate.xmradio.com or call 1-800-XM-RADIO (1-800-967-2346). You will need a major credit card. XM will send a signal from the satellites to activate the full channel lineup. Activation normally takes 10 to 15 minutes, but during peak busy periods you may need to keep your XM Ready home audio system on for up to an hour. When you can access the full channel lineup on your XM Ready home audio system you are done. Rece Rad SIRIU On Ra With ev music t talk and always Th e o musi musi heard Live p bigge week and o a wee over exclu Enter be fo of Ho Jeff F Maxi Espec her te Cosm Radio Worl Fox, weath Fami with Laug Receiving the XM Satellite Radio ABOUT XM SATELLITE RADIO XM off ers over 170 digital radio channels: the most commercial-free music channels, premier news, sports, talk, and traffi c and weather in 21 metro markets. XMs on-air hosts broadcast live from studios in Washington, D.C., New York City and Nashville. For more information or to subscribe in the US, visit xmradio.com or call Listener Care at 1-800-XMRADIO (1-800-967-2346). XM READY LEGAL XM monthly service subscription sold separately. XM Mini-Tuner and Home Dock required (each sold separately) to receive XM service. Installation costs and other fees and taxes, including a one-time activation fee may apply. Subscription fee is consumer only. All fees and programming subject to change. Channels with frequent explicit language are indicated with an XL. Channel blocking is available for XM radio receivers by calling 1-800-XMRADIO (1-800-967-2346). For a full listing of the XM commercial-free channels and advertising supported channels, visit lineup.xmradio.com. Subscriptions subject to Customer Agreement available at xmradio.com. XM service only available in the 48 contiguous United States. XM Satellite Radio and XM Ready are trademarks of XM Satellite Radio Inc. (C)2006 XM Satellite Radio Inc. All rights reserved. XM READY SUBSCRIPTIONS Once you have installed the XM Mini-Tuner Dock, inserted the XM Mini-Tuner, connected the XM Dock to your XM Ready home audio system, and installed the antenna, you are ready to subscribe and begin receiving XM programming. 16GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
the for e XM ou nd full es 10 ods ome n you ur XM Receiving the SIRIUS Satellite Radio SIRIUS Satellite Radio: The Best Radio On Radio With everything from 100% commercial-free music to in-depth sports coverage, plus news, talk and the hottest entertainment you can always hear exactly what you want. Th e only home of 100% commercial-free music. Whether youre discovering new music, or rediscovering songs you havent heard in years youll hear it all on SIRIUS. Live play-by-play and expert talk from the biggest leagues. NFL, every game, every week, everywhere. Plus NFL Radio 24/7 news and opinions from top NFL pros, 40 games a week from NBA and College Sports from over 150 schools. Plus NASCAR moving exclusively to SIRIUS in January 2007. Entertainment, Comedy and Talk that cant be found anywhere else. From 2 channels of Howard Stern, Blue Collar Comedy with Jeff Foxworthy and Larry the Cable Guy to Maxim and Playboy Radio. Especially for Women. Martha Stewart and her team will inspire you 24/7 along with Cosmo Radio, Deepak Chopra Wellness Radio and other exclusive talk show hosts. World Class News, traffi c and weather. Fox, CNN, NPR and BBC. Local traffi c and weather for the top 20 cities. Family & Kids: G-rated fun for everyone with Radio Disney, Discovery Kids Channel, Laugh Comedy and more. Hooking up the TV Connect the video input jack of your TV to the VIDEO OUT jack with the supplied video cord. G e t t i n g S t a r t e d When connecting a video deck Connect the video deck to the TV using a video cord (not supplied). However, do not connect this unit to the TV through the video deck. Otherwise, you may experience video leakage when watching video images from this system. Connect this unit directly to the TV as shown below. TV Video deck Unit Do not connect directly Continued 17GB CMT-DH7BT.GB.3-097-195-11(1) P VIDEO (PROGRESSIVE VIDEO):
Th e system fi xes the conversion method to PROGRESSIVE VIDEO for video-based soft ware. Select this if the image is not clear when you select P AUTO. About DVD VIDEO software types and the conversion method Th e DVD VIDEO soft ware can be divided into 2 types:
Film-based soft ware Film-based soft ware is derived from fi lm and displays the images at 24 frames per second. Video-based soft ware Video-based soft ware is derived from TV, such as dramas and sitcoms and displays images at 30 frames or 60 fi elds per second. Some DVD VIDEO contains both types of soft ware. In order for these images to appear in your TV naturally when the video output is in progressive format, the progressive signals need to be converted to match your DVD VIDEO soft ware. Note Th ere would be no image on your TV or the image is not clear if your setting does not match your TV or connection. Whe Turn o input s from t Opera You ca operat been m To Turn t or off Switch input s betwee and ot source Select chann Adjust volum speake
* For d and p
(For press Tip For higher quality video images:
Use the optional component video cords to connect the COMPONENT VIDEO input jacks on your TV to the COMPONENT VIDEO OUT jacks of this unit. If your TV is compatible with progressive format fi le signals, use this connection and press PROGRESSIVE on the unit repeatedly until P AUTO or P VIDEO appears in the display (page 16). You can use an optional S Video cord to connect the S VIDEO input jack on your TV to the S VIDEO OUT jack of this unit. Changing the format of the video signal output from COMPONENT VIDEO OUT jacks Progressive is a method for displaying TV images that reduces fl ickering and sharpens the image. To use this method, you need to connect to a TV that can accept progressive signals. You can output video signals from COMPONENT VIDEO OUT jacks in INTERLACE or PROGRESSIVE format. 1 Press FUNCTION +/
repeatedly to select DVD (or press DVD on the unit). 2 Press PROGRESSIVE on the unit repeatedly. Select P AUTO or P VIDEO if your TV accepts progressive signals and the TV is connected to the COMPONENT VIDEO OUT jacks. Otherwise, select INTERLACE. P AUTO (PROGRESSIVE AUTO):
Th e system automatically detects the soft ware type and selects the appropriate conversion method. 18GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
O):
EO ar and om 4 rom and 0 ypes es to he at, the erted re. the t When using a TV Turn on the TV and select the video input so that you can view the pictures from this system. Operating a Sony TV You can use the following buttons to operate a Sony TV. Th ese buttons have been marked in orange. To Turn the TV on or off Switch the TVs input source between the TV and other input sources Select the TV channels Adjust the volume of the TV speaker(s) Hold down TV and press TV /
TV/VIDEO TV CH +/
or numeric buttons *
TV VOL +/
* For double digit number, hold down TV and press -/-- , then press the number.
(For example, hold down TV , press -/-- , then 2 and 5 for entering 25.) G e t t i n g S t a r t e d Setting the clock Use buttons on the remote to set the clock. 1 Press / to turn on the system. 2 Press TIMER MENU . Th e hour indication fl ashes in the display. If PLAY SET? fl ashes in the display, press or repeatedly to select CLOCK SET?, then press ENTER . 3 Press or repeatedly to set the hour. 4 Press ENTER . Th e minute indication fl ashes in the display. 5 Press or repeatedly to set the minute. 6 Press ENTER . Th e clock starts functioning. Note Th e clock settings are canceled when you disconnect the power cord or if a power failure occurs. To display the clock when the system is off Press DISPLAY . Th e clock is displayed for about 8 seconds. Continued 19GB CMT-DH7BT.GB.3-097-195-11(1) To rec 1 Pre is st The scre 2 Pre sele ENT 3 Pre QU Note Th e gui the TV for the
(see pa Performing QUICK SETUP Before using the system, you can make the minimum basic adjustments in QUICK SETUP. If you do not want to perform QUICK SETUP, press CLEAR in step 3. Th e guide message will disappear from the TV screen. 1 Turn on your TV and select the video input. 2 Press / to turn on the system. Note Make sure there is no disc in the unit. Otherwise, the guide message does not appear. To perform QUICK SETUP, press on the unit to remove the disc. 3 Press FUNCTION +/
repeatedly to select DVD (or press DVD on the unit). Th e guide message appears at the bottom of the TV screen. 4 Press ENTER without inserting a disc. Th e LANGUAGE SETUP display appears on the TV screen. 5 Press or repeatedly to select a language, then press ENTER . Tips Th e selected language is for OSD, MENU and SUBTITLE . Th e selectable language is diff erent depending on the area. Th e setting is selected and the SCREEN SETUP display appears on the TV screen. 6 Press or repeatedly to select the setting that matches your TV type. If you have a 4:3 standard TV:
Select 4:3 LETTER BOX or 4:3 PAN SCAN (page 45) If you have a wide-screen TV or a 4:3 standard TV with wide-screen mode:
Select 16:9 (page 45) 7 Press ENTER . Th e setting is selected and the QUICK SETUP is complete. display appears on the TV screen. Th e system is ready for playback. If you want to change each setting individually, see Using the DVD setup menu on page 43. To quit QUICK SETUP Press DISPLAY . 20GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
to ss
, t ars on to hes
PAN or a reen isplay k. ng D G e t t i n g S t a r t e d Using the THEATRE SYNC function THEATRE SYNC allows you to turn on your Sony TV and this system, changes the systems function to DVD and then switches the TVs input source you have set with just one button. Preparing to use the THEATRE SYNC function Register the TVs input source connected to this system. Hold down SLEEP and press 0 1 to 8 9 CLEAR
To select the following TVs input source No input source
(Default) VIDEO 1 to VIDEO 8 COMPONENT 1 COMPONENT 2 COMPONENT 3 COMPONENT 4 Th e selected TVs input source is memorized into the remote. Continued 21GB To recall of QUICK SETUP settings 1 Press DISPLAY when playback is stopped. The Control Menu appears on the TV screen. 2 Press or repeatedly to
(SETUP), then press select ENTER . 3 Press or repeatedly to select QUICK, then press ENTER . Note Th e guide message appears at the bottom of the TV screen when you turn on the system for the fi rst time or aft er performing RESET
(see page 84). CMT-DH7BT.GB.3-097-195-11(1) Operating the THEATRE SYNC function Keep the remote pointed in the direction of the TV until the TV is turned on and the input source is changed correctly, then press THEATRE SYNC . If this function does not work, change the transmission time. Th e transmission time varies depending on the TV. To change the transmission time Hold down and press 1 2 3 4 5 6 7 8 To select the following transmission time 0.5 (Default) 1 1.5 2 2.5 3 3.5 4 22GB CMT-DH7BT.GB.3-097-195-11(1) Disc Playing a disc Normal Play Depending on the DVD VIDEO or VIDEO CD, some operations may be diff erent or restricted. Refer to the operating instructions supplied with the disc. Example: When playing a DVD VIDEO Notes Depending on the system status, the volume level may not appear on the TV screen. When you turn on the system, the disc is not pulled into the disc slot until No Disc appears in the display. Do not attempt to push in the disc until No Disc appears. Do not load an 8 cm disc with an adaptor. Doing so may cause the system to malfunction. When you remove a disc, handle the disc by its edge and pull it straight out of the disc slot. Do not touch the surface. D i s c Other operations Press To Stop playback . Pause playback . Press again Title number Elapsed playing time Select a track1), chapter or video fi le or to resume playback. or repeatedly during playback. Or, press the numeric buttons when the Control Menu is turned off , then press ENTER 2). Select an album3) Locate a point quickly in fast forward or fast reverse (Lock Search)4)5)
+/ repeatedly during playback or when playback is paused. or during playback. Each time you press or , the playback speed changes cyclically. To return to normal playback, press . Continued 23GB 1 Press FUNCTION +/
repeatedly to select DVD (or press DVD on the unit). 2 Insert a disc with the label side facing up. 3 Press . 4 Press VOLUME +/ to adjust the volume. CMT-DH7BT.GB.3-097-195-11(1) To Watch frame by frame (Slow-
motion Play)6) Play one frame at a time (Freeze Frame)6) Replay the previous scene Briefl y fast forward the current scene Switch to DVD function from another source Remove the disc or SLOW Press SLOW when playback is paused. Each time you press SLOW or SLOW
, the playback speed changes. To return to normal playback, press . STEP to go to the next frame when playback is paused. Press STEP 7) to go to the preceding frame when playback is paused. To return to normal playback, press . during REPLAY playback. (Instant Replay)7) ADVANCE during playback.
(Instant Advance)7) FUNCTION +/
repeatedly (or press DVD on the unit) (Automatic Source Selection). on the unit. 1) You cannot select an audio track during Lock Search operation of MP3 audio tracks. 2) DVD VIDEO, DVD-R/-RW in VR mode, VIDEO CD and AUDIO CD only. 3) MP3 audio tracks and JPEG image fi les only. 4) Except for JPEG image fi les. 5) Depending on the disc, the actual speed may 6) DVD VIDEO, DVD-R/-RW in VR mode, and VIDEO CD only. 7) DVD VIDEO and DVD-R/-RW in VR mode diff er. only. 24GB CMT-DH7BT.GB.3-097-195-11(1) Notes You cannot search for a still picture on a DVD-R/-RW in VR mode. You may not be able to use the Instant Replay or Instant Advance function in Repeat Play mode or with some scenes. Displaying multi-angles and subtitles Changing the angles
(DVD VIDEO only) You can change the viewing angle while playing a DVD VIDEO on which various angles (multi-angles) for a scene are recorded. Press ANGLE repeatedly during playback. Each time you press ANGLE , the angle changes. Note Depending on the DVD VIDEO, you may not be able to change the angle, even if multi-angles are recorded on the DVD VIDEO. Displaying the subtitles
(DVD VIDEO and DVD-R/-RW in VR mode only) You can turn the subtitles on or off while playing a DVD VIDEO or DVD-R/-
RW in VR mode on which subtitles are recorded. You can also change the language of the subtitles with DVD VIDEO, DVD-R/-RW in VR mode on which multilingual subtitles are recorded. Press S during SUBT change Note Depend not be multilin VIDEO subtitle Othe Chang When in mul the au VIDEO tracks When CD or the sou and lis chann speake track w and th you ca speake Press A playba want. Th e de When Depen option varies. When digits Langu the sam more t in mul CMT-
a Replay Play d while arious e ay not
-angles VR while
he on orded. Press SUBTITLE repeatedly during playback. Each time you press SUBTITLE , the subtitle language changes or turns off . Note Depending on the DVD VIDEO, you may not be able to change the subtitles even if multilingual subtitles are recorded on the DVD VIDEO. You also may not be able to turn the subtitles off . Other useful functions Changing the sound When playing a DVD VIDEO recorded in multiple audio formats, you can select the audio format you want. If the DVD VIDEO is recorded with multilingual tracks, you can also change the language. When playing a VIDEO CD, AUDIO CD or MP3 audio tracks, you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers. For example, when playing a track with the vocals on the right channel and the instruments on the left channel, you can hear the instruments from both speakers by selecting the left channel. Press AUDIO repeatedly during playback to select the audio signal you want. Th e default settings are underlined. When playing a DVD VIDEO:
Depending on the DVD VIDEO, the option of language and audio format varies. When a 4-digit number is displayed, the digits represent a language code (see Language code list on page 97). When the same language is displayed two or more times, the DVD VIDEO is recorded in multiple audio formats. Note that the CMT-DH7BT.GB.3-097-195-11(1) D i s c track 1. track 1. track 2. track 2. sound changes automatically depending on the disc. When playing a DVD-R/-RW in VR mode:
Th e number of audio tracks recorded on a disc are displayed. Example:
1: MAIN: the main sound of the audio 1: SUB: the sub sound of the audio 1: MAIN+SUB: the main and sub sound of the audio track 1. 2: MAIN*: the main sound of the audio 2: SUB*: the sub sound of the audio 2: MAIN+SUB*: the main and sub sound of the audio track 2.
* Th ese items do not appear if only one audio stream is recorded on the disc being played back. When playing a VIDEO CD, AUDIO CD, or MP3 audio track:
STEREO: the standard stereo sound. 1/L: the sound of the left channel 2/R: the sound of the right channel
(monaural).
(monaural). When playing a Super VCD:
1: STEREO: the stereo sound of the audio track 1. 1: 1/L: the sound of the left channel of the audio track 1 (monaural). 1: 2/R: the sound of the right channel of the audio track 1 (monaural). 2: STEREO: the stereo sound of the audio track 2. 2: 1/L: the sound of the left channel of the audio track 2 (monaural). 2: 2/R: the sound of the right channel of the audio track 2 (monaural). Continued 25GB Playing VIDEO CDs with PBC functions
(Version 2.0) PBC Playback
(VIDEO CD only) You can use the PBC (Playback Control) menus on your TV screen to enjoy the discs interactive soft ware. Th e menu format and structure may diff er depending on each disc. 1 Press to start playing a VIDEO CD with PBC functions (Version 2.0). Th e PBC menu appears on the TV screen. Depending on the VIDEO CD, the menu may not appear. 2 Press the numeric buttons to select the item number you want. 3 Press ENTER . Depending on the VIDEO CD, Press ENTER may appear as Press SELECT in the operating instructions supplied with the disc. In this case, press . 4 Continue playback according to the instructions on the menus. Refer to the operating instructions supplied with the VIDEO CD, as the operating procedure may diff er depending on the VIDEO CD. To return to the previous menu Press RETURN . Note PBC playback is canceled when Shuffl e Play, Program Play or Repeat Play is activated. To cancel playback with PBC functions 1 Press or repeatedly or press the numeric buttons to select a track when playback is stopped. 2 Press or ENTER . Playback starts from the selected track. Still images, such as the menu screens, will not be shown. To return to PBC playback, press twice, then press . Resuming playback from the point you stopped the disc Resume Play Th is system memorizes the point where you stopped the disc so you can resume playback from that point. Resume Play is not canceled when you turn off the system except for MP3 audio tracks and JPEG image fi les. 1 While playing a disc, press to stop playback. Resume appears in the display. 2 Press . Th e system starts playback from the point you stopped the disc in step 1. Depe the sy the ex If M Resu VIDE disc o Tip To play press Resum stopp
(DVD Th is sy you sto for up when y you sto 41st di the fi r To act DISC to ON Note If MU system such as point fo Notes You cannot perform Resume Play during Shuffl e Play or Program Play. Th is function may not work properly with some discs. Resume Play is canceled when you press when playback is stopped. you eject the disc. you change the function. you change the settings in the Setup Menu. 26GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
y is track. reens, nt you here ume Play he and to the p 1. ng with opped. p Using play mode Creating your own program Program Play You can make a program of up to 99 steps in the order you want them to be played back. You can only program the tracks from the current disc. 1 Press Th e Control Menu appears on the TV screen. DISPLAY . D i s c 2 Press or repeatedly to
(PROGRAM), then select press ENTER . Th e options for PROGRAM appear on the TV screen. 3 Press or repeatedly to select SET, then press ENTER . Tracks number Continued 27GB Depending on where you stopped the disc, the system may not resume playback from the exact same point. If MULTI-DISC RESUME is set to ON, Resume Play is not canceled for DVD VIDEO and VIDEO CD when you eject the disc or change the function. Tip To play back from the beginning of the disc, press twice, then press . Resuming playback of a disc that was stopped Multi-disc Resume
(DVD VIDEO and VIDEO CD only) Th is system can store the point where you stopped the playback of the disc for up to 40 discs and resumes playback when you insert the same disc again. If you store a playback resume point for the 41st disc, the playback resume point for the fi rst disc will be deleted. To activate this function, set MULTI-
DISC RESUME in CUSTOM SETUP to ON (page 47). Note If MULTI-DISC RESUME is set to ON, the system may play back the next recorded disc such as a DVD-RW from the playback resume point for the current recorded disc. CMT-DH7BT.GB.3-097-195-11(1) 4 Press . Th e cursor moves to the track row T (in this case, 01). To change a programmed step:
Press or repeatedly to select the programmed step number you want to change. Th en, press . To delete a programmed step:
Press or repeatedly to select the programmed step number you want to change. Th en, press CLEAR . To delete all of the programmed steps in the program list:
Press to select ALL CLEAR. Th en, press ENTER . 5 Select the track you want to program. For example, select track 02. Press or repeatedly to select 02 under T, then press ENTER . Selected track 6 To program other tracks, repeat steps 4 to 5. 7 Press . Program Play starts. When the Program Play ends, you can restart the same program by pressing . To cancel Program Play Press CLEAR or select OFF in step 3. To play back the same program again, select ON in step 3 and press ENTER or . To turn off the Control Menu Press DISPLAY repeatedly until the Control Menu disappears from the TV screen. Notes When Program Play is activated, the REPEAT setting is automatically changed to ON if the current setting is DISC or TRACK. You cannot perform Program Play with VIDEO CDs during PBC playback. Tip Th e Program Play is canceled and the program list is cleared when you eject the disc. you turn off the system. you change the function. Play Sh You ca curren you pe order Shuffl e tracks 1 Pre pla Th scr 2 Pre se pr Th on 3 Pre se Wh AU T d Wh O p Wh O s i W a Total time of the programmed tracks 28GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
peat ou y am ss ntil the nged or h ogram Playing in random order Shuffl e Play You can play back the tracks on the current disc in random order. Each time you perform Shuffl e Play, the playing order may diff ers. Shuffl e Play is only available for the tracks on the current disc. 1 Press DISPLAY during playback. Th e Control Menu appears on the TV screen. 2 Press or repeatedly to
(SHUFFLE), then select press ENTER . Th e options for SHUFFLE appear on the TV screen. 3 Press or repeatedly to select the setting you want. When playing a VIDEO CD or AUDIO CD:
TRACK: all tracks on the current disc is played back randomly. When Program Play is activated:
ON: all tracks in the program list is played back randomly. When playing a DATA CD/DVD:
ON: all MP3 audio tracks in the selected album on the current disc is played back randomly. When no album is selected, the fi rst album is played back randomly. CMT-DH7BT.GB.3-097-195-11(1) 4 Press ENTER . Shuffl e Play starts. To cancel Shuffl e Play, press CLEAR or select OFF in step 3. To turn off the Control Menu Press DISPLAY repeatedly until the Control Menu disappears from the TV screen. D i s c Notes Shuffl e Play is canceled when you eject the disc. you turn off the system. you change the function. you perform Track/Index Search. You cannot perform Shuffl e Play with VIDEO CDs during PBC playback. Th e same song may be played back repeatedly for MP3 audio tracks. Playing repeatedly Repeat Play You can play back all the titles, tracks, fi les or a single title, chapter, track or fi le on a disc repeatedly. You can select Shuffl e Play and Program Play at the same time. 1 Press Th e Control Menu appears on the TV screen. DISPLAY . Continued 29GB Notes You can also change the Repeat Play setting by pressing REPEAT repeatedly. REP lights up in the display when Repeat Play is set to DISC, ALBUM or ON. REP1 lights up in the display when Repeat Play is set to TITLE, CHAPTER, TRACK or FILE. Depending on the DVD VIDEO, you cannot perform Repeat Play. You cannot perform Repeat Play with VIDEO CDs during PBC playback. When playing a DATA CD/DVD which contains MP3 audio tracks and JPEG image fi les, the audio sound will not match the image if their playing time are diff erent. You cannot select TRACK when MODE
(MP3, JPEG) is set to IMAGE (JPEG)
(page36). Repeat Play is canceled when you eject the disc. you turn off the system. you change the function. 2 Press or repeatedly to
(REPEAT), then select press ENTER . Th e options for REPEAT appear on the TV screen. 3 Press or repeatedly to select the setting you want. OFF (default setting) DISC TITLE (DVD VIDEO or DVD-
R/-RW in VR mode) CHAPTER (DVD VIDEO or DVD-
R/-RW in VR mode) TRACK1) (AUDIO CD, VIDEO CD, DATA CD/DVD2)) ALBUM (DATA CD/DVD) ON (Shuffl e Play or Program Play). 4 Press ENTER . Repeat Play starts. To cancel Repeat Play, press CLEAR or select OFF in step 3. 1) You cannot select TRACK when MODE
(MP3, JPEG) is set to IMAGE (JPEG). 2) MP3 audio tracks only. To turn off the Control Menu DISPLAY repeatedly until Press the Control Menu disappears from the TV screen. 30GB CMT-DH7BT.GB.3-097-195-11(1) Sea disc Play men Some you en play b menus Using A DVD of pict When which select MENU Using Some the dis you pl can se the sub sound 1 Pre DV Th Th dep 2 Pre or se to 3 Pre CMT-
tting epeat N. TER, cannot h mage he t. ODE
) Searching/selecting a disc Selecting ORIGINAL or PLAY LIST on a DVD-R/-RW in VR mode Th is function is only available for DVD-
Rs/-RWs in VR mode with a playlist created. 1 Press DISPLAY when playback is stopped. Th e Control Menu appears on the TV screen. D i s c 2 Press or repeatedly to
(ORIGINAL/PLAY select LIST), then press ENTER . Th e options for ORIGINAL/PLAY LIST appear on the TV screen. 3 Press or repeatedly to select the setting you want. PLAY LIST: play back according to the playlist created on the disc. ORIGINAL: play back according to the originally recorded sequence. 4 Press ENTER . Continued 31GB Playing DVD VIDEOs using the menu Some DVD VIDEOs have menus to help you enjoy the DVD VIDEOs. You can play back DVD VIDEOs using these menus on the TV screen. Using DVD TOP MENU A DVD VIDEO contains a lot of sections of picture or music feature called title. When you play back a DVD VIDEO which contains several titles, you can select the title you want using DVD TOP MENU. Using DVD MENU Some DVD VIDEOs allow you to select the disc contents using a menu. When you play back these DVD VIDEOs, you can select items such as the language for the subtitles and the language for the sound using MENU. 1 Press DVD TOP MENU or DVD/TUNER MENU . Th e menu appears on the TV screen. Th e contents of the menu vary depending on the disc. 2 Press and or and or the numeric buttons to select the title or item you want to play back. 3 Press ENTER . CMT-DH7BT.GB.3-097-195-11(1) Using the on-screen display to search for a title/chapter/
scene/track/index/album/fi le You can search by diff erent information recorded on a disc, such as title, track, and album. Each item is assigned a unique number on the disc, and you can select the numbered item you want from the Control Menu. You can also search for a particular point using the time code
(Time Search) (DVD VIDEO and DVD-
R/-RW in VR mode only). 1 Press DISPLAY . (When playing a DATA CD/DVD with JPEG image fi les, press DISPLAY twice.) Th e Control Menu appears on the TV screen. 2 Select the search item (/ ). Example: when you select
(CHAPTER)
** (**) is selected (** refers to a number). Th e number in parentheses indicates the total number of titles, chapters, tracks, indexes, scenes, albums or fi les. Selected row 3 Press ENTER .
** (**) change to (**). 32GB 4 Select the title, track, album, etc. or fi le number (/ or numeric buttons ). If you make a mistake, press CLEAR to cancel the number. 5 Press ENTER . Th e system starts playback from the selected title, track, album, etc. To turn off the Control Menu Press DISPLAY repeatedly. Tip When the Control Menu display is turned off , you can search for a chapter (DVD VIDEO and DVD-R/-RW in VR mode) or track (AUDIO CD and VIDEO CD) by pressing the numeric buttons and ENTER . To search for a particular point using the time code Time Search
(DVD VIDEO and DVD-R/-RW in VR mode only) 1 Press 2 Press or repeatedly to select DISPLAY .
(TIME/TEXT). T **:**:** (elapsed playing time of the current title) is selected. 3 Press ENTER . T **:**:** changes to T--:--:--. 4 Input the time code using the numeric buttons , then press ENTER . For example, to fi nd the scene at 2 hours, 10 minutes, and 20 seconds aft er the beginning, enter 2:10:20. If you make a mistake, press CLEAR to cancel the number. Note Depending on the disc, you cannot perform Time Search. Sear Pic 1 Pre rep fo C V T T S 2 Pre Th titl mo the 3 Pre ch EN Th sel To can Press R CMT-DH7BT.GB.3-097-195-11(1) CMT-
m, or r. the d off , EO and DIO meric sing VR lect e of
. 2 ds 0. orm Note Depending on the disc, you may not be able to select some items. Tip To display the remaining chapters, titles, or tracks, select a scene at the bottom row and press . To return to the previous scene, select a scene at the top row and press . D i s c 33GB Searching by scene Picture Navigation 1 Press PICTURE NAVI repeatedly to select the VIEWER format you want to search in. CHAPTER VIEWER (DVD VIDEO) TITLE VIEWER (DVD VIDEO) TRACK VIEWER (VIDEO CD or Super VCD) 2 Press ENTER . Th e fi rst scene of the fi rst 9 chapters, titles or tracks appears. If there are more than 9 chapters, titles, or tracks, appears at the bottom right of the screen. 3 Press /// to select a chapter, title or track, then press ENTER . Th e system starts playing from the selected scene. To cancel searching Press RETURN or DISPLAY . CMT-DH7BT.GB.3-097-195-11(1) Playing MP3/JPEG discs Notes Depending on the soft ware you use to create the DATA CD or DATA DVD, the playback order may diff er. Th e playback order above may not be applicable if there are more than 200 albums and 300 tracks/fi les in each album. Th e system can play back up to 200 albums, including albums that do not contain MP3 audio tracks and JPEG image fi les. Th e system will not play back any albums beyond the 200th album. Th e maximum number of MP3 audio tracks or JPEG image fi les on an album which this system can recognize is:
600 when MODE (MP3, JPEG) is set to AUDIO (MP3) or IMAGE (JPEG). 300 when MODE (MP3, JPEG) is set to AUTO. Th e system can play back MP3 audio tracks and JPEG image fi les. Th e system will play back any data with the extension .MP3,
.JPG or .JPEG even if they are not in MP3 or JPEG format. Playing this data may generate a loud noise which could damage your speaker system. Depending on the encoding/writing soft ware, recording device, or the recording media used to record an MP3 audio track, you may encounter problems such as cannot play back, sound interruptions and noise. Th e following discs/situations can increase the time it takes to start playback:
a disc recorded with a complicated tree structure. a disc recorded in Multi Session. a disc to which data can be added (non-
fi nalized disc). when the tracks or fi les in another album have just been played back. Some CD-Rs/-RWs or DVD-Rs/-RWs/+Rs/
+RWs cannot be played back on the system depending on the fi le format. When playing a DATA CD or DATA DVD containing both MP3 audio tracks and JPEG image fi les, select MODE (MP3, JPEG) from the Control Menu aft er the discs TOC reading is complete. If you want to play back both MP3 audio tracks and JPEG image fi les, set MODE (MP3, JPEG) to AUTO. MP3 audio tracks only, set MODE (MP3, JPEG) to AUDIO (MP3). JPEG image fi les only, set MODE (MP3, JPEG) to IMAGE (JPEG). Th e system can play back to a depth of 8 folders only. Sele or a 1 Ins Th 2 Pre se Pla Pre Th fi rs Pla 1 2 34GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
ease tree non-
album
/+Rs/
stem DVD JPEG G) TOC y back mage
(MP3, MP3, 8 D i s c To display the next or previous page of track list or album list Press or repeatedly when the track list or album list is displayed. To play back the next album of MP3 audio tracks You can select the next album by pressing repeatedly until the last track of the current album, then press once. Th e fi rst track of the next album is selected. However, you cannot select the previous album by pressing repeatedly. To select the previous album, select the album from the album list. To return to the album list display when the track list is displayed Press RETURN . To turn on or off the display of album list or track list Press DVD/TUNER MENU repeatedly. Selecting a JPEG image fi le or album 1 Insert a disc in the disc slot. Th e list of albums appears on the TV screen. 2 Press or repeatedly to select an album. Playing an album:
Press . Th e system starts a slide show from the fi rst image fi le of the selected album. Continued 35GB Selecting an MP3 audio track or album 1 Insert a disc in the disc slot. Th e list of albums appears. 2 Press or repeatedly to select an album. Playing an album:
Press . Th e system starts playback from the fi rst track of the selected album. Playing a track:
1 Press ENTER . Th e list of MP3 audio tracks of the selected album appears. 2 Press or repeatedly to select the MP3 audio track you want, then press ENTER . Th e system starts playing the selected MP3 audio track. CMT-DH7BT.GB.3-097-195-11(1) Playing an image fi le:
1 Press PICTURE NAVI . Th umbnail picture for the fi rst 16 JPEG image fi les in the selected album is displayed. If there are more than 16 image fi les in the selected album, the scroll bar appears at the right. 2 Press /// to select the image you want to view, then press . Th e slide show starts from the selected image fi le. To play back the next album of JPEG image fi les You can select the next album by pressing repeatedly until the last fi le of the current album, then press once. Th e fi rst fi le of the next album is selected. However, you cannot select the previous album by pressing repeatedly. To select the previous album, select the album from the album list. To turn on or off the display of album list Press DVD/TUNER MENU repeatedly. To rotate a JPEG image fi le When a JPEG image fi le is displayed on the TV screen, you can rotate the image by 90 degrees. Press or repeatedly while viewing an image. Press CLEAR to return to the original view. Notes Th e PICTURE NAVI button does not work when MODE (MP3, JPEG) is set to AUDIO (MP3). When you press or to select the next or previous image, the image will return to its original view even if you have rotated the image previously. Th e slide show stops when you press or
. To display the next or previous page of album list Press or repeatedly when the album list is displayed. To display the next or previous JPEG image fi le Press or repeatedly during the slide show. 36GB Play JPEG show You ca sound fi les an album 1 Ins Th scr 2 Pre Th scr 3 Pre se JP Th JPE A b a s A a I i 4 Pre to EN 5 Pre Th scr CMT-DH7BT.GB.3-097-195-11(1) CMT-
EG essing the e. ected. vious To e bum d on mage ewing iginal ot et to e next n to ed the or Playing MP3 audio tracks and JPEG image fi les as a slide show with sound You can play back a slide show with sound by fi rst placing both JPEG image fi les and MP3 audio tracks in the same album on a DATA CD/DVD. 1 Insert a disc in the disc slot. Th e list of albums appears on the TV screen. 2 Press Th e Control Menu appears on the TV screen. DISPLAY . 3 Press or repeatedly to select
(MODE (MP3, JPEG)), then press ENTER . Th e options for MODE (MP3, JPEG) appear on the TV screen. AUTO: (default setting) Play back both JPEG image fi les and MP3 audio tracks in the same album as a slide show with sound. AUDIO (MP3): Play back MP3 audio tracks continuously. IMAGE (JPEG): Play back JPEG image fi les as a slide show. 4 Press or repeatedly to select AUTO, then press ENTER . 5 Press DVD/TUNER MENU . Th e list of albums appears on the TV screen. CMT-DH7BT.GB.3-097-195-11(1) 6 Press or repeatedly to select the album you want, then press . Th e slide show with sound starts from the selected album. To turn on or off the display of album list Press DVD/TUNER MENU repeatedly. To cancel slide show with sound Select AUDIO (MP3) or IMAGE
(JPEG) in step 4. D i s c Notes In some cases, you cannot change the MODE (MP3, JPEG) setting when MODE
(MP3, JPEG) has been set to IMAGE (JPEG) and the selected disc only contains MP3 audio tracks. AUDIO (MP3) and the selected disc only contains JPEG image fi les. Th e maximum number of MP3 audio tracks or JPEG image fi les on an album which this system can recognize is:
600 when MODE (MP3, JPEG) is set to AUDIO (MP3) or IMAGE (JPEG). 300 when MODE (MP3, JPEG) is set to AUTO. If there are no MP3 audio tracks in the disc, No audio data appears on the TV screen and the disc cannot be played back. If there are no JPEG image fi les in the disc, No image data appears on the TV screen and the disc cannot be played back. If you play back a large data size of MP3 audio tracks and JPEG image fi les at the same time, the sound may skip. Continued 37GB 3 Press or repeatedly to select the setting you want. MODE 1: (default setting) Th e image sweeps in from top to bottom of the screen. MODE 2: Th e image sweeps in from left to right of the screen. MODE 3: Th e image stretches out from the center of the screen. MODE 4: Th e images randomly cycle through the eff ects. MODE 5: Th e next image slides over the current image. OFF: Turns off this function. 4 Press ENTER . Th e selected setting takes eff ect. Specifying the slide show speed
(JPEG image fi les only) 1 Press DISPLAY repeatedly until the Control Menu for JPEG image fi les appears on the TV screen. 2 Press or repeatedly to select
(INTERVAL), then press ENTER . Th e options for INTERVAL appear on the TV screen. 3 Press or repeatedly to select the transition interval you want. Th e intervals become longer in the order from FAST, NORMAL
(default setting), SLOW 1, to SLOW 2. 4 Press ENTER . Th e selected setting takes eff ect. Note Some JPEG image fi les (especially progressive JPEG image fi les or JPEG image fi les with 3,000,000 pixels or more) may take a longer time to display than others, which may make the transitions seem longer than that of the option you selected. Selecting a transition eff ect for image fi les in the slide show
(JPEG image fi les only) 1 Press DISPLAY repeatedly until the Control Menu for JPEG image fi les appears on the TV screen. 2 Press or repeatedly to select
(EFFECT), then press ENTER . Th e options for EFFECT appear on the TV screen. Adju betw and A/V When with th adjust sound A/V SY tracks CD/D 1 Pre pla Th scr 2 Pre se pr Th on 3 Pre se O a O p 4 Pre Note Depend may no 38GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
lect e n n. out mly es Adjusting the delay between the picture and sound A/V SYNC When the sound does not synchronize with the pictures on the screen, you can adjust the delay between the picture and sound. A/V SYNC does not work for MP3 audio tracks and JPEG image fi les in DATA CD/DVD. 1 Press DISPLAY when playback is stopped. Th e Control Menu appears on the TV screen. 2 Press or repeatedly to
(A/V SYNC), then select press ENTER . Th e options for A/V SYNC appear on the TV screen. 3 Press or repeatedly to select the setting you want. OFF: (default setting) Does not adjust. ON: Adjusts the diff erence between picture and sound. 4 Press ENTER . Note Depending on the input stream, this function may not be eff ective. Restricting playback of the disc CUSTOM PARENTAL CONTROL, PARENTAL CONTROL You can set 2 kinds of playback restrictions for the disc you want. Custom Parental Control You can set playback restrictions so that the system will not play back inappropriate discs. Parental Control You can limit the playback of some DVD VIDEOs according to a predetermined level such as the age of the users. When a limited scene is played back, that scene may be skipped or replaced with diff erent scenes. Th e same password is used for both Custom Parental Control and Parental Control. Preventing playback of specifi c discs CUSTOM PARENTAL CONTROL You can set the same Custom Parental Control password for up to 40 discs. When you set the 41st-disc, the playback restriction for the fi rst disc is canceled. 1 Insert the disc you want to set the playback restriction. If the disc is playing, press to stop playback. 2 Press DISPLAY when playback is stopped. Th e Control Menu appears on the TV screen. Continued D i s c 39GB CMT-DH7BT.GB.3-097-195-11(1) 3 Press or repeatedly
(PARENTAL to select CONTROL), then press ENTER . Th e options for PARENTAL CONTROL appear on the TV screen. 4 Press or repeatedly to select ON , then press ENTER . To turn off the Custom Parental Control function, select OFF , then press ENTER . If you have not entered a password:
Th e display for registering a new password appears. If you make a mistake when entering your password Press repeatedly to delete the number you have entered, then re-enter your password again. To play back a disc for which Custom Parental Control is set 1 Insert the disc for which Custom Parental Control is set. Th e CUSTOM PARENTAL CONTROL display appears. 2 Enter your 4-digit password using the numeric buttons , then press ENTER . Th e system is ready for playback. Tip If you forget your password, enter the 6-
digit number 199703 using the numeric buttons when the CUSTOM PARENTAL CONTROL display asks you for your password, then press ENTER . Th e display will ask you to enter a new 4-digit password. Enter a 4-digit password using the numeric buttons , then press ENTER . Th e display for confi rming the password appears on the TV screen. When you have already registered a password:
Th e display for entering the password appears on the TV screen. 5 Enter or re-enter your 4-digit password using the numeric buttons , then press ENTER . Custom parental control is set. appears on the TV screen and the screen returns to the Control Menu. 40GB Lim PA
(DVD You ca VIDEO level s 1 Pre pla Th scr 2 Pre to CO Th CO 3 Pre se EN If y pa Th pa En nu EN Th pa Wh a p Th app CMT-DH7BT.GB.3-097-195-11(1) CMT-
ring nter om m ng ress c NTAL splay ord. 4 Enter or re-enter your 4-digit password using the numeric buttons , then press ENTER . Th e display for setting the playback limitation level appears. D i s c 5 Press or repeatedly to select STANDARD, then press ENTER . Th e options for STANDARD appear on the TV screen. 6 Press or repeatedly to select a geographic area as the playback limitation level, then press ENTER . Th e area is selected. When you select OTHERS , enter the area code for the geographic area you want according to the Parental Control Area Code List on page 43 by using the numeric buttons . 7 Press or repeatedly to select LEVEL, then press ENTER . Th e options for LEVEL appear on the TV screen. Continued 41GB Limiting playback for children PARENTAL CONTROL
(DVD VIDEO only) You can limit the playback of some DVD VIDEOs according to a predetermined level such as the age of the users. 1 Press DISPLAY when playback is stopped. Th e Control Menu appears on the TV screen. 2 Press or repeatedly
(PARENTAL to select CONTROL), then press ENTER . Th e options for PARENTAL CONTROL appear on the TV screen. 3 Press or repeatedly to select PLAYER , then press ENTER . If you have not entered a password:
Th e display for registering a new password appears. Enter a 4-digit password using the numeric buttons , then press ENTER . Th e display for confi rming the password appears on the TV screen. When you have already registered a password:
Th e display for entering the password appears on the TV screen. CMT-DH7BT.GB.3-097-195-11(1) 8 Press or repeatedly to select the level you want, then press ENTER . Parental Control setting is completed. Th e lower the value, the stricter the limitation. To turn off the Parental Control function, set LEVEL to OFF. If you make a mistake when entering your password Press repeatedly to delete the number you have entered, then re-enter your password again. To play back a disc for which Parental Control is set 1 Insert the disc and press . Th e display for entering your password appears on the TV screen. 2 Enter your 4-digit password using the numeric buttons , then press ENTER . Th e system starts playback. Notes Th e Control Menu display will show diff erent items depending on the disc type. When you play back DVD VIDEOs which do not have the Parental Control function, playback cannot be limited on this system. Depending on the DVD VIDEO, you may be asked to change the parental control level while playing the disc. In this case, enter your password, then change the level. If Resume Play is canceled, the level returns to the original level. 5 En us th 6 To re-
bu EN If you your p Press numbe your p Tip If you forget your password, remove the disc and repeat steps 1 to 3 of Limiting playback for children. When you are asked to enter your password, enter 199703 using the numeric buttons , then press ENTER . Th e display will ask you to enter a new 4-digit password. Aft er you enter a new 4-digit password, reinsert the disc and press . When the display for entering your password appears, enter your new password. Changing the password 1 Press DISPLAY when playback is stopped. Th e Control Menu appears on the TV screen. 2 Press or repeatedly
(PARENTAL to select CONTROL), then press ENTER . Th e options for PARENTAL CONTROL appear on the TV screen. 3 Press or repeatedly to select PASSWORD , then press ENTER . Th e display for entering the password appears on the TV screen. 4 Enter your 4-digit password using the numeric buttons , then press ENTER . 42GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
5 Enter a new 4-digit password using the numeric buttons , then press ENTER . 6 To confi rm your password, re-enter it using the numeric buttons , then press ENTER . If you make a mistake when entering your password Press repeatedly to delete the number you have entered, then re-enter your password again. disc back er your eric isplay ord. reinsert play r your he TV L ER . creen. to n sword d
, D i s c Using the DVD setup menu By using the DVD setup menu, you can make various adjustments to items such as picture and sound. Note Playback settings stored in the disc take priority over the DVD setup menu settings. Th erefore, some of the DVD setup menu settings may not be performed. 1 Press DISPLAY when playback is stopped. Th e Control Menu appears on the TV screen. 2 Press or repeatedly to
(SETUP), then select press ENTER . Th e options for SETUP appear on the TV screen. 3 Press or repeatedly to select CUSTOM, then press ENTER . Th e Setup menu appears on the TV screen. Continued 43GB CMT-DH7BT.GB.3-097-195-11(1) 4 Press or repeatedly to select the setup item from the displayed list: LANGUAGE SETUP, SCREEN SETUP or CUSTOM SETUP. Then press ENTER . Th e setup item is selected. Example: SCREEN SETUP Selected item 6 Press or repeatedly to select the setting you want, then press ENTER . Th e setting is selected and setup is completed. Selected setting Setup items 5 Press or repeatedly to select the item you want, then press ENTER . Th e options for the selected item appear on the TV screen. Example: TV TYPE DVD setup menu item list Th e default settings are underlined. Setting the language LANGUAGE SETUP Set various languages for the on-screen display or sound track. Options OSD
(On-Screen Display) Switches the language of the on-screen display. MENU*
(DVD VIDEO only) Select the language for the DVD menu. AUDIO*
(DVD VIDEO only) Switches the language of the sound track. When you select ORIGINAL, the language given priority in the disc is selected. 44GB CMT-DH7BT.GB.3-097-195-11(1) SUBTI
(DVD langua When the lan accord for the
* When SUB recor recor Howe langu If you SUB code using Settin Choos you co TV TY
(DVD 16:9: S wide-s mode 4:3 LE conne display upper 4:3 PA conne display screen not fi t CMT-
to
, is GE een uage s D i s c SCREEN SAVER Th e screen saver will help prevent your display device from becoming damaged
(ghosting). Press to turn off the screen saver. ON: Th e screen saver image appears when playback is stopped or paused for 15 minutes or when you play back an AUDIO CD or MP3 audio tracks for more than 15 minutes. OFF BACKGROUND Selects the background color or picture to be displayed on the TV screen. Th e background color or picture is displayed when playback is stopped or while playing an AUDIO CD and MP3 audio tracks. JACKET PICTURE: Th e jacket picture
(still picture) appears in the background, but only when the jacket picture is already recorded on the disc (DVD VIDEO, CD-EXTRA, etc.). If the disc does not contain a jacket picture, the GRAPHICS picture appears. GRAPHICS: A preset picture stored in the system appears in the background. BLUE BLACK BLACK LEVEL Select the black level (setup level) for the video signals output from the video jacks other than COMPONENT VIDEO OUT jacks. ON: Standard level OFF: Lower the standard black level. Use this when the picture becomes too white. Continued 45GB SUBTITLE*
(DVD VIDEO only) Switches the language of the subtitle . When you select AUDIO FOLLOW, the language for the subtitles changes according to the language you selected for the sound track.
* When you select a language in MENU, SUBTITLE, or AUDIO that is not recorded on the DVD VIDEO, one of the recorded language is automatically selected. However, depending on the disc, the language may not be selected automatically. If you select OTHERS in MENU, SUBTITLE, and AUDIO, enter a language code from the Language code list (page 97) using the numeric buttons . Setting the TV screen SCREEN SETUP Choose the settings according to the TV you connected. TV TYPE1)
(DVD VIDEO only) 16:9: Select this when you connect a wide-screen TV or a TV with a wide mode function. 4:3 LETTER BOX: Select this when you connect a 4:3 screen TV. Th is setting displays a wide picture with bands on the upper and lower portions of the screen. 4:3 PAN SCAN2): Select this when you connect a 4:3 screen TV. Th is setting displays the wide picture on the entire screen and cuts off the portions that do not fi t. CMT-DH7BT.GB.3-097-195-11(1) BLACK LEVEL (COMPONENT OUT) Select the black level (setup level) for the video signals output from the COMPONENT VIDEO OUT jacks. You cannot select BLACK LEVEL
(COMPONENT OUT) when the system outputs progressive signal. OFF: Standard level ON: Raise the standard black level. Use this when the picture becomes too black. 4:3 OUTPUT3) Change this setting to watch 4:3 aspect ratio progressive signals. If you can change the aspect ratio on your progressive format (525p/625p) compatible TV, change the setting on your TV. FULL: Select this when you can change the aspect ratio on your TV. NORMAL: Select this when you cannot change the aspect ratio on your TV. Shows a 16:9 aspect ratio signal with black bands on left and right sides of the image. 16:9 aspect ratio TV 1) Th e default setting varies depending on the country. 16:9 4:3 LETTER BOX 4:3 PAN SCAN 2) Depending on the DVD VIDEO, 4:3 LETTER BOX may be selected automatically instead of 4:3 PAN SCAN or vice versa. 3) Th is setting is eff ective only when you set TV TYPE in SCREEN SETUP P AUTO or P VIDEO is selected (page to 16:9. 13). Setting playback options CUSTOM SETUP PAUSE MODE
(DVD VIDEO and DVD-R/-RW in VR mode only) AUTO: Th e picture, including subjects that move dynamically, is output with no jitter. Normally select this position. FRAME: Th e picture, including subjects that do not move dynamically, is output in high resolution. TRAC
(DVD sound numbe a DVD
(PCM Digita OFF: N AUTO MULT
(DVD ON: S OFF: D point i the res curren AUDIO Comp
(DVD mode OFF: N STAN track w the rec for wa at nigh MAX:
1) If eac numb audio DTS, 2) When AUT TRA prior LAN depen be pe 3) AUD Dolb 46GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
TRACK SELECTION
(DVD VIDEO only) Gives priority to the sound track which contains the highest number of channels when you play back a DVD VIDEO on which multiple audio
(PCM, DTS, MPEG audio, or Dolby Digital) formats1) are recorded. OFF: No priority given. AUTO2): Priority given. MULTI-DISC RESUME
(DVD VIDEO and VIDEO CD only) ON: See page 23. OFF: Does not store the resume playback point in the memory. Playback starts at the resume playback point only for the current disc in the system. AUDIO DRC3) (Dynamic Range Compression)
(DVD VIDEO and DVD-R/-RW in VR mode only) OFF: No compression of dynamic range. STANDARD: Reproduces the sound track with the kind of dynamic range that the recording engineer intended. Useful for watching movies at low volume late at night. MAX: Narrows the dynamic range fully. 1) If each audio sound track has the same number of channels, the system selects the audio sound tracks in the order from PCM, DTS, Dolby Digital, to MPEG. 2) When you set TRACK SELECTION to AUTO, the language may change. Th e TRACK SELECTION setting has higher priority than the AUDIO settings in LANGUAGE SETUP (page 44). However, depending on the disc, this function may not be performed. 3) AUDIO DRC can only be performed with Dolby Digital sources. CMT-DH7BT.GB.3-097-195-11(1) atically sa. ETUP d (page OM VR ects th no bjects tput D i s c 47GB 3 Tu Pre 4 Ad Pre To sele 1 Pre BAN 2 Pre rep 3 Pre 4 Pre To sele butto Enter using t ENTE To che numb Press t ENTE Notes If you butto chang You c TUN for th Tuner Listening to the radio You can listen to a radio station either by selecting a preset station, or by manually tuning in the station. Listening to FM or AM 1 Press FUNCTION +/
repeatedly to select TUNER FM or TUNER AM (or press TUNER/
BAND on the unit repeatedly to select FM or AM). 2 Press and hold TUNING +/
until the frequency indication changes and then release. Scanning stops automatically when a station is tuned in and TUNED lights up in the display. When a FM stereo program is tuned in, ST lights up in the display. If TUNED does not appear and the scanning does not stop, press TUNING +/ repeatedly to tune in the station you want. To stop automatic scanning Press . To change the AM tuning interval Th e factory setting for AM tuning interval is 9 kHz (or 10 kHz for same areas). 1 Press FUNCTION +/ repeatedly to select TUNER FM or TUNER AM
(or press TUNER/BAND on the unit repeatedly to select FM or AM). 2 Press / to turn off the system. 3 Press DISPLAY to display the clock. 4 Hold down TUNER/BAND and then press / to turn on the system. AM 9k Step or AM 10k Step appears in the display. When you change the interval, all the AM preset stations are erased. Tips To improve broadcast reception, adjust the supplied antennas, or connect an external antenna. When an FM stereo program has static noise, press FM MODE repeatedly until MONO lights up in the display. Th ere will be no stereo eff ect, but the reception will improve. Listening to satellite radio You can operate and listen to XM or SIRIUS satellite radio by connecting an optional antenna or tuner. Before using the system, connect the XM Mini-Tuner and Home Dock or the SiriusConnect Home tuner to the system. See Hooking up the system securely (page xx) for details about connection. 1 Select XM or SIRIUS. Press XM or SIRIUS (or TUNER/
BAND repeatedly). 2 Select the All Channel mode. Press CATEGORY MODE repeatedly until CAT disappear. 48GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
edly AM e unit
). em. clock. d e l the t the nal c noise, ONO o prove. r g an sing Tuner ect oking or NER/
e. ar. Listening to preset radio station 1 Tune in the desired station (see Listening to the radio (page 48)). 2 Press DVD/TUNER MENU . Memory? fl ashes in the display. 3 Press ENTER . A preset number fl ashes in the display. Th e stations are stored from preset number 1. T u n e r Preset number 4 Press PRESET +/ repeatedly to select the preset number you want. 5 Press ENTER . Complete! appears in the display. Th e station is stored. 6 Repeat steps 1 to 6 to store other stations. You can preset up to 20 FM, 10 AM, 20 XM and 20 SIRIUS stations. Th e preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs. Continued 49GB 3 Tune in the desired channel. Press TUNING +/ repeatedly. 4 Adjust the volume. Press VOLUME +/ . To select a channel by Category mode 1 Press XM or SIRIUS (or TUNER/
BAND repeatedly). 2 Press CATEGORY MODE repeatedly until CAT appears. 3 Press CATEGORY +/ repeatedly. 4 Press TUNING +/ repeatedly. To select a channel using the numeric buttons Enter the 3 digits of the desired channel using the numeric buttons , then press ENTER . To check your XM Radio ID or SIRIUS ID number Press the numeric button 0 , then press ENTER to select the channel 0. Notes If you select a channel using the numeric buttons in Category mode, the tuning mode changes to All Channel mode automatically. You cannot select a SIRIUS channel using TUNING +/ if the Parental Lock is set for the channel. CMT-DH7BT.GB.3-097-195-11(1) 4 Press or repeatedly until Lock? appears, then press ENTER . EnterKey appears. 5 Enter your 4-digit password using the numeric buttons . Complete! appears and the Parental Lock is set. To delete the numbers you have entered Press CLEAR repeatedly. To change the password 1 Press SIRIUS (or TUNER/BAND repeatedly) to select SIRIUS. 2 Press DVD/TUNER MENU . 3 Press or repeatedly until Edit Key? appears, then press ENTER . OLD Key appears. 4 Enter your current 4-digit password using the numeric buttons . NEW Key appears. 5 Enter a new 4-digit password using the numeric buttons . 6 To confi rm your new password, re-
enter it using the numeric buttons
. Complete! appears and the new password is set. To list 1 Pre rep 2 Sele liste
. En 3 Ent the To rem 1 Wh in, p the Un 2 Pre Co is u Notes When TUN Categ Th e d indic made been Notes When settin to the settin You c If you chann chann You c 0 or 1 7 To listen to a preset station, press PRESET +/ repeatedly to select the preset station you want. You can also press the numeric buttons , then press ENTER to select a preset station. To cancel presetting Press DVD/TUNER MENU . Notes on presetting XM or SIRIUS stations You cannot preset XM or SIRIUS stations except when you receive the station. You cannot operate CATEGORY +/ in preset tuning mode. It you select a channel using the numeric buttons in preset tuning mode, the tuning mode changes automatically to All Channel mode. Restricting access to specifi c channels (SIRIUS only) Parental Lock You can restrict access to certain channels using your own password. Th e password is set to 0000 as the default. Change the password before you use this function for the fi rst time (see To change the password). 1 Select SIRIUS. Press SIRIUS (or TUNER/BAND repeatedly). 2 Tune in the desired channel
(see Listening to satellite radio
(page xx). 3 Press DVD/TUNER MENU . 50GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
until d
. rental D Edit R . word sing re-
ons w To listen to the locked channels 1 Press SIRIUS (or TUNER/BAND repeatedly) to select SIRIUS. 2 Select a locked channel you want to listen to using the numeric buttons
. EnterKey appears. 3 Enter your 4-digit password using the numeric buttons . To remove the Parental Lock 1 When the locked channel is tuned in, press DVD/TUNER MENU , and then press or repeatedly until Unlock? appears. 2 Press ENTER . Complete! appears and the channel is unlocked. Notes When you select a channel using TUNING +/ in All Channel mode or Category mode, locked channels are skipped. Th e display will return to the original indication if you press or if no entry is made for a set period of time aft er you have been prompted to enter the password. Notes on SIRIUS Parental Lock When the system is reset to the factory settings, the Parental Lock password returns to the default (0000), but Parental Lock settings are not removed. You cannot preset locked channels. If you set the Parental Lock for a preset channel, the preset information for that channel returns to the default. You cannot set the Parental Lock for channels 0 or 184. CMT-DH7BT.GB.3-097-195-11(1) T u n e r 51GB Bluetooth Using the Bluetooth function Th is system supports Bluetooth A2DP and AVRCP profi les. For details on Bluetooth wireless technology, see Bluetooth wireless technology (page 34). Check the websites below for the latest information about compatible devices. For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
<http://www.sony.ca/
ElectronicsSupport/>
For customers in Europe:
<http://sonydigital-link.com/dna>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.css.ap.sony.com/>
Listening to music of a Bluetooth mobile phone or Bluetooth device You can listen to music from your Bluetooth mobile phone or Bluetooth device over a wireless connection. Follow the procedure below to listen to music from Bluetooth devices with this system. Pairing this system with a Bluetooth device Connecting to registered devices Playing music of a Bluetooth device For details about the operations of the Bluetooth device, also refer to the operation manual supplied with your Bluetooth device. Pairin device Pairin device before to pair device perfor perfor compl a Blue 1 Pla co 1 m 2 Se Pre to Blu 3 Op an op Fo the op Blu Wh wit the Blu on Th C Wh thi
(A dev no can op 52GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
th n to this oth ce he ur Pairing this system with a Bluetooth device Pairing is an operation where Bluetooth devices register with each other beforehand. Use the procedure below to pair the system with your Bluetooth device. Once a pairing operation is performed, it does not need to be performed again. If pairing is already completed, proceed to Playing music of a Bluetooth device (page 16). 1 Place the Bluetooth device to be connected to this system within 1 meter of the system. 2 Select the Bluetooth function. Press FUNCTION +/ repeatedly to select Bluetooth (or press Bluetooth on the unit). 3 Operate the Bluetooth device and perform the pairing operation. For details about the operations of the Bluetooth device, refer to the operation manual supplied with your Bluetooth device. When searching for this system with the Bluetooth device, a list of the devices found may appear in the Bluetooth device display depending on the type of Bluetooth device. Th is system appears as CMT-DH7BT. When establishing a connection with this system, select the audio profi le
(A2DP, AVRCP) at the Bluetooth device. If the Bluetooth device does not support the AVRCP profi le, you cannot perform playback or other operations with the system (page 16). CMT-DH7BT.GB.3-097-195-11(1) 4 Enter the passcode. Passcode entry may be required depending on the type of Bluetooth device. When PIN? and a countdown appear, enter the passkey at the system as follows:
Press the numeric buttons (or
+/ and / on the unit) to enter the same passkey that was entered at the Bluetooth device, and then press ENTER (or BLUETOOTH OPR on the unit). Once pairing is completed and the connection is established, the system display changes as follows:
Connect Name of the Bluetooth device B L U E T O O T H To cancel passcode entry partway Press . Notes Passcode may be called Passkey, PIN code, PIN number or Password, etc. depending on the device. Th is system only supports numerical passcodes up to 4 digits. Th e pairing standby status of the system is cancelled aft er about 30 seconds. If pairing is not successful, redo the procedure from step 1. While connected to a Bluetooth device, this system cannot be detected and a connection cannot be established from another Bluetooth device. Continued 53GB To erase all the pairing registration information 1 Press FUNCTION +/ repeatedly to select BLUETOOTH (or press BLUETOOTH on the unit). When the system is connected with a Bluetooth device (when the Bluetooth device name or other information appears in the system display), press and hold BLUETOOTH OPR on the unit for about 2 seconds to put the system in Bluetooth standby mode. 2 Press CLEAR . Delete? appears. 3 Press ENTER . Complete! appears and all the pairing information is erased. Note In order to connect with a Bluetooth device aft er performing this operation, you must enter the passcode again. Playing music of a Bluetooth device You can operate a Bluetooth device by connecting the system and a Bluetooth device using AVRCP. If the system is not connected with a Bluetooth device using AVRCP, Not In Use appears when you operate the system. 1 Select the Bluetooth function. Press FUNCTION +/ repeatedly to select BLUETOOTH (or press BLUETOOTH on the unit). 2 Establish a connection from the Bluetooth device. For details about the operations of the Bluetooth device, refer to the operation manual supplied with your Bluetooth device. Once the connection is established, the system display changes as follows:
Connect Name of the Bluetooth device 3 Start playback. Press (or BLUETOOTH on the unit). Depending on the Bluetooth device, you may need to start up the AV soft ware of the Bluetooth device beforehand. 4 Adjust the volume. Press VOLUME +/ . To check the address of a connected Bluetooth device Press DISPLAY while the Bluetooth device name appears in the system display. Th e Bluetooth device address appears for 8 seconds. To can Blueto Press a on the BLUET Other To Pause Stop p Select Find a a fi le View t Blueto device Note Th ese o certain actual o connec Notes device If you Bluet opera Bluet Depe you c of the When is pre headp a con anoth 54GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
ice by oth s not using you on. atedly ess nit). m the of e your hed, llows:
tooth vice, V ed oth ars for To cancel the connection with a Bluetooth device Press and hold BLUETOOTH OPR on the unit for about 2 seconds until the BLUETOOTH indicator turns off . Other operation To Press Pause playback . Stop playback . Select a fi le / . Find a point in a fi le View the Bluetooth device address Hold down /
. DISPLAY repeatedly when the system is on. Note Th ese operations may not be available for certain Bluetooth devices. In addition, the actual operations may diff er depending on the connected Bluetooth device. Notes on connections with Bluetooth devices If you cannot connect with a paired Bluetooth device, perform the pairing operation between the system and the Bluetooth device again. Depending on the type of Bluetooth device, you can adjust the volume using the controls of the Bluetooth device. When BLUETOOTH on the unit is pressed while connected to Bluetooth headphones, it may take some time until a connection is made to the system from another Bluetooth device. CMT-DH7BT.GB.3-097-195-11(1) Listening to music on this system using Bluetooth headphones You can listen to music played on this system using your Bluetooth headphones over a wireless connection. B L U E T O O T H Follow the procedure below to listen to music on this system with Bluetooth headphones. Pairing this system with Bluetooth headphones Connecting to registered headphones Playing music on this system For details about the operations of the Bluetooth headphones, also refer to the operation manual supplied with your Bluetooth headphones. Continued 55GB To cancel passcode entry partway Press . Notes Passcode may be called Passkey, PIN code, PIN number or Password, etc. depending on the device. Th is system only supports numerical passcodes up to 4 digits. Th e pairing standby status of the system is cancelled aft er about 30 seconds. If pairing is not successful, redo the procedure from step 1. While connected to a Bluetooth device, this system cannot be detected and a connection cannot be established from another Bluetooth device. To erase all the pairing registration information 1 Press FUNCTION +/ repeatedly to select BLUETOOTH (or press BLUETOOTH on the unit). When the system is connected with a Bluetooth device (when the Bluetooth device name or other information appears in the system display), press and hold BLUETOOTH OPR on the unit for about 2 seconds to put the system in Bluetooth standby mode. 2 Press CLEAR . Delete? appears. 3 Press ENTER . Complete! appears and all the pairing information is erased. Note To connect with Bluetooth headphones aft er performing this operation, you must enter the passcode again. Pairing this system with Bluetooth headphones Pairing is an operation where Bluetooth devices register with each other beforehand. Use the procedure below to pair the system with your Bluetooth headphones. Once a pairing operation is performed, it does not need to be performed again. If pairing is already completed, proceed to Playing music on this system (page 18). 1 Select a function other than the Bluetooth function. Press FUNCTION +/ repeatedly. 2 Place the Bluetooth headphones to be connected to this system within 1 meter of the system. 3 Put the Bluetooth headphones in pairing mode. For details about the operations of the Bluetooth headphones, refer to the operation manual supplied with your Bluetooth headphones. 4 Press and hold BLUETOOTH OPR on the unit for about 7 seconds until the BLUETOOTH indicator fl ashes. Sound output from the speakers is stopped. 5 Enter the passcode. Follow the same procedure as in step 4 of Pairing this system with a Bluetooth device (page 14). Once pairing is completed and the connection is established, the system display changes as follows:
Connect Name of the Bluetooth device 56GB CMT-DH7BT.GB.3-097-195-11(1) Playin You ca Blueto system AVRC 1 Se Blu Pre 2 Es Blu Pre un lig If m tha is p sys to
(C to rec att est On the C dev 3 Sta th De hea sys etc Fo Blu op Blu 4 Ad Pre CMT-
y IN c. m is ring is m step
, this ection on edly
. ith a tooth n ress on ut the de. aft er er the Playing music on this system You can operate this system from Bluetooth headphones by connecting the system and Bluetooth headphones using AVRCP. 1 Select a function other than the Bluetooth function. Press FUNCTION +/ repeatedly. 2 Establish a connection with the Bluetooth headphones. Press and hold BLUETOOTH OPR on the unit for about 2 seconds until the BLUETOOTH indicator lights up, then release the button. If more than one Bluetooth device that has been connected in the past is present around the system, the system attempts to connect with up to 3 most recently connected devices.
(Connection is attempted with up to 3 devices in order from the most recently connected device, and the attempts end when a connection is established.) Once the connection is established, the system display changes as follows:
Connect Name of the Bluetooth device 3 Start playback of the music for the function selected in step 1. Depending on the type of Bluetooth headphones, you can operate this system (playback, volume control, etc.) using the headphones controls. For details about the operations of the Bluetooth headphones, refer to the operation manual supplied with your Bluetooth headphones. 4 Adjust the volume. Press VOLUME +/ . CMT-DH7BT.GB.3-097-195-11(1) To cancel the connection with Bluetooth headphones Press and hold BLUETOOTH OPR on the unit for about 2 seconds until the BLUETOOTH indicator turns off . Notes If you cannot connect with paired Bluetooth headphones, perform the pairing operation between the system and the Bluetooth headphones again. When the system is changed to a function other than Bluetooth function and BLUETOOTH OPR on the unit is pressed while connected to a Bluetooth device, it may take some time until a connection is made with the Bluetooth headphones. Th is system stores separate volume settings for when listening through headphones connected to the PHONES jack on the unit, or when listering through Bluetooth headphones. Th is system stores separate volume settings for when listening through the spakers or PHONES jack on the unit, or when listering through Bluetooth headphones. B L U E T O O T H 57GB Sound Adjustment Adjusting the sound Generating a more dynamic sound (Dynamic Sound Generator X-tra) You can reinforce the bass and create a more powerful sound. Th e DSGX setting is ideal for music sources. Press DSGX on the unit repeatedly. Each time you press the button, the display changes as follows:
DSGX ON DSGX OFF Tip Th e default setting is DSGX ON. Setting the sound eff ect 1 Press EQ repeatedly to select BASS or TREBLE. 2 Press PRESET +/ repeatedly to adjust the level. 58GB CMT-DH7BT.GB.3-097-195-11(1) Other operations Using the timer Falling asleep to music Sleep Timer You can set the system to turn off aft er a certain time, so that you can fall asleep to music. Press SLEEP repeatedly. Each time you press the button, the minute display changes cyclically as follows:
90min 80min 70min 10min OFF Other operations To Check the remaining time Change the time to turn off Cancel the Sleep Timer Do this Press SLEEP once. Press SLEEP repeatedly to select the time you want. Press SLEEP repeatedly until SLEEP OFF appears in the display. Setting the timer Play Timer You can wake up to music at a preset time. Make sure you have set the clock
(see Setting the clock on page18). 1 Prepare the sound source. Insert a disc you want to play back. Th en press VOLUME +/ . 2 Press TIMER MENU . 3 Press or repeatedly to select PLAY SET?, then press ENTER . ON appears and the hour indication fl ashes in the display. 4 Set the time to start playback. Press or repeatedly to set the hour, then press ENTER . Th e minute indication fl ashes in the display. Use the procedure above to set the minute. OFF appears and the hour indication fl ashes in the display. 5 Set the time to stop playback using the same procedure as step 4. O t h e r o p e r a t i o n s 6 Select the sound source. Press or repeatedly until the music source you want appears in the display, then press ENTER . Th is display will show the timer settings. 7 Press to turn off the system. Continued 59GB CMT-DH7BT.GB.3-097-195-11(1) Other operations To Check the setting Change the setting Cancel the Play Timer Do this 1 Press TIMER MENU . TIMER SEL?
fl ashes in the display. 2 Press ENTER . 3 Press or repeatedly to select PLAY SELECT?, then press ENTER . Start from step 1. 1 Press TIMER MENU . TIMER SEL?
fl ashes in the display. 2 Press ENTER . 3 Press or repeatedly to select TIMER OFF?, then press ENTER . Notes Th e Play Timer will not be activated if the system is turned on or if STANDBY fl ashes in the display. Th e system turns on 30 seconds before the preset time. Do not operate the system from the time the system turns on until the recording starts. Before the system is turned off , if a connection is made with the Bluetooth headphones, sounds played by the Play Timer may be output to the Bluetooth headphones. Changing the display Checking the clock Press DISPLAY when the system is turned off . The clock is displayed for 8 seconds. Adjusting the brightness of the display Press DIMMER repeatedly. Each time you press the button, the display changes cyclically as follows:
DIMMER OFF DIMMER 1 DIMMER 2*
* DIMMER 2 is the darkest. View abo View disc Press Each t display Dis Clo Check remai Press T Each t display When R/-RW Whe chap E or th T Whe cond E title R E chap R chap T 60GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
y stem ayed the
When playing an AUDIO CD or VIDEO CD without PBC function:
Elapsed playing time of the current track Remaining time of the current track Elapsed playing time of the current disc3) Remaining time of the current disc3) Title of the disc1)4) When playing a VIDEO CD/Super VCD:
Elapsed playing time of the current scene/track Title of the disc1)4) When playing MP3 audio tracks on a DATA CD/DVD:
Elapsed playing time of the current track Title of the track Checking the total playing time and titles Press TIME/TEXT repeatedly when playback is stopped. Each time you press TIME/TEXT , the display changes from DVD VIDEO or DVD-R/-RW in VR mode:
Total number of titles on the disc Title of the disc1) VIDEO CD without PBC playback or AUDIO CD:
Total number of the tracks on the disc and the total playing time of the disc Title of the disc1) VIDEO CD with PBC playback:
Total number of scene on the disc Title of the disc1) O t h e r o p e r a t i o n s Continued 61GB Viewing information about the disc Viewing information about the disc in the front panel display Press DISPLAY . Each time you press DISPLAY , the display changes from Disc information Clock display (for 8 seconds) Checking the elapsed playing time, remaining time and titles Press TIME/TEXT during playback. Each time you press TIME/TEXT , the display changes from When playing a DVD VIDEO or DVD-
R/-RW in VR mode:
When the menu or the title without a chapter is played back Elapsed playing time of the menu or the current title Title of the disc1) When a chapter other than above condition is played back Elapsed playing time of the current Remaining time of the current title Elapsed playing time of the current Remaining time of the current title chapter chapter Title of the disc1)2) CMT-DH7BT.GB.3-097-195-11(1) 1) NO TEXT appears in the display if the DVD VIDEO is not a DVD-TEXT disc, the AUDIO CD is not a CD-TEXT disc or the VIDEO CD does not have text information. 2) Th e current chapter number and the current title number are displayed for 2 seconds before the display returns to elapsed playing time when you press TIME/TEXT during display of title of the disc. 3) When Program Play or Shuffl e Play is turned on, the elapsed playing time and the remaining time of the disc would be skipped. 4) Th e current track number and the current index number (for a disc without PBC) or the current scene number (for a disc with PBC) are displayed for 2 seconds before the display returns to elapsed playing time when you press TIME/TEXT during display of the title of disc. Notes If you play back a disc containing JPEG image fi les only, JPEG or No Audio appears in the display. You cannot use TIME/TEXT to change the display of disc information when:
a JPEG image fi le is played back. playback is stopped for DATA CD/DVD with MP3 audio tracks and/or JPEG image fi les. If the MP3 audio track title contains characters which cannot be displayed, these characters will be displayed as *. 62GB CMT-DH7BT.GB.3-097-195-11(1) Viewing information about the disc in the on-screen display Press TIME/TEXT . Each time you press TIME/TEXT while playing the disc, the display changes from Th e time display that you can view on the TV screen depends on the disc you are playing. T: title or track C: chapter D: disc Bit rate Time information Album Title Disc/track/fi le title When playing a DVD VIDEO or DVD-
R/-RW in VR mode:
Elapsed playing time of the current title Remaining time of the current title Elapsed playing time of the current chapter Remaining time of the current chapter Elapsed playing time of the current title and title of the disc When playing a VIDEO CD/Super VCD:
Elapsed playing time of the current scene/track When CD wi Ela track Rem Ela disc Rem Ela track a When Elapse track/fi Notes Only symb Depe displ For M ISO 9 track Displa the di
(DVD When during curren TV scr When For ex multip to 5.1 a DVD Examp For Do 2 Front 1 Cente CMT-
the y on the are VD-
ent itle ent hapter ent r When playing an AUDIO CD or VIDEO CD without PBC function:
Elapsed playing time of the current track Remaining time of the current track Elapsed playing time of the current disc Remaining time of the current disc Elapsed playing time of the current track and title of the disc When playing a DATA CD/DVD:
Elapsed playing time of the current track/fi le Checking the date information of JPEG image fi les You can check the date information during playback when Exif* tag is recorded in the JPEG image fi les. DISPLAY repeatedly Press during playback. Th e Control Menu appears. Date information
* Exchangeable Image File Format is a digital camera image format defi ned by the Japan Electronics & Information Technology Industries Association (JEITA). Note Th e date information format varies depending on the area. O t h e r o p e r a t i o n s 63GB Notes Only alphabet letters, numbers and some symbols can be displayed. Depending on the disc, the system can only display a limited number of characters. For MP3 audio tracks with format other than ISO 9660 Level 1 and Level 2, album title and track title may not be displayed. Displaying the audio information of the disc
(DVD VIDEO only) When you press AUDIO repeatedly during playback, the format of the current audio signal is displayed on the TV screen. When playing a DVD VIDEO:
For example, in Dolby Digital format, multiple signals ranging from monaural to 5.1 channel signals can be recorded on a DVD VIDEO. Example:
For Dolby Digital 5.1 channel:
2 Surround components 2 Front components +
1 Center component 1 LFE (Low Frequency Eff ect) component CMT-DH7BT.GB.3-097-195-11(1) AUDIO IN jack Connect the audio output jack of an optional component (portable audio player, etc.). COMPONENT VIDEO OUT jacks Connect the component video input jacks of the TV or projector. If your TV accept progressive format signals, you must use this connection and press PROGRESSIVE on the unit repeatedly to select P AUTO or P VIDEO. You can enjoy higher quality video images. S VIDEO OUT/VIDEO OUT jacks Connect the S Video/video input jack of the TV. You can enjoy higher quality video images when you select the S VIDEO. DIGITAL OUT jack Connect the digital optical input jack of an optional digital component
(such as amplifi er). Note Sound is output only when the system function is set to DVD. Enjo soun amp 1 Co See com 2 Co op wi Fo the wit 3 Sta so 4 Se wa See Hooking up optional components To enhance your system, you can connect optional components. Refer to the operating instructions provided with each component. Front panel Rear panel 64GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
Enjoying the multi channel sound with the optional amplifi er 1 Connect the digital optical cord. See Hooking up optional components on page81. 2 Connect the speakers to an optional amplifi er equipped with a decoder. For the speakers placement, refer to the operating instructions supplied with the connected amplifi er. 3 Start playing a multi channel source, such as a DVD VIDEO. 4 Select the audio format you want. See Changing the sound on page xx. of an udio jacks nput our gnals, nd unit or P quality jacks ut gher select t jack t m CMT-DH7BT.GB.3-097-195-11(1) O t h e r o p e r a t i o n s 65GB Additional Information Troubleshooting Should you encounter a problem with your system, do the following:
1 Make sure the power cord and speaker cords are connected correctly and fi rmly. 2 Find your problem in the troubleshooting checklist below and take the indicated corrective action. If the problem persists aft er doing all of the above, consult your nearest Sony dealer. General The display starts fl ashing as soon as you plug in the power cord even though you have not turned on the system. Press (see step 8 of Hooking up the system on page 11). The clock or timer setting is canceled. Th e power cord is disconnected or a power failure occurred. Redo Setting the clock (page 14). If you have set the timer, redo Waking up to music
(page 69).
: appears in the display. A power failure has occurred. Set the clock (page 14) and timer settings
(page 69) again. There is no sound. Press VOLUME + repeatedly. Th e headphones are connected to the PHONES jack. Check the speaker connections
(page 9). Th e system is in pause mode, in Slow-
motion Play or in Lock Search. Press to start the playback. If the BLUETOOTH indicator is lit or fl ashing when a function other than the Bluetooth function is selected, no sound is heard through the speakers or PHONES jack . Press and hold BLUETOOTH OPR for about 2 seconds until the BLUETOOTH indicator turns off . If the STANDBY indicator fl ashes Immediately unplug the power cord, and check the following items. If your system has a voltage selector, is the voltage selector set to the correct voltage?
Are you using only the supplied speakers?
Is anything blocking the ventilation holes on the rear of the system?
Aft er the STANDBY indicator stops fl ashing, reconnect the power cord, and turn on the system, If the issue persists, contact your nearest Sony dealer. 66GB There A T unit or V Mov nois Con outl Inst avai The ti Che corr Can
(pag The re Rem rem Mov Poin Rep Loca fl uo There Red The co persis Turn on a irreg spea THEAT work. If di unit wor CMT-DH7BT.GB.3-097-195-11(1) CMT-
on ven the king celed. or a tting et usic the s the low-
ress is lit r than d, no ers old H There is severe hum or noise. A TV or VCR is placed too close to the unit. Move the unit away from the TV or VCR. Move the unit away from the source of noise. outlet. Connect the unit to a diff erent wall Install a noise fi lter (commercially available) to the power cord. Speakers Sound comes from one channel or unbalanced left and right volume. Place the speakers as symmetrically as possible. Check that the speaker are connected securely and correctly. Th e source being played back is monaural. Disc Player The disc does not eject. Consult your nearest Sony dealer. Playback does not start. Check whether a disc is loaded. Wipe the disc clean (page 87). Reinsert the disc. Insert the disc that this system can play back (page 6). Insert the disc in the disc slot with the label side facing up. Remove the disc and wipe away the moisture on the disc, then leave the system turned on for a few hours until the moisture evaporates. Press to start playback. Th e region code on the DVD VIDEO does not match the system. Cancel the Custom Parental Control function (page 39). A d d i t i o n a l I n f o r m a t i o n The sound skips. Wipe the disc clean (page 87). Reinsert the disc. Move the unit to a place without vibration (e.g., on top of a stable stand). Move the speakers away from the unit, or place them on separate stands. When you listen to a track with bass sounds at high volume, the speaker vibration may cause the sound to skip. Continued 67GB The timer does not function. Check the timer setting and set the correct time (page 69). Cancel the Sleep Timer function
(page 69). The remote does not function. Remove the obstacles between the remote and the unit. Move the remote closer to the unit. Point the remote at the units sensor. Replace the batteries (R6/size AA). Locate the unit away from the fl uorescent light. There is acoustic feedback. Reduce the volume. The color irregularity on a TV screen persists. Turn off the TV set once, then turn it on aft er 15 to 30 minutes. If the color irregularity still persists, place the speakers farther away from the TV set. THEATRE SYNC function does not work. If distance between the TV and this unit is too far, this function may not work. Install the unit near the TV. CMT-DH7BT.GB.3-097-195-11(1) Playback does not start from the fi rst track. Th e system is in Program Play or Shuffl e Play mode. Turn off Program Play and Shuffl e Play. Resume Play has been selected. Press twice. Th en, press to start playback (page 21). Th e title of DVD VIDEO or PBC menu automatically appears on the TV screen. Playback starts automatically. Th e DVD VIDEO features an auto playback function. Playback stops automatically. Some discs may contain an auto pause signal. While playing such a disc, the playback stops at auto pause signal. You cannot perform some functions such as Stop, Lock Search, Slow-
motion Play, Repeat Play, Shuffl e Play or Program Play. Depending on the disc, you may not be able to do some of the operations above. Refer to the operating instructions supplied with the disc. The DATA CD (MP3 audio track/JPEG image fi le) cannot be played back. Th e DATA CD is not recorded in a format that conforms to ISO 9660 Level 1, Level 2, or Joliet (expansion format). Th e DATA DVD is not recorded in a format that conforms to UDF
(Universal Disk Format). Th e MP3 audio track does not have the extension .MP3. Th e data is not stored in the desired format. Th e MP3 audio tracks in format other than MPEG 1 Audio Layer 3 cannot be played back. Th e system can playback to a depth of 8 folders only. For MP3/JPEG fi les, check the MODE
(MP3, JPEG) setting (page 30). Th e disc contains more than 200 Th e album contains more than 600 albums. tracks/fi les. For MP3/JPEG fi les, the album contains more than 300 tracks/fi les when the MODE (MP3, JPEG) is set to AUTO. Th e JPEG image fi le does not have the extension .JPG or .JPEG. Th e JPEG image fi le is larger than 3,072 (width) 2,048 (height) in normal mode, or more than 2,000,000 pixels in Progressive JPEG mode which is mainly used on the Internet website. JPEG image fi les with a high width to length ratio cannot be played back. The MP3 audio tracks take longer time to play back than others. Aft er the system reads all the tracks on the disc, playback may take more time than usual if:
the number of albums or tracks on the disc is very large. the album and track organization structure is very complex. The disc title, album title, track title, CD-TEXT and DVD-TEXT characters do not appear properly. Use a disc that conforms to the ISO 9660 Level 1, Level 2, or Joliet
(expansion). Th e disp U Lo N Sy Oth corr The su when or MP Che setti Dep outp chan even Dolb The so you p CD, M Mak prop Blueto Pairin Mov the s Conne Th e to co and conn Ena Blue Th e has oper 68GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
other not be th of MODE 00 es is set e the n 0,000 which bsite. th to k. er ks on time s on on itle, ers t Th e character code that can be displayed by this system are as follows:
Upper cases (A to Z) Lower cases (a to z) Numbers (0 to 9) Symbols (< > * +, / [ ] _) Other characters may not be displayed correctly. The surround eff ect is diffi cult to hear when you are playing a Dolby Digital or MPEG audio sound track. Check the speaker connections and settings (pages 9 and 47). Depending on the DVD VIDEO, the output signal may not be the entire 5.1 channel. It may be monaural or stereo, even if the sound track is recorded in Dolby Digital or MPEG audio format. The sound loses stereo eff ect when you play back an AUDIO CD, VIDEO CD, MP3 audio track or DVD VIDEO. Make sure the system is connected properly. Bluetooth device Pairing cannot be done. Move the Bluetooth device closer to the system. Connection is not possible. Th e Bluetooth device you attempted to connect does not support the A2DP and AVRCP profi les, and cannot be connected with the system. Enable the Bluetooth function of the Bluetooth device. Th e pairing registration information has been erased. Perform the pairing operation again. CMT-DH7BT.GB.3-097-195-11(1) While connected to a Bluetooth device, this system cannot be detected and a connection cannot be established from another Bluetooth device. The sound skips or fl uctuates, or the connection is lost. Th e system and the Bluetooth device are too far apart. If there are obstacles between the system and your Bluetooth device, remove or avoid the obstacles. If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device, or a microwave oven nearby, move them away. The sound of your Bluetooth device cannot be heard on this system. Turn up the volume on your Bluetooth device fi rst, and then adjust the volume using VOLUME +/ . Severe hum or noise If there are obstacles between the system and your Bluetooth device, remove or avoid the obstacles. If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device, or a microwave oven nearby, move them away. Turn down the volume of the connected Bluetooth device. A d d i t i o n a l I n f o r m a t i o n The sound from the Bluetooth headphones is distorted. Turn down the volume of the system using VOLUME . If your headphones have a volume control, also adjust the volume using the headphones volume control. Continued 69GB If video signal from your system has to go through your VCR to your TV, the copy-protection applied to some DVD VIDEO programs could aff ect the picture quality. If you still experience problems aft er checking your connections, connect your unit directly to your TVs S Video input (page 10). Keep the speaker cords away from the antennas. When you connect your TV to the COMPONENT VIDEO OUT jacks and play back video-based soft ware in progressive signal format, some sections of the image may appear unnatural due to the conversion process. The aspect ratio of the TV screen cannot be changed even though you can set TV TYPE under SCREEN SETUP in the Setup Menu when you play back a wide picture. Th e aspect ratio is fi xed on your DVD VIDEO. If you connect the unit with the S Video cord, connect directly to the TV. Otherwise, you may not change the aspect ratio. Depending on the TV, you may not change the aspect ratio. Messages do not appear on the TV screen in the language you want. Select the language you want for the on-screen display in OSD under LANGUAGE SETUP in the Setup Menu (page 44). The language for the sound track cannot be changed. Multilingual tracks are not recorded on the DVD VIDEO being played back. Th e DVD VIDEO prohibits changing the language for the sound track. Picture There is no picture. Press FUNCTION +/ repeatedly to select DVD (or press DVD on the unit). Check that the system is connected securely. Th e video cord is damaged. Replace it with a new one. Make sure you connect the unit to the video input jack of your TV (page 10). Make sure you turn on the TV and operate the TV correctly. Press PROGRESSIVE on the unit repeatedly to select INTERLACE if you connect your TV to the units COMPONENT VIDEO OUT jacks and your TV cannot accept progressive signal. You have set to progressive format but your TV cannot accept the signal in progressive format. In this case, set to interlace format (the default setting)
(page 16). Even if your TV is compatible with progressive format (525p/625p) signals, the image may be aff ected when you set to progressive format. In this case, set to interlace format (the default setting) (page 16). Make sure you select the video input on the TV so that you can view the pictures from the system. Make sure you connect the unit and your TV using only the supplied video code. Picture noise appears. Clean the disc. 70GB CMT-DH7BT.GB.3-097-195-11(1) The su chang Mul on t back Th e the s The su Th e subt The a Mul DVD Th e the a Tuner The ra Th e a po than stati There
(TUN displa Set t
(pag Con
(pag Find prov the a good you exte Keep Hom from cord Th e sign sure Loca the s CMT-
has to V, the DVD e ence irectly 10). m the e ks are e n h you N n you DVD he TV. he ot TV t. the r up k ded on ack. ging Try turning off the surrounding electrical equipment. A stereo FM program cannot be received in stereo. Press FM MODE repeatedly until MONO disappears from the display. The system cannot receive satellite channels at all. Check that the XM Mini-Tuner and Home Dock or the SiriusConnect Home tuner are connected properly. Th e receiving condition is not good. Move to the place where the condition is good. Check that you subscribed to the desired satellite radio service (page XX). Optional components There is no sound. Refer to General item Th ere is no sound. (page 79) and check the condition of the system. Connect the component properly
(page 76) while checking:
if the cords are connected properly. if the cord plugs are fi rmly inserted all the way. Turn on the connected component. Refer to the operating instructions supplied with the connected component and start playing. A d d i t i o n a l I n f o r m a t i o n Continued 71GB The subtitles language cannot be changed. Multilingual subtitles are not recorded on the DVD VIDEO being played back. Th e DVD VIDEO prohibits changing the subtitles. The subtitles cannot be turned off . Th e DVD VIDEO prohibits turning off subtitles. The angles cannot be changed. Multi-angles are not recorded on the DVD VIDEO being played back. Th e DVD VIDEO prohibits changing the angles. Tuner The radio presetting is canceled. Th e power cord is disconnected or a power failure occurred for longer than half a day. Redo Presetting radio stations (page 51). There is severe hum or noise.
(TUNED or ST fl ashes in the display) Set the proper band and frequency Connect the antenna properly
(page 51).
(page 10). Find a place and an orientation that provide good reception, then set up the antenna again. If you cannot obtain good reception, we recommend that you connect a commercially available external antenna. Keep the antennas, SiriusConnect Home tuner, and AC adaptor away from the speaker cords and the power cord to avoid picking up noise. Th e supplied FM lead antenna receives signals along its entire length, so make sure you extend it fully. Locate the antennas as far away from the speaker cords as possible. CMT-DH7BT.GB.3-097-195-11(1) When on the When version numbe Althou for Son operat the sys again t Self-diagnosis Function
(When letters/numbers appear in the display) When the self-diagnosis function is activated to prevent the system from malfunctioning, a 5-character service number (e.g. C 13 50) with a combination of a letter and 4 digits appears on the TV screen and the front panel display. In this case, check the following table. First 3 characters of the service number C 13 Cause and corrective action C 31 E XX
(XX is a number) Th is disc is dirty. Clean the disc with a soft cloth (page 87). Th e disc is not inserted correctly. Restart the system, then re-insert the disc correctly. To prevent a malfunction, the system has performed the self-diagnosis function. Contact your nearest Sony dealer or local authorized Sony service facility and give the 5-character service number. Example: E 61 10 If the system still does not operate properly after performing the above measures or other troubles not described above occur, reset the system as follows:
1 Unplug the power cord. 2 Plug the power cord back in. 3 Press to turn on the system. 4 Press , DISPLAY and at the same time. RESET appears in the display. Th e system is reset to the factory settings except for DVD settings. You should set the settings you made, such as the preset stations, clock and timer. To return the DVD setup to the default settings*, perform reset as follows:
1 Press DISPLAY when playback is stopped. Th e Control Menu appears on the TV screen. 2 Press or repeatedly to
(SETUP), then press select ENTER . 3 Press or repeatedly to select RESET, then press ENTER . 4 Press or repeatedly to select YES, then press ENTER . It takes a few seconds to complete. Do not press when resetting the system.
* Except for Parental Control settings 72GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
When displaying the version number on the TV screen When you turn on the system, the version number [VER.X.XX] (X is a number) may appear on the TV screen. Although this is not a malfunction and for Sony service use only, normal system operation will not be possible. Turn off the system, and then turn on the system again to operate. he a ront e ctive with a 87). erted em, he med earest ocal y nd cter 0 Messages One of the following messages may appear or fl ash in the front panel display during operation. DVD player, Tuner Cannot Play A disc that cannot be played back was inserted. A DVD VIDEO with unsupported region code was inserted. Data Error Th e MP3 audio track and JPEG image fi le you want to play back is damaged. Th e MP3 audio track does not conform to MPEG 1 Audio Layer 3 format. Th e JPEG image fi le does not conform to DCF format. Th e MP3 audio track has the extension
.MP3 but it is not in MP3 format. Th e JPEG image fi le has the extension
.JPG or .JPEG but it is not in JPEG format. No Disc Th ere is no disc in the disc slot. Not In Use You have pressed a button whose operation is not allowed or invalid at that time. OFF TIME NG!
Th e on time and off time of Play Timer is the same. A d d i t i o n a l I n f o r m a t i o n Continued 73GB CMT-DH7BT.GB.3-097-195-11(1) PASSWORD Custom Parental Control or Parental Control is set. Please Wait Th e system is doing initialization process. Reading Th e system is reading information of the disc. Some buttons are not available. Bluetooth device Connect Bluetooth communication was established. Disconnect Communication with a Bluetooth device was cut off for some reason, or Bluetooth communication was ended. Not Connect Connection was not possible. No Device A pairable Bluetooth device was not found. Not In Use Th e system is not connected with a Bluetooth device using AVRCP. PIN?
Th e system is asking for the passcode. For details, see Using the Bluetooth function (page 14). Please Wait Th e system is reading for usage of a Bluetooth device. XM ANTENNA Th e XM Mini-Tuner and Home Dock are not connected. Check all the connections. CH You have entered an invalid channel number. Th e channel to be tuned-in is void due to the change by the broadcast service, or the receiving condition is not good. LOADING Th e system have not fi nished receiving the entire audio data or text information. Some buttons are not available. NO SIGNAL Th e receiving condition is not good. Try moving the antenna to another location. Make sure the antenna points south. For details about the antenna location, see the instructions supplied with the XM Mini-Tuner and Home Dock. OFF AIR Th e channel is not broadcasted now. UPDATING You have not subscribed for XM or the channel is not authorized. You need to subscribe for XM. Th ere is no text information or time information in the channel. Th is is not an error. Th e text information may not be displayed depending on the system condition, for example, right aft er the system has received a channel. 74GB CMT-DH7BT.GB.3-097-195-11(1) SIRIUS ANTE Th e an Check SiriusC antenn ACQU Th e re movin For de see the SiriusC Call 8 You ha chann CHEC Th e Si not co conne again. suppli tuner Invali You ha numbe void d service good. SUB U You ha the ch to sub UPDA Chann Home Th ere inform an erro be disp condit system CMT-
ck l n is dcast s not ing ation. Try ation. h. For see XM w. the d to e not not em he SIRIUS ANTENNA Th e antenna is not connected properly. Check the connection between the SiriusConnect Home tuner and the antenna. ACQUIRING Th e receiving condition is not good. Try moving the antenna to another location. For details about the antenna location, see the instructions supplied with the SiriusConnect Home tuner. Call 888539SIRI You have not subscribed for the selected channel. CHECK SIRIUS Th e SiriusConnect Home tuner is not connected properly. Check all the connections, and then turn the system on again. Also make sure if the AC adaptor supplied with the SiriusConnect Home tuner is connected to a wall socket. Invalid You have entered an invalid channel number. Th e channel to be tuned-in is void due to the change by the broadcast service, or the receiving condition is not good. SUB UPDATED You have not subscribed for SIRIUS or the channel is not authorized. You need to subscribe for SIRIUS. UPDATING Channel information or SiriusConnect Home tuner fi rmware is being updated. Th ere is no text information or time information in the channel. Th is is not an error. Th e text information may not be displayed depending on the system condition, for example, right aft er the system has received a channel. CMT-DH7BT.GB.3-097-195-11(1) Precautions Discs that this system CANNOT play Discs of non-standard shape (for example, heart, square, star) Discs that have adhesive tape, paper, or sticker attached to them Rental or used discs with attached seals where the glue extends beyond the seal Discs that have labels printed using ink that feels tacky when touched Notes on discs Before playing, wipe the disc with a cleaning cloth from the center out to the edge. Do not clean discs with solvents, such as benzine thinner, or commercially available cleaners or anti-static spray intended for vinyl LPs. Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight. Do not use discs encircled with a protection ring. Th is may cause a malfunction to the system. On operating voltage Before operating the system, check that the operating voltage of the unit is identical with the voltage of your local power supply. On safety Th e unit is not disconnected from the AC power source (mains) as long as it is connected to the wall socket, even if the unit itself has been turned off . Completely disconnect the power cord
(mains lead) from the wall socket (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself. Should any solid object or liquid get into the system, unplug the system, and have it checked by qualifi ed personnel before operating it again. Th e AC power cord can be changed only by a qualifi ed service facility. A d d i t i o n a l I n f o r m a t i o n Continued 75GB Specifi cations Main unit (HCD-DH7BT/Compact Disc Receiver) AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from 120 10,000 Hz; rated 50 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milliwatts to rated output. Amplifi er section DIN power output (rated) 40 W + 40 W (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) Front speaker:
50 W + 50 W (6 ohms at 1 kHz, 10%
THD) Inputs:
AUDIO IN (stereo mini jack):
Voltage 620 mV, impedance 47 kilohms Outputs:
DIGITAL OUT (square optical connector jack):
Wavelength 660 nm VIDEO OUT (phono jack):
Max. output level 1 Vp-p, unbalanced, Sync. negative load impedance 75 ohms COMPONENT VIDEO OUT:
Y: 1 Vp-p, 75 ohms Pb/Cb: 0.7 Vp-p, 75 ohms Pr/Cr: 0.7 Vp-p, 75 ohms S VIDEO OUT (4-pin/mini-DIN jack):
Y: 1 Vp-p, unbalanced, Sync. negative C: 0.286 Vp-p, load impedance 75 ohms PHONES (stereo mini jack):
accepts headphones of 8 ohms or more On placement Do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. Be careful when placing the unit or speakers on surfaces that have been specially treated
(for example, with wax, oil, polish) as staining or discoloration of the surface may result. If the system is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the lens inside the DVD player, and cause the system to malfunction. In this situation, remove the disc, and leave the system turned on for about an hour until the moisture evaporates. On heat buildup Heat buildup on the unit during operation is normal and is not cause for alarm. Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot. Do not obstruct the ventilation holes. On the speaker system Th is speaker system is not magnetically shielded, and the picture on nearby TV sets may become magnetically distorted. In this situation, turn off the TV, wait 15 to 30 minutes, and turn it back on. If there is no improvement, move the speakers far away from the TV. IMPORTANT NOTICE Caution: If you leave a still video image or on-screen display image displayed on your TV for an extended period of time via this system, you risk permanent damage to your TV screen. Projection TVs are especially susceptible to this. Cleaning the cabinet Clean this system with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol. 76GB CMT-DH7BT.GB.3-097-195-11(1) Blueto Comm B Outpu B Maxim L Freque 2 G Modul F Compa A P A C Suppor R T 1 2 Disc pl System C v Laser:
Laser D E L
Semico
Freque D
C Video N CMT-
Tuner section FM stereo, FM/AM superheterodyne tuner FM tuner section Tuning range:
87.5 108.0 MHz (100 kHz step) Antenna:
FM lead antenna Antenna terminals:
75 ohms unbalanced Intermediate frequency:
10.7 MHz AM tuner section Tuning range:
530 1,710 kHz (with the interval set at 10 kHz) 531 1,710 kHz (with the interval set at 9 kHz) Antenna:
AM loop antenna Antenna terminals:
External antenna terminal Intermediate frequency:
450 kHz Speaker Front speaker (SS-CDH3) Speaker system:
2-way, bass-refl ex type, magnetically shielded Speaker units:
Woofer: 12 cm, cone type Tweeter: 4 cm, cone type Nominal impedance:
6 ohms Dimensions (w/h/d):
Mass:
Approx. 140 250 211 mm Approx. 2.4 kg net per speaker A d d i t i o n a l I n f o r m a t i o n sc en, per no ion DIN) ence) 10%
ctor anced,
gative or Bluetooth section Communication system:
Bluetooth Standard version 2.0 Output:
Bluetooth Standard Power Class 2 Maximum communication range:
Line of sight approx. 10 m1) Frequency band:
2.4 GHz band (2.4000 GHz 2.4835 GHz) Modulation method:
FHSS Compatible Bluetooth profi les2):
A2DP (Advanced Audio Distribution Profi le) AVRCP (Audio Video Remote Control Profi le) Supported codecs:
Receive: SBC (Sub Band Codec), MP3 Transmit: SBC (Sub Band Codec) 1) Th e actual range will vary depending on factors such as obstacles between devices, magnetic fi elds around a microwave oven, static electricity, reception sensitivity, antennas performance, operating system, soft ware application, etc. 2) Bluetooth standard profi les indicate the purpose of Bluetooth communication between devices. Disc player section System:
Compact disc and digital audio and video system Laser:
Laser Diode Properties:
Emission duration: continuous Laser Output*: Less than 1000 W
* Th is output is the value measurement at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. Semiconductor laser:
Frequency response:
(DVD: =650 nm, CD: =790 nm) DVD (PCM 48 kHz): 2 Hz 22 kHz
(1dB) CD: 2 Hz 20 kHz (0.5 dB) Video color system format:
NTSC Continued 77GB CMT-DH7BT.GB.3-097-195-11(1) General Power requirements:
120 V AC, 60 Hz Power consumption:
40 W Dimensions (w/h/d) (Approx.):
190 141 272 mm Mass (Approx.):
xx.x kg Supplied accessories:
Remote Commander (1) R6 (Size AA) batteries (2) AM loop antenna (1) FM lead antenna (1) Video cord (1) Front speaker pads (8) Design and specifi cations are subject to change without notice. Standby power consumption: 0.5 W Halogenated fl ame retardants are not used in the certain printed wiring boards. Guid Use th DIS follow Contro Contro Cont Th e C Examp C O 78GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
Guide to the Control Menu display Use the Control Menu to select a function and to view related information. Press DISPLAY repeatedly to turn on, turn off or change the Control Menu display as follows:
Control Menu display 1 Control Menu display 2 (appears for certain discs only) Control Menu display off Control Menu display 1 Control Menu display Th e Control Menu display 1 and 2 will show diff erent items depending on the disc type. Example: Control Menu display 1 when playing a DVD VIDEO Currently playing title number Currently playing chapter number Total number of titles Control Menu items Selected item Function name of selected Control Menu item Operation message Total number of chapters Playback status ( Playback, Pause, Stop, etc.) Type of disc being played back Elapsed playing time Current setting Options A d d i t i o n a l I n f o r m a t i o n Continued 79GB CMT-DH7BT.GB.3-097-195-11(1) List of Control Menu items Item Item Item Name, Relevant Disc Type, Function TITLE/SCENE/TRACK Selects the title, scene, or track to be played back. CHAPTER/INDEX Selects the chapter or index to be played back. TRACK Selects the track to be played back. ORIGINAL/PLAY LIST Selects the playback sequence either to the originally recorded sequence or to the playlist created on the disc. TIME/TEXT Checks the elapsed playing time and the remaining time. Input the time code for picture and music searching. Displays the text information on the CD-TEXT discs, DVD TEXT discs and MP3 audio tracks. PROGRAM Play back the track in the order you want. SHUFFLE Play back the track in random order. REPEAT Play back a disc repeatedly, the entire disc (all titles/all tracks/all albums) repeatedly or one title/chapter/track/album/fi le repeatedly. A/V SYNC Sets the delay time between the sound and display. PARENTAL CONTROL Set to prohibit playback on this system. 80GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
Item Item Name, Relevant Disc Type, Function SETUP QUICK Setup Use QUICK SETUP to choose the language of the on-screen display and the aspect ratio of the TV. CUSTOM Setup In addition to the Quick Setup setting, you can adjust other settings. RESET Returns the settings in SETUP to the default setting. ALBUM Selects the album to be played back. FILE Selects the JPEG image fi le to be played back. DATE Displays the date when the picture was taken by a digital camera. INTERVAL Specifi es the duration for which the slides are displayed on the TV screen. EFFECT Selects the transition eff ects to be used for changing slides during a slide show. MODE (MP3, JPEG) Selects the data type: MP3 audio track (AUDIO), JPEG image fi le
(IMAGE) or both (AUTO) to be played back when playing a DATA CD/DVD. T y. A d d i t i o n a l I n f o r m a t i o n 81GB CMT-DH7BT.GB.3-097-195-11(1) Pare Code 2044 2047 2046 2057 2070 2079 2090 2092 2115
(Afan) Oromo Code Language Siswati 1513 Sesotho 1514 Sundanese 1515 Swedish 1516 Swahili 1517 Tamil 1521 Telugu 1525 1527 Tajik 1528 Th ai 1529 1531 1532 1534 1535 1538 Punjabi Polish 1539 Pashto; Pushto 1540 1543 Portuguese 1557 Ukrainian Tigrinya Turkmen Tagalog Setswana Tonga Turkish Tsonga Tatar Twi Language code list Th e language spellings conform to the ISO 639:1988 (E/F) standard. Code Language Code Language 1186 Scots Gaelic 1027 Afar 1194 Galician 1028 Abkhazian 1196 Guarani 1032 Afrikaans 1203 Gujarati 1039 Amharic 1209 Hausa 1044 Arabic 1217 Hindi 1045 Assamese 1226 Croatian 1051 Aymara 1229 Hungarian 1052 Azerbaijani 1233 Armenian Bashkir 1053 Interlingua 1235 Byelorussian 1057 Interlingue 1239 Bulgarian 1059 Inupiak 1245 Bihari 1060 Indonesian Bislama 1248 1061 Bengali; Bangla 1253 Icelandic 1066 1254 Tibetan Italian 1067 1257 Hebrew 1070 Breton Japanese 1261 1079 Catalan Yiddish 1269 1093 Corsican 1097 Czech 1283 Javanese 1287 Georgian 1103 Welsh 1297 Kazakh 1105 Danish 1298 Greenlandic 1109 German 1299 Cambodian 1130 Bhutani 1142 Greek 1300 Kannada 1301 Korean English 1144 1305 Kashmiri Esperanto 1145 1307 Kurdish Spanish 1149 1311 Kirghiz Estonian 1150 1151 Basque 1313 1326 Persian 1157 1327 Finnish 1165 1332 Fiji 1166 1334 Faroese 1171 1174 French 1345 Malagasy 1347 Maori Frisian 1181 1183 Irish 1349 Macedonian Code Language 1350 Malayalam 1352 Mongolian 1353 Moldavian 1356 Marathi 1357 Malay 1358 Maltese 1363 Burmese 1365 Nauru 1369 Nepali 1376 Dutch 1379 Norwegian 1393 Occitan 1403 1408 Oriya 1417 1428 1435 1436 1463 Quechua 1481 1482 Kirundi 1483 1489 1491 Kinyarwanda 1495 1498 1501 1502 1503 Latin 1505 Lingala 1506 Laothian Lithuanian 1507 Latvian; Lettish 1508 1509 1511 Albanian 1512 Serbian Sanskrit Sindhi Sangho Serbo-Croatian 1697 Singhalese Slovak Slovenian Samoan Shona Somali Rhaeto-Romance 1564 Urdu 1572 Uzbek 1581 Vietnamese 1587 Volapk 1613 Wolof Xhosa 1632 1665 Yoruba 1684 Chinese Romanian Russian Zulu 1703 Not specifi ed 82GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
ge e n se fied Parental Control area code list Code Area 2044 Argentina 2047 Australia 2046 Austria Belgium 2057 2070 Brazil 2079 Canada 2090 Chile 2092 China 2115 Denmark Finland France Code Area 2165 2174 2109 Germany India 2248 Indonesia 2238 Italy 2254 2276 Japan 2304 Korea 2363 Malaysia Code Area 2362 Mexico 2376 Netherlands 2390 New Zealand 2379 Norway Pakistan 2427 2424 Philippines Portugal 2436 Russia 2489 2501 Singapore Code Area 2149 Spain Sweden 2499 2086 Switzerland 2528 Th ailand 2184 United Kingdom A d d i t i o n a l I n f o r m a t i o n 83GB CMT-DH7BT.GB.3-097-195-11(1) Eff ective communication range Bluetooth devices should be used within approximately 10 meters (unobstructed distance) of each other. Th e eff ective communication range may become shorter under the following conditions. When a person, metal object, wall or other obstruction is between the devices with a Bluetooth connection Locations where a wireless LAN is Around microwave ovens that are in Locations where other electromagnetic installed use waves occur Eff ects of other devices Bluetooth devices and wireless LAN
(IEEE 802.11b/g) use the same frequency band (2.4 GHz). When using your Bluetooth device near a device with wireless LAN capability, electromagnetic interference may occur. Th is could result in lower data transfer rates, noise, or inability to connect. If this happens, try the following remedies:
Try connecting this system and Bluetooth mobile phone or Bluetooth device when you are at least 10 meters away from the wireless LAN equipment. Turn off the power to the wireless LAN equipment when using your Bluetooth device within 10 meters. Bluetooth wireless technology Bluetooth wireless technology is a short-
range wireless technology linking digital devices, such as personal computers and digital still cameras. Using the Bluetooth wireless technology, you can operate the units involved within a range of about 10 meters. Th e Bluetooth wireless technology is commonly used between two devices, but a single device can be connected to multiple devices. You do not need wires to get connected as you do with a USB connection, and you do not need to place the devices face to face as you do with wireless infrared technology. You can use the technology with one Bluetooth device in your bag or pocket. Bluetooth wireless technology is a global standard supported by thousands of companies. Th ese companies produce products that meet the global standard. Supported Bluetooth version and profi les Profi le refers to a standard set of capabilities for various Bluetooth product capabilities. Th is system supports the following Bluetooth version and profi les. Supported Bluetooth version:
Bluetooth Standard version 2.0 Supported Bluetooth profi les:
A2DP (Advanced Audio Distribution Profi le) AVRCP (Audio Video Remote Control Profi le) Eff ect Th e ra may in medic may re off the mobile the fol In h at ga fl am Nea Notes Th is comp as a m comm Howe depen other perfo techn Sony for da infor using Bluet guara have Bluet must presc must when speci the ch Bluet conn meth Noise cut o devic the co surro 84GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
ithin cted e ons. l he ion s e in gnetic N uency gnetic result r
, try ooth AN s LAN tooth Playable Bluetooth devices You can check the websites below for the Bluetooth compatible devices. For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
<http://www.sony.ca/
ElectronicsSupport/>
For customers in Europe:
<http://sonydigital-link.com/dna>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.css.ap.sony.com/>
A d d i t i o n a l I n f o r m a t i o n 85GB Eff ects on other devices Th e radio waves broadcast by this system may interfere with the operation of some medical devices. Since this interference may result in malfunction, always turn off the power on this system, Bluetooth mobile phone and Bluetooth device in the following locations:
In hospitals, on trains, in airplanes, at gas stations, and any place where fl ammable gasses may be present Near automatic doors or fi re alarms Notes Th is system supports security functions that comply with the Bluetooth specifi cation as a means of ensuring security during communication using Bluetooth technology. However, this security may be insuffi cient depending on the setting contents and other factors, so always be careful when performing communication using Bluetooth technology. Sony cannot be held liable in any way for damages or other loss resulting from information leaks during communication using Bluetooth technology. Bluetooth communication is not necessarily guaranteed with all Bluetooth devices that have the same profi le as this system. Bluetooth devices connected with this system must comply with the Bluetooth specifi cation prescribed by the Bluetooth SIG, Inc., and must be certifi ed to comply. However, even when a device complies with the Bluetooth specifi cation, there may be cases where the characteristics or specifi cations of the Bluetooth device make it impossible to connect, or may result in diff erent control methods, display or operation. Noise may occur or the audio may cut off depending on the Bluetooth device connected with this system, the communications environment, or surrounding conditions. CMT-DH7BT.GB.3-097-195-11(1) Glossary Album Section of a music or picture piece on a DATA CD or DATA DVD containing MP3 audio tracks, JPEG image fi les. Chapter Subdivision of a title on a DVD VIDEO. A title is composed of several chapters. Dolby Digital Th is sound format for movie theaters is more advanced than Dolby Surround Pro Logic. In this format, the surround speakers output stereo sound with an expanded frequency range and a subwoofer channel for deep bass is independently provided. Th is format is also called 5.1 because the subwoofer channel is counted as 0.1 channel (since it functions only when a deep bass eff ect is needed). All six channels in this format are recorded separately to realize superior channel separation. Furthermore, since all the signals are processed digitally, less signal degradation occurs. DTS Digital audio compression technology that the Digital Th eater Systems, Inc. developed. Th is technology conforms to 5.1-channel surround. Th e surround channel is stereo and there is discrete subwoofer channel in this format. DTS provides the same 5.1 discrete channels of high quality digital audio. Th e good channel separation is realized because the all channel data is recorded discrete and processed in digital. DVD VIDEO A disc that contains up to 8 hours of moving pictures even though its diameter is the same as a AUDIO CD. Th e data capacity of a single-layer and single-sided DVD VIDEO, at 4.7 GB
(Giga Byte), is 7 times that of a AUDIO CD. Furthermore, the data capacity of a dual-
layer and single-sided DVD VIDEO is 8.5 GB, a single-layer and double-sided DVD VIDEO 9.4 GB, and a dual-layer and double-sided DVD VIDEO 17 GB. Th e picture data uses the MPEG 2 format, one of the worldwide standards for digital compression technology. Th e picture data is compressed to about 1/40 of its original size. Th e DVD VIDEO also uses variable rate coding technology that changes the data to be allocated according to the status of the picture. Th e audio data is recorded in Dolby Digital as well as in PCM, allowing you to enjoy more realistic audio presence. Furthermore, various advanced functions such as the multi-angle, multilingual, and Parental Control functions are provided with the DVD VIDEO. DVD-RW A DVD-RW is a recordable and rewritable disc that is the same size as a DVD VIDEO. Th e DVD-RW has two diff erent modes: VR mode and Video mode. DVD-RWs created in Video mode have the same format as a DVD VIDEO, while discs created in VR (Video Recording) mode allow the contents to be programmed or edited. DVD+
A DVD and re record the DV File A JPEG CD or defi nit consis Film b softw DVD V based based image shown DVD V or sitc
(or 60 Interl Th e In standa image frame betwee lines a lines, a Multi-
Variou camer DVD V 86GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
f ameter nd B dual-
O is ded yer GB. ards Th e 1/40 O ology d e. y you to ctions al, and ided as two eo VD Video s to DVD+RW A DVD+RW (plus RW) is a recordable and rewritable disc. DVD+RWs use a recording format that is comparable to the DVD VIDEO format. File A JPEG image fi le recorded on a DATA CD or DATA DVD. (File is an exclusive defi nition for this system.) A single fi le consists of a single image. Film based software, Video based software DVD VIDEOs can be classifi ed as Film based or Video based soft ware. Film based DVD VIDEOs contain the same images (24 frames per second) that are shown at movie theaters. Video based DVD VIDEOs, such as television dramas or sitcoms, displays images at 30 frames
(or 60 fi elds) per second. Interlace format (Interlaced scanning) Th e Interlace format is the NTSC standard method for displaying TV images at 30 frames per second. Each frame is scanned twice-alternately between the even numbered scanning lines and then odd numbered scanning lines, at 60 times per second. Multi-angle function Various angles, or viewpoints of the video camera, for a scene are recorded on some DVD VIDEOs. Multilingual function Several languages for the sound or subtitles in a picture are recorded on some DVD VIDEOs. Parental Control A function of the DVD VIDEO to limit playback of the disc by the age of the users according to the limitation level in each country. Th e limitation varies from disc to disc; when it is activated, playback is completely prohibited, violent scenes are skipped or replaced with other scenes and so on. Playback Control (PBC) Signals encoded on VIDEO CDs (Version 2.0) to control playback. By using menu screens recorded on VIDEO CDs with PBC functions, you can enjoy playing simple interactive programs, programs with search functions, and so on. Progressive format (sequential scanning) In contrast to the Interlace format, the progressive format can reproduce 50 60 frames per second by reproducing all scanning lines (525 lines for the NTSC system, 625 lines for PAL system). Th e overall picture quality increases and still images, text and horizontal lines appear sharper. Th is format is compatible with the 525 or 625 progressive format. A d d i t i o n a l I n f o r m a t i o n Continued 87GB CMT-DH7BT.GB.3-097-195-11(1) VIDEO CD A compact disc that contains moving pictures. Th e picture data uses the MPEG 1 format, one of the worldwide standards for digital compression technology. Th e picture data is compressed to about 1/140 of its original size. Consequently, a 12 cm VIDEO CD can contain up to 74 minutes of moving pictures. VIDEO CDs also contain compact audio data. Sound outside the range of human hearing are compressed while the sounds we can hear are not compressed. VIDEO CDs can hold 6 times the audio information of conventional AUDIO CDs. Th ere are 2 versions of VIDEO CDs. Version 1.1: You can play back only moving pictures and sounds. Version 2.0: You can play back high-
resolution still pictures and enjoy PBC functions. Th is system conforms to both versions. Region Code Th is system is used to protect copyrights. A region code is allocated on each DVD system or DVD VIDEO according to the sales region. Each region code is shown on the unit as well as on the disc packaging. Th e system can play back the discs that match its region code. Th e system can also play back discs with the ALL mark. Even when the region code is not shown on the DVD VIDEO, the region limit may still be activated. Scene On a VIDEO CD with PBC functions, the menu screens, moving pictures and still pictures are divided into sections called scenes. Title Th e longest section of a picture or a music piece on a DVD VIDEO; a movie, etc., for a picture piece on video soft ware, or the entire album in audio soft ware. Track Section of a picture or a music piece on a VIDEO CD, CD, or MP3. An album is composed of several tracks (MP3 only). 88GB CMT-DH7BT.GB.3-097-195-11(1) Index Numerics 16:9 69 4:3 LETTER BOX 69 4:3 OUTPUT 71 4:3 PAN SCAN 69 A A2DP 41 AVRCP 41 A/V SYNC 41 ALBUM 29 Album 83 ANGLE 40 AUDIO 69 AUDIO DRC 72 B BACKGROUND 70 Batteries 8 BLACK LEVEL 70 BLACK LEVEL
(COMPONENT OUT) 70 Bluetooth device address 41 BLUETOOTH OPR 41 C Category 29 CATEGORY 29 CATEGORY MODE 29 CHAPTER 29 Chapter 83 COLD RESET 75 COLOR SYSTEM (VIDEO CD) 70 OUT 19 COMPONENT VIDEO Continuous play 22 Control Menu Display 89 Controlling the TV 53 CUSTOM 67 CUSTOM PARENTAL CONTROL 60 CUSTOM SETUP 71 D DATA CD 43, 47 DATA DVD 43, 47 DIMMER 59 DISPLAY 52 Dolby Digital 35, 83 DTS 35, 83 DVD 83 DVD+RW 84 DVDs menu 35 DVD-RW 37, 84 E EFFECT 46 F Fast forward 28 Fast reverse 28 FILE 29 File 84 Film based soft ware 84 Freeze Frame 28 Front panel 87 Front panel display 38, 88 H Handling discs 77 I INDEX 29 Instant Advance 22 Instant Replay 22 INTERLACE 20 Interlace format 84 INTERVAL 46 J JPEG 42, 43 L Language Code List 86 LANGUAGE SETUP 69 Listening to other components 23 Listening to the radio xx Listening to TV sound 24 Locating a specifi c point by watching the TV screen 28 M MENU 69 Microphones 54 MODE (MP3, JPEG) 45 MOVIE/MUSIC 25 MP3 42, 43 Multi Session CD 7 Multi-angle function 40, 84 MULTI-DISC RESUME 72 Multilingual function 84 O ORIGINAL 37 OSD 69 Other Component Hookup 21 A d d i t i o n a l I n f o r m a t i o n Continued 89GB CMT-DH7BT.GB.3-097-195-11(1) T THEATRE SYNC 53 TIME/TEXT 29 Timer xx TITLE 29 Title 84 TRACK 29 Track 85 TRACK SELECTION 71 Troubleshooting 77 TV Hookup 18 TV TYPE 69 U Unpacking 82 Usable discs 6 V VIDEO CD 85 X XM 85 XM Radio ID 85 P PARENTAL CONTROL 61 Parental Control 84 Parental Lock 84 Pairing 41 PAUSE MODE 71 Passcode 41 Passkey 41 PBC Playback 49 PIN 41 PICTURE NAVI 30, 44 PLAY LIST 37 Play Timer xx Playback Control (PBC) 84 Playing a CD/tape xx Program Play 31 PROGRESSIVE AUTO 20 Progressive format 19, 84 PROGRESSIVE VIDEO 20 R Radio 51 Radio Stations 50 Rear Panel 87 Region Code 7, 84 Remote 8, 53 Repeat Play 34 RESET 68 Resume Play 30 S Satellite Radio 84 SIRIUS 84 SIRIUS ID 84 S VIDEO 18 Scan 28 SCENE 29 Scene 84 SCREEN SAVER 70 SCREEN SETUP 69 Searching 28 Selecting 25 SETUP 67 Setup Display 67, 93 Shuffl e Play 33 SLEEP 58 Sleep Timer xx Slide Show 45 Slow-motion Play 28 SUBTITLE 41, 69 90GB CMT-DH7BT.GB.3-097-195-11(1) CMT-
A d d i t i o n a l I n f o r m a t i o n 91GB CMT-DH7BT.GB.3-097-195-11(1) Printed in China CMT-DH7BT.GB.3-097-195-11(1)
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-01-18 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2007-01-18
|
||||
1 | Applicant's complete, legal business name |
Sony Corporation
|
||||
1 | FCC Registration Number (FRN) |
0003739166
|
||||
1 | Physical Address |
1-7-1 Konan
|
||||
1 |
Tokyo, N/A 108-0075
|
|||||
1 |
Japan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
h******@AmericanTCB.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
AK8
|
||||
1 | Equipment Product Code |
HCDDH7BT
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
R**** T****
|
||||
1 | Title |
Senior Manager
|
||||
1 | Telephone Number |
81-50********
|
||||
1 | Fax Number |
81-50********
|
||||
1 |
c******@jp.sony.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 04/06/2007 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | DVD Receiver with Bluetooth | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power Output listed is conducted. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
UL Japan, Inc. Yokowa EMC Lab.
|
||||
1 | Name |
T******** H****
|
||||
1 | Telephone Number |
+81-5********
|
||||
1 | Fax Number |
+81-5********
|
||||
1 |
T******@jp.ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0009300 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC